- 10 Nov, 2016 40 commits
-
-
Aditya Shankar authored
commit 1d4f1d53 upstream. Commit 2518ac59 ("staging: wilc1000: Replace kthread with workqueue for host interface") adds an unconditional destroy_workqueue() on the wilc's "hif_workqueue" soon after its creation thereby rendering it unusable. It then further attempts to queue work onto this non-existing hif_worqueue and results in: Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = de478000 [00000010] *pgd=3eec0831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM Modules linked in: wilc1000_sdio(C) wilc1000(C) CPU: 0 PID: 825 Comm: ifconfig Tainted: G C 4.8.0-rc8+ #37 Hardware name: Atmel SAMA5 task: df56f800 task.stack: deeb0000 PC is at __queue_work+0x90/0x284 LR is at __queue_work+0x58/0x284 pc : [<c0126bb0>] lr : [<c0126b78>] psr: 600f0093 sp : deeb1aa0 ip : def22d78 fp : deea6000 r10: 00000000 r9 : c0a08150 r8 : c0a2f058 r7 : 00000001 r6 : dee9b600 r5 : def22d74 r4 : 00000000 r3 : 00000000 r2 : def22d74 r1 : 07ffffff r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none ... [<c0127060>] (__queue_work) from [<c0127298>] (queue_work_on+0x34/0x40) [<c0127298>] (queue_work_on) from [<bf0076b4>] (wilc_enqueue_cmd+0x54/0x64 [wilc1000]) [<bf0076b4>] (wilc_enqueue_cmd [wilc1000]) from [<bf0082b4>] (wilc_set_wfi_drv_handler+0x48/0x70 [wilc1000]) [<bf0082b4>] (wilc_set_wfi_drv_handler [wilc1000]) from [<bf00509c>] (wilc_mac_open+0x214/0x250 [wilc1000]) [<bf00509c>] (wilc_mac_open [wilc1000]) from [<c04fde98>] (__dev_open+0xb8/0x11c) [<c04fde98>] (__dev_open) from [<c04fe128>] (__dev_change_flags+0x94/0x158) [<c04fe128>] (__dev_change_flags) from [<c04fe204>] (dev_change_flags+0x18/0x48) [<c04fe204>] (dev_change_flags) from [<c0557d5c>] (devinet_ioctl+0x6b4/0x788) [<c0557d5c>] (devinet_ioctl) from [<c04e40a0>] (sock_ioctl+0x154/0x2cc) [<c04e40a0>] (sock_ioctl) from [<c01b16e0>] (do_vfs_ioctl+0x9c/0x878) [<c01b16e0>] (do_vfs_ioctl) from [<c01b1ef0>] (SyS_ioctl+0x34/0x5c) [<c01b1ef0>] (SyS_ioctl) from [<c0107520>] (ret_fast_syscall+0x0/0x3c) Code: e5932004 e1520006 01a04003 0affffff (e5943010) ---[ end trace b612328adaa6bf20 ]--- This fix removes the unnecessary call to destroy_workqueue() while opening the device to avoid the above kernel panic. The deinit routine already does a good job of terminating the workqueue when no longer needed. Reported-by:
Nicolas Ferre <Nicolas.Ferre@microchip.com> Fixes: 2518ac59 ("staging: wilc1000: Replace kthread with workqueue for host interface") Signed-off-by:
Aditya Shankar <Aditya.Shankar@microchip.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sandhya Bankar authored
commit d1fe85ec upstream. This will result in a random value being reported on big endian architectures. (thanks to Lars-Peter Clausen for pointing out the effects of this bug) Only effects a value printed to the log, but as this reports the settings of the probe in question it may be of direct interest to users. Also, fixes the following sparse endianness warnings: drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 drivers/iio/chemical/atlas-ph-sensor.c:215:9: warning: cast to restricted __be16 Signed-off-by:
Sandhya Bankar <bankarsandhya512@gmail.com> Fixes: e8dd92bf ("iio: chemical: atlas-ph-sensor: add EC feature") Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Marcin Wojtas authored
commit 51227bf5 upstream. I2C and SPI interfaces share common clock trees within the CP110 HW block. It occurred that SPI0 interface has wrong clock assignment in the device tree, which is fixed in this commit to a proper value. Fixes: 728dacc7 ("arm64: dts: marvell: initial DT description of ...") Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Dmitry Vyukov authored
commit 32b2921e upstream. Size of kmalloc() in vc_do_resize() is controlled by user. Too large kmalloc() size triggers WARNING message on console. Put a reasonable upper bound on terminal size to prevent WARNINGs. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> CC: David Rientjes <rientjes@google.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: linux-kernel@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by:
-
Mathias Nyman authored
