- 27 Aug, 2020 40 commits
-
-
Dinghao Liu authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 5a25de6d ] Freeing chip on error may lead to an Oops at the next time the system goes to resume. Fix this by removing all snd_echo_free() calls on error. Fixes: 47b5d028 ("ALSA: Echoaudio - Add suspend support #2") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20200813074632.17022-1-dinghao.liu@zju.edu.cnSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 3d858942 ] The event handler loop must be run with interrupts disabled. Otherwise we will have a warning: [ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts [ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170 [ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170 ... [ 1970.946994] Call Trace: [ 1970.949446] <IRQ> [ 1970.951471] handle_irq_event_percpu+0x2c/0x80 [ 1970.955921] handle_irq_event+0x23/0x43 [ 1970.959766] handle_simple_irq+0x57/0x70 [ 1970.963695] generic_handle_irq+0x42/0x50 [ 1970.967717] dln2_rx+0xc1/0x210 [dln2] [ 1970.971479] ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0 [ 1970.976362] __usb_hcd_giveback_urb+0x77/0xe0 [ 1970.980727] usb_giveback_urb_bh+0x8e/0xe0 [ 1970.984837] tasklet_action_common.isra.0+0x4a/0xe0 ... Recently xHCI driver switched to tasklets in the commit 36dc0165 ("usb: host: xhci: Support running urb giveback in tasklet context"). The handle_irq_event_* functions are expected to be called with interrupts disabled and they rightfully complain here because we run in tasklet context with interrupts enabled. Use a event spinlock to protect event handler from being interrupted. Note, that there are only two users of this GPIO and ADC drivers and both of them are using generic_handle_irq() which makes above happen. Fixes: 338a1281 ("mfd: Add support for Diolan DLN-2 devices") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 88b2e9b0 ] The 64 bit ino is being compared to the product of two u32 values, however, the multiplication is being performed using a 32 bit multiply so there is a potential of an overflow. To be fully safe, cast uspi->s_ncg to a u64 to ensure a 64 bit multiplication occurs to avoid any chance of overflow. Fixes: f3e2a520 ("ufs: NFS support") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Alexey Dobriyan <adobriyan@gmail.com> Link: http://lkml.kernel.org/r/20200715170355.1081713-1-colin.king@canonical.com Addresses-Coverity: ("Unintentional integer overflow") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jeffrey Mitchell authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit b4487b93 ] Move the buffer size check to decode_attr_security_label() before memcpy() Only call memcpy() if the buffer is large enough Fixes: aa9c2669 ("NFS: Client implementation of Labeled-NFS") Signed-off-by:
Jeffrey Mitchell <jeffrey.mitchell@starlab.io> [Trond: clean up duplicate test of label->len != 0] Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 4437c115 ] These if statements are supposed to be true if we ended the list_for_each_entry() loops without hitting a break statement but they don't work. In the first loop, we increment "i" after the "if (i == unit)" condition so we don't necessarily know that "i" is not equal to unit at the end of the loop. In the second loop we exit when mode is not pointing to a valid drm_display_mode struct so it doesn't make sense to check "mode->type". Fixes: a278724a ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Roland Scheidegger <sroland@vmware.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit ea38f06e ] Currently when the call to fsp_reg_write fails -EIO is not being returned because the count is being returned instead of the return value in retval. Fix this by returning the value in retval instead of count. Addresses-Coverity: ("Unused value") Fixes: fc69f4a6 ("Input: add new driver for Sentelic Finger Sensing Pad") Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Xu Wang authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 12b90b40 ] In case of error, the function clk_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200713032143.21362-1-vulab@iscas.ac.cnAcked-by:
Barry Song <baohua@kernel.org> Fixes: 7bf21bc8 ("clk: sirf: re-arch to make the codes support both prima2 and atlas6") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 314139f9 ] When the SSR interrupt is activated, it will detect every STOP condition on the bus, not only the ones after we have been addressed. So, enable this interrupt only after we have been addressed, and disable it otherwise. Fixes: de20d185 ("i2c: rcar: add slave support") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
-
Liu Yi L authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 5f77d6ca ] Set proper masks to avoid invalid input spillover to reserved bits. Signed-off-by:
Liu Yi L <yi.l.liu@intel.com> Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200724014925.15523-2-baolu.lu@linux.intel.comSigned-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit dee9d154 ] It is possible for the call to omap_iommu_dump_ctx to return a negative error number, so check for the failure and return the error number rather than pass the negative value to simple_read_from_buffer. Fixes: 14e0e679 ("OMAP: iommu: add initial debugfs support") Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit ce054039 ] Clean up receive processing by dropping the character pointer and keeping the length argument unchanged throughout the function. Also make it more apparent that sysrq processing can consume a characters by adding an explicit continue. Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit ab4cc4ef ] Use an unsigned type for the process-packet buffer argument and give it a more apt name. Reviewed-by:
-
Anton Blanchard authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 89c140bb upstream. Booting with a 4GB LMB size causes us to panic: qemu-system-ppc64: OS terminated: OS panic: Memory block size not suitable: 0x0 Fix pseries_memory_block_size() to handle 64 bit LMBs. Cc: stable@vger.kernel.org Signed-off-by:
Anton Blanchard <anton@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200715000820.1255764-1-anton@ozlabs.orgSigned-off-by:
-
Muchun Song authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 0cb2f137 upstream. We found a case of kernel panic on our server. The stack trace is as follows(omit some irrelevant information): BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0 RSP: 0018:ffffb512c6550998 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000 RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0 RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ftrace_ops_assist_func+0x56/0xe0 ftrace_call+0x5/0x34 tcpa_statistic_send+0x5/0x130 [ttcp_engine] The tcpa_statistic_send is the function being kprobed. After analysis, the root cause is that the fourth parameter regs of kprobe_ftrace_handler is NULL. Why regs is NULL? We use the crash tool to analyze the kdump. crash> dis tcpa_statistic_send -r <tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller> The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller. So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler is NULL. In theory, we should call the ftrace_regs_caller instead of the ftrace_caller. After in-depth analysis, we found a reproducible path. Writing a simple kernel module which starts a periodic timer. The timer's handler is named 'kprobe_test_timer_handler'. The module name is kprobe_test.ko. 1) insmod kprobe_test.ko 2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' 3) echo 0 > /proc/sys/kernel/ftrace_enabled 4) rmmod kprobe_test 5) stop step 2) kprobe 6) insmod kprobe_test.ko 7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' We mark the kprobe as GONE but not disarm the kprobe in the step 4). The step 5) also do not disarm the kprobe when unregister kprobe. So we do not remove the ip from the filter. In this case, when the module loads again in the step 6), we will replace the code to ftrace_caller via the ftrace_module_enable(). When we register kprobe again, we will not replace ftrace_caller to ftrace_regs_caller because the ftrace is disabled in the step 3). So the step 7) will trigger kernel panic. Fix this problem by disarming the kprobe when the module is going away. Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com Cc: stable@vger.kernel.org Fixes: ae6aa16f ("kprobes: introduce ftrace based optimization") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Co-developed-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Junxiao Bi authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 38d51b2d upstream. Dan Carpenter reported the following static checker warning. fs/ocfs2/super.c:1269 ocfs2_parse_options() warn: '(-1)' 65535 can't fit into 32767 'mopt->slot' fs/ocfs2/suballoc.c:859 ocfs2_init_inode_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_inode_steal_slot' fs/ocfs2/suballoc.c:867 ocfs2_init_meta_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_meta_steal_slot' That's because OCFS2_INVALID_SLOT is (u16)-1. Slot number in ocfs2 can be never negative, so change s16 to u16. Fixes: 9277f833 ("ocfs2: fix value of OCFS2_INVALID_SLOT") Reported-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200627001259.19757-1-junxiao.bi@oracle.comSigned-off-by:
-
