Extend ib_device_get_by_index() API to check device access for
net namespace for serving netlink commands.

Also enforce net ns check on dumpit commands which iterate over all
registered rdma devices and which don't call ib_device_get_by_index().
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Introduce an API rdma_dev_access_netns() to check whether a rdma device
can be accessed from the specified net namespace or not.
Use rdma_dev_access_netns() while opening character uverbs, umad network
device and also check while rdma cm_id binds to rdma device.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add module parameter to change a sharing mode of ib_core early in the
boot process. This parameter helps to those systems where modern up
to date rdma tool (iproute2) package may not be available during
kernel upgrade cycle.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Now that sysfs compatibility layer for non init_net exists, add core port
attributes such as pkey and gid table to non init_net ns.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Implement compatibility layer sysfs entries of ib_core so that non
init_net net namespaces can also discover rdma devices.

Each non init_net net namespace has ib_core_device created in it.
Such ib_core_device sysfs tree resembles rdma devices found in
init_net namespace.

This allows discovering rdma devices in multiple non init_net net
namespaces via sysfs entries and helpful to rdma-core userspace.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This is a preparation patch to provide isolation of rdma device in a
network namespace.

As first step, make rdma device visible only in init net namespace.
Subsequent patch will enable rdma device visibility back in multiple net
namespaces using compat ib_core_device device/sysfs tree.

Given that the IB subsystem depends on net stack, it needs to be
initialized after netdev and since it support devices, it needs to be
initialized before the device subsystem; therefore, change initcall
sequence to fs_initcall, so that when ib_core is compiled in the kernel
image, the right init sequence is followed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In order to support sysfs entries in multiple net namespaces for a rdma
device, introduce a ib_core_device whose scope is limited to hold core
device and per port sysfs related entries.

This is preparation patch so that multiple ib_core_devices in each net
namespace can be created in subsequent patch who all can share ib_device.

(a) Move sysfs specific fields to ib_core_device.
(b) Make sysfs and device life cycle related routines to work on
    ib_core_device.
(c) Introduce and use rdma_init_coredev() helper to initialize
    coredev fields.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The buffer that holds the page DMA addresses is sized off umem->nmap.
This can potentially cause out of bound accesses on the PBL array when
iterating the umem DMA-mapped SGL. This is because if umem pages are
combined, umem->nmap can be much lower than the number of system pages
in umem.

Use ib_umem_num_pages() to size this buffer.

Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The buffer that holds the page DMA addresses is sized off umem->nmap.
This can potentially cause out of bound accesses on the PBL array when
iterating the umem DMA-mapped SGL. This is because if umem pages are
combined, umem->nmap can be much lower than the number of system pages
in umem.

Use ib_umem_num_pages() to size this buffer.

Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The buffer that holds the page DMA addresses is sized off umem->nmap.
This can potentially cause out of bound accesses on the PBL array when
iterating the umem DMA-mapped SGL. This is because if umem pages are
combined, umem->nmap can be much lower than the number of system pages
in umem.

Use ib_umem_num_pages() to size this buffer.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The PBL array that hold the page DMA address is sized off umem->nmap.
This can potentially cause out of bound accesses on the PBL array when
iterating the umem DMA-mapped SGL. This is because if umem pages are
combined, umem->nmap can be much lower than the number of system pages
in umem.

Use ib_umem_num_pages() to size this array.

Cc: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

umem->nmap is used while allocating internal buffer for storing
page DMA addresses. This causes out of bounds array access while iterating
the umem DMA-mapped SGL with umem page combining as umem->nmap can be
less than number of system pages in umem.