commit 346e9973 upstream. If a device is unplugged and replugged during Sx system suspend some Intel xHC hosts will overwrite the CAS (Cold attach status) flag and no device connection is noticed in resume. A device in this state can be identified in resume if its link state is in polling or compliance mode, and the current connect status is 0. A device in this state needs to be warm reset. Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Observed on Cherryview and Apollolake as they go into compliance mode if LFPS times out during polling, and re-plugged devices are not discovered at resume. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 4c39135a upstream. xHC in Wildcatpoint-LP PCH is similar to LynxPoint-LP and need the same quirks to prevent machines from spurious restart while shutting them down. Reported-by:
Hasan Mahmood <hasan.mahm@gmail.com> Signed-off-by:
-
Long Li authored
commit 407a3aee upstream. The host keeps sending heartbeat packets independent of the guest responding to them. Even though we respond to the heartbeat messages at interrupt level, we can have situations where there maybe multiple heartbeat messages pending that have not been responded to. For instance this occurs when the VM is paused and the host continues to send the heartbeat messages. Address this issue by draining and responding to all the heartbeat messages that maybe pending. Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Scot Doyle authored
commit 009e39ae upstream. When resizing a vt its selection may exceed the new size, resulting in an invalid memory access [1]. Clear the selection before resizing. [1] http://lkml.kernel.org/r/CACT4Y+acDTwy4umEvf5ROBGiRJNrxHN4Cn5szCXE5Jw-d1B=Xw@mail.gmail.comReported-and-tested-by:
Scot Doyle <lkml14@scotdoyle.com> Signed-off-by:
-
Thomas Gleixner authored
commit 1e90a13d upstream. The recent changes, which forced the registration of the boot cpu on UP systems, which do not have ACPI tables, have been fixed for systems w/o local APIC, but left a wreckage for systems which have neither ACPI nor mptables, but the CPU has an APIC, e.g. virtualbox. The boot process crashes in prefill_possible_map() as it wants to register the boot cpu, which needs to access the local apic, but the local APIC is not yet mapped. There is no reason why init_apic_mapping() can't be invoked before prefill_possible_map(). So instead of playing another silly early mapping game, as the ACPI/mptables code does, we just move init_apic_mapping() before the call to prefill_possible_map(). In hindsight, I should have noticed that combination earlier. Sorry for the churn (also in stable)! Fixes: ff856051 ("x86/boot/smp: Don't try to poke disabled/non-existent APIC") Reported-and-debugged-by:
Michal Necasek <michal.necasek@oracle.com> Reported-and-tested-by:
Wolfgang Bauer <wbauer@tmo.at> Cc: prarit@redhat.com Cc: ville.syrjala@linux.intel.com Cc: michael.thayer@oracle.com Cc: knut.osmundsen@oracle.com Cc: frank.mehnert@oracle.com Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1610282114380.5053@nanosSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Gerald Schaefer authored
commit a7a7aeef upstream. When interrupting an application which was allocating DMAable memory, it was possible, that the DMA memory was deallocated twice, leading to the error symptoms below. Thanks to Gerald, who analyzed the problem and provided this patch. I agree with his analysis of the problem: ddcb_cmd_fixups() -> genwqe_alloc_sync_sgl() (fails in f/lpage, but sgl->sgl != NULL and f/lpage maybe also != NULL) -> ddcb_cmd_cleanup() -> genwqe_free_sync_sgl() (double free, because sgl->sgl != NULL and f/lpage maybe also != NULL) In this scenario we would have exactly the kind of double free that would explain the WARNING / Bad page state, and as expected it is caused by broken error handling (cleanup). Using the Ubuntu git source, tag Ubuntu-4.4.0-33.52, he was able to reproduce the "Bad page state" issue, and with the patch on top he could not reproduce it any more. ------------[ cut here ]------------ WARNING: at /build/linux-o03cxz/linux-4.4.0/arch/s390/include/asm/pci_dma.h:141 Modules linked in: qeth_l2 ghash_s390 prng aes_s390 des_s390 des_generic sha512_s390 sha256_s390 sha1_s390 sha_common genwqe_card qeth crc_itu_t qdio ccwgroup vmur dm_multipath dasd_eckd_mod dasd_mod CPU: 2 PID: 3293 Comm: genwqe_gunzip Not tainted 4.4.0-33-generic #52-Ubuntu task: 0000000032c7e270 ti: 00000000324e4000 task.ti: 00000000324e4000 Krnl PSW : 0404c00180000000 0000000000156346 (dma_update_cpu_trans+0x9e/0xa8) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 