* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (22 commits)
  dma-coherent: Restore dma_alloc_from_coherent() large alloc fall back policy.
  dma-coherent: per-device coherent area is in pages, not bytes.
  sh: fix unaligned and nonexistent address handling
  nommu: Stub in vm_map_ram()/vm_unmap_ram()/vm_unmap_aliases().
  sh: fix sh-sci / early printk build on sh7723
  sh: export the sh7343 JPU to user space
  sh: update defconfigs.
  serial: sh-sci: Fix up SH7720/SH7721 SCI build.
  sh: Kill off obsolete busses from arch/sh/Kconfig.
  sh: sh7785lcr/highlander/hp6xx need linux/irq.h.
  sh: Migo-R MMC support using spi_gpio and mmc_spi.
  sh: ap325rxa MMC support using spi_gpio and mmc_spi
  sh: mach-x3proto: needs linux/irq.h.
  sh: Drop the BKL from sys_execve() on SH-5.
  sh: convert rsk7203 to use smsc911x.
  sh: convert magicpanelr2 platform to use smsc911x.
  sh: convert ap325rxa platform to use smsc911x.
  sh: mach-migor: Add tw9910 support.
  sh: mach-migor: Delete soc_camera_platform setup.
  sh: mach-migor: Add ov772x support.
  ...

* 'Kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/misc: (36 commits)
  fs/Kconfig: move 9p out
  fs/Kconfig: move afs out
  fs/Kconfig: move coda out
  fs/Kconfig: move the rest of ncpfs out
  fs/Kconfig: move smbfs out
  fs/Kconfig: move sunrpc out
  fs/Kconfig: move nfsd out
  fs/Kconfig: move nfs out
  fs/Kconfig: move ufs out
  fs/Kconfig: move sysv out
  fs/Kconfig: move romfs out
  fs/Kconfig: move qnx4 out
  fs/Kconfig: move hpfs out
  fs/Kconfig: move omfs out
  fs/Kconfig: move minix out
  fs/Kconfig: move vxfs out
  fs/Kconfig: move squashfs out
  fs/Kconfig: move cramfs out
  fs/Kconfig: move efs out
  fs/Kconfig: move bfs out
  ...

If userspace supplies an invalid pointer to a read() of an inotify
instance, the inotify device's event list mutex is unlocked twice.
This causes an unbalance which effectively leaves the data structure
unprotected, and we can trigger oopses by accessing the inotify
instance from different tasks concurrently.

The best fix (contributed largely by Linus) is a total rewrite
of the function in question:

On Thu, Jan 22, 2009 at 7:05 AM, Linus Torvalds wrote:
> The thing to notice is that:
>
>  - locking is done in just one place, and there is no question about it
>   not having an unlock.
>
>  - that whole double-while(1)-loop thing is gone.
>
>  - use multiple functions to make nesting and error handling sane
>
>  - do error testing after doing the things you always need to do, ie do
>   this:
>
>        mutex_lock(..)
>        ret = function_call();
>        mutex_unlock(..)
>
>        .. test ret here ..
>
>   instead of doing conditional exits with unlocking or freeing.
>
> So if the code is written in this way, it may still be buggy, but at least
> it's not buggy because of subtle "forgot to unlock" or "forgot to free"
> issues.
>
> This _always_ unlocks if it locked, and it always frees if it got a
> non-error kevent.

Cc: John McCutchan <ttb@tentacle.dhs.org>
Cc: Robert Love <rlove@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use '%zu' to print out a size_t variable, not '%d'.  Another case of the
"let's keep at least Linus' defconfig compile warningless" rule.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix poll notify
  fuse: destroy bdi on umount
  fuse: fuse_fill_super error handling cleanup
  fuse: fix missing fput on error
  fuse: fix NULL deref in fuse_file_alloc()

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debugobjects: add and use INIT_WORK_ON_STACK
  rcu: remove duplicate CONFIG_RCU_CPU_STALL_DETECTOR
  relay: fix lock imbalance in relay_late_setup_files
  oprofile: fix uninitialized use of struct op_entry
  rcu: move Kconfig menu
  softlock: fix false panic which can occur if softlockup_thresh is reduced
  rcu: add __cpuinit to rcu_init_percpu_data()

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: fix inconsistent lock state on resume in hres_timers_resume
  time-sched.c: tick_nohz_update_jiffies should be static
  locking, hpet: annotate false positive warning
  kernel/fork.c: unused variable 'ret'
  itimers: remove the per-cpu-ish-ness

