devm_* APIs are device managed and make code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

devm_iio_device_alloc makes code simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

devm_* APIs are device managed and make code simpler.

The memory leak was a lack of freeing the iio_dev structure in the
remove function.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Some of the defaults were missing or unclear. In particular, I suspect
the defaults were documented assuming there were still module parameters
and taking the default module parameters into account. Now, the defaults
are the values that will get chosen when the params passed to
dwc2_hcd_init are all -1.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The HWCFG4 register stores the supported utmi width values (8, 16 or
both). This commit reads that value and validates the configured value
against that.

If no (valid) value is given, the parameter defaulted to 8 bits
previously.  However, the documentation for dwc2_core_params_struct
suggests that the default should have been 16. Also, the pci bindings
explicitely set the value to 16, so this commit changes the default to
16 bits (if supported, 8 bits otherwise).

With the default changed, the value set in pci.c is changed to -1 to
make it autodetected as well.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Before, the hwcfg registers were read at device init time, but
interpreted at various parts in the code. This commit unpacks the hwcfg
register values into a struct with properly labeled variables at init
time, which makes all the other code using these values more consise and
easier to read. Some values that were previously stored in the hsotg
struct are now moved into this new struct as well.

In addition to the hwcfg registers, the contents of some fifo size
registers are also unpacked. The hwcfg registers are read-only, so they
can be safely stored. The fifo size registers are read-write registers,
but their power-on values are significant: they give the maximum depth
of the fifo they describe.

This commit mostly moves code, but also attempts to simplify some
expressions from (val >> shift) & (mask >> shift) to
(val & mask) >> shift.

Finally, all of the parameters read from the hardware are debug printed
after unpacking them, so a bunch of debug prints can be removed from
other places.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bits 16-31 are reserved, so the old code just reads the whole register to
get bits 0-15, assuming the reserved bits would be 0 (which seems true
on current hardware, but who knows...).

This commit properly masks out the reserved bits when reading and
doesn't touch the reserved bits while writing.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For calculating FIFO offsets, the sizes of preceding fifos need to be
known. For filling the GDFIFOCFG register, these fifo sizes were read
from hardware registers. However, these values were written to these
registers just a few lines before, so we can just use the values written
instead.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For some reason, the value of the HPTXFSIZ register was built in the
ptxfsiz variable, while there was also a hptxfsiz variable availble.
Better just use that and remove the (now unused) ptxfsiz variable.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The value of the hcchar register is built from individual values by
shifting and masking. Before, the debug output extracted the individual
values out of the complete hcchar register again by doing the reverse.
This commit makes the debug output use the original values instead.

One debug message got removed, since it would always print a fixed value
of zero.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This line extracted the available queue space without properly shifting
it. Since the code only cared wether it was zero or not, it worked as
expected without the shift, but adding shift makes the code cleaner.

While we're here, store the result in a helper variable that was already
declared to increase readability a bit more.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes expressions from (val >> shift) & (mask >> shift) to
(val & mask) >> shift.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This (read-only) register was read twice, storing it for later use the
second time. Now it is only read once, storing it right away.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Various register fields wider than one bit have constants defined for
their value. Previously, these registers would define the values as they
appear in the register, so shifted to the right to the position the
value appears in the register.

This commit changes those constants to their natural values (e.g, 0, 1,
2, etc.), as they are after shifting the register value to the right.
This also changes all relevant code to shift the values before comparing
them with constants.

This has the advantage that the values can be stored in smaller
variables (now they always require a u32) and makes the handling of
these values more consistent with other register fields that represent
natural numbers instead of enumerations (e.g., number of host channels).
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Previously, the max_packet_count could be set to 1 << x, where x is the
number of bits available (width + 4 in the code). Since 1 << x requires
x + 1 bits to represent, this will not work. The real maximum value is
(1 << x) - 1. This value is already used the default when the set value
is invalid, but the upper limit for the set value was off-by-one.

This change makes the check the same as the one for max_transfer_size,
which was already correct.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A generic set of FIFOSIZE_* constants is defined which applies to all
fifo size and offset registers. It is already used for both the
GNPTXFSIZ and HPTXFSIZ registers, but it applies to DPTXFSIZN as well.
Some of these also had specific constants defined. This patch removes
the specific constants and documents to use the generic constants.

Note that the removed constants weren't actually used. Instead, most of
the related code uses hardcoded masks and shifts. But given that
subsequent patches will be moving that code around and introducing the
constants in the process, this patch leaves those untouched.