00000000324e7bcd 0000000000c3c34a 0000000027628298 000000003215b400 0000000000000400 0000000000001fff 0000000000000400 0000000116853000 07000000324e7b1e 0000000000000001 0000000000000001 0000000000000001 0000000000001000 0000000116854000 0000000000156402 00000000324e7a38 Krnl Code: 000000000015633a: 95001000 cli 0(%r1),0 000000000015633e: a774ffc3 brc 7,1562c4 #0000000000156342: a7f40001 brc 15,156344 >0000000000156346: 92011000 mvi 0(%r1),1 000000000015634a: a7f4ffbd brc 15,1562c4 000000000015634e: 0707 bcr 0,%r7 0000000000156350: c00400000000 brcl 0,156350 0000000000156356: eb7ff0500024 stmg %r7,%r15,80(%r15) Call Trace: ([<00000000001563e0>] dma_update_trans+0x90/0x228) [<00000000001565dc>] s390_dma_unmap_pages+0x64/0x160 [<00000000001567c2>] s390_dma_free+0x62/0x98 [<000003ff801310ce>] __genwqe_free_consistent+0x56/0x70 [genwqe_card] [<000003ff801316d0>] genwqe_free_sync_sgl+0xf8/0x160 [genwqe_card] [<000003ff8012bd6e>] ddcb_cmd_cleanup+0x86/0xa8 [genwqe_card] [<000003ff8012c1c0>] do_execute_ddcb+0x110/0x348 [genwqe_card] [<000003ff8012c914>] genwqe_ioctl+0x51c/0xc20 [genwqe_card] [<000000000032513a>] do_vfs_ioctl+0x3b2/0x518 [<0000000000325344>] SyS_ioctl+0xa4/0xb8 [<00000000007b86c6>] system_call+0xd6/0x264 [<000003ff9e8e520a>] 0x3ff9e8e520a Last Breaking-Event-Address: [<0000000000156342>] dma_update_cpu_trans+0x9a/0xa8 ---[ end trace 35996336235145c8 ]--- BUG: Bad page state in process jbd2/dasdb1-8 pfn:3215b page:000003d100c856c0 count:-1 mapcount:0 mapping: (null) index:0x0 flags: 0x3fffc0000000000() page dumped because: nonzero _count Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Frank Haverkamp <haver@linux.vnet.ibm.com> Signed-off-by:
-
Bryan Paluch authored
commit ed6d6f8f upstream. Increase ohci watchout delay to 275 ms. Previous delay was 250 ms with 20 ms of slack, after removing slack time some ohci controllers don't respond in time. Logs from systems with controllers that have the issue would show "HcDoneHead not written back; disabled" Signed-off-by:
Bryan Paluch <bryanpaluch@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Yoshihiro Shimoda authored
commit b7603239 upstream. Since the controller on R-Car Gen3 doesn't have any status registers to detect initialization (LPSTS.SUSPM = 1) and the initialization needs up to 45 usec, this patch adds wait after the initialization. Otherwise, writing other registers (e.g. INTENB0) will fail. Fixes: de18757e ("usb: renesas_usbhs: add R-Car Gen3 power control") Cc: <balbi@kernel.org> Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Mathias Nyman authored
commit 7d3b016a upstream. USB2 host inititated resume, and system suspend bus resume need to use the same USB_RESUME_TIMEOUT as elsewhere. This resolves a device disconnect issue at system resume seen on Intel Braswell and Apollolake, but is in no way limited to those platforms. Signed-off-by:
-
Stefan Tauner authored
commit ca006f78 upstream. This adds support to ftdi_sio for the Infineon TriBoard TC2X7 engineering board for first-generation Aurix SoCs with Tricore CPUs. Mere addition of the device IDs does the job. Signed-off-by:
Stefan Tauner <stefan.tauner@technikum-wien.at> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit de24e0a1 upstream. The current tiocmget implementation would fail to report errors up the stack and instead leaked a few bits from the stack as a mask of modem-status flags. Fixes: 39a66b8d ("[PATCH] USB: CP2101 Add support for flow control") Signed-off-by:
-
Johan Hovold authored
commit 126d26f6 upstream. Make sure we have at least one port before attempting to register a console. Currently, at least one driver binds to a "dummy" interface and requests zero ports for it. Should such an interface also lack endpoints, we get a NULL-deref during probe. Fixes: e5b1e206 ("USB: serial: make minor allocation dynamic") Signed-off-by:
-
Felipe Balbi authored
commit 6c83f772 upstream. If we don't guarantee that we will always get an interrupt at least when we're queueing our very last request, we could fall into situation where we queue every request with 'no_interrupt' set. This will cause the link to get stuck. The behavior above has been triggered with g_ether and dwc3. Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Alexandre Belloni authored