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (29 commits)
  xen: unitialised return value in xenbus_write_transaction
  x86: fix section mismatch warning
  x86: unmask CPUID levels on Intel CPUs, fix
  x86: work around PAGE_KERNEL_WC not getting WC in iomap_atomic_prot_pfn.
  x86: use standard PIT frequency
  xen: handle highmem pages correctly when shrinking a domain
  x86, mm: fix pte_free()
  xen: actually release memory when shrinking domain
  x86: unmask CPUID levels on Intel CPUs
  x86: add MSR_IA32_MISC_ENABLE bits to <asm/msr-index.h>
  x86: fix PTE corruption issue while mapping RAM using /dev/mem
  x86: mtrr fix debug boot parameter
  x86: fix page attribute corruption with cpa()
  Revert "x86: signal: change type of paramter for sys_rt_sigreturn()"
  x86: use early clobbers in usercopy*.c
  x86: remove kernel_physical_mapping_init() from init section
  fix: crash: IP: __bitmap_intersects+0x48/0x73
  cpufreq: use work_on_cpu in acpi-cpufreq.c for drv_read and drv_write
  work_on_cpu: Use our own workqueue.
  work_on_cpu: don't try to get_online_cpus() in work_on_cpu.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  drivers/ide/palm_bk3710.c buildfix
  ide: fix Falcon IDE breakage
  ide: fix IDE PMAC breakage

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  Long btree pointers are still 64 bit on disk
  [XFS] Remove the rest of the macro-to-function indirections.
  xfs: sanity check attr fork size
  xfs: fix bad_features2 fixups for the root filesystem
  xfs: add a lock class for group/project dquots
  xfs: lockdep annotations for xfs_dqlock2
  xfs: add a separate lock class for the per-mount list of dquots
  xfs: use mnt_want_write in compat_attrmulti ioctl
  xfs: fix dentry aliasing issues in open_by_handle

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Add missing comma to SND_SOC_DAPM_SWITCH_E in soc-dapm.h
  ALSA: hda: Add STAC92HD83XXX_PWR_REF quirk
  ALSA: hda: revert change to 92hd83xxx power mapping
  ALSA: hda - Add model entry for HP dv4
  ALSA: hda: 83xxx port 0xe DAC selection
  ASoC: fix registration of the SoC card in the Freescale MPC8610 drivers
  sound: virtuoso: document HDAV1.3 driver status
  sound: virtuoso: add newline
  sound: virtuoso: enable UART on Xonar HDAV1.3
  sound: Remove removed OSS kernel parameters from doc
  ALSA: hda: fix invalid power mapping masks
  ASoC: atmel_pcm: Remove non-existant header
  ALSA: hda - add quirks for some 82801H variants to use ALC883_MITAC
  ALSA: hda - Fix (yet more) STAC925x issues

Move fuse_copy_finish() to before calling fuse_notify_poll_wakeup().
This is not a big issue because fuse_notify_poll_wakeup() should be
atomic, but it's cleaner this way, and later uses of notification will
need to be able to finish the copying before performing some actions.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

If a fuse filesystem is unmounted but the device file descriptor
remains open and a new mount reuses the old device number, then the
mount fails with EEXIST and the following warning is printed in the
kernel log:

  WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x35/0x3d()
  sysfs: duplicate filename '0:15' can not be created

The cause is that the bdi belonging to the fuse filesystem was
destoryed only after the device file was released.  Fix this by
calling bdi_destroy() from fuse_put_super() instead.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org

Clean up error handling for the whole of fuse_fill_super() function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

Fix the leaking file reference if allocation or initialization of
fuse_conn failed.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org

ff is set to NULL and then dereferenced on line 65.  Compile tested only.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org

The return value of xenbus_write_transaction can be uninitialised in
the success case leading to the userspace xenstore utilities failing.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Here function vmi_activate calls a init function activate_vmi , which
causes the following section mismatch warnings:

  LD      arch/x86/kernel/built-in.o
WARNING: arch/x86/kernel/built-in.o(.text+0x13ba9): Section mismatch
in reference from the function vmi_activate() to the function
.init.text:vmi_time_init()
The function vmi_activate() references
the function __init vmi_time_init().
This is often because vmi_activate lacks a __init
annotation or the annotation of vmi_time_init is wrong.

WARNING: arch/x86/kernel/built-in.o(.text+0x13bd1): Section mismatch
in reference from the function vmi_activate() to the function
.devinit.text:vmi_time_bsp_init()
The function vmi_activate() references
the function __devinit vmi_time_bsp_init().
This is often because vmi_activate lacks a __devinit
annotation or the annotation of vmi_time_bsp_init is wrong.