Mikulas Patocka authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit bc2fbaa4 upstream. sbi->s_freeinodes_counter is only decreased by the ext2 code, it is never increased. This patch fixes it. Note that sbi->s_freeinodes_counter is only used in the algorithm that tries to find the group for new allocations, so this bug is not easily visible (the only visibility is that the group finding algorithm selects inoptinal result). Link: https://lore.kernel.org/r/alpine.LRH.2.02.2004201538300.19436@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Huacai Chen authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 9cce844a upstream. Now CPU#0 is not hotpluggable on MIPS, so prevent to create /sys/devices /system/cpu/cpu0/online which confuses some user-space tools. Cc: stable@vger.kernel.org Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 5981fe5b upstream. This never was intended to be a 'while' loop, it should've just been an 'if' instead of 'while'. Fix this. I noticed this while applying another patch from Ben that intended to fix a busy loop at this spot. Cc: stable@vger.kernel.org Fixes: b16798f5 ("mac80211: mark station unauthorized before key removal") Reported-by:
Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200803110209.253009ae41ff.I3522aad099392b31d5cf2dcca34cbac7e5832dde@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 5fe48867 upstream. There are some meta data of bcache are allocated by multiple pages, and they are used as bio bv_page for I/Os to the cache device. for example cache_set->uuids, cache->disk_buckets, journal_write->data, bset_tree->data. For such meta data memory, all the allocated pages should be treated as a single memory block. Then the memory management and underlying I/O code can treat them more clearly. This patch adds __GFP_COMP flag to all the location allocating >0 order pages for the above mentioned meta data. Then their pages are treated as compound pages now. Signed-off-by:
Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
ChangSyun Peng authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit a1c6ae3d upstream. In degraded raid5, we need to read parity to do reconstruct-write when data disks fail. However, we can not read parity from handle_stripe_dirtying() in force reconstruct-write mode. Reproducible Steps: 1. Create degraded raid5 mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing 2. Set rmw_level to 0 echo 0 > /sys/block/md2/md/rmw_level 3. IO to raid5 Now some io may be stuck in raid5. We can use handle_stripe_fill() to read the parity in this situation. Cc: <stable@vger.kernel.org> # v4.4+ Reviewed-by:
Alex Wu <alexwu@synology.com> Reviewed-by:
BingJing Chang <bingjingc@synology.com> Reviewed-by:
Danny Shih <dannyshih@synology.com> Signed-off-by:
ChangSyun Peng <allenpeng@synology.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Jonathan McDowell authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 592d751c upstream. If we don't have a hardware multicast filter available then instead of silently failing to listen for the requested ethernet broadcast addresses fall back to receiving all multicast packets, in a similar fashion to other drivers with no multicast filter. Cc: stable@vger.kernel.org Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jonathan McDowell authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit df43dd52 upstream. The IPQ806x does not appear to have a functional multicast ethernet address filter. This was observed as a failure to correctly receive IPv6 packets on a LAN to the all stations address. Checking the vendor driver shows that it does not attempt to enable the multicast filter and instead falls back to receiving all multicast packets, internally setting ALLMULTI. Use the new fallback support in the dwmac1000 driver to correctly achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6 functionality on an RB3011 router. Cc: stable@vger.kernel.org Signed-off-by:
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 0c83b277 upstream. Recently random.h started including percpu.h (see commit f227e3ec ("random32: update the net random state on interrupt and activity")), which broke corenet64_smp_defconfig: In file included from /linux/arch/powerpc/include/asm/paca.h:18, from /linux/arch/powerpc/include/asm/percpu.h:13, from /linux/include/linux/random.h:14, from /linux/lib/uuid.c:14: /linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx' 139 | DECLARE_PER_CPU(int, next_tlbcam_idx); This is due to a circular header dependency: asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which includes asm/mmu.h Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it. We can fix it by moving the include of paca.h below the include of asm-generic/percpu.h. This moves the include of paca.h out of the #ifdef __powerpc64__, but that is OK because paca.h is almost entirely inside #ifdef CONFIG_PPC64 anyway. It also moves the include of paca.h out of the #ifdef CONFIG_SMP, which could possibly break something, but seems to have no ill effects. Fixes: f227e3ec ("random32: update the net random state on interrupt and activity") Cc: stable@vger.kernel.org # v5.8 Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 4f26433e upstream. While logging an inode, at copy_items(), if we fail to lookup the checksums for an extent we release the destination path, free the ins_data array and then return immediately. However a previous iteration of the for loop may have added checksums