commit bbe097f0 upstream. Since commit c32b5bcf ("ARM: dts: at91: Fix USB endpoint nodes"), atmel_usba_udc fails with: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at include/linux/usb/gadget.h:405 ecm_do_notify+0x188/0x1a0 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.7.0+ #15 Hardware name: Atmel SAMA5 [<c010ccfc>] (unwind_backtrace) from [<c010a7ec>] (show_stack+0x10/0x14) [<c010a7ec>] (show_stack) from [<c0115c10>] (__warn+0xe4/0xfc) [<c0115c10>] (__warn) from [<c0115cd8>] (warn_slowpath_null+0x20/0x28) [<c0115cd8>] (warn_slowpath_null) from [<c04377ac>] (ecm_do_notify+0x188/0x1a0) [<c04377ac>] (ecm_do_notify) from [<c04379a4>] (ecm_set_alt+0x74/0x1ac) [<c04379a4>] (ecm_set_alt) from [<c042f74c>] (composite_setup+0xfc0/0x19f8) [<c042f74c>] (composite_setup) from [<c04356e8>] (usba_udc_irq+0x8f4/0xd9c) [<c04356e8>] (usba_udc_irq) from [<c013ec9c>] (handle_irq_event_percpu+0x9c/0x158) [<c013ec9c>] (handle_irq_event_percpu) from [<c013ed80>] (handle_irq_event+0x28/0x3c) [<c013ed80>] (handle_irq_event) from [<c01416d4>] (handle_fasteoi_irq+0xa0/0x168) [<c01416d4>] (handle_fasteoi_irq) from [<c013e3f8>] (generic_handle_irq+0x24/0x34) [<c013e3f8>] (generic_handle_irq) from [<c013e640>] (__handle_domain_irq+0x54/0xa8) [<c013e640>] (__handle_domain_irq) from [<c010b214>] (__irq_svc+0x54/0x70) [<c010b214>] (__irq_svc) from [<c0107eb0>] (arch_cpu_idle+0x38/0x3c) [<c0107eb0>] (arch_cpu_idle) from [<c0137300>] (cpu_startup_entry+0x9c/0xdc) [<c0137300>] (cpu_startup_entry) from [<c0900c40>] (start_kernel+0x354/0x360) [<c0900c40>] (start_kernel) from [<20008078>] (0x20008078) ---[ end trace e7cf9dcebf4815a6 ]--- Fixes: c32b5bcf ("ARM: dts: at91: Fix USB endpoint nodes") Reported-by:
Richard Genoud <richard.genoud@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Alexander Usyskin authored
commit 43605e29 upstream. SEC registers are not accessible when the TXE device is in low power state, hence the SEC interrupt cannot be processed if device is not awake. In some rare cases entrance to low power state (aliveness off) and input ready bits can be signaled at the same time, resulting in communication stall as input ready won't be signaled again after waking up. To resolve this IPC_HHIER_SEC bit in HHISR_REG should not be cleaned if the interrupt is not processed. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Richard Weinberger authored
commit a00052a2 upstream. Commit c83ed4c9 ("ubifs: Abort readdir upon error") broke overlayfs support because the fix exposed an internal error code to VFS. Reported-by:
Peter Rosin <peda@axentia.se> Tested-by:
Ralph Sennhauser <ralph.sennhauser@gmail.com> Tested-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
commit c83ed4c9 upstream. If UBIFS is facing an error while walking a directory, it reports this error and ubifs_readdir() returns the error code. But the VFS readdir logic does not make the getdents system call fail in all cases. When the readdir cursor indicates that more entries are present, the system call will just return and the libc wrapper will try again since it also knows that more entries are present. This causes the libc wrapper to busy loop for ever when a directory is corrupted on UBIFS. A common approach do deal with corrupted directory entries is skipping them by setting the cursor to the next entry. On UBIFS this approach is not possible since we cannot compute the next directory entry cursor position without reading the current entry. So all we can do is setting the cursor to the "no more entries" position and make getdents exit. Signed-off-by:
-
Thomas Gleixner authored
commit 4da9152a upstream. Linus stumbled over the unlocked modification of the timer expiry value in mod_timer() which is an optimization for timers which stay in the same bucket - due to the bucket granularity - despite their expiry time getting updated. The optimization itself still makes sense even if we take the lock, because in case that the bucket stays the same, we avoid the pointless queue/enqueue dance. Make the check and the modification of timer->expires protected by the base lock and shuffle the remaining code around so we can keep the lock held when we actually have to requeue the timer to a different bucket. Fixes: f00c0afd ("timers: Implement optimization for same expiry time in mod_timer()") Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Thomas Gleixner authored