WARNING: arch/x86/kernel/built-in.o(.text+0x13bdb): Section mismatch
in reference from the function vmi_activate() to the function
.devinit.text:vmi_time_ap_init()
The function vmi_activate() references
the function __devinit vmi_time_ap_init().
This is often because vmi_activate lacks a __devinit
annotation or the annotation of vmi_time_ap_init is wrong.

Fix it by marking vmi_activate() as __init too.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: fix boot hang on pre-model-15 Intel CPUs

rdmsrl_safe() does not work in very early bootup code yet, because we
dont have the pagefault handler installed yet so exception section
does not get parsed. rdmsr_safe() will just crash and hang the bootup.

So limit the MSR_IA32_MISC_ENABLE MSR read to those CPU types that
support it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In the absence of PAT, PAGE_KERNEL_WC ends up mapping to a memory type that
gets UC behavior even in the presence of a WC MTRR covering the area in
question.  By swapping to PAGE_KERNEL_UC_MINUS, we can get the actual
behavior the caller wanted (WC if you can manage it, UC otherwise).

This recovers the 40% performance improvement of using WC in the DRM
to upload vertex data.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

the RDC and ELAN platforms use slighly different PIT clocks, resulting in
a timex.h hack that changes PIT_TICK_RATE during build time. But if a
tester enables any of these platform support .config options, the PIT
will be miscalibrated on standard PC platforms.

So use one frequency - in a subsequent patch we'll add a quirk to allow
x86 platforms to define different PIT frequencies.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Commit 1058a75f ("xen: actually release
memory when shrinking domain") causes a crash if the page being released
is a highmem page.

If a page is highmem then there is no need to unmap it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

On -rt we were seeing spurious bad page states like:

Bad page state in process 'firefox'
page:c1bc2380 flags:0x40000000 mapping:c1bc2390 mapcount:0 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Pid: 503, comm: firefox Not tainted 2.6.26.8-rt13 #3
[<c043d0f3>] ? printk+0x14/0x19
[<c0272d4e>] bad_page+0x4e/0x79
[<c0273831>] free_hot_cold_page+0x5b/0x1d3
[<c02739f6>] free_hot_page+0xf/0x11
[<c0273a18>] __free_pages+0x20/0x2b
[<c027d170>] __pte_alloc+0x87/0x91
[<c027d25e>] handle_mm_fault+0xe4/0x733
[<c043f680>] ? rt_mutex_down_read_trylock+0x57/0x63
[<c043f680>] ? rt_mutex_down_read_trylock+0x57/0x63
[<c0218875>] do_page_fault+0x36f/0x88a

This is the case where a concurrent fault already installed the PTE and
we get to free the newly allocated one.

This is due to pgtable_page_ctor() doing the spin_lock_init(&page->ptl)
which is overlaid with the {private, mapping} struct.

union {
    struct {
        unsigned long private;
        struct address_space *mapping;
    };
    spinlock_t ptl;
    struct kmem_cache *slab;
    struct page *first_page;
};

Normally the spinlock is small enough to not stomp on page->mapping, but
PREEMPT_RT=y has huge 'spin'locks.

But lockdep kernels should also be able to trigger this splat, as the
lock tracking code grows the spinlock to cover page->mapping.

The obvious fix is calling pgtable_page_dtor() like the regular pte free
path __pte_free_tlb() does.

It seems all architectures except x86 and nm10300 already do this, and
nm10300 doesn't seem to use pgtable_page_ctor(), which suggests it
doesn't do SMP or simply doesnt do MMU at all or something.
Signed-off-by: Peter Zijlstra <a.p.zijlsta@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>

Typo fix.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Some revisions of the 92hd8xxx codec's not supporting port power
downs in which the using of it causes capture and also randomly
playback streams to not function at all. Thus by disabling it by
default and adding a option to enable it manually will fix all issue
on current and future revisions.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Port 0xe power mapping was incorrect set to 0x80 changed to the correct
value 0x40.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix this:

> It appears that in the upstream balloon driver,
> the call to HYPERVISOR_update_va_mapping is missing
> from decrease_reservation.  I think as a result,
> the balloon driver is eating memory but not
> releasing it to Xen, thus rendering the balloon
> driver essentially useless.  (Can be observed via xentop.)
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Added model=hp-dv5 for HP dv4 (103c:30f7).

Reference: kernel bug #12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>