Convert setting of link proprieties to compat doit calls.

Commands converted in this patch:
TIPC_CMD_SET_LINK_TOL
TIPC_CMD_SET_LINK_PRI
TIPC_CMD_SET_LINK_WINDOW
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert TIPC_CMD_GET_LINKS to compat dumpit and remove global link
counter solely used by the legacy API.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add functionality for safely appending string data to a TLV without
keeping write count in the caller.

Convert TIPC_CMD_SHOW_LINK_STATS to compat dumpit.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a framework for transcoding legacy nl action into actions
(.doit) calls from the new nl API. This is done by converting the
incoming TLV data into netlink data with nested netlink attributes.
Unfortunately due to the randomness of the legacy API we can't do this
generically so each legacy netlink command requires a specific
transcoding recipe. In this case for bearer enable and bearer disable.

Convert TIPC_CMD_ENABLE_BEARER and TIPC_CMD_DISABLE_BEARER into doit
compat calls.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a framework for dumping netlink data from the new netlink
API and formatting it to the old legacy API format. This is done by
looping the dump data and calling a format handler for each entity, in
this case a bearer.

We dump until either all data is dumped or we reach the limited buffer
size of the legacy API. Remember, the legacy API doesn't scale.

In this commit we convert TIPC_CMD_GET_BEARER_NAMES to use the compat
layer.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The new netlink API is no longer "v2" but rather the standard API and
the legacy API is now "nl compat". We split them into separate
start/stop and put them in different files in order to further
distinguish them.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2015-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Major changes:

iwlwifi:

* more work for new devices (4165 / 8260)
* cleanups / improvemnts in rate control
* fixes for TDLS
* major statistics work from Johannes - more to come
* improvements for the fw error dump infrastructure
* usual amount of small fixes here and there (scan, D0i3 etc...)
* add support for beamforming
* enable stuck queue detection for iwlmvm
* a few fixes for EBS scan
* fixes for various failure paths
* improvements for TDLS Offchannel

wil6210:

* performance tuning
* some AP features

brcm80211:

* rework some code in SDIO part of the brcmfmac driver related to
  suspend/resume that were found doing stress testing
* in PCIe part scheduling of worker thread needed to be relaxed
* minor fixes and exposing firmware revision information to
  user-space, ie. ethtool.

mwifiex:

* enhancements for change virtual interface handling
* remove coupling between netdev and FW supported interface
  combination, now conversion from any type of supported interface
  types to any other type is possible
* DFS support in AP mode

ath9k:

* fix calibration issues on some boards
* Wake-on-WLAN improvements

ath10k:

* add support for qca6174 hardware
* enable RX batching to reduce CPU load

Conflicts:
	drivers/net/wireless/rtlwifi/pci.c

Conflict resolution is to get rid of the 'end' label and keep
the rest.
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure root user does not try something stupid.

Also make sure mask field in struct rps_sock_flow_table
does not share a cache line with the potentially often dirtied
flow table.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 567e4b79 ("net: rfs: add hash collision detection")
Signed-off-by: David S. Miller <davem@davemloft.net>

Handle clip_tbl debugfs entry, when clip_tbl isn't allocated.
In commit b5a02f50 ("cxgb4: Update ipv6 address handling api") wrong
argument was passed for single_open for clip_tbl debugfs entry, which led to
below trace. Fixing it.

