- 28 Sep, 2018 6 commits
-
-
David Howells authored
It seems that enabling IPV6_RECVERR on an IPv6 socket doesn't also turn on IP_RECVERR, so neither local errors nor ICMP-transported remote errors from IPv4 peer addresses are returned to the AF_RXRPC protocol. Make the sockopt setting code in rxrpc_open_socket() fall through from the AF_INET6 case to the AF_INET case to turn on all the AF_INET options too in the AF_INET6 case. Fixes: f2aeed3a ("rxrpc: Fix error reception on AF_INET6 sockets") Signed-off-by:
David Howells <dhowells@redhat.com>
-
David Howells authored
Make the following changes to improve the robustness of the code that sets up a new service call: (1) Cache the rxrpc_sock struct obtained in rxrpc_data_ready() to do a service ID check and pass that along to rxrpc_new_incoming_call(). This means that I can remove the check from rxrpc_new_incoming_call() without the need to worry about the socket attached to the local endpoint getting replaced - which would invalidate the check. (2) Cache the rxrpc_peer struct, thereby allowing the peer search to be done once. The peer is passed to rxrpc_new_incoming_call(), thereby saving the need to repeat the search. This also reduces the possibility of rxrpc_publish_service_conn() BUG()'ing due to the detection of a duplicate connection, despite the initial search done by rxrpc_find_connection_rcu() having turned up nothing. This BUG() shouldn't ever get hit since rxrpc_data_ready() *should* be non-reentrant and the result of the initial search should still hold true, but it has proven possible to hit. I *think* this may be due to __rxrpc_lookup_peer_rcu() cutting short the iteration over the hash table if it finds a matching peer with a zero usage count, but I don't know for sure since it's only ever been hit once that I know of. Another possibility is that a bug in rxrpc_data_ready() that checked the wrong byte in the header for the RXRPC_CLIENT_INITIATED flag might've let through a packet that caused a spurious and invalid call to be set up. That is addressed in another patch. (3) Fix __rxrpc_lookup_peer_rcu() to skip peer records that have a zero usage count rather than stopping and returning not found, just in case there's another peer record behind it in the bucket. (4) Don't search the peer records in rxrpc_alloc_incoming_call(), but rather either use the peer cached in (2) or, if one wasn't found, preemptively install a new one. Fixes: 8496af50 ("rxrpc: Use RCU to access a peer's service connection tree") Signed-off-by: -
David Howells authored
Do more up-front checking on incoming packets to weed out invalid ones and also ones aimed at services that we don't support. Whilst we're at it, replace the clearing of call and skew if we don't find a connection with just initialising the variables to zero at the top of the function. Signed-off-by: -
David Howells authored
In the input path, a received sk_buff can be marked for rejection by setting RXRPC_SKB_MARK_* in skb->mark and, if needed, some auxiliary data (such as an abort code) in skb->priority. The rejection is handled by queueing the sk_buff up for dealing with in process context. The output code reads the mark and priority and, theoretically, generates an appropriate response packet. However, if RXRPC_SKB_MARK_BUSY is set, this isn't noticed and an ABORT message with a random abort code is generated (since skb->priority wasn't set to anything). Fix this by outputting the appropriate sort of packet. Also, whilst we're at it, most of the marks are no longer used, so remove them and rename the remaining two to something more obvious. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
David Howells authored
Fix RTT information gathering in AF_RXRPC by the following means: (1) Enable Rx timestamping on the transport socket with SO_TIMESTAMPNS. (2) If the sk_buff doesn't have a timestamp set when rxrpc_data_ready() collects it, set it at that point. (3) Allow ACKs to be requested on the last packet of a client call, but not a service call. We need to be careful lest we undo: bf7d620a Author: David Howells <dhowells@redhat.com> Date: Thu Oct 6 08:11:51 2016 +0100 rxrpc: Don't request an ACK on the last DATA packet of a call's Tx phase but that only really applies to service calls that we're handling, since the client side gets to send the final ACK (or not). (4) When about to transmit an ACK or DATA packet, record the Tx timestamp before only; don't update the timestamp afterwards. (5) Switch the ordering between recording the serial and recording the timestamp to always set the serial number first. The serial number shouldn't be seen referenced by an ACK packet until we've transmitted the packet bearing it - so in the Rx path, we don't need the timestamp until we've checked the serial number. Fixes: cf1a6474 ("rxrpc: Add per-peer RTT tracker") Signed-off-by: -
David Howells authored
