- 21 Jun, 2018 11 commits
-
-
Anders Roxell authored
sha: 702353b5 ("selftest: add test for TCP_INQ") forgot to add tcp_inq to .gitignore. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Harini Katakam authored
When delta passed to gem_ptp_adjtime is negative, the sign is maintained in the ns_to_timespec64 conversion. Hence timespec_add should be used directly. timespec_sub will just subtract the negative value thus increasing the time difference. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Xin Long authored
Commit 296d4856 ("ipvlan: inherit MTU from master device") adjusted the mtu from the master device when creating a ipvlan device, but it would also override the mtu value set in rtnl_create_link. It causes IFLA_MTU param not to take effect. So this patch is to not adjust the mtu if IFLA_MTU param is set when creating a ipvlan device. Fixes: 296d4856 ("ipvlan: inherit MTU from master device") Reported-by:
Jianlin Shi <jishi@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
Currently it is incrementing SctpFragUsrMsgs when the user message size is of the exactly same size as the maximum fragment size, which is wrong. The fix is to increment it only when user message is bigger than the maximum fragment size. Fixes: bfd2e4b8 ("sctp: refactor sctp_datamsg_from_user") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@redhat.com> Signed-off-by:
-
Eric Dumazet authored
After commit 9facc336 ("bpf: reject any prog that failed read-only lock") offsetof(struct bpf_binary_header, image) became 3 instead of 4, breaking powerpc BPF badly, since instructions need to be word aligned. Fixes: 9facc336 ("bpf: reject any prog that failed read-only lock") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Antoine Tenart authored
When injecting frames in the Ocelot switch driver an injection header (IFH) should be used to configure various parameters related to a given frame, such as the port onto which the frame should be departed or its vlan id. Other parameters in the switch configuration can led to an injected frame being sent without an IFH but this led to various issues as the per-frame parameters are then not used. This is especially true when using multiple ports for injection. The IFH was injected with the wrong endianness which led to the switch not taking it into account as the IFH_INJ_BYPASS bit was then unset. (The bit tells the switch to use the IFH over its internal configuration). This patch fixes it. In addition to the endianness fix, the IFH is also fixed. As it was (unwillingly) unused, some of its fields were not configured the right way. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Bartosz Golaszewski authored
Device tree based systems without of_dev_auxdata will have the mdio device named differently than "davinci_mdio(.0)". In this case use the device's parent's compatible string for matching Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Ville Syrjälä authored
Pass the correct thing to rtl8169_interrupt() from netpoll. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: netdev@vger.kernel.org Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: David S. Miller <davem@davemloft.net> Fixes: ebcd5daa ("r8169: change interrupt handler argument type") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Vakul Garg authored
In function strp_data_ready(), it is useless to call queue_work if the state of strparser is already paused. The state checking should be done before calling queue_work. The change reduces the context switches and improves the ktls-rx throughput by approx 20% (measured on cortex-a53 based platform). Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Acked-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
-
Anders Roxell authored
Add fragments to pass bridge and vlan tests. Fixes: 33b01b7b ("selftests: add rtnetlink test script") Signed-off-by:
-
Matteo Croce authored
Use $(OBJDUMP) instead of literal 'objdump' to avoid using host toolchain when cross compiling. Fixes: 421780fd ("bpfilter: fix build error") Signed-off-by:
Matteo Croce <mcroce@redhat.com> Reported-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