======
call Trace:
 [<ffffffffa073c606>] clip_tbl_open+0x16/0x30 [cxgb4]
 [<ffffffff8119e2fa>] do_dentry_open+0x21a/0x370
 [<ffffffff8119e499>] vfs_open+0x49/0x50
 [<ffffffff811b0d0e>] do_last+0x21e/0x800
 [<ffffffff811b1382>] path_openat+0x92/0x470
 [<ffffffff8110569f>] ? rb_reserve_next_event+0xaf/0x380
 [<ffffffff8110569f>] ? rb_reserve_next_event+0xaf/0x380
 [<ffffffff811b189a>] do_filp_open+0x4a/0xa0
 [<ffffffff811bdc5d>] ? __alloc_fd+0xcd/0x140
 [<ffffffff8119fa4a>] do_sys_open+0x11a/0x230
 [<ffffffff8101219f>] ? syscall_trace_enter_phase2+0xaf/0x1b0
 [<ffffffff8119fb9e>] SyS_open+0x1e/0x20
 [<ffffffff815bf6f0>] tracesys_phase2+0xd4/0xd9
Code: 89 e5 66 66 66 66 90 48 8b 47 e0 48 8b 40 30 48 8b 40 58 c9 c3 66 0f 1f
84 00 00 00 00 00 55 48 89 e5 66 66 66 66 90 48 8b 47 e0 <48> 8b 40 58 c9 c3 66
66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48
RIP  [<ffffffff8120898d>] PDE_DATA+0xd/0x20
 RSP <ffff8800b08c3c48>
CR2: 0000000000000058

=====
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hex constant chosen for VMXNET3_REV1_MAGIC is offensive,
replace it with its decimal equivalent.
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Reviewed-by: Shreyas Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Receive Flow Steering is a nice solution but suffers from
hash collisions when a mix of connected and unconnected traffic
is received on the host, when flow hash table is populated.

Also, clearing flow in inet_release() makes RFS not very good
for short lived flows, as many packets can follow close().
(FIN , ACK packets, ...)

This patch extends the information stored into global hash table
to not only include cpu number, but upper part of the hash value.

I use a 32bit value, and dynamically split it in two parts.

For host with less than 64 possible cpus, this gives 6 bits for the
cpu number, and 26 (32-6) bits for the upper part of the hash.

Since hash bucket selection use low order bits of the hash, we have
a full hash match, if /proc/sys/net/core/rps_sock_flow_entries is big
enough.

If the hash found in flow table does not match, we fallback to RPS (if
it is enabled for the rxqueue).

This means that a packet for an non connected flow can avoid the
IPI through a unrelated/victim CPU.

This also means we no longer have to clear the table at socket
close time, and this helps short lived flows performance.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove trailing underscore.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

encap.sport and encap.dport are __be16, use nla_{get,put}_be16 instead
of nla_{get,put}_u16.

Fixes the sparse warnings:

warning: incorrect type in assignment (different base types)
   expected restricted __be32 [addressable] [usertype] o_key
   got restricted __be16 [addressable] [usertype] i_flags
warning: incorrect type in assignment (different base types)
   expected restricted __be16 [usertype] sport
   got unsigned short
warning: incorrect type in assignment (different base types)
   expected restricted __be16 [usertype] dport
   got unsigned short
warning: incorrect type in argument 3 (different base types)
   expected unsigned short [unsigned] [usertype] value
   got restricted __be16 [usertype] sport
warning: incorrect type in argument 3 (different base types)
   expected unsigned short [unsigned] [usertype] value
   got restricted __be16 [usertype] dport
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit c637c103 ("tipc: resolve race
problem at unicast message reception") we introduced a time limit
for how long the function tipc_sk_eneque() would be allowed to execute
its loop. Unfortunately, the test for when this limit is passed was put
in the wrong place, resulting in a lost message when the test is true.

We fix this by moving the test to before we dequeue the next buffer
from the input queue.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rt6_probe allocates a struct __rt6_probe_work and schedules a work handler rt6_probe_deferred.
But rt6_probe_deferred kfree's the struct work_struct instead of struct __rt6_probe_work.
This works, because struct work_struct is the first element of struct __rt6_probe_work.

Change it to kfree struct __rt6_probe_work to not implicitly depend on
struct work_struct being the first element.

This does not affect the generated code.
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Neal Cardwellsays:

====================
tcp: mitigate TCP ACK loops due to out-of-window validation dupacks

This patch series mitigates "ack loop" DoS scenarios by rate-limiting
outgoing duplicate ACKs sent in response to incoming "out of window"
segments.

Background
-----------

There are several cases in which the TCP RFCs specify that a TCP
endpoint should send a pure duplicate ACK in response to a pure
duplicate ACK that appears to be invalid due to being "out of window":

(1) RFC 793 (section 3.9, page 69) specifies that endpoints should
    send a duplicate ACK in response to an ACK when the incoming
    sequence number is invalid due to being outside the receive
    window: "If an incoming segment is not acceptable, an
    acknowledgment should be sent in reply".