commit b831275a upstream. Linus noticed that lock_timer_base() lacks a READ_ONCE() for accessing the timer flags. As a consequence the compiler is allowed to reload the flags between the initial check for TIMER_MIGRATION and the following timer base computation and the spin lock of the base. While this has not been observed (yet), we need to make sure that it never happens. Fixes: 0eeda71b ("timer: Replace timer base by a cpu index") Reported-by:
-
Thomas Gleixner authored
commit 6bad6bcc upstream. When a timer is enqueued we try to forward the timer base clock. This mechanism has two issues: 1) Forwarding a remote base unlocked The forwarding function is called from get_target_base() with the current timer base lock held. But if the new target base is a different base than the current base (can happen with NOHZ, sigh!) then the forwarding is done on an unlocked base. This can lead to corruption of base->clk. Solution is simple: Invoke the forwarding after the target base is locked. 2) Possible corruption due to jiffies advancing This is similar to the issue in get_net_timer_interrupt() which was fixed in the previous patch. jiffies can advance between check and assignement and therefore advancing base->clk beyond the next expiry value. So we need to read jiffies into a local variable once and do the checks and assignment with the local copy. Fixes: a683f390("timers: Forward the wheel clock whenever possible") Reported-by:
Ashton Holmes <scoopta@gmail.com> Reported-by:
Michael Thayer <michael.thayer@oracle.com> Signed-off-by:
-
Thomas Gleixner authored
commit 041ad7bc upstream. Ashton and Michael reported, that kernel versions 4.8 and later suffer from USB timeouts which are caused by the timer wheel rework. This is caused by a bug in the base clock forwarding mechanism, which leads to timers expiring early. The scenario which leads to this is: run_timers() while (jiffies >= base->clk) { collect_expired_timers(); base->clk++; expire_timers(); } So base->clk = jiffies + 1. Now the cpu goes idle: idle() get_next_timer_interrupt() nextevt = __next_time_interrupt(); if (time_after(nextevt, base->clk)) base->clk = jiffies; jiffies has not advanced since run_timers(), so this assignment effectively decrements base->clk by one. base->clk is the index into the timer wheel arrays. So let's assume the following state after the base->clk increment in run_timers(): jiffies = 0 base->clk = 1 A timer gets enqueued with an expiry delta of 63 ticks (which is the case with the USB timeout and HZ=250) so the resulting bucket index is: base->clk + delta = 1 + 63 = 64 The timer goes into the first wheel level. The array size is 64 so it ends up in bucket 0, which is correct as it takes 63 ticks to advance base->clk to index into bucket 0 again. If the cpu goes idle before jiffies advance, then the bug in the forwarding mechanism sets base->clk back to 0, so the next invocation of run_timers() at the next tick will index into bucket 0 and therefore expire the timer 62 ticks too early. Instead of blindly setting base->clk to jiffies we must make the forwarding conditional on jiffies > base->clk, but we cannot use jiffies for this as we might run into the following issue: if (time_after(jiffies, base->clk) { if (time_after(nextevt, base->clk)) base->clk = jiffies; jiffies can increment between the check and the assigment far enough to advance beyond nextevt. So we need to use a stable value for checking. get_next_timer_interrupt() has the basej argument which is the jiffies value snapshot taken in the calling code. So we can just that. Thanks to Ashton for bisecting and providing trace data! Fixes: a683f390 ("timers: Forward the wheel clock whenever possible") Reported-by:
-
Borislav Petkov authored
commit 1c27f646 upstream. We needed the physical address of the container in order to compute the offset within the relocated ramdisk. And we did this by doing __pa() on the virtual address. However, __pa() does checks whether the physical address is within PAGE_OFFSET and __START_KERNEL_map - see __phys_addr() - which fail if we have CONFIG_RANDOMIZE_MEMORY enabled: we feed a virtual address which *doesn't* have the randomization offset into a function which uses PAGE_OFFSET which *does* have that offset. This makes this check fire: VIRTUAL_BUG_ON((x > y) || !phys_addr_valid(x)); ^^^^^^ due to the randomization offset. The fix is as simple as using __pa_nodebug() because we do that randomization offset accounting later in that function ourselves. Reported-by:
Bob Peterson <rpeterso@redhat.com> Tested-by:
Borislav Petkov <bp@suse.de> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20161027123623.j2jri5bandimboff@pd.tnicSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Paul Mackerras authored
commit 09b7e37b upstream. This fixes a race condition where one thread that is entering or leaving a power-saving state can inadvertently ignore the lock bit that was set by another thread, and potentially also clear it. The core_idle_lock_held function is called when the lock bit is seen to be set. It polls the lock bit until it is clear, then does a lwarx to load the word containing the lock bit and thread idle bits so it can be updated. However, it is possible that the value loaded with the lwarx has the lock bit set, even though an immediately preceding lwz loaded a value with the lock bit clear. If this happens then we go ahead and update the word despite the lock bit being set, and when called from pnv_enter_arch207_idle_mode, we will subsequently clear the lock bit. No identifiable misbehaviour has been attributed to this race. This fixes it by checking the lock bit in the value loaded by the lwarx. If it is set then we just go back and keep on polling. Fixes: b32aadc1 ("powerpc/powernv: Fix race in updating core_idle_state") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Paul Mackerras authored
commit 56c46222 upstream. Commit 8117ac6a ("powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode", 2014-12-10) fixed a race condition where one thread entering a KVM guest could switch the MMU context to the guest while another thread was still in host kernel context with the MMU on. That commit moved the point where a thread entering a power-saving mode set its kvm_hstate.hwthread_state field in its PACA to KVM_HWTHREAD_IN_IDLE from a point where the MMU was on to after the MMU had been switched off. That commit also added a comment explaining that we have to switch to real mode before setting hwthread_state to avoid this race. Nevertheless, commit 4eae2c9a ("powerpc/powernv: Make pnv_powersave_common more generic", 2016-07-08) subsequently moved the setting of hwthread_state back to a point where the MMU is on, thus reintroducing the race, despite the comment saying that this should not be done being included in full in the context lines of the patch that did it. This fixes the race again and adds a bigger and shoutier comment explaining the potential race condition. Fixes: 4eae2c9a ("powerpc/powernv: Make pnv_powersave_common more generic") Signed-off-by:
Shreyas B. Prabhu <shreyasbp@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit bd77c449 upstream. Before this patch, we used tlbiel, if we ever ran only on this core. That was mostly derived from the nohash usage of the same. But is incorrect, the ISA 3.0 clarifies tlbiel such that: "All TLB entries that have all of the following properties are made invalid on the thread executing the tlbiel instruction" ie. tlbiel only invalidates TLB entries on the current thread. So if the mm has been used on any other thread (aka. cpu) then we must broadcast the invalidate. This bug could lead to invalid TLB entries if a program runs on multiple threads of a core. Hence use tlbiel, if we only ever ran on only the current cpu. Fixes: 1a472c9d ("powerpc/mm/radix: Add tlbflush routines") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Segher Boessenkool authored
commit 80f23935 upstream. PowerPC's "cmp" instruction has four operands. Normally people write "cmpw" or "cmpd" for the second cmp operand 0 or 1. But, frequently people forget, and write "cmp" with just three operands. With older binutils this is silently accepted as if this was "cmpw", while often "cmpd" is wanted. With newer binutils GAS will complain about this for 64-bit code. For 32-bit code it still silently assumes "cmpw" is what is meant. In this instance the code comes directly from ISA v2.07, including the cmp, but cmpd is correct. Backport to stable so that new toolchains can build old kernels. Fixes: 948cf67c ("powerpc: Add NAP mode support on Power7 in HV mode") Reviewed-by:
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by:
-
Chris Mason authored
