- 10 Dec, 2013 4 commits
-
-
git://github.com/at91linux/linux-at91Kevin Hilman authored
From Nicolas Ferre: First DT pull-request for 3.14 - many little corrections and documentation updates - LCD FB Device Tree for at91sam9263 and at91sam9g45 boards - crypto peripherals DT entries + DMA specification - new Cosino board * tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits) ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order ARM: at91: dt: at91rm9200ek: add emac and nor flash support ARM: at91: add uart aliases to sama5d3 dtsi ARM: at91: add i2c2 pinctrl speficifation to sama5d3 DT ARM: at91: Animeo IP: fix mtd partition table ARM: at91: at91sam9g45: add i2c pinctrl ARM: at91: at91sam9g45: set default mmc pinctrl-names ARM: at91: sama5d3: enable qt1070 as a wakeup source ARM: at91: add support for Cosino board series by HCE Engineering ARM: at91/dt/sama5d3: add DMA information to SHA/AES/TDES nodes ARM: at91/dt/trivial: before sama5d3, Atmel MPU were using at91 prefix ARM: at91/dt/trivial: use macro for AES irq type ARM: at91: sam9263ek: add dt lcd support ARM: at91: at9sam9m10g45ek: add dt lcd support ARM: at91: sam9263: add fb dt support ARM: at91: sam9g45: add fb dt support ARM: at91/dt: binding: add missing compatibility string in SDRAM/DDR documentation ARM: at91/dt: binding: add precision to AIC documentation ARM: at91/dt: add atmel,pullup-gpio to at91rm9200ek usb1 definition ARM: at91/dt: add ethernet phy to at91rm9200ek board ... Signed-off-by:
Kevin Hilman <khilman@linaro.org>
-
Josh Wu authored
Add .dts and .dtsi file to support sama5d36ek board. Also update the the comments for sama5d36 in sama5d3.dtsi. Signed-off-by:
Josh Wu <josh.wu@atmel.com> Acked-by:
Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Kevin Hilman authored
-
git://git.infradead.org/linux-mvebuKevin Hilman authored
From Jason Cooper: mvebu DT changes for v3.14 (set #2) - mvebu - Netgear ReadyNAS cleanup - add Netgear ReadyNAS 2120 - kirkwood - Netgear ReadyNAS cleanup - add Netgear ReadyNAS NV+ v2 * tag 'mvebu-dt-3.14-2' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: Add support for NETGEAR ReadyNAS NV+ v2 ARM: mvebu: Add Netgear ReadyNAS 2120 board ARM: mvebu: Fix whitespace in NETGEAR ReadyNAS .dts files ARM: mvebu: NETGEAR ReadyNAS 104 .dts cleanup ARM: mvebu: NETGEAR ReadyNAS 102 .dts cleanup ARM: kirkwood: NETGEAR ReadyNAS Duo v2 .dts cleanup Signed-off-by:
-
- 09 Dec, 2013 21 commits
-
-
Nicolas Ferre authored
Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: remove one macb node too many] Signed-off-by:
-
Nicolas Ferre authored
Signed-off-by: -
Nicolas Ferre authored
Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
Update to production one. Signed-off-by:
-
Ludovic Desroches authored
Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by:
-
Ludovic Desroches authored
pinctrl-names property was missing from mmc nodes. Cc: <stable@vger.kernel.org> #3.11+ Signed-off-by:
-
Bo Shen authored
Enable qt1070 keyboard as a wakeup source on sama5d3xek board. Signed-off-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
-
Rodolfo Giometti authored
This patch adds the Cosino at91sam9g35 based CPU module and the Cosino Mega 2560 extension board. Web site: http://www.cosino.itSigned-off-by:
Rodolfo Giometti <giometti@linux.it> [plagnioj@jcrosoft.com: added "at91-" to files, pinctrl fixed, removed unneeded stuff] Acked-by:
-
Nicolas Ferre authored
Signed-off-by: -
Nicolas Ferre authored
Change the sha/aes/tdes compatibility string to match common case for the at91sam9g45 family which is to keep the at91 prefix. Signed-off-by: -
Nicolas Ferre authored
Signed-off-by: -
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by:
-
Nicolas Ferre authored
The "atmel,at91rm9200-sdramc" was missing from binding documentation. Signed-off-by:
-
Nicolas Ferre authored
In response to the "undocumented compatible strings" message, here is a patch which is adding the precision of two "chips" that should be used for the "atmel,<chip>-aic" compatibility string. Signed-off-by:
-
Boris BREZILLON authored
Signed-off-by:
-
Boris BREZILLON authored
Add ethernet phy node in at91rm9200ek.dts. The reg register is not specified, as it may differ depending on the init process of the board: ADDR0/1 phy pins are connected to PA13/14 rm9200 pins. Which means the phy will take its address from these pins during the reset process. The macb driver will launch a full scan on the mdio bus to discover the phy address. Signed-off-by:
-
Nicolas Ferre authored
Swap names as they were improperly defined. Signed-off-by:
-
- 04 Dec, 2013 11 commits
-
-
http://git.stlinux.com/devel/kernel/linux-stiOlof Johansson authored