(2) RFC 793 (section 3.9, page 72) says: "If the ACK acknowledges
    something not yet sent (SEG.ACK > SND.NXT) then send an ACK".

(3) RFC 1323 (section 4.2.1, page 18) specifies that endpoints should
    send a duplicate ACK in response to an ACK when the PAWS check for
    the incoming timestamp value fails: "If .... SEG.TSval < TS.Recent
    and if TS.Recent is valid ... Send an acknowledgement in reply"

The problem
------------

Normally, this is not a problem. However, a buggy middlebox or
malicious man-in-the-middle can inject a few packets into the
conversation that advance each endpoint's notion of the current window
(sequence, ACK, or timestamp), without either side noticing. In this
case, from then on each side can think the other is sending invalid
segments. Thus an infinite feedback loop of duplicate ACKs can ensue,
as each endpoint receives a duplicate ACK, decides that it is invalid
(due to sequence number, ACK number, or timestamp), and then sends a
dupack in reply, which the other side decides is invalid, responding
with a dupack... ad infinitum. This ping-pong feedback loop can happen
at a very high rate.

This phenomenon can and does happen in practice. It has been seen in
datacenter and Internet contexts at Google, and has been documented by
Anil Agarwal in the Nov 2013 tcpm thread "TCP mismatched sequence
numbers issue", and Avery Fay in the Feb 2015 Linux netdev thread
"Invalid timestamp? causing tight ack loop (hundreds of thousands of
packets / sec)".

This patch series
------------------

This patch series mitigates such ack loops by rate-limiting outgoing
duplicate ACKs sent in response to incoming TCP packets that are for
an existing connection but that are invalid due to any of the reasons
mentioned above: sequence number (1), ACK field (2), or timestamp
value (3). The rate limit for such duplicate ACKs is specified by a
new sysctl, tcp_invalid_ratelimit, which specifies the minimal space
between such outbound duplicate ACKs, in milliseconds. The default is
500 (500ms), and 0 disables the mechanism.

We rate-limit these duplicate ACK responses rather than blocking them
entirely or resetting the connection, because legitimate connections
can rely on dupacks in response to some out-of-window segments. For
example, zero window probes are typically sent with a sequence number
that is below the current window, and ZWPs thus expect to thus elicit
a dupack in response.

Testing: this approach has been in use at Google for a while.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure that in state FIN_WAIT2 or TIME_WAIT, where the connection is
represented by a tcp_timewait_sock, we rate limit dupacks in response
to incoming packets (a) with TCP timestamps that fail PAWS checks, or
(b) with sequence numbers that are out of the acceptable window.

We do not send a dupack in response to out-of-window packets if it has
been less than sysctl_tcp_invalid_ratelimit (default 500ms) since we
last sent a dupack in response to an out-of-window packet.
Reported-by: Avery Fay <avery@mixpanel.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure that in state ESTABLISHED, where the connection is represented
by a tcp_sock, we rate limit dupacks in response to incoming packets
(a) with TCP timestamps that fail PAWS checks, or (b) with sequence
numbers or ACK numbers that are out of the acceptable window.

We do not send a dupack in response to out-of-window packets if it has
been less than sysctl_tcp_invalid_ratelimit (default 500ms) since we
last sent a dupack in response to an out-of-window packet.

There is already a similar (although global) rate-limiting mechanism
for "challenge ACKs". When deciding whether to send a challence ACK,
we first consult the new per-connection rate limit, and then the
global rate limit.
Reported-by: Avery Fay <avery@mixpanel.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the SYN_RECV state, where the TCP connection is represented by
tcp_request_sock, we now rate-limit SYNACKs in response to a client's
retransmitted SYNs: we do not send a SYNACK in response to client SYN
if it has been less than sysctl_tcp_invalid_ratelimit (default 500ms)
since we last sent a SYNACK in response to a client's retransmitted
SYN.

