- 10 Jul, 2021 2 commits
-
-
Nobuhiro Iwamatsu authored
The offset variable is checked by at91_rtc_readalarm(), but this check is unnecessary because the previous check knew that the value of this variable was not 0. This removes that unnecessary offset variable checks. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210708051340.341345-1-nobuhiro1.iwamatsu@toshiba.co.jp
-
Nobuhiro Iwamatsu authored
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return value, but doesn't use it. This modifies using the s5m_check_peding_alarm_interrupt()"s return value as the s5m_rtc_read_alarm()'s return value. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
- 09 Jul, 2021 11 commits
-
-
Nobuhiro Iwamatsu authored
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by:
-
Nobuhiro Iwamatsu authored
For C files, use the C99 format (//). Signed-off-by:
-
Nobuhiro Iwamatsu authored
For C files, use the C99 format (//). Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by:
-
Fabio Estevam authored
After updating the datasheet URL, the PCF85063A datasheet revision has changed. Adjust it accordingly. Reported-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Alexandre Belloni authored
Take maintainership of the binding as PAvel said he doesn't have the hardware anymore. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Link: https://lore.kernel.org/r/20210620224030.1115356-1-alexandre.belloni@bootlin.com
-
- 20 Jun, 2021 11 commits
-
-
Fabio Estevam authored
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by:
-
Fabio Estevam authored
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by:
-
Fabio Estevam authored
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by:
-
Geert Uytterhoeven authored
Convert the TI BQ32000 I2C Serial Real-Time Clock Device Tree binding documentation to json-schema. Document missing properties. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Marek Vasut authored
Convert the Epson RX8900 DT bindings to YAML schema. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: kernel@dh-electronics.com Cc: linux-rtc@vger.kernel.org To: devicetree@vger.kernel.org Reviewed-by:
-
Colin Ian King authored
The variable retval is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Martin Fuzzey authored
The STM32MP1 RTC may have 2 clocks, the pclk and the rtc_ck. If clk_prepare_enable() fails for the second clock (rtc_ck) we must only call clk_disable_unprepare() for the first clock (pclk) but currently we call it on both leading to a WARN: [ 15.629568] WARNING: CPU: 0 PID: 146 at drivers/clk/clk.c:958 clk_core_disable+0xb0/0xc8 [ 15.637620] ck_rtc already disabled [ 15.663322] CPU: 0 PID: 146 Comm: systemd-udevd Not tainted 5.4.77-pknbsp-svn5759-atag-v5.4.77-204-gea4235203137-dirty #2413 [ 15.674510] Hardware name: STM32 (Device Tree Support) [ 15.679658] [<c0111148>] (unwind_backtrace) from [<c010c0b8>] (show_stack+0x10/0x14) [ 15.687371] [<c010c0b8>] (show_stack) from [<c0ab3d28>] (dump_stack+0xc0/0xe0) [ 15.694574] [<c0ab3d28>] (dump_stack) from [<c012360c>] (__warn+0xc8/0xf0) [ 15.701428] [<c012360c>] (__warn) from [<c0123694>] (warn_slowpath_fmt+0x60/0x94) [ 15.708894] [<c0123694>] (warn_slowpath_fmt) from [<c053b518>] (clk_core_disable+0xb0/0xc8) [ 15.717230] [<c053b518>] (clk_core_disable) from [<c053c190>] (clk_core_disable_lock+0x18/0x24) [ 15.725924] [<c053c190>] (clk_core_disable_lock) from [<bf0adc44>] (stm32_rtc_probe+0x124/0x5e4 [rtc_stm32]) [ 15.735739] [<bf0adc44>] (stm32_rtc_probe [rtc_stm32]) from [<c05f7d4c>] (platform_drv_probe+0x48/0x98) [ 15.745095] [<c05f7d4c>] (platform_drv_probe) from [<c05f5cec>] (really_probe+0x1f0/0x458) [ 15.753338] [<c05f5cec>] (really_probe) from [<c05f61c4>] (driver_probe_device+0x70/0x1c4) [ 15.761584] [<c05f61c4>] (driver_probe_device) from [<c05f6580>] (device_driver_attach+0x58/0x60) [ 15.770439] [<c05f6580>] (device_driver_attach) from [<c05f6654>] (__driver_attach+0xcc/0x170) [ 15.779032] [<c05f6654>] (__driver_attach) from [<c05f40d8>] (bus_for_each_dev+0x58/0x7c) [ 15.787191] [<c05f40d8>] (bus_for_each_dev) from [<c05f4ffc>] (bus_add_driver+0xdc/0x1f8) [ 15.795352] [<c05f4ffc>] (bus_add_driver) from [<c05f6ed8>] (driver_register+0x7c/0x110) [ 15.803425] [<c05f6ed8>] (driver_register) from [<c01027bc>] (do_one_initcall+0x70/0x1b8) [ 15.811588] [<c01027bc>] (do_one_initcall) from [<c01a1094>] (do_init_module+0x58/0x1f8) [ 15.819660] [<c01a1094>] (do_init_module) from [<c01a0074>] (load_module+0x1e58/0x23c8) [ 15.827646] [<c01a0074>] (load_module) from [<c01a0860>] (sys_finit_module+0xa0/0xd4) [ 15.835459] [<c01a0860>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20) Signed-off-by:
Martin Fuzzey <martin.fuzzey@flowbird.group> Fixes: 4e64350f ("rtc: add STM32 RTC driver") Cc: stable@vger.kernel.org Reviewed-by:
-
Matti Vaittinen authored
The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by:
Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Yang Yingliang authored
Fix the following make W=1 kernel build warnings: drivers/rtc/rtc-m41t80.c:811: warning: expecting prototype for wdt_close(). Prototype was for wdt_release() instead drivers/rtc/rtc-m41t80.c:830: warning: expecting prototype for notify_sys(). Prototype was for wdt_notify_sys() instead Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Yang Yingliang authored
Fix the following make W=1 kernel build warning: drivers/rtc/sysfs.c:115: warning: expecting prototype for rtc_sysfs_show_hctosys(). Prototype was for hctosys_show() instead Signed-off-by:
-
- 24 May, 2021 7 commits
-
-
Martin Kaiser authored
The DryIce-based RTC supports alarms that trigger an interrupt. Configure this interrupt as a wakeup source that wakes the system up from standby mode. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Signed-off-by:
-
Shaokun Zhang authored
'MODULE_ALIAS' is declared twice, cleanup one. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
-
Dan Carpenter authored
The scnprintf() function silently truncates the printf() and returns the number bytes that it was able to copy (not counting the NUL terminator). Thus, the highest value it can return here is "NAME_SIZE - 1" and the overflow check is dead code. Fix this by using the snprintf() function which returns the number of bytes that would have been copied if there was enough space and changing the condition from "> NAME_SIZE" to ">= NAME_SIZE". Fixes: 92589c98 ("rtc-proc: permit the /proc/driver/rtc device to use other devices") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Corentin Labbe authored
Converts rtc/faraday,ftrtc01.txt to yaml. This permits to detect some missing properties: reg, resets, interrupts Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Reviewed-by:
-
Bixuan Cui authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Bixuan Cui <cuibixuan@huawei.com> Signed-off-by:
-
Sebastian Reichel authored
Congatec's QMX6 system on module (SoM) uses a m41t62 as RTC. The modules SQW clock output defaults to 32768 Hz. This behaviour is used to provide the i.MX6 CKIL clock. Once the RTC driver is probed, the clock is disabled and all i.MX6 functionality depending on the 32 KHz clock has undefined behaviour. For example when using the hardware watchdog the system will likely do arbitrary reboots. Referencing the m41t62 directly results in a deadlock. The kernel will see, that i.MX6 system clock needs the RTC clock and do probe deferral. But the i.MX6 I2C module never becomes usable without the i.MX6 CKIL clock and thus the RTC's clock will not be probed. So from the kernel's perspective this is a chicken-and-egg problem. Technically everything is fine by not touching anything, since the RTC clock correctly enables the clock on reset (i.e. on battery backup power loss) and also the bootloader enables it in case an something (e.g. an unpatched kernel) disabled this incorrectly. A workaround for this issue is describing the square wave pin as fixed-clock, which is registered early and basically how this pin is used on the i.MX6. Suggested-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by:
-
Arnd Bergmann authored
The added Kconfig dependency is slightly incorrect, which can lead to a link failure when the watchdog is a loadable module: arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_rtc_based_timers': rtc-bd70528.c:(.text+0x6cc): undefined reference to `bd70528_wdt_set' arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_time': rtc-bd70528.c:(.text+0xaa0): undefined reference to `bd70528_wdt_lock' arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0xab8): undefined reference to `bd70528_wdt_unlock' arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_alm_enable': rtc-bd70528.c:(.text+0xfc0): undefined reference to `bd70528_wdt_lock' arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0x1030): undefined reference to `bd70528_wdt_unlock' The problem is that it allows to be built-in if MFD_ROHM_BD71828 is built-in, even when the watchdog is a loadable module. Rework this so that having the watchdog as a loadable module always forces the rtc to be a module as well instead of built-in, regardless of bd71828. Fixes: c56dc069 ("rtc: bd70528: Support RTC on ROHM BD71815") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