From Srinivas Handagatla, DT updates for STi platforms. * tag 'DT-for-v3.14-part-1' of http://git.stlinux.com/devel/kernel/linux-sti: ARM: STi: Add I2C config to B2000 and B2020 boards ARM: STi: Supply I2C configuration to STiH415 SoC ARM: STi: Supply I2C configuration to STiH416 SoC ARM: STi: OF: Fix a typo in pincfg header Signed-off-by:
Olof Johansson <olof@lixom.net>
-
git://github.com/at91linux/linux-at91Olof Johansson authored
From Nicolas Ferre: AT91: Move to Common Clock Framework and sama5d3 implementation This is the first step to move AT91 to the CCF. - core CCF and drivers for most of the clocks - use of CCF for sama5d3 (100% DT-based) * tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: (22 commits) ARM: at91/dt: remove old clk material ARM: at91: move sama5d3 SoC to common clk ARM: at91/dt: define sama5d3xek's main clk frequency ARM: at91/dt: define sama5d3 clocks ARM: at91: prepare common clk transition for sama5d3 SoC ARM: at91: prepare sama5 dt boards transition to common clk ARM: at91: add new compatible strings for pmc driver ARM: at91: move pit timer to common clk framework dt: binding: add at91 clks dt bindings documentation clk: at91: add PMC smd clock clk: at91: add PMC usb clock clk: at91: add PMC utmi clock clk: at91: add PMC programmable clocks clk: at91: add PMC peripheral clocks clk: at91: add PMC system clocks clk: at91: add PMC master clock clk: at91: add PMC pll clocks clk: at91: add PMC main clock clk: at91: add PMC macro file for dt definitions clk: at91: add PMC base support ... Signed-off-by:
-
Olof Johansson authored
Merging in post-rc1 fixes that have gone into rc2/3 to avoid later conflicts. * commit 'fixes': (39 commits) arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk arm: socfpga: Enable ARM_TWD for socfpga ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support ARM: multi_v7_defconfig: enable network for BeagleBone Black ARM: dts: Fix the name of supplies for smsc911x shared by OMAP ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm ARM: dts: omap3-beagle: Add omap-twl4030 audio support ARM: dts: omap4-sdp: Fix pin muxing for wl12xx ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM ARM: at91: add usart3 alias to dtsi ARM: at91: sama5d3: reduce TWI internal clock frequency mmc: omap: Fix I2C dependency and make driver usable with device tree mmc: omap: Fix DMA configuration to not rely on device id ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi ARM: dts: AM33XX IGEP0033: add USB support ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support ARM: dts: AM33XX BASE0033: add pinmux and user led support ... Signed-off-by: -
Maxime COQUELIN authored
This patch supplies I2C configuration to B2000 and B2020 based on either STiH415 or STiH416 SoCs. Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com> Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@st.com>
-
Maxime COQUELIN authored
This patch supplies I2C configuration to STiH415 SoC. Signed-off-by:
-
Maxime COQUELIN authored
This patch supplies I2C configuration to STiH416 SoC. Signed-off-by:
-
Srinivas Kandagatla authored
This patch fixes a typo for OD define in st-pincfg header file. Reported-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
From Jason Cooper: mvebu DT changes for v3.14 - mvebu: - remove unneeded OS-specific properties from led nodes - add NAND controller to Armada boards - add sata leds to readynas 104 - add gpio-poweroff to readynas duo v2 - kirkwood: - comment cleanup in sheevaplug files - default pinctrl for sdio - sdio in guruplug is non-removable - orion5x: - typo fix - dove: - typo fix - add PMU interrupt controller and RTC interrupt via same * tag 'mvebu-dt-3.14' of git://git.infradead.org/linux-mvebu: ARM: Dove: Add RTC interrupt via PMU interrupt controller. ARM: Dove: Add DT node for PMU interrupt controller. ARM: mvebu: Add DT entry for ReadyNAS Duo v2 to use gpio-poweroff driver ARM: mvebu: Add RN104 SATA LEDs driven via NXP PCA9554 I2C to GPIO muxer ARM: kirkwood: mark guruplug sdio as non-removable ARM: kirkwood: provide pinctrl default to sdio nodes ARM: dove: Fix typo in device_type property of phy node ARM: orion5x: Fix typo in device_type property of phy node ARM: mvebu: Enable NAND controller in Armada 370 Mirabox ARM: mvebu: Enable NAND controller in Armada XP GP board ARM: mvebu: Add support for NAND controller in Armada 370/XP ARM: kirkwood: Cleanup comments in Sheevaplug dts files ARM: mvebu: dts: remove unneeded linux,default-state from led nodes Signed-off-by: -
git://git.infradead.org/linux-mvebuOlof Johansson authored
