- 28 Feb, 2013 40 commits
-
-
Tejun Heo authored
Convert to the much saner new idr interface. v2: Stefan pointed out that add_client_resource() may be called from non-process context. Preload iff @gfp_mask contains __GFP_WAIT. Also updated to include minor upper limit check. [tim.gardner@canonical.com: fix accidentally orphaned 'minor'[ Signed-off-by:Tejun Heo <tj@kernel.org> Acked-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tejun Heo authored
fw_device_init() didn't check whether the allocated minor number isn't too large. Fail if it goes overflows MINORBITS. Signed-off-by:
-
Tejun Heo authored
Convert to the much saner new idr interface. Signed-off-by:
-
Tejun Heo authored
Convert to the much saner new idr interface. Signed-off-by:
-
Tejun Heo authored
Convert to the much saner new idr interface. Signed-off-by:
-
Tejun Heo authored
Convert to the much saner new idr interface. The existing code looks buggy to me - ID 0 is treated as no-ID but allocation specifies 0 as lower limit and there's no error handling after partial success. This conversion keeps the bugs unchanged. Signed-off-by:
Chas Williams <chas@cmf.nrl.navy.mil> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Tejun Heo authored
Convert to the much saner new idr interface. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tejun Heo authored
Convert to the much saner new idr interface. Both bsg and genhd protect idr w/ mutex making preloading unnecessary. Signed-off-by:
-
Tejun Heo authored
idr allocation in blk_alloc_devt() wasn't synchronized against lookup and removal, and its limit check was off by one - 1 << MINORBITS is the number of minors allowed, not the maximum allowed minor. Add locking and rename MAX_EXT_DEVT to NR_EXT_DEVT and fix limit checking. Signed-off-by:
-
Tejun Heo authored
The current idr interface is very cumbersome. * For all allocations, two function calls - idr_pre_get() and idr_get_new*() - should be made. * idr_pre_get() doesn't guarantee that the following idr_get_new*() will not fail from memory shortage. If idr_get_new*() returns -EAGAIN, the caller is expected to retry pre_get and allocation. * idr_get_new*() can't enforce upper limit. Upper limit can only be enforced by allocating and then freeing if above limit. * idr_layer buffer is unnecessarily per-idr. Each idr ends up keeping around MAX_IDR_FREE idr_layers. The memory consumed per idr is under two pages but it makes it difficult to make idr_layer larger. This patch implements the following new set of allocation functions. * idr_preload[_end]() - Similar to radix preload but doesn't fail. The first idr_alloc() inside preload section can be treated as if it were called with @gfp_mask used for idr_preload(). * idr_alloc() - Allocate an ID w/ lower and upper limits. Takes @gfp_flags and can be used w/o preloading. When used inside preloaded section, the allocation mask of preloading can be assumed. If idr_alloc() can be called from a context which allows sufficiently relaxed @gfp_mask, it can be used by itself. If, for example, idr_alloc() is called inside spinlock protected region, preloading can be used like the following. idr_preload(GFP_KERNEL); spin_lock(lock); id = idr_alloc(idr, ptr, start, end, GFP_NOWAIT); spin_unlock(lock); idr_preload_end(); if (id < 0) error; which is much simpler and less error-prone than idr_pre_get and idr_get_new*() loop. The new interface uses per-pcu idr_layer buffer and thus the number of idr's in the system doesn't affect the amount of memory used for preloading. idr_layer_alloc() is introduced to handle idr_layer allocations for both old and new ID allocation paths. This is a bit hairy now but the new interface is expected to replace the old and the internal implementation eventually will become simpler. Signed-off-by:
-
Tejun Heo authored
Move slot filling to idr_fill_slot() from idr_get_new_above_int() and make idr_get_new_above() directly call it. idr_get_new_above_int() is no longer needed and removed. This will be used to implement a new ID allocation interface. Signed-off-by:
-
Tejun Heo authored
idr uses -1, IDR_NEED_TO_GROW and IDR_NOMORE_SPACE to communicate exception conditions internally. The return value is later translated to errno values using _idr_rc_to_errno(). This is confusing. Drop the custom ones and consistently use -EAGAIN for "tree needs to grow", -ENOMEM for "need more memory" and -ENOSPC for "ran out of ID space". Due to the weird memory preloading mechanism, [ra]_get_new*() return -EAGAIN on memory shortage, so we need to substitute -ENOMEM w/ -EAGAIN on those interface functions. They'll eventually be cleaned up and the translations will go away. This patch doesn't introduce any functional changes. Signed-off-by:
-
Tejun Heo authored
* Move idr_for_each_entry() definition next to other idr related definitions. * Make id[r|a]_get_new() inline wrappers of id[r|a]_get_new_above(). This changes the implementation of idr_get_new() but the new implementation is trivial. This patch doesn't introduce any functional change. Signed-off-by:
-
Tejun Heo authored