- 20 Jun, 2018 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Here are eight fairly small fixes collected over the last two weeks. Regression and crashing bug fixes: - mlx4/5: Fixes for issues found from various checkers - A resource tracking and uverbs regression in the core code - qedr: NULL pointer regression found during testing - rxe: Various small bugs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/rxe: Fix missing completion for mem_reg work requests RDMA/core: Save kernel caller name when creating CQ using ib_create_cq() IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()' RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM IB/mlx5: Fix return value check in flow_counters_set_data() IB/mlx5: Fix memory leak in mlx5_ib_create_flow IB/rxe: avoid double kfree skb
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann. 2) Fix ATM VCC memory accounting, from David Woodhouse. 3) fib6_info objects need RCU freeing, from Eric Dumazet. 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern. 5) Fix clobbered error code in enic_open() failure path, from Govindarajulu Varadarajan. 6) Propagate dev_get_valid_name() error returns properly, from Li RongQing. 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski. 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from Davide Caratti. 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) ip: limit use of gso_size to udp stmmac: fix DMA channel hang in half-duplex mode net: stmmac: socfpga: add additional ocp reset line for Stratix10 net: sungem: fix rx checksum support bpfilter: ignore binary files bpfilter: fix build error net/usb/drivers: Remove useless hrtimer_active check net/sched: act_ife: preserve the action control in case of error net/sched: act_ife: fix recursive lock and idr leak net: ethernet: fix suspend/resume in davinci_emac net: propagate dev_get_valid_name return code enic: do not overwrite error code net/tcp: Fix socket lookups with SO_BINDTODEVICE ptp: replace getnstimeofday64() with ktime_get_real_ts64() net/ipv6: respect rcu grace period before freeing fib6_info net: net_failover: fix typo in net_failover_slave_register() ipvlan: use ETH_MAX_MTU as max mtu net: hamradio: use eth_broadcast_addr enic: initialize enic->rfs_h.lock in enic_probe MAINTAINERS: Add Sam as the maintainer for NCSI ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke - fix for hibernation in Intel ISH driver, from Even Xu - crash fix for hid-steam driver, from Rodrigo Rivas Costa - new device ID addition to google-hammer driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation HID: steam: use hid_device.driver_data instead of hid_set_drvdata() HID: google: Add support for whiskers
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping rename from Christoph Hellwig: "Move all the dma-mapping code to kernel/dma and lose their dma-* prefixes" * tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move all DMA mapping code to kernel/dma dma-mapping: use obj-y instead of lib-y for generic dma ops
-
Jason Gerecke authored
The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains a typo which defines an incorrect logical maximum Y value. This causes a small portion of the bottom of the tablet to become unusable (both because the area is below the "bottom" of the tablet and because 'wacom_wac_event' ignores out-of-range values). It also results in a skewed aspect ratio. To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites the data with the correct value. Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> CC: stable@vger.kernel.org # v4.10+ Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
Even Xu authored
Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by:
Even Xu <even.xu@intel.com> Acked-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Rodrigo Rivas Costa authored
When creating the low-level hidraw device, the reference to steam_device was stored using hid_set_drvdata(). But this value is not guaranteed to be kept when set before calling probe. If this pointer is reset, it crashes when opening the emulated hidraw device. It looks like hid_set_drvdata() is for users "avobe" this hid_device, while hid_device.driver_data it for users "below" this one. In this case, we are creating a virtual hidraw device, so we must use hid_device.driver_data. Signed-off-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Tested-by:
Mariusz Ceier <mceier+kernel@gmail.com> Signed-off-by:
-