commit 570dd450 upstream. btrfs_remove_all_log_ctxs takes a shortcut where it avoids walking the list because it knows all of the waiters are patiently waiting for the commit to finish. But, there's a small race where btrfs_sync_log can remove itself from the list if it finds a log commit is already done. Also, it uses list_del_init() to remove itself from the list, but there's no way to know if btrfs_remove_all_log_ctxs has already run, so we don't know for sure if it is safe to call list_del_init(). This gets rid of all the shortcuts for btrfs_remove_all_log_ctxs(), and just calls it with the proper locking. This is part two of the corruption fixed by cbd60aa7. I should have done this in the first place, but convinced myself the optimizations were safe. A 12 hour run of dbench 2048 will eventually trigger a list debug WARN_ON for the list_del_init() in btrfs_sync_log(). Fixes: d1433debReported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Vaibhav Jain authored
commit a05b82d5 upstream. In some error paths in functions cxl_start_context and afu_ioctl_start_work pid references to the current & group-leader tasks can leak after they are taken. This patch fixes these error paths to release these pid references before exiting the error path. Fixes: 7b8ad495 ("cxl: Fix DSI misses when the context owning task exits") Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reported-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Acked-by:
-
Arve Hjønnevåg authored
commit 4afb604e upstream. Prevents leaking pointers between processes Signed-off-by:
Arve Hjønnevåg <arve@android.com> Signed-off-by:
Martijn Coenen <maco@android.com> Signed-off-by:
-
Arve Hjønnevåg authored
commit 0a3ffab9 upstream. Prevent using a binder_ref with only weak references where a strong reference is required. Signed-off-by:
-
Hui Wang authored
commit 6aecd871 upstream. They uses the codec ALC255, and have the different pin cfg definition from the ones in the existing pin quirk table. Now adding them into the table to fix the problem. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 1a3f0991 upstream. ASRock B150M Pro4/D3 mobo with ALC892 codec doesn't seem to provide proper pins for the surround outputs, hence we need to specify the pincfgs manually with a couple of other corrections. Reported-and-tested-by:
Benjamin Valentin <benpicco@googlemail.com> Signed-off-by:
-
Hui Wang authored
commit f771d5bb upstream. We have a new Dell laptop model which uses ALC295, the pin definition is different from the existing ones in the pin quirk table, to fix the headset mic detection and mic mute led's problem, we need to add the new pin defintion into the pin quirk table. Signed-off-by:
-
Ard Biesheuvel authored
commit 3ab7511e upstream. Commit 49d9e77e ("ALSA: hda - Fix system panic when DMA > 40 bits for Nvidia audio controllers") simply disabled any DMA exceeding 32 bits for NVidia devices, even though they are capable of performing DMA up to 40 bits. On some architectures (such as arm64), system memory is not guaranteed to be 32-bit addressable by PCI devices, and so this change prevents NVidia devices from working on platforms such as AMD Seattle. Since the original commit already mentioned that up to 40 bits of DMA is supported, and given that the code has been updated in the meantime to support a 40 bit DMA mask on other devices, revert commit 49d9e77e and explicitly set the DMA mask to 40 bits for NVidia devices. Fixes: 49d9e77e ('ALSA: hda - Fix system panic when DMA > 40 bits...') Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Takashi Iwai authored
commit 9b50898a upstream. The recent rewrite of the sequencer time accounting using timespec64 in the commit [3915bf29: ALSA: seq_timer: use monotonic times internally] introduced a bad regression. Namely, the time reported back doesn't increase but goes back and forth. The culprit was obvious: the delta is stored to the result (cur_time = delta), instead of adding the delta (cur_time += delta)! Let's fix it. Fixes: 3915bf29 ('ALSA: seq_timer: use monotonic times internally') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177571Reported-by:
Yves Guillemot <yc.guillemot@wanadoo.fr> Signed-off-by:
-
Marcel Hasler authored
commit bdc3478f upstream. The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves the issue reported on the mailing list (http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071). Signed-off-by:
Marcel Hasler <mahasler@gmail.com> Signed-off-by:
-