Also note that the GRXFSIZ register also contains a fifo size, but
there is no corresponding start address register (it is always the first
fifo in memory), the layout of the GRXFSIZ register is different and
cannot use the same constants.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

__Function__ gets renamed with __func__
Signed-Off-By: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

many of the macros defined in Version.h are not being used,
so we can remove the file.
Signed-off-by: navin patidar <navinp@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

"keyid" is used as an offset into the ->dot11DefKey[] array.  The array
has 4 elements.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a copy and paste bug here so we copy 4 bytes instead of 3.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Obviously it's impossible for ->KeyLength to be both 5 and 13.  I assume
that && was intended here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These should be "<" instead of "<=".  Also we can use the ARRAY_SIZE()
macro.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The result from crystalhd_get_sgle_paddr and crystalhd_get_sgle_len are later
used in calculations, so the result should be in CPU byte ordering.
Signed-off-by: Shaun Laing <shaun@xresource.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 0-DAY kernel build testing backend reports the following compiler
warnings not shown on my compiler version/options:

   drivers/staging/rtl8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_efuse_get':
>> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5836:65: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations]
        sprintf(extra, "%s%02X ", extra, pEfuseHal->fakeEfuseInitMap[i+j]);
                                                                    ^
   drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:5830:3: note: containing loop
      for (i = 0; i < EFUSE_MAP_SIZE; i += 16) {
      ^
>> drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6042:69: warning: iteration 16u invokes undefined behavior [-Waggressive-loop-optimizations]
        sprintf(extra, "%s %02X", extra, pEfuseHal->fakeEfuseModifiedMap[i+j]);
                                                                        ^
   drivers/staging/rtl8188eu/os_dep/ioctl_linux.c:6036:3: note: containing loop
      for (i = 0; i < EFUSE_MAP_SIZE; i += 16) {
      ^

The problem is due to improper settings for some of the EFUSE_XXX defines such that
EFUSE_MAP_SIZE was larger than the sizes of the marked arrays. Thanks to
Fengguang Wu for helping me understand the root cause.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/dgap/dgap_driver.c: In function ‘dgap_cleanup_module’:
drivers/staging/dgap/dgap_driver.c:423: error: implicit declaration of function ‘kfree’
drivers/staging/dgap/dgap_driver.c: In function ‘dgap_driver_kzmalloc’:
drivers/staging/dgap/dgap_driver.c:940: error: implicit declaration of function ‘kmalloc’
drivers/staging/dgap/dgap_driver.c:940: warning: initialization makes pointer from integer without a cast
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patchs adds a TODO for the driver.
Signed-off-by: Lidza Louina <lidza.louina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.12c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of new drivers, cleanups and features for IIO in the 3.12 cycle.

New drivers

1) Bosh BMA180 accelerometer + a new sysfs abi element, power_mode to
   allow for device that trade off accuracy and power usage.

Cleanups

1) Another lot of devm_iio_device_alloc patches
2) An code ordering bug in the twl6030 driver introduced earlier in this
   cycle.

New features

1) at91 adc driver rework to support a wider range of parts and drop
   the necessity for some of the current device tree elements.  This is
   a precursor to introducing input support which is still under review.

For at91 boards, there are different IPs for adc. Different IPs has different
STARTUP & PRESCAL mask in ADC_MR.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

As use the multiple compatible string, we can remove hardware register in dt.

CC: devicetree@vger.kernel.org
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Replace with struct vnt_rcb
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed 3 instances of user-visible string being broken into two string.
Fixed 2 instances of illegal whitespace.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: baseband.h re: baseband.c:877:26: sparse: incorrect type in assignment (different base types)

sparse warnings: (new ones prefixed by >>)
...
>> drivers/staging/vt6656/baseband.c:877:26: sparse: incorrect type in assignment (different base types)
   drivers/staging/vt6656/baseband.c:877:26:    expected unsigned short [unsigned] [usertype] len
   drivers/staging/vt6656/baseband.c:877:26:    got restricted __le16 [usertype] <noident>
>> drivers/staging/vt6656/baseband.c:880:26: sparse: incorrect type in assignment (different base types)
   drivers/staging/vt6656/baseband.c:880:26:    expected unsigned short [unsigned] [usertype] len
   drivers/staging/vt6656/baseband.c:880:26:    got restricted __le16 [usertype] <noident>

vnt_phy_field member len should be __le16.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: kbuild-all@01.org
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Return error if we receive write(), while PD is not connected.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Incorrect error number was returned here (EPERM), ENXIO is more
appropriate.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Buffer depth of 50 units is not sufficient when there is considerable delay
occuring on air due to interference, increase ISOC IN buffer depth to 100 units.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed the header files included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wlan_bssdef.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Include version.h header file as detected by versioncheck.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>