Linus Torvalds authored
The rewrite of the cmdline fetching missed the fact that we used to also return the final terminating NUL character of the last argument. I hadn't noticed, and none of the tools I tested cared, but something obviously must care, because Michal Kubecek noticed the change in behavior. Tweak the "find the end" logic to actually include the NUL character, and once past the eend of argv, always start the strnlen() at the expected (original) argument end. This whole "allow people to rewrite their arguments in place" is a nasty hack and requires that odd slop handling at the end of the argv array, but it's our traditional model, so we continue to support it. Repored-and-bisected-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Willem de Bruijn authored
The ipcm(6)_cookie field gso_size is set only in the udp path. The ip layer copies this to cork only if sk_type is SOCK_DGRAM. This check proved too permissive. Ping and l2tp sockets have the same type. Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to exclude ping sockets. v1 -> v2 - remove irrelevant whitespace changes Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Reported-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Bhadram Varka authored
HW does not support Half-duplex mode in multi-queue scenario. Fix it by not advertising the Half-Duplex mode if multi-queue enabled. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
-
Dinh Nguyen authored
The Stratix10 platform has an additional reset line, OCP(Open Core Protocol), that also needs to get deasserted for the stmmac ethernet controller to work. Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build dwmac-socfpga. Also, remove the redundant check for the reset controller pointer. The reset driver already checks for the pointer and returns 0 if the pointer is NULL. Signed-off-by:
Dinh Nguyen <dinguyen@kernel.org> Signed-off-by:
-
Eric Dumazet authored
After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), sungem owners reported the infamous "eth0: hw csum failure" message. CHECKSUM_COMPLETE has in fact never worked for this driver, but this was masked by the fact that upper stacks had to strip the FCS, and therefore skb->ip_summed was set back to CHECKSUM_NONE before my recent change. Driver configures a number of bytes to skip when the chip computes the checksum, and for some reason only half of the Ethernet header was skipped. Then a second problem is that we should strip the FCS by default, unless the driver is updated to eventually support NETIF_F_RXFCS in the future. Finally, a driver should check if NETIF_F_RXCSUM feature is enabled or not, so that the admin can turn off rx checksum if wanted. Many thanks to Andreas Schwab and Mathieu Malaterre for their help in debugging this issue. Signed-off-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Mathieu Malaterre <malat@debian.org> Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Tested-by:
-
Matteo Croce authored
net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is enabled, add it to .gitignore to avoid committing it. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by:
-
Matteo Croce authored
bpfilter Makefile assumes that the system locale is en_US, and the parsing of objdump output fails. Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns only 2 processes instead of 7. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by:
-
Daniel Lezcano authored
The code does: if (hrtimer_active(&t)) hrtimer_cancel(&t); However, hrtimer_cancel() checks if the timer is active, so the test above is pointless. Signed-off-by:Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Davide Caratti authored
in the following script # tc actions add action ife encode allow prio pass index 42 # tc actions replace action ife encode allow tcindex drop index 42 the action control should remain equal to 'pass', if the kernel failed to replace the TC action. Pospone the assignment of the action control, to ensure it is not overwritten in the error path of tcf_ife_init(). Fixes: ef6980b6 ("introduce IFE action") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Davide Caratti authored