to the ordered_sums list, in which case we leak the memory used by them. So fix this by making sure we iterate the ordered_sums list and free all its checksums before returning. Fixes: 3650860b ("Btrfs: remove almost all of the BUG()'s from tree-log.c") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit bf53d468 upstream. In try_to_merge_free_space we attempt to find entries to the left and right of the entry we are adding to see if they can be merged. We search for an entry past our current info (saved into right_info), and then if right_info exists and it has a rb_prev() we save the rb_prev() into left_info. However there's a slight problem in the case that we have a right_info, but no entry previous to that entry. At that point we will search for an entry just before the info we're attempting to insert. This will simply find right_info again, and assign it to left_info, making them both the same pointer. Now if right_info _can_ be merged with the range we're inserting, we'll add it to the info and free right_info. However further down we'll access left_info, which was right_info, and thus get a use-after-free. Fix this by only searching for the left entry if we don't find a right entry at all. The CVE referenced had a specially crafted file system that could trigger this use-after-free. However with the tree checker improvements we no longer trigger the conditions for the UAF. But the original conditions still apply, hence this fix. Reference: CVE-2019-19448 Fixes: 96303081 ("Btrfs: use hybrid extents+bitmap rb tree for free space") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Rafael J. Wysocki authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit dae68d7f upstream. If context is not NULL in acpiphp_grab_context(), but the is_going_away flag is set for the device's parent, the reference counter of the context needs to be decremented before returning NULL or the context will never be freed, so make that happen. Fixes: edf5bf34 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts") Reported-by:
Vasily Averin <vvs@virtuozzo.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Roger Pau Monne authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 88a479ff upstream. So it can be killed, or else processes can get hung indefinitely waiting for balloon pages. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200727091342.52325-3-roger.pau@citrix.comSigned-off-by:
-
Roger Pau Monne authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 1951fa33 upstream. target_unpopulated is incremented with nr_pages at the start of the function, but the call to free_xenballooned_pages will only subtract pgno number of pages, and thus the rest need to be subtracted before returning or else accounting will be skewed. Signed-off-by:
-
Nathan Huckleberry authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit b4d5ec9b upstream. Since clang does not push pc and sp in function prologues, the current implementation of unwind_frame does not work. By using the previous frame's lr/fp instead of saved pc/sp we get valid unwinds on clang-built kernels. The bounds check on next frame pointer must be changed as well since there are 8 less bytes between frames. This fixes /proc/<pid>/stack. Link: https://github.com/ClangBuiltLinux/linux/issues/912Reported-by:
Miles Chen <miles.chen@mediatek.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Sven Schnelle authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 5b24993c upstream. When using kexec the SBA IOMMU IBASE might still have the RE bit set. This triggers a WARN_ON when trying to write back the IBASE register later, and it also makes some mask calculations fail. Cc: <stable@vger.kernel.org> Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Zheng Bin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit cb0aae0e upstream. v9fs_mount v9fs_session_init v9fs_cache_session_get_cookie v9fs_random_cachetag -->alloc cachetag v9ses->fscache = fscache_acquire_cookie -->maybe NULL sb = sget -->fail, goto clunk clunk_fid: v9fs_session_close if (v9ses->fscache) -->NULL kfree(v9ses->cachetag) Thus memleak happens. Link: http://lkml.kernel.org/r/20200615012153.89538-1-zhengbin13@huawei.com Fixes: 60e78d2c ("9p: Add fscache support to 9p") Cc: <stable@vger.kernel.org> # v2.6.32+ Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Signed-off-by:
Dominique Martinet <asmadeus@codewreck.org> Signed-off-by:
-