There's a check in rxrpc_data_ready() that's checking the CLIENT_INITIATED flag in the packet type field rather than in the packet flags field. Fix this by creating a pair of helper functions to check whether the packet is going to the client or to the server and use them generally. Fixes: 248f219c ("rxrpc: Rewrite the data and ack handling code") Signed-off-by:
-
- 27 Sep, 2018 20 commits
-
-
David Howells authored
rxrpc_find_connection_rcu() initialises variable k twice with the same information. Remove one of the initialisations. Signed-off-by: -
Maciej Żenczykowski authored
(fix documentation and sysctl access to treat it as such) Tested: # zcat /proc/config.gz | egrep ^CONFIG_HZ CONFIG_HZ_1000=y CONFIG_HZ=1000 # echo $[(1<<32)/1000 + 1] | tee /proc/sys/net/ipv4/tcp_probe_interval 4294968 tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument # echo $[(1<<32)/1000] | tee /proc/sys/net/ipv4/tcp_probe_interval 4294967 # echo 0 | tee /proc/sys/net/ipv4/tcp_probe_interval # echo -1 | tee /proc/sys/net/ipv4/tcp_probe_interval -1 tee: /proc/sys/net/ipv4/tcp_probe_interval: Invalid argument Signed-off-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The current netpoll implementation in the bnxt_en driver has problems that may miss TX completion events. bnxt_poll_work() in effect is only handling at most 1 TX packet before exiting. In addition, there may be in flight TX completions that ->poll() may miss even after we fix bnxt_poll_work() to handle all visible TX completions. netpoll may not call ->poll() again and HW may not generate IRQ because the driver does not ARM the IRQ when the budget (0 for netpoll) is reached. We fix it by handling all TX completions and to always ARM the IRQ when we exit ->poll() with 0 budget. Also, the logic to ACK the completion ring in case it is almost filled with TX completions need to be adjusted to take care of the 0 budget case, as discussed with Eric Dumazet <edumazet@google.com> Reported-by:
Song Liu <songliubraving@fb.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Hangbin Liu authored
When add vxlan ttl inherit support, I forgot to fill it when dump vlxan info. Fix it now. Fixes: 72f6d71e ("vxlan: add ttl inherit support") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Andrew Lunn authored
A HWMON device is only registered is the SFP module supports the diagnostic page and is complient to SFF8472. Don't unconditionally unregister the hwmon device when the SFP module is remove, otherwise we access data structures which don't exist. Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1713:25: warning: implicit conversion from enumeration type 'enum tcp_ip_version' to different enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion] cm_info->ip_version = TCP_IPV4; ~ ^~~~~~~~ drivers/net/ethernet/qlogic/qed/qed_iwarp.c:1733:25: warning: implicit conversion from enumeration type 'enum tcp_ip_version' to different enumeration type 'enum qed_tcp_ip_version' [-Wenum-conversion] cm_info->ip_version = TCP_IPV6; ~ ^~~~~~~~ 2 warnings generated. Use the appropriate values from the expected type, qed_tcp_ip_version: TCP_IPV4 = QED_TCP_IPV4 = 0 TCP_IPV6 = QED_TCP_IPV6 = 1 Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when a constant is used in a boolean context as it thinks a bitwise operation may have been intended. drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!p_iov->b_pre_fp_hsi && ^ drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: use '&' for a bitwise operation if (!p_iov->b_pre_fp_hsi && ^~ & drivers/net/ethernet/qlogic/qed/qed_vf.c:415:27: note: remove constant to silence this warning if (!p_iov->b_pre_fp_hsi && ~^~ 1 warning generated. This has been here since commit 1fe614d1 ("qed: Relax VF firmware requirements") and I am not entirely sure why since 0 isn't a special case. Just remove the statement causing Clang to warn since it isn't required. Link: https://github.com/ClangBuiltLinux/linux/issues/126Signed-off-by: -
Mahesh Bandewar authored
Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel - ====================================================== WARNING: possible circular locking dependency detected 4.18.0-next-20180823+ #46 Not tainted ------------------------------------------------------ syz-executor4/26841 is trying to acquire lock: 00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652 but task is already holding lock: 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline] bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320 process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}: process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #0 ((wq_completion)bond_dev->name){+.+.}: lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock((work_completion)(&(&nnw->work)->work)); lock(rtnl_mutex); lock((wq_completion)bond_dev->name); *** DEADLOCK *** 1 lock held by syz-executor4/26841: stack backtrace: CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222 check_prev_add kernel/locking/lockdep.c:1862 [inline] check_prevs_add kernel/locking/lockdep.c:1975 [inline] validate_chain kernel/locking/lockdep.c:2416 [inline] __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001 Signed-off-by:Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