* Tab align fields like a normal person. * Drop the unnecessary 0 inits from IDR_INIT(). This patch is purely cosmetic. Signed-off-by:
-
Tejun Heo authored
There was only one legitimate use of idr_remove_all() and a lot more of incorrect uses (or lack of it). Now that idr_destroy() implies idr_remove_all() and all the in-kernel users updated not to use it, there's no reason to keep it around. Mark it deprecated so that we can later unexport it. idr_remove_all() is made an inline function calling __idr_remove_all() to avoid triggering deprecated warning on EXPORT_SYMBOL(). Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop reference to idr_remove_all(). Note that the code wasn't completely correct before because idr_remove() on all entries doesn't necessarily release all idr_layers which could lead to memory leak. Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. The conversion isn't completely trivial for recover_idr_clear() as it's the only place in kernel which makes legitimate use of idr_remove_all() w/o idr_destroy(). Replace it with idr_remove() call inside idr_for_each_entry() loop. It goes on top so that it matches the operation order in recover_idr_del(). Signed-off-by:
-
Tejun Heo authored
Convert recover_idr_clear() to use idr_for_each_entry() instead of idr_for_each(). It's somewhat less efficient this way but it shouldn't matter in an error path. This is to help with deprecation of idr_remove_all(). Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. * drm_ctxbitmap_cleanup() was calling idr_remove_all() but forgetting idr_destroy() thus leaking all buffered free idr_layers. Replace it with idr_destroy(). Signed-off-by:
David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by:
-
Tejun Heo authored
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by:
-
Tejun Heo authored
idr is silly in quite a few ways, one of which is how it's supposed to be destroyed - idr_destroy() doesn't release IDs and doesn't even whine if the idr isn't empty. If the caller forgets idr_remove_all(), it simply leaks memory. Even ida gets this wrong and leaks memory on destruction. There is absoltely no reason not to call idr_remove_all() from idr_destroy(). Nobody is abusing idr_destroy() for shrinking free layer buffer and continues to use idr after idr_destroy(), so it's safe to do remove_all from destroy. In the whole kernel, there is only one place where idr_remove_all() is legitimiately used without following idr_destroy() while there are quite a few places where the caller forgets either idr_remove_all() or idr_destroy() leaking memory. This patch makes idr_destroy() call idr_destroy_all() and updates the function description accordingly. Signed-off-by:
-
Tejun Heo authored
The iteration logic of idr_get_next() is borrowed mostly verbatim from idr_for_each(). It walks down the tree looking for the slot matching the current ID. If the matching slot is not found, the ID is incremented by the distance of single slot at the given level and repeats. The implementation assumes that during the whole iteration id is aligned to the layer boundaries of the level closest to the leaf, which is true for all iterations starting from zero or an existing element and thus is fine for idr_for_each(). However, idr_get_next() may be given any point and if the starting id hits in the middle of a non-existent layer, increment to the next layer will end up skipping the same offset into it. For example, an IDR with IDs filled between [64, 127] would look like the following. [ 0 64 ... ] /----/ | | | NULL [ 64 ... 127 ] If idr_get_next() is called with 63 as the starting point, it will try to follow down the pointer from 0. As it is NULL, it will then try to proceed to the next slot in the same level by adding the slot distance at that level which is 64 - making the next try 127. It goes around the loop and finds and returns 127 skipping [64, 126]. Note that this bug also triggers in idr_for_each_entry() loop which deletes during iteration as deletions can make layers go away leaving the iteration with unaligned ID into missing layers. Fix it by ensuring proceeding to the next slot doesn't carry over the unaligned offset - ie. use round_up(id + 1, slot_distance) instead of id += slot_distance. Signed-off-by:David Teigland <teigland@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tomas Henzl authored