From Jason Cooper: mvebu soc changes for v3.14 - orion: - remove IRQF_DISABLED - directly include some .h files - mvebu: - remove some sparse warnings - orion5x: - include cleanup - warning removal for C=1 - kirkwood: - remove legacy clock workarounds - stop rpinting a TCLK value of 0 for DT boards - dove: - warning removal for C=1 * tag 'mvebu-soc-3.14' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix some sparse warnings ARM: kirkwood: stop printk TCLK value at boot for DT boards ARM: orion5x: drop unused include from common.c ARM: Dove: Fix compiler warnings with C=1 builds ARM: Orion5x: Fix warnings when using C=1. ARM: Orion: Add missing includes ARM: kirkwood: remove lagacy clk workarounds arm: plat-orion: remove deprecated IRQF_DISABLED Signed-off-by: -
Olof Johansson authored
Merge tag 'renesas-cleanup-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup From Simon Horman: Renesas ARM based SoC cleanups for v3.14 * Tidy up clock table order for r7s72100, r8a7779, r8a7779, r8a7790, sh7372 and sh73a0 SoCs. * Tidy up camera-rcar header for r8a7779 SoC * Tidy up registration of VIN on r8a7779 SoC * Tidy up PFC registration on r8a7790 SoC * Correct typo in clocks for r8a7790 SoC * Don't use named resources for IPMMU, I2C and TMU on sh73a0 SoC * Don't use named resources for MMCIF and SDHI on ape6evm board * Don't use named resources for MMCIF on lager board * Tidy up device registration on lager board * Tidy up headers for bockw board * tag 'renesas-cleanup-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh7372: tidyup clock table order ARM: shmobile: r7s72100: tidyup clock table order ARM: shmobile: sh73a0: tidyup clock table order ARM: shmobile: r8a7779: cleanup registration of sh_eth ARM: shmobile: r8a7790: Correct typo in clocks ARM: shmobile: r8a7779: camera-rcar header cleanup ARM: shmobile: Add r8a7790_register_pfc() function ARM: shmobile: Cosmetic update of Lager DT Reference ARM: shmobile: r8a7779: cleanup registration of VIN ARM: shmobile: bockw: header cleanup ARM: shmobile: sh73a0: don't use named resource for IPMMU ARM: shmobile: sh73a0: don't use named resource for I2C ARM: shmobile: sh73a0: don't use named resource for TMU ARM: shmobile: lager: don't use named resource for MMCIF ARM: shmobile: ape6evm: don't use named resource for SDHI ARM: shmobile: ape6evm: don't use named resource for MMCIF Signed-off-by:
-
Olof Johansson authored
Merge tag 'ux500-devicetree-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From Linus Walleij: Ux500 device tree patches for v3.14, take one: - Fix up tc3589x bindings so this chip works again. - Remove SSP platform devices, as we now boot from device tree exclusively. - Delete surplus AB8500/DB8500 platform data, not obtained from the device tree. - Add DMA config for the MSP devices. - A series of 21 patches moving pin control config for the on-chip Nomadik pin controller from the board file to the device tree, step by step. - Two patches to the STE DMA40 driver regarding the high-prio DMA channel so this can be moved to the device tree. Both have Vinod's ACK. - Decommission of the non-device tree boot path for the timer initialization code. - Deletion of the non-devicetree probe path from the MTU timer driver, as all platforms using it are now using device tree. This has Daniel Lezcano's ACK. * tag 'ux500-devicetree-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (39 commits) ARM: ux500: decomission custom SMP TWD timer init clksrc: delete nomadik MTU non-DT boot path ARM: ux500: decomission the non-DT MTU init sequence dma: ste_dma40: Parse flags property for new 'high priority channel' request dma: ste_dma40: Expand DT binding to accept 'high-priority channel' flag ARM: ux500: Remove checking for DT during timer init ARM: ux500: Clean-up legacy extern prototype ARM: ux500: Remove unused call to register AMBA devices ARM: ux500: Clean-up non-DT IRQ initialisation pinctrl: nomadik: decomission non-DT boot path pinctrl: nomadik: move platform data handling into driver ARM: ux500: get rid of unused header ARM: ux500: delete Nomadik pinctrl AUXDATA ARM: ux500: delete remnant pin config macros ARM: ux500: move snowball pin configs to device tree ARM: ux500: move snowball LED pin control to device tree ARM: ux500: convert Snowball SPI pin reference ARM: ux500: move snowball ethernet config to device tree ARM: ux500: move HREFv60plus pin configs to device tree ARM: ux500: move final HREFv60 LCD pins to device tree ... Signed-off-by:
-
- 03 Dec, 2013 4 commits
-
-
Dinh Nguyen authored
Some of the clocks that were designated gate-clk do not have a gate, so change those clocks to be of periph-clk type. Signed-off-by:
Dinh Nguyen <dinguyen@altera.com> Signed-off-by:
-
Dinh Nguyen authored
Update Kconfig to enable TWD. Signed-off-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
-
Olof Johansson authored
Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: -
Olof Johansson authored
This enables a few more options on the sunxi defconfigs such that I can use nfsroot to boot them (there is no local storage support yet). It also enables PRINTK_TIME and tmpfs since it's a common distro requirement. Signed-off-by:
-