Commit b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") changed the behavior of how link-local-multicast packets are processed. The change in the behavior broke some legacy use cases where these packets are expected to arrive on bonding master device also. This patch passes the packet to the stack with the link it arrived on as well as passes to the bonding-master device to preserve the legacy use case. Fixes: b89f04c6 ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") Reported-by:
Michal Soltys <soltys@ziu.info> Signed-off-by:
-
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_roce.c:153:12: warning: implicit conversion from enumeration type 'enum roce_mode' to different enumeration type 'enum roce_flavor' [-Wenum-conversion] flavor = ROCE_V2_IPV6; ~ ^~~~~~~~~~~~ drivers/net/ethernet/qlogic/qed/qed_roce.c:156:12: warning: implicit conversion from enumeration type 'enum roce_mode' to different enumeration type 'enum roce_flavor' [-Wenum-conversion] flavor = MAX_ROCE_MODE; ~ ^~~~~~~~~~~~~ 2 warnings generated. Use the appropriate values from the expected type, roce_flavor: ROCE_V2_IPV6 = RROCE_IPV6 = 2 MAX_ROCE_MODE = MAX_ROCE_FLAVOR = 3 While we're add it, ditch the local variable flavor, we can just return the value directly from the switch statement. Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: -
Nathan Chancellor authored
Clang complains when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_vf.c:686:6: warning: implicit conversion from enumeration type 'enum qed_tunn_mode' to different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion] QED_MODE_L2GENEVE_TUNN, ^~~~~~~~~~~~~~~~~~~~~~ Update mask's parameter to expect qed_tunn_mode, which is what was intended. Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: -
Nathan Chancellor authored
Clang warns when one enumerated type is implicitly converted to another. drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:163:25: warning: implicit conversion from enumeration type 'enum tunnel_clss' to different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion] p_tun->vxlan.tun_cls = type; ~ ^~~~ drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:165:26: warning: implicit conversion from enumeration type 'enum tunnel_clss' to different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion] p_tun->l2_gre.tun_cls = type; ~ ^~~~ drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:167:26: warning: implicit conversion from enumeration type 'enum tunnel_clss' to different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion] p_tun->ip_gre.tun_cls = type; ~ ^~~~ drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:169:29: warning: implicit conversion from enumeration type 'enum tunnel_clss' to different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion] p_tun->l2_geneve.tun_cls = type; ~ ^~~~ drivers/net/ethernet/qlogic/qed/qed_sp_commands.c:171:29: warning: implicit conversion from enumeration type 'enum tunnel_clss' to different enumeration type 'enum qed_tunn_clss' [-Wenum-conversion] p_tun->ip_geneve.tun_cls = type; ~ ^~~~ 5 warnings generated. Avoid this by changing type to an int. Link: https://github.com/ClangBuiltLinux/linux/issues/125Signed-off-by: -
Colin Ian King authored
Trivial fix to spelling mistake in ms_to_errno array of error messages and remove confusing "not" from the error text since the error code refers to an uninitialized error code. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in DP_VERBOSE message Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: fix WoL handling when suspending the PHY phy_suspend doesn't always recognize that WoL is enabled and therefore suspends the PHY when it should not. First idea to address the issue was to reuse checks used in mdio_bus_phy_may_suspend which check whether relevant devices are wakeup-enabled. Florian raised some concerns because drivers may enable wakeup even if WoL isn't enabled (e.g. certain USB network drivers). The new approach focuses on reducing the risk to break existing stuff. We add a flag wol_enabled to struct net_device which is set in ethtool_set_wol(). Then this flag is checked in phy_suspend(). This doesn't cover 100% of the cases yet (e.g. if WoL is enabled w/o explicit configuration), but it covers the most relevant cases with very little risk of regressions. v2: - Fix a typo ==================== Signed-off-by: -
Heiner Kallweit authored
Core of the problem is that phy_suspend() suspends the PHY when it should not because of WoL. phy_suspend() checks for WoL already, but this works only if the PHY driver handles WoL (what is rarely the case). Typically WoL is handled by the MAC driver. This patch uses new member wol_enabled of struct net_device as additional criteria in the check when not to suspend the PHY because of WoL. Last but not least change phy_detach() to call phy_suspend() before attached_dev is set to NULL. phy_suspend() accesses attached_dev when checking whether the MAC driver activated WoL. Fixes: f1e911d5 ("r8169: add basic phylib support") Fixes: e8cfd9d6 ("net: phy: call state machine synchronously in phy_stop") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