While adding and removing a lot of disks disks and partitions this sometimes shows up: WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted) Hardware name: sysfs: cannot create duplicate filename '/dev/block/259:751' Modules linked in: raid1 autofs4 bnx2fc cnic uio fcoe libfcoe libfc 8021q scsi_transport_fc scsi_tgt garp stp llc sunrpc cpufreq_ondemand powernow_k8 freq_table mperf ipv6 dm_mirror dm_region_hash dm_log power_meter microcode dcdbas serio_raw amd64_edac_mod edac_core edac_mce_amd i2c_piix4 i2c_core k10temp bnx2 sg ixgbe dca mdio ext4 mbcache jbd2 dm_round_robin sr_mod cdrom sd_mod crc_t10dif ata_generic pata_acpi pata_atiixp ahci mptsas mptscsih mptbase scsi_transport_sas dm_multipath dm_mod [last unloaded: scsi_wait_scan] Pid: 44103, comm: async/16 Not tainted 2.6.32-195.el6.x86_64 #1 Call Trace: warn_slowpath_common+0x87/0xc0 warn_slowpath_fmt+0x46/0x50 sysfs_add_one+0xc9/0x130 sysfs_do_create_link+0x12b/0x170 sysfs_create_link+0x13/0x20 device_add+0x317/0x650 idr_get_new+0x13/0x50 add_partition+0x21c/0x390 rescan_partitions+0x32b/0x470 sd_open+0x81/0x1f0 [sd_mod] __blkdev_get+0x1b6/0x3c0 blkdev_get+0x10/0x20 register_disk+0x155/0x170 add_disk+0xa6/0x160 sd_probe_async+0x13b/0x210 [sd_mod] add_wait_queue+0x46/0x60 async_thread+0x102/0x250 default_wake_function+0x0/0x20 async_thread+0x0/0x250 kthread+0x96/0xa0 child_rip+0xa/0x20 kthread+0x0/0xa0 child_rip+0x0/0x20 This most likely happens because dev_t is freed while the number is still used and idr_get_new() is not protected on every use. The fix adds a mutex where it wasn't before and moves the dev_t free function so it is called after device del. Signed-off-by:Tomas Henzl <thenzl@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Zhang Yanfei authored
Though there is no error if we free a NULL pointer, I think we could avoid this behaviour. Change the code a little in kimage_crash_alloc() could avoid this kind of unnecessary free. Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Sasha Levin <sasha.levin@oracle.com> Reviewed-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Zhang Yanfei authored
If kimage_normal_alloc() fails to alloc pages for image->swap_page, it should call kimage_free_page_list() to free allocated pages in image->control_pages list before it frees image. Signed-off-by:
-
Sasha Levin authored
If kimage_normal_alloc() fails to initialize an allocated kimage, it will free the image but would still set 'rimage', as a result kexec_load will try to free it again. This would explode as part of the freeing process is accessing internal members which point to uninitialized memory. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by:
-
Mitsuhiro Tanino authored
This patch exports a PG_hwpoison into vmcoreinfo when CONFIG_MEMORY_FAILURE is defined. "makedumpfile" needs to read information of memory, such as 'mem_section', 'zone', 'pageflags' from vmcore. We introduce a function into "makedumpfile" to exclude hwpoison page from vmcore dump. In order to introduce this function, PG_hwpoison flag have to export into vmcoreinfo. Signed-off-by:
Mitsuhiro Tanino <mitsuhiro.tanino.gm@hitachi.com> Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Mitsuhiro Tanino <mitsuhiro.tanino.gm@hitachi.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Zhang Yanfei authored
hole_end has been checked to make sure it is <= crash_res.end in the while condition check, so the if condition check is duplicate. Signed-off-by:
-
Atsushi Kumagai authored
tAdd adds the values related to buddy system to vmcoreinfo data so that makedumpfile (dump filtering command) can filter out all free pages with the new logic. It's faster than the current logic because it can distinguish free page by analyzing page structure at the same time as filtering for other unnecessary pages (e.g. anonymous page). OTOH, the current logic has to trace free_list to distinguish free pages while analyzing page structure to filter out other unnecessary pages. The new logic uses the fact that buddy page is marked by _mapcount == PAGE_BUDDY_MAPCOUNT_VALUE. But, _mapcount shares its memory with other fields for SLAB/SLUB when PG_slab is set, so we need to check if PG_slab is set or not before looking up _mapcount value. And we can get the order of buddy system from private field. To sum it up, the values below are required for this logic. Required values: - OFFSET(page._mapcount) - OFFSET(page.private) - NUMBER(PG_slab) - NUMBER(PAGE_BUDDY_MAPCOUNT_VALUE) Changelog from v1 to v2: 1. remove SIZE(pageflags) The new logic was changed after I sent v1 patch. Accordingly, SIZE(pageflags) has been unnecessary for makedumpfile. What's makedumpfile: makedumpfile creates a small dumpfile by excluding unnecessary pages for the analysis. To distinguish unnecessary pages, makedumpfile gets the vmcoreinfo data which has the minimum debugging information only for dump filtering. Signed-off-by:
Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Alan Cox authored
If new_nsproxy is set we will always call switch_task_namespaces and then set new_nsproxy back to NULL so the reassignment and fall through check are redundant Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Andrew Morton authored
[akpm@linux-foundation.org: checkpatch fixes] Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Cyrill Gorcunov authored
Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Mandeep Singh Baines authored
Prevents hung_task detector from panicing the machine. This is also needed to prevent this wait from blocking suspend. (It doesnt' currently block suspend but it would once the next patch in this series is applied.) [yongjun_wei@trendmicro.com.cn: kernel/exit.c: remove duplicated include] Signed-off-by:
Mandeep Singh Baines <msb@chromium.org> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