This allows the vast majority of legitimate client connections to
proceed unimpeded, even for the most aggressive platforms, iOS and
MacOS, which actually retransmit SYNs 1-second intervals for several
times in a row. They use SYN RTO timeouts following the progression:
1,1,1,1,1,2,4,8,16,32.
Reported-by: Avery Fay <avery@mixpanel.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Helpers for mitigating ACK loops by rate-limiting dupacks sent in
response to incoming out-of-window packets.

This patch includes:

- rate-limiting logic
- sysctl to control how often we allow dupacks to out-of-window packets
- SNMP counter for cases where we rate-limited our dupack sending

The rate-limiting logic in this patch decides to not send dupacks in
response to out-of-window segments if (a) they are SYNs or pure ACKs
and (b) the remote endpoint is sending them faster than the configured
rate limit.

We rate-limit our responses rather than blocking them entirely or
resetting the connection, because legitimate connections can rely on
dupacks in response to some out-of-window segments. For example, zero
window probes are typically sent with a sequence number that is below
the current window, and ZWPs thus expect to thus elicit a dupack in
response.

We allow dupacks in response to TCP segments with data, because these
may be spurious retransmissions for which the remote endpoint wants to
receive DSACKs. This is safe because segments with data can't
realistically be part of ACK loops, which by their nature consist of
each side sending pure/data-less ACKs to each other.

The dupack interval is controlled by a new sysctl knob,
tcp_invalid_ratelimit, given in milliseconds, in case an administrator
needs to dial this upward in the face of a high-rate DoS attack. The
name and units are chosen to be analogous to the existing analogous
knob for ICMP, icmp_ratelimit.

The default value for tcp_invalid_ratelimit is 500ms, which allows at
most one such dupack per 500ms. This is chosen to be 2x faster than
the 1-second minimum RTO interval allowed by RFC 6298 (section 2, rule
2.4). We allow the extra 2x factor because network delay variations
can cause packets sent at 1 second intervals to be compressed and
arrive much closer.
Reported-by: Avery Fay <avery@mixpanel.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Flow alloc needs to initialize unmasked key pointer. Otherwise
it can crash kernel trying to free random unmasked-key pointer.

general protection fault: 0000 [#1] SMP
3.19.0-rc6-net-next+ #457
Hardware name: Supermicro X7DWU/X7DWU, BIOS  1.1 04/30/2008
RIP: 0010:[<ffffffff8111df0e>] [<ffffffff8111df0e>] kfree+0xac/0x196
Call Trace:
 [<ffffffffa060bd87>] flow_free+0x21/0x59 [openvswitch]
 [<ffffffffa060bde0>] ovs_flow_free+0x21/0x23 [openvswitch]
 [<ffffffffa0605b4a>] ovs_packet_cmd_execute+0x2f3/0x35f [openvswitch]
 [<ffffffffa0605995>] ? ovs_packet_cmd_execute+0x13e/0x35f [openvswitch]
 [<ffffffff811fe6fb>] ? nla_parse+0x4f/0xec
 [<ffffffff8139a2fc>] genl_family_rcv_msg+0x26d/0x2c9
 [<ffffffff8107620f>] ? __lock_acquire+0x90e/0x9aa
 [<ffffffff8139a3be>] genl_rcv_msg+0x66/0x89
 [<ffffffff8139a358>] ? genl_family_rcv_msg+0x2c9/0x2c9
 [<ffffffff81399591>] netlink_rcv_skb+0x3e/0x95
 [<ffffffff81399898>] ? genl_rcv+0x18/0x37
 [<ffffffff813998a7>] genl_rcv+0x27/0x37
 [<ffffffff81399033>] netlink_unicast+0x103/0x191
 [<ffffffff81399382>] netlink_sendmsg+0x2c1/0x310
 [<ffffffff811007ad>] ? might_fault+0x50/0xa0
 [<ffffffff8135c773>] do_sock_sendmsg+0x5f/0x7a
 [<ffffffff8135c799>] sock_sendmsg+0xb/0xd
 [<ffffffff8135cacf>] ___sys_sendmsg+0x1a3/0x218
 [<ffffffff8113e54b>] ? get_close_on_exec+0x86/0x86
 [<ffffffff8115a9d0>] ? fsnotify+0x32c/0x348
 [<ffffffff8115a720>] ? fsnotify+0x7c/0x348
 [<ffffffff8113e5f5>] ? __fget+0xaa/0xbf
 [<ffffffff8113e54b>] ? get_close_on_exec+0x86/0x86
 [<ffffffff8135cccd>] __sys_sendmsg+0x3d/0x5e
 [<ffffffff8135cd02>] SyS_sendmsg+0x14/0x16
 [<ffffffff81411852>] system_call_fastpath+0x12/0x17