a recursive lock warning [1] can be observed with the following script, # $TC actions add action ife encode allow prio pass index 42 IFE type 0xED3E # $TC actions replace action ife encode allow tcindex pass index 42 in case the kernel was unable to run the last command (e.g. because of the impossibility to load 'act_meta_skbtcindex'). For a similar reason, the kernel can leak idr in the error path of tcf_ife_init(), because tcf_idr_release() is not called after successful idr reservation: # $TC actions add action ife encode allow tcindex index 47 IFE type 0xED3E RTNETLINK answers: No such file or directory We have an error talking to the kernel # $TC actions add action ife encode allow tcindex index 47 IFE type 0xED3E RTNETLINK answers: No space left on device We have an error talking to the kernel # $TC actions add action ife encode use mark 7 type 0xfefe pass index 47 IFE type 0xFEFE RTNETLINK answers: No space left on device We have an error talking to the kernel Since tcfa_lock is already taken when the action is being edited, a call to tcf_idr_release() wrongly makes tcf_idr_cleanup() take the same lock again. On the other hand, tcf_idr_release() needs to be called in the error path of tcf_ife_init(), to undo the last tcf_idr_create() invocation. Fix both problems in tcf_ife_init(). Since the cleanup() routine can now be called when ife->params is NULL, also add a NULL pointer check to avoid calling kfree_rcu(NULL, rcu). [1] ============================================ WARNING: possible recursive locking detected 4.17.0-rc4.kasan+ #417 Tainted: G E -------------------------------------------- tc/3932 is trying to acquire lock: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_cleanup+0x19/0x80 [act_ife] but task is already holding lock: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&p->tcfa_lock)->rlock); lock(&(&p->tcfa_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by tc/3932: #0: 000000007ca8e990 (rtnl_mutex){+.+.}, at: tcf_ife_init+0xf61/0x13c0 [act_ife] #1: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife] stack backtrace: CPU: 3 PID: 3932 Comm: tc Tainted: G E 4.17.0-rc4.kasan+ #417 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x9a/0xeb __lock_acquire+0xf43/0x34a0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? __mutex_lock+0x62f/0x1240 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 ? lock_acquire+0x10b/0x330 lock_acquire+0x10b/0x330 ? tcf_ife_cleanup+0x19/0x80 [act_ife] _raw_spin_lock_bh+0x38/0x70 ? tcf_ife_cleanup+0x19/0x80 [act_ife] tcf_ife_cleanup+0x19/0x80 [act_ife] __tcf_idr_release+0xff/0x350 tcf_ife_init+0xdde/0x13c0 [act_ife] ? ife_exit_net+0x290/0x290 [act_ife] ? __lock_is_held+0xb4/0x140 tcf_action_init_1+0x67b/0xad0 ? tcf_action_dump_old+0xa0/0xa0 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? memset+0x1f/0x40 tcf_action_init+0x30f/0x590 ? tcf_action_init_1+0xad0/0xad0 ? memset+0x1f/0x40 tc_ctl_action+0x48e/0x5e0 ? mutex_lock_io_nested+0x1160/0x1160 ? tca_action_gd+0x990/0x990 ? sched_clock+0x5/0x10 ? find_held_lock+0x39/0x1d0 rtnetlink_rcv_msg+0x4da/0x990 ? validate_linkmsg+0x680/0x680 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 netlink_rcv_skb+0x127/0x350 ? validate_linkmsg+0x680/0x680 ? netlink_ack+0x970/0x970 ? __kmalloc_node_track_caller+0x304/0x3a0 netlink_unicast+0x40f/0x5d0 ? netlink_attachskb+0x580/0x580 ? _copy_from_iter_full+0x187/0x760 ? import_iovec+0x90/0x390 netlink_sendmsg+0x67f/0xb50 ? netlink_unicast+0x5d0/0x5d0 ? copy_msghdr_from_user+0x206/0x340 ? netlink_unicast+0x5d0/0x5d0 sock_sendmsg+0xb3/0xf0 ___sys_sendmsg+0x60a/0x8b0 ? copy_msghdr_from_user+0x340/0x340 ? lock_downgrade+0x5e0/0x5e0 ? tty_write_lock+0x18/0x50 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 ? lock_downgrade+0x5e0/0x5e0 ? lock_acquire+0x10b/0x330 ? __audit_syscall_entry+0x316/0x690 ? current_kernel_time64+0x6b/0xd0 ? __fget_light+0x55/0x1f0 ? __sys_sendmsg+0xd2/0x170 __sys_sendmsg+0xd2/0x170 ? __ia32_sys_shutdown+0x70/0x70 ? syscall_trace_enter+0x57a/0xd60 ? rcu_read_lock_sched_held+0xdc/0x110 ? __bpf_trace_sys_enter+0x10/0x10 ? do_syscall_64+0x22/0x480 do_syscall_64+0xa5/0x480 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fd646988ba0 RSP: 002b:00007fffc9fab3c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fffc9fab4f0 RCX: 00007fd646988ba0 RDX: 0000000000000000 RSI: 00007fffc9fab440 RDI: 0000000000000003 RBP: 000000005b28c8b3 R08: 0000000000000002 R09: 0000000000000000 R10: 00007fffc9faae20 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffc9fab504 R14: 0000000000000001 R15: 000000000066c100 Fixes: 4e8c8615 ("net sched: net sched: ife action fix late binding") Fixes: ef6980b6 ("introduce IFE action") Signed-off-by:
-
- 19 Jun, 2018 12 commits
-
-
Bartosz Golaszewski authored
This patch reverts commit 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") and adds a comment which should stop anyone from reintroducing the same "fix" in the future. We can't use bus_find_device_by_name() here because the device name is not guaranteed to be 'davinci_mdio'. On some systems it can be 'davinci_mdio.0' so we need to use strncmp() against the first part of the string to correctly match it. Fixes: 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") Cc: stable@vger.kernel.org Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Li RongQing authored
if dev_get_valid_name failed, propagate its return code and remove the setting err to ENODEV, it will be set to 0 again before dev_change_net_namespace exits. Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
In failure path, we overwrite err to what vnic_rq_disable() returns. In case it returns 0, enic_open() returns success in case of error. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: e8588e26 ("enic: enable rq before updating rq descriptors") Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
David Ahern authored
Similar to 69678bcd ("udp: fix SO_BINDTODEVICE"), TCP socket lookups need to fail if dev_match is not true. Currently, a packet to a given port can match a socket bound to device when it should not. In the VRF case, this causes the lookup to hit a VRF socket and not a global socket resulting in a response trying to go through the VRF when it should not. Fixes: 3fa6f616 ("net: ipv4: add second dif to inet socket lookups") Fixes: 4297a0ef ("net: ipv6: add second dif to inet6 socket lookups") Reported-by:
Lou Berger <lberger@labn.net> Diagnosed-by:
Renato Westphal <renato@opensourcerouting.org> Tested-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
getnstimeofday64() is deprecated and getting replaced throughout the kernel with ktime_get_*() based helpers for a more consistent interface. The two functions do the exact same thing, so this is just a cosmetic change. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Eric Dumazet authored
syzbot reported use after free that is caused by fib6_info being freed without a proper RCU grace period. CPU: 0 PID: 1407 Comm: udevd Not tainted 4.17.0+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __read_once_size include/linux/compiler.h:188 [inline] find_rr_leaf net/ipv6/route.c:705 [inline] rt6_select net/ipv6/route.c:761 [inline] fib6_table_lookup+0x12b7/0x14d0 net/ipv6/route.c:1823 ip6_pol_route+0x1c2/0x1020 net/ipv6/route.c:1856 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2082 fib6_rule_lookup+0x211/0x6d0 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2110 ip6_route_output include/net/ip6_route.h:82 [inline] icmpv6_xrlim_allow net/ipv6/icmp.c:211 [inline] icmp6_send+0x147c/0x2da0 net/ipv6/icmp.c:535 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_link_failure+0xa5/0x790 net/ipv6/route.c:2244 dst_link_failure include/net/dst.h:427 [inline] ndisc_error_report+0xd1/0x1c0 net/ipv6/ndisc.c:695 neigh_invalidate+0x246/0x550 net/core/neighbour.c:892 neigh_timer_handler+0xaf9/0xde0 net/core/neighbour.c:978 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:404 exiting_irq arch/x86/include/asm/apic.h:527 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 </IRQ> RIP: 0010:strlen+0x5e/0xa0 lib/string.c:482 Code: 24 00 74 3b 48 bb 00 00 00 00 00 fc ff df 4c 89 e0 48 83 c0 01 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 0f b6 14 1a 38 ca 7f 04 <84> d2 75 23 80 38 00 75 de 48 83 c4 08 4c 29 e0 5b 41 5c 5d c3 48 RSP: 0018:ffff8801af117850 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff880197f53bd0 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff81c5b06c RDI: ffff880197f53bc0 RBP: ffff8801af117868 R08: ffff88019a976540 R09: 0000000000000000 R10: ffff88019a976540 R11: 0000000000000000 R12: ffff880197f53bc0 R13: ffff880197f53bc0 R14: ffffffff899e4e90 R15: ffff8801d91c6a00 strlen include/linux/string.h:267 [inline] getname_kernel+0x24/0x370 fs/namei.c:218 