-
Heiner Kallweit authored
Add flag wol_enabled to struct net_device indicating whether Wake-on-LAN is enabled. As first user phy_suspend() will use it to decide whether PHY can be suspended or not. Fixes: f1e911d5 ("r8169: add basic phylib support") Fixes: e8cfd9d6 ("net: phy: call state machine synchronously in phy_stop") Signed-off-by:
-
David S. Miller authored
This reverts commit e0511f6c. I commited the wrong version of these changes. Signed-off-by:
-
Heiner Kallweit authored
Actually there's nothing wrong with the two changes marked as "Fixes", they just revealed a problem which has been existing before. After having switched r8169 to phylib it was reported that WoL from shutdown doesn't work any longer (WoL from suspend isn't affected). Reason is that during shutdown phy_disconnect()->phy_detach()-> phy_suspend() is called. A similar issue occurs when the phylib state machine calls phy_suspend() when handling state PHY_HALTED. Core of the problem is that phy_suspend() suspends the PHY when it should not due to WoL. phy_suspend() checks for WoL already, but this works only if the PHY driver handles WoL (what is rarely the case). Typically WoL is handled by the MAC driver. phylib knows about this and handles it in mdio_bus_phy_may_suspend(), but that's used only when suspending the system, not in other cases like shutdown. Therefore factor out the relevant check from mdio_bus_phy_may_suspend() to a new function phy_may_suspend() and use it in phy_suspend(). Last but not least change phy_detach() to call phy_suspend() before attached_dev is set to NULL. phy_suspend() accesses attached_dev when checking whether the MAC driver activated WoL. Fixes: f1e911d5 ("r8169: add basic phylib support") Fixes: e8cfd9d6 ("net: phy: call state machine synchronously in phy_stop") Signed-off-by:
-
David Ahern authored
The change to move metrics from the dst to rt6_info moved the call to ip6_convert_metrics from ip6_route_add to ip6_route_info_create. In doing so it makes the call in ip6_route_info_append redundant and actually leaks the metrics installed as part of the ip6_route_info_create. Remove the now unnecessary call. Fixes: d4ead6b3 ("net/ipv6: move metrics from dst to rt6_info") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
- 26 Sep, 2018 2 commits
-
-
Parthasarathy Bhuvaragan authored
In tipc_link_reset() we copy the wakeup queue to input queue using skb_queue_splice_init(link->wakeupq, link->inputq). This is performed without holding any locks. The lists might be simultaneously be accessed by other cpu threads in tipc_sk_rcv(), something leading to to random missing packets. Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
If we detect that under lying carrier detects errors and goes down, we reset the bearer. Signed-off-by:
-
- 25 Sep, 2018 12 commits
-
-
Parthasarathy Bhuvaragan authored
In the case of implicit connect message with data > 1K, the flow control accounting is incorrect. At this state, the socket does not know the peer nodes capability and falls back to legacy flow control by return 1, however the receiver of this message will perform the new block accounting. This leads to a slack and eventually traffic disturbance. In this commit, we perform tipc_node_get_capabilities() at implicit connect and perform accounting based on the peer's capability. Signed-off-by:
-
Yunsheng Lin authored
If SMMU is on, there is more likely that skb_shinfo(skb)->frags[i] can not send by a single BD. when this happen, the hns_nic_net_xmit_hw function map the whole data in a frags using skb_frag_dma_map, but unmap each BD' data individually when tx is done, which causes problem when SMMU is on. This patch fixes this problem by ummapping the whole data in a frags when tx is done. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
David S. Miller authored
Jan Beulich says: ==================== xen-netback: hash mapping handling adjustments First and foremost the fix for XSA-270. On top of that further changes which looked desirable to me while investigating that XSA. 1: fix input validation in xenvif_set_hash_mapping() 2: validate queue numbers in xenvif_set_hash_mapping() 3: handle page straddling in xenvif_set_hash_mapping() ==================== Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
-
Jan Beulich authored
There's no guarantee that the mapping array doesn't cross a page boundary. Use a second grant copy operation if necessary. Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Reviewed-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
-
Jan Beulich authored