Use ib_umem_num_pages() instead of umem->nmap to size the page array.
Add a new structure (bnxt_qplib_sg_info) to pass sglist, npages and nmap.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch avoids that a compiler warning is reported when building with
W=1.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: 49c0e241 ("IB/qib: Change SDMA progression mode depending on single- or multi-rail")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Enable format string checking for hfi1_cdbg() and fix the resulting
compiler warnings.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Avoid that sparse complains about a missing declaration.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: 6bf8f22a ("IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch avoids that sparse reports the following warnings:

drivers/infiniband/core/uverbs_std_types_flow_action.c:442:30: warning: symbol 'uverbs_def_obj_flow_action' was not declared. Should it be static?
drivers/infiniband/core/uverbs_std_types_dm.c:112:30: warning: symbol 'uverbs_def_obj_dm' was not declared. Should it be static?
drivers/infiniband/core/uverbs_std_types_counters.c:153:30: warning: symbol 'uverbs_def_obj_counters' was not declared. Should it be static?
drivers/infiniband/core/uverbs_std_types_mr.c:213:30: warning: symbol 'uverbs_def_obj_mr' was not declared. Should it be static?
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: 0bd01f3d ("RDMA/uverbs: Require all objects to have a driver destroy function")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch avoids that sparse complains about a mismatch between the
returned value and the function return type.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: c3bea3d2 ("RDMA/uverbs: Use the iterator for ib_uverbs_unmarshall_recv()")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch avoids that sparse and smatch report the following:

  warning: cast removes address space of expression
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Fixes: 3a6532c9 ("RDMA/uverbs: Use uverbs_attr_bundle to pass udata for write")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In the function rxe_init_packet, based on av->network_type, skb->protocol
is set to ipv4 or ipv6. The functions rxe_prepare and rxe_send are called
after the functin rxe_init_packet.  So in these functions,
av->network_type can be replaced with skb->protocol.

The functions are in the xmit fast path. So with skb->protocol, the
performance will be better.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Provide a count of class types for a summary of MAD packets.  The example
shows one way to filter the trace data based on management class.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Decode more information from the packet and include it in the trace.
Reviewed-by: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Trace MADs going to/from user space.
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Trace agent details when agents are [un]registered.  In addition, report
agent details on send/recv.
Reviewed-by: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Trace received MAD details.
Reviewed-by: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Use the standard Linux trace mechanism to trace MADs being sent.  4 trace
points are added, when the MAD is posted to the qp, when the MAD is
completed, if a MAD is resent, and when the MAD completes in error.
Reviewed-by: "Ruhl, Michael J" <michael.j.ruhl@intel.com>
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove Steve and add undersigned as maintainer for iw_cxgb4 drivers.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Acked-by: Steve Wise <larrystevenwise@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Caller already clears props before calling query_device.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The InfiniBand Architecture Specification section 10.6.7.2.4 TYPE 2 MEMORY
WINDOWS says that if the CI supports the Base Memory Management Extensions
defined in this specification, the R_Key format for a Type 2 Memory Window
must consist of:

* 24 bit index in the most significant bits of the R_Key, which is owned
  by the CI, and
* 8 bit key in the least significant bits of the R_Key, which is owned by
  the Consumer.

This means that the kernel should compare only the index part of a R_Key
to determine equality with another R_Key.

Fixes: db570d7d ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Move index increment after its is used or otherwise it will start the dump
of the WQE from second WQE BB.

Fixes: 34f4c955 ("IB/mlx5: Use fragmented QP's buffer for in-kernel users")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The forgotten static keyword causes to the following error to appear while
building HNS driver. Declare hns_roce_cmq_send() to be static function to
fix this warning.

drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1089:5: warning: no previous
prototype for _hns_roce_cmq_send_ [-Wmissing-prototypes]
 int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,

Fixes: 6a04aed6 ("RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Attempt to use check_shl_overflow() with inputs of unsigned type
produces the following compilation warnings.