open_exec+0x17/0x70 fs/exec.c:882 load_elf_binary+0x968/0x5610 fs/binfmt_elf.c:780 search_binary_handler+0x17d/0x570 fs/exec.c:1653 exec_binprm fs/exec.c:1695 [inline] __do_execve_file.isra.35+0x16fe/0x2710 fs/exec.c:1819 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1959 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1576a46207 Code: 77 19 f4 48 89 d7 44 89 c0 0f 05 48 3d 00 f0 ff ff 76 e0 f7 d8 64 41 89 01 eb d8 f7 d8 64 41 89 01 eb df b8 3b 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 02 f3 c3 48 8b 15 00 8c 2d 00 f7 d8 64 89 02 RSP: 002b:00007ffff2784568 EFLAGS: 00000202 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f1576a46207 RDX: 0000000001215b10 RSI: 00007ffff2784660 RDI: 00007ffff2785670 RBP: 0000000000625500 R08: 000000000000589c R09: 000000000000589c R10: 0000000000000000 R11: 0000000000000202 R12: 0000000001215b10 R13: 0000000000000007 R14: 0000000001204250 R15: 0000000000000005 Allocated by task 12188: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620 kmalloc include/linux/slab.h:513 [inline] kzalloc include/linux/slab.h:706 [inline] fib6_info_alloc+0xbb/0x280 net/ipv6/ip6_fib.c:152 ip6_route_info_create+0x782/0x2b50 net/ipv6/route.c:3013 ip6_route_add+0x23/0xb0 net/ipv6/route.c:3154 ipv6_route_ioctl+0x5a5/0x760 net/ipv6/route.c:3660 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973 sock_ioctl+0x30d/0x680 net/socket.c:1097 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 1402: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xd9/0x260 mm/slab.c:3813 fib6_info_destroy+0x29b/0x350 net/ipv6/ip6_fib.c:207 fib6_info_release include/net/ip6_fib.h:286 [inline] __ip6_del_rt_siblings net/ipv6/route.c:3235 [inline] ip6_route_del+0x11c4/0x13b0 net/ipv6/route.c:3316 ipv6_route_ioctl+0x616/0x760 net/ipv6/route.c:3663 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973 sock_ioctl+0x30d/0x680 net/socket.c:1097 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801b5df2580 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 8 bytes inside of 256-byte region [ffff8801b5df2580, ffff8801b5df2680) The buggy address belongs to the page: page:ffffea0006d77c80 count:1 mapcount:0 mapping:ffff8801da8007c0 index:0xffff8801b5df2e40 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006c5cc48 ffffea0007363308 ffff8801da8007c0 raw: ffff8801b5df2e40 ffff8801b5df2080 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b5df2480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b5df2500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc > ffff8801b5df2580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801b5df2600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b5df2680: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers") Signed-off-by: -
Liran Alon authored
Sync both unicast and multicast lists instead of unicast twice. Fixes: cfc80d9a ("net: Introduce net_failover driver") Reviewed-by:
Joao Martins <joao.m.martins@oracle.com> Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Xin Long authored
Similar to the fixes on team and bonding, this restores the ability to set an ipvlan device's mtu to anything higher than 1500. Fixes: 91572088 ("net: use core MTU range checking in core net infra") Signed-off-by:
-
Stefan Agner authored
The array bpq_eth_addr is only used to get the size of an address, whereas the bcast_addr is used to set the broadcast address. This leads to a warning when using clang: drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not needed and will not be emitted [-Wunneeded-internal-declaration] static char bpq_eth_addr[6]; ^ Remove both variables and use the common eth_broadcast_addr to set the broadcast address. Signed-off-by:Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Govindarajulu Varadarajan authored
lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
-
David S. Miller authored
Joel Stanley says: ==================== Slience NCSI logging v2: Fix indent issue and commit message based on Joe's feedback Add Sam's acks Here are three changes to silence unnecessary warnings in the ncsi code. The final patch adds Sam as the maintainer for NCSI. ==================== Signed-off-by: -
Joel Stanley authored
Sam has been handing the maintenance of NCSI for a number release cycles now. Acked-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