Checking them before the grant copy means nothing as to the validity of the incoming request. As we shouldn't make the new data live before having validated it, introduce a second instance of the mapping array. Signed-off-by:
-
Jan Beulich authored
Both len and off are frontend specified values, so we need to make sure there's no overflow when adding the two for the bounds check. We also want to avoid undefined behavior and hence use off to index into ->hash.mapping[] only after bounds checking. This at the same time allows to take care of not applying off twice for the bounds checking against vif->num_queues. It is also insufficient to bounds check copy_op.len, as this is len truncated to 16 bits. This is XSA-270 / CVE-2018-15471. Reported-by:
Felix Wilhelm <fwilhelm@google.com> Signed-off-by:
-
Michal Simek authored
Clear ADDR64 dma bit in DMACFG register in case that HW_DMA_CAP_64B is not detected on 64bit system. The issue was observed when bootloader(u-boot) does not check macb feature at DCFG6 register (DAW64_OFFSET) and enabling 64bit dma support by default. Then macb driver is reading DMACFG register back and only adding 64bit dma configuration but not cleaning it out. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiGreg Kroah-Hartman authored
James writes: "SCSI fixes on 20180925 Nine obvious bug fixes mostly in individual drivers. The target fix is of particular importance because it's CVE related." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: don't crash the host on invalid commands scsi: ipr: System hung while dlpar adding primary ipr adapter back scsi: target: iscsi: Use bin2hex instead of a re-implementation scsi: target: iscsi: Use hex2bin instead of a re-implementation scsi: lpfc: Synchronize access to remoteport via rport scsi: ufs: Disable blk-mq for now scsi: sd: Contribute to randomness when running rotational device scsi: ibmvscsis: Ensure partition name is properly NUL terminated scsi: ibmvscsis: Fix a stringop-overflow warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbGreg Kroah-Hartman authored
I wrote: "USB fixes for 4.19-rc6 Here are some small USB core and driver fixes for reported issues for 4.19-rc6. The most visible is the oops fix for when the USB core is built into the kernel that is present in 4.18. Turns out not many people actually do that so it went unnoticed for a while. The rest is some tiny typec, musb, and other core fixes. All have been in linux-next with no reported issues." * tag 'usb-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: mux: Take care of driver module reference counting usb: core: safely deal with the dynamic quirk lists usb: roles: Take care of driver module reference counting USB: handle NULL config in usb_find_alt_setting() USB: fix error handling in usb_driver_claim_interface() USB: remove LPM management from usb_driver_claim_interface() USB: usbdevfs: restore warning for nonsensical flags USB: usbdevfs: sanitize flags more Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()" usb: musb: dsps: do not disable CPPI41 irq in driver teardown
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyGreg Kroah-Hartman authored
I wrote: "TTY/Serial driver fixes for 4.19-rc6 Here are a number of small tty and serial driver fixes for reported issues for 4.19-rc6. One should hopefully resolve a much-reported issue that syzbot has found in the tty layer. Although there are still more issues there, getting this fixed is nice to see finally happen. All of these have been in linux-next for a while with no reported issues." * tag 'tty-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: imx: restore handshaking irq for imx1 tty: vt_ioctl: fix potential Spectre v1 tty: Drop tty->count on tty_reopen() failure serial: cpm_uart: return immediately from console poll tty: serial: lpuart: avoid leaking struct tty_struct serial: mvebu-uart: Fix reporting of effective CSIZE to userspace
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscGreg Kroah-Hartman authored
Greg (well I), wrote: "Char/Misc driver fixes for 4.19-rc6 Here are some soundwire and intel_th (tracing) driver fixes for some reported issues. All of these have been in linux-next for a week with no reported issues." * tag 'char-misc-4.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: intel_th: pci: Add Ice Lake PCH support intel_th: Fix resource handling for ACPI glue layer intel_th: Fix device removal logic soundwire: Fix acquiring bus lock twice during master release soundwire: Fix incorrect exit after configuring stream soundwire: Fix duplicate stream state assignment
-
Lubomir Rintel authored
This changes UAPI, breaking iwd and libell: ell/key.c: In function 'kernel_dh_compute': ell/key.c:205:38: error: 'struct keyctl_dh_params' has no member named 'private'; did you mean 'dh_private'? struct keyctl_dh_params params = { .private = private, ^~~~~~~ dh_private This reverts commit 8a2336e5. Fixes: 8a2336e5 ("uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name") Signed-off-by:Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