drivers/infiniband/hw/mlx5/qp.c: In function _set_user_rq_size_:
./include/linux/overflow.h:230:6: warning: comparison of unsigned
expression >= 0 is always true [-Wtype-limits]
   _s >= 0 && _s < 8 * sizeof(*d) ? _s : 0;  \
      ^~
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
  if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift,
&rwq->buf_size))
      ^~~~~~~~~~~~~~~~~~
./include/linux/overflow.h:232:26: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  (_to_shift != _s || *_d < 0 || _a < 0 ||   \
                          ^
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
  if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift, &rwq->buf_size))
      ^~~~~~~~~~~~~~~~~~
./include/linux/overflow.h:232:36: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
  (_to_shift != _s || *_d < 0 || _a < 0 ||   \
                                    ^
drivers/infiniband/hw/mlx5/qp.c:5820:6: note: in expansion of macro _check_shl_overflow_
  if (check_shl_overflow(rwq->wqe_count, rwq->wqe_shift,&rwq->buf_size))
      ^~~~~~~~~~~~~~~~~~

Fixes: 0c668477 ("overflow.h: Add arithmetic shift helper")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The variable len is not being inintialized and the uninitialized value is
being returned. However, this return path is never reached because the
default case in the switch statement returns -ENOSYS.  Clean up the code
by replacing the return -ENOSYS with a break for the default case and
returning -ENOSYS at the end of the function.  This allows len to be
removed.  Also remove redundant break that follows a return statement.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

alloc_ordered_workqueue may fail and return NULL.  The fix captures the
failure and handles it properly to avoid potential NULL pointer
dereferences.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Shiraz, Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

No device supports ODP MR without an invalidate_range callback.

Warn on any any device which attempts to support ODP without supplying
this callback.

Then we can remove the checks for the callback within the code.

This stems from the discussion

https://www.spinics.net/lists/linux-rdma/msg76460.html

...which concluded this code was no longer necessary.
Acked-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

BUG: KASAN: slab-out-of-bounds in rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
Read of size 8 at addr ffff88805c01a608 by task ib_send_bw/573

CPU: 24 PID: 573 Comm: ib_send_bw Not tainted 5.0.0-rc5+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 rxe_mem_init_user+0x6c1/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs]
 ib_uverbs_ioctl+0x202/0x310 [ib_uverbs]
 do_vfs_ioctl+0x193/0x1440
 ksys_ioctl+0x3a/0x70
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x13f/0x570
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Allocated by task 573:
 __kasan_kmalloc.constprop.5+0xc1/0xd0
 __kmalloc+0x161/0x310
 rxe_mem_alloc+0x52/0x470 [rdma_rxe]
 rxe_mem_init_user+0x113/0x740 [rdma_rxe]
 rxe_reg_user_mr+0x9b/0x110 [rdma_rxe]
 ib_uverbs_reg_mr+0x428/0x9c0 [ib_uverbs]
 ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x2b0/0x410 [ib_uverbs]
 ib_uverbs_run_method+0x79c/0x1da0 [ib_uverbs]
 ib_uverbs_cmd_verbs+0x5f2/0xf20 [ib_uverbs]
 ib_uverbs_ioctl+0x202/0x310 [ib_uverbs]
 do_vfs_ioctl+0x193/0x1440
 ksys_ioctl+0x3a/0x70
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x13f/0x570
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 0:
 __kasan_slab_free+0x12e/0x180
 kfree+0x10a/0x2c0
 rcu_process_callbacks+0xa77/0x1260
 __do_softirq+0x2ad/0xacb

Test scenario:
 ib_send_bw -x 1 -d rxe0 -a &
 ib_send_bw -x 1 -d rxe0 -a localhost

Fixes: 8700e3e7 ("Soft RoCE driver")
Reported-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Adjust the kconfig whitespace in bnxt_re/iser to match the kernel
standard.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The non-null check on udata is redundant as this check was performed just
a few statements earlier and the check is always true as udata must be
non-null at this point. Remove redundant the check on udata and the
redundant else part that can never be executed.

Detected by CoverityScan, CID#1477317 ("Logically dead code")

Fixes: 89944450 ("IB/{hw,sw}: Remove 'uobject->context' dependency in object creation APIs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>