Fixes: 74ed7ab9("openvswitch: Add support for unique flow IDs.")
CC: Joe Stringer <joestringer@nicira.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Add support to dump some hw debug info

This patch series adds support to dump sensor info, dump Transport Processor
event trace, dump Upper Layer Protocol RX module command trace, dump mailbox
contents and dump Transport Processor congestion control configuration.

Will send a separate patch series for all the hw stats patches, by moving them
to ethtool.

The patches series is created against 'net-next' tree.
And includes patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.

V2: Dopped all hw stats related patches. Added a new patch which adds support to
dump congestion control table.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Dump Transport Processor modules congestion control configuration
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support to dump the current contents of mailbox and the driver which owns
it.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dump Upper Layer Protocol RX module command trace
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dump Transport Processor event trace.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dump out various chip sensor information. Currently Chip Temperature
and Core Voltage.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sathya Perla says:

====================
be2net: patch set

Hi Dave, pls consider applying the following patch-set to the
net-next tree. It has 5 code/style cleanup patches and 4 patches that
add functionality to the driver.

Patch 1 moves routines that were not needed to be in be.h to the respective
src files, to avoid unnecessary compilation.

Patch 2 replaces (1 << x) with BIT(x) macro

Patch 3 refactors code that checks if a FW flash file is compatible
with the adapter. The code is now refactored into 2 routines, the first one
gets the file type from the image file and the 2nd routine checks if the
file type is compatible with the adapter.

Patch 4 adds compatibility checks for flashing a FW image on the new
Skyhawk P2 HW revision.

Patch 5 adds support for a new "offset based" flashing scheme, wherein
the driver informs the FW of the offset at which each component in the flash
file is to be flashed at. This helps flashing components that were
previously not recognized by the running FW.

Patch 6 simplifies the be_cmd_rx_filter() routine, by passing to it the
filter flags already used in the FW cmd, instead of the netdev flags that
were converted to the FW-cmd flags.

Patch 7 introduces helper routines in be_set_rx_mode() and be_vid_config()
to improve code readability.

Patch 8 adds processing of port-misconfig async event sent by the FW.

Patch 9 removes unnecessary swapping of a field in the TX desc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The 32-bit fields of a tx-wrb are little endian. The driver is currently
using be_dws_le_to_cpu() routine to swap (cpu to le) all the fields of
a tx-wrb. So, the rsvd field is also unnecessarily swapped.

This patch fixes this by individually swapping the required fields.
Also, the type of the fields in eth_tx_wrb{} is now changed to __le32
from u32 to avoid sparse warnings.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for processing the port misconfigure async
event generated by the FW. This event is generated typically when an
optical module is incorrectly installed or is faulty.