Hector Martin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 1b7ecc24 upstream. Further investigation of the L-R swap problem on the MS2109 reveals that the problem isn't that the channels are swapped, but rather that they are swapped and also out of phase by one sample. In other words, the issue is actually that the very first frame that comes from the hardware is a half-frame containing only the right channel, and after that everything becomes offset. So introduce a new quirk field to drop the very first 2 bytes that come in after the format is configured and a capture stream starts. This puts the channels in phase and in the correct order. Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200810082400.225858-1-marcan@marcan.stSigned-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 270ef410 upstream. If the minix filesystem tries to map a very large logical block number to its on-disk location, block_to_path() can return offsets that are too large, causing out-of-bounds memory accesses when accessing indirect index blocks. This should be prevented by the check against the maximum file size, but this doesn't work because the maximum file size is read directly from the on-disk superblock and isn't validated itself. Fix this by validating the maximum file size at mount time. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+c7d9ec7a1a7272dd71b3@syzkaller.appspotmail.com Reported-by: syzbot+3b7b03a0c28948054fb5@syzkaller.appspotmail.com Reported-by: syzbot+6e056ee473568865f3e6@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit facb03dd upstream. If an inode has no links, we need to mark it bad rather than allowing it to be accessed. This avoids WARNINGs in inc_nlink() and drop_nlink() when doing directory operations on a fuzzed filesystem. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a9ac3de1b5de5fb10efc@syzkaller.appspotmail.com Reported-by: syzbot+df958cf5688a96ad3287@syzkaller.appspotmail.com Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit da27e0a0 upstream. Patch series "fs/minix: fix syzbot bugs and set s_maxbytes". This series fixes all syzbot bugs in the minix filesystem: KASAN: null-ptr-deref Write in get_block KASAN: use-after-free Write in get_block KASAN: use-after-free Read in get_block WARNING in inc_nlink KMSAN: uninit-value in get_block WARNING in drop_nlink It also fixes the minix filesystem to set s_maxbytes correctly, so that userspace sees the correct behavior when exceeding the max file size. This patch (of 6): sb_getblk() can fail, so check its return value. This fixes a NULL pointer dereference. Originally from Qiujun Huang. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+4a88b2b9dc280f47baf4@syzkaller.appspotmail.com Signed-off-by:
-
Tom Rix authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit c06c7660 upstream. clang static analysis flags this error qat_uclo.c:297:3: warning: Attempt to free released memory [unix.Malloc] kfree(*init_tab_base); ^~~~~~~~~~~~~~~~~~~~~ When input *init_tab_base is null, the function allocates memory for the head of the list. When there is problem allocating other list elements the list is unwound and freed. Then a check is made if the list head was allocated and is also freed. Keeping track of the what may need to be freed is the variable 'tail_old'. The unwinding/freeing block is while (tail_old) { mem_init = tail_old->next; kfree(tail_old); tail_old = mem_init; } The problem is that the first element of tail_old is also what was allocated for the list head init_header = kzalloc(sizeof(*init_header), GFP_KERNEL); ... *init_tab_base = init_header; flag = 1; } tail_old = init_header; So *init_tab_base/init_header are freed twice. There is another problem. When the input *init_tab_base is non null the tail_old is calculated by traveling down the list to first non null entry. tail_old = init_header; while (tail_old->next) tail_old = tail_old->next; When the unwinding free happens, the last entry of the input list will be freed. So the freeing needs a general changed. If locally allocated the first element of tail_old is freed, else it is skipped. As a bit of cleanup, reset *init_tab_base if it came in as null. Fixes: b4b7e67c ("crypto: qat - Intel(R) QAT ucode part of fw loader") Cc: <stable@vger.kernel.org> Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Hector Martin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 6e859617 upstream. This is just another Pioneer device with fixed endpoints. Input is dummy but used as feedback (it always returns silence). Cc: stable@vger.kernel.org Signed-off-by:
-
Hector Martin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 14a720dc upstream. Matching by device matches all interfaces, which breaks the video/HID portions of the device depending on module load order. Fixes: e337bf19 ("ALSA: usb-audio: add quirk for MacroSilicon MS2109") Cc: stable@vger.kernel.org Signed-off-by:
-
Mirko Dietrich authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit fec90088 upstream. Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3263" Signed-off-by:
Mirko Dietrich <buzz@l4m1.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200806124850.20334-1-buzz@l4m1.deSigned-off-by:
-
Miaohe Lin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit ce787a5a ] We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed accordingly. Fixes: 00e188ef ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