- 09 May, 2021 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Turns out the bio max size change still has issues, so let's get it reverted for 5.13-rc1. We'll shake out the issues there and defer it to 5.14 instead" * tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block: Revert "bio: limit bio max size"
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small SMB3 chmultichannel related changesets (also for stable) from the SMB3 test event this week. The other fixes are still in review/testing" * tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6: smb3: if max_channels set to more than one channel request multichannel smb3: do not attempt multichannel to server which does not support it smb3: when mounting with multichannel include it in requested capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of scheduler updates: - Prevent PSI state corruption when schedule() races with cgroup move. A recent commit combined two PSI callbacks to reduce the number of cgroup tree updates, but missed that schedule() can drop rq::lock for load balancing, which opens the race window for cgroup_move_task() which then observes half updated state. The fix is to solely use task::ps_flags instead of looking at the potentially mismatching scheduler state - Prevent an out-of-bounds access in uclamp caused bu a rounding division which can lead to an off-by-one error exceeding the buckets array size. - Prevent unfairness caused by missing load decay when a task is attached to a cfs runqueue. The old load of the task was attached to the runqueue and never removed. Fix it by enforcing the load update through the hierarchy for unthrottled run queue instances. - A documentation fix fot the 'sched_verbose' command line option" * tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unfairness caused by missing load decay sched: Fix out-of-bound access in uclamp psi: Fix psi state corruption when schedule() races with cgroup move sched,doc: sched_debug_verbose cmdline should be sched_verbose -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A set of locking related fixes and updates: - Two fixes for the futex syscall related to the timeout handling. FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and because it's not set the time namespace adjustment for clock MONOTONIC is applied wrongly. FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its always a relative timeout. - Cleanups in the futex syscall entry points which became obvious when the two timeout handling bugs were fixed. - Cleanup of queued_write_lock_slowpath() as suggested by Linus - Fixup of the smp_call_function_single_async() prototype" * tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Make syscall entry points less convoluted futex: Get rid of the val2 conditional dance futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op") locking/qrwlock: Cleanup queued_write_lock_slowpath() smp: Fix smp_call_function_single_async prototype -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Borislav Petkov: "Handle power-gating of AMD IOMMU perf counters properly when they are used" * tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "A bunch of things accumulated for x86 in the last two weeks: - Fix guest vtime accounting so that ticks happening while the guest is running can also be accounted to it. Along with a consolidation to the guest-specific context tracking helpers. - Provide for the host NMI handler running after a VMX VMEXIT to be able to run on the kernel stack correctly. - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt relevant - real hw supports both) - A code generation improvement to TASK_SIZE_MAX through the use of alternatives - The usual misc and related cleanups and improvements" * tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: x86: Consolidate guest enter/exit logic to common helpers context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain context_tracking: Consolidate guest enter/exit wrappers sched/vtime: Move guest enter/exit vtime accounting to vtime.h sched/vtime: Move vtime accounting external declarations above inlines KVM: x86: Defer vtime accounting 'til after IRQ handling context_tracking: Move guest exit vtime accounting to separate helpers context_tracking: Move guest exit context tracking to separate helpers KVM/VMX: Invoke NMI non-IST entry instead of IST entry x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported x86/resctrl: Fix init const confusion x86: Delete UD0, UD1 traces x86/smpboot: Remove duplicate includes x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
-