This patch also moves the port_name field to the adapter struct for
logging the event. As the be_cmd_query_port_name() call is now moved
to be_get_config(), it is modified to use the mailbox instead of MCCQ
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch re-factors the filter setting (uc-list, mc-list, promisc, vlan)
code in be_set_rx_mode() and be_vid_config() to make it more readable
and reduce code duplication.
This patch adds a separate field to track the state/mode of filtering,
along with moving all the filtering related fields to one place in be
be_adapter structure.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch passes BE_IF_FLAGS_XXX flags to be_cmd_rx_filter() routine
instead of the IFF_XXX flags. Doing this gets rid of the code to convert
the IFF_XXX flags to the BE_IF_FLAGS_XXX used by the FW cmd. The patch
also removes code for setting if_flags_mask that was duplicated for each
filter mode.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While sending FW update cmds to the FW, the driver specifies the "type"
of each component that needs to be flashed. The FW then picks the offset
in the flash area at which the componnet is to be flashed. This doesn't work
when new components that the current FW doesn't recognize, need to be
flashed. Recent FWs (10.2 and above) support a scheme of FW-update wherein
the "offset" of the component in the flash area can be specified instead
of the "type". This patch uses the "offset" based FW-update mechanism and
only when it fails, it fallsback to the old "type" based update.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Skyhawk-B0 FW UFI is not compatible to flash on Skyhawk-P2 ASIC.
But, Skyhawk-P2 FW UFI is compatible with both B0 and P2 chips.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch re-factors the code that checks for flash file compatibility with
the chip type, for better readability, as follows:
	- be_get_ufi_type() returns the UFI type from the flash file
	- be_check_ufi_compatibility() checks if the UFI type is compatible
	  with the adapter/chip that is being flashed
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BIT(x) is the preffered usage.
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Routines that are called only inside one src file must remain in that
file itself. Including them in a header file that is used for exporting
routine/struct definitions, causes unnecessary compilation of other
src files, when such a routine is modified.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a missing bridge port check caught by smatch.

setlink/dellink of attributes like vlans can come for a bridge device
and there is no need to offload those today. So, this patch adds a bridge
port check. (In these cases however, the BRIDGE_SELF flags will always be set
and we may not hit a problem with the current code).

smatch complaint:

The patch 68e331c7: "bridge: offload bridge port attributes to
switch asic if feature flag set" from Jan 29, 2015, leads to the
following Smatch complaint:

net/bridge/br_netlink.c:552 br_setlink()
	 error: we previously assumed 'p' could be null (see line 518)

net/bridge/br_netlink.c
   517
   518		if (p && protinfo) {
                    ^
Check for NULL.
Reported-By: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-02-05

This series contains updates to fm10k, ixgbe and ixgbevf.

Matthew fixes an issue where fm10k does not properly drop the upper-most four
bits on of the VLAN ID due to type promotion, so resolve the issue by not
masking off the bits, but by throwing an error if the VLAN ID is out-of-bounds.
Then cleans up two cases where variables were not being used, but were
being set, so just remove the unused variables.

Don cleans up sparse errors in the x550 family file for ixgbe.  Fixed up
a redundant setting of the default value for set_rxpba, which was done
twice accidentally.  Cleaned up the probe routine to remove a redundant
attempt to identify the PHY, which could lead to a panic on x550.  Added
support for VXLAN receive checksum offload in x550 hardware.  Added the
Ethertype Anti-spoofing feature for affected devices.

Emil enables ixgbe and ixgbevf to allow multiple queues in SRIOV mode.
Adds RSS support for x550 per VF.  Fixed up a couple of issues introduced
in commit 2b509c0c ("ixgbe: cleanup ixgbe_ndo_set_vf_vlan"), fixed
setting of the VLAN inside ixgbe_enable_port_vlan() and disable the
"hide VLAN" bit in PFQDE when port VLAN is disabled.  Cleaned up the
setting of vlan_features by enabling all features at once.  Fixed the
ordering of the shutdown patch so that we attempt to shutdown the rings
more gracefully.  We shutdown the main Rx filter in the case of Rx and we
set the carrier_off state in the case of Tx so that packets stop being
delivered from outside the driver.  Then we shutdown interrupts and NAPI,
then finally stop the rings from performing DMA and clean them.  Added
code to allow for Tx hang checking to provide more robust debug info in
the event of a transmit unit hang in ixgbevf.  Cleaned up ixgbevf logic
dealing with link up/down by breaking down the link detection and up/down
events into separate functions, similar to how these events are handled
in other drivers.  Combined the ixgbevf reset and watchdog tasks into a
single task so that we can avoid multiple schedules of the reset task when
we have a reset event needed due to either the mailbox going down or
transmit packets being present on a link down.

v2: Fixed up patch #03 of the series to remove the variable type change
    based on feedback from David Laight
====================
Signed-off-by: David S. Miller <davem@davemloft.net>