- 18 Apr, 2018 40 commits
-
-
John Garry authored
When we find an erroneous slot completion, to help aid debugging add the device index to the current debug log. Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Xiaofei Tan authored
There is a bug of v3 hw development version. When AXI error happen, hw may return an abnormal CQ that IPTT value is 0xffff. This will cause IPTT out-of-bounds reference. This patch adds a check of IPTT in cq_tasklet_v3_hw() and discards invalid slot. This workaround scheme is just to enhance fault-tolerance of the driver. So, we will apply this scheme for all version of v3 hw, although release version has fixed this SoC bug. Signed-off-by:
Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by:
-
Xiaofei Tan authored
Currently we check the fis->command value in 2 locations in hisi_sas_get_ata_protocol() switch statement. Fix this by consolidating the check for fis->command value to 1 location only. Signed-off-by:
-
Xiang Chen authored
This is a warning coming from Coccinelle, and need to use new interface dma_zalloc_coherent() instead of dma_alloc_coherent()/memset(). Signed-off-by:
-
Xiang Chen authored
Delete timer for v1 and v3 hw when removing hisi_sas driver. Signed-off-by:
-
Xiaofei Tan authored
There is an modification for later revision of v3 hw. More HW errors are reported through RAS interrupt. These errors were originally reported only through MSI. When report to RAS, some combinations are done to port AXI errors and FIFO OMIT errors. For example, each port has 4 AXI errors, and they are combined to one when report to RAS. This patch does two things: 1. Enable RAS interrupt of these errors and handle them in PCI error handlers. 2. Disable MSI interrupts of these errors for this later revision hw. Signed-off-by:
-
Xiang Chen authored
When directly connected with SATA disks in different SAS cores, fill SAS address with scsi_host's id to make it's fake SAS address unique. Signed-off-by:
-
Uma Krishnan authored
The following Oops can occur when there is heavy I/O traffic and the host is reset by a tool such as sg_reset. [c000200fff3fbc90] c00800001690117c process_cmd_doneq+0x104/0x500 [cxlflash] (unreliable) [c000200fff3fbd80] c008000016901648 cxlflash_rrq_irq+0xd0/0x150 [cxlflash] [c000200fff3fbde0] c000000000193130 __handle_irq_event_percpu+0xa0/0x310 [c000200fff3fbea0] c0000000001933d8 handle_irq_event_percpu+0x38/0x90 [c000200fff3fbee0] c000000000193494 handle_irq_event+0x64/0xb0 [c000200fff3fbf10] c000000000198ea0 handle_fasteoi_irq+0xc0/0x230 [c000200fff3fbf40] c00000000019182c generic_handle_irq+0x4c/0x70 [c000200fff3fbf60] c00000000001794c __do_irq+0x7c/0x1c0 [c000200fff3fbf90] c00000000002a390 call_do_irq+0x14/0x24 [c000200e5828fab0] c000000000017b2c do_IRQ+0x9c/0x130 [c000200e5828fb00] c000000000009b04 h_virt_irq_common+0x114/0x120 When a context is reset, the pending commands are flushed and the AFU is notified. Before the AFU handles this request there could be command completion interrupts queued to PHB which are yet to be delivered to the context. In this scenario, a context could receive an interrupt for a command that has been flushed, leading to a possible crash when the memory for the flushed command is accessed. To resolve this problem, a boolean will indicate if the hardware queue is ready to process interrupts or not. This can be evaluated in the interrupt handler before proessing an interrupt. Signed-off-by:Uma Krishnan <ukrishn@linux.vnet.ibm.com> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Uma Krishnan authored
The following Oops can occur if an internal command sent to the AFU does not complete within the timeout: [c000000ff101b810] c008000016020d94 term_mc+0xfc/0x1b0 [cxlflash] [c000000ff101b8a0] c008000016020fb0 term_afu+0x168/0x280 [cxlflash] [c000000ff101b930] c0080000160232ec cxlflash_pci_error_detected+0x184/0x230 [cxlflash] [c000000ff101b9e0] c00800000d95d468 cxl_vphb_error_detected+0x90/0x150[cxl] [c000000ff101ba20] c00800000d95f27c cxl_pci_error_detected+0xa4/0x240 [cxl] [c000000ff101bac0] c00000000003eaf8 eeh_report_error+0xd8/0x1b0 [c000000ff101bb20] c00000000003d0b8 eeh_pe_dev_traverse+0x98/0x170 [c000000ff101bbb0] c00000000003f438 eeh_handle_normal_event+0x198/0x580 [c000000ff101bc60] c00000000003fba4 eeh_handle_event+0x2a4/0x338 [c000000ff101bd10] c0000000000400b8 eeh_event_handler+0x1f8/0x200 [c000000ff101bdc0] c00000000013da48 kthread+0x1a8/0x1b0 [c000000ff101be30] c00000000000b528 ret_from_kernel_thread+0x5c/0xb4 When an internal command times out, the command buffer is freed while it is still in the pending commands list of the context. This corrupts the list and when the context is cleaned up, a crash is encountered. To resolve this issue, when an AFU command or TMF command times out, the command should be deleted from the hardware queue pending command list before freeing the buffer. Signed-off-by: -
Uma Krishnan authored
The following Oops can be encountered if a device removal or system shutdown is initiated while an EEH recovery is in process: [c000000ff2f479c0] c008000015256f18 cxlflash_pci_slot_reset+0xa0/0x100 [cxlflash] [c000000ff2f47a30] c00800000dae22e0 cxl_pci_slot_reset+0x168/0x290 [cxl] [c000000ff2f47ae0] c00000000003ef1c eeh_report_reset+0xec/0x170 [c000000ff2f47b20] c00000000003d0b8 eeh_pe_dev_traverse+0x98/0x170 [c000000ff2f47bb0] c00000000003f80c eeh_handle_normal_event+0x56c/0x580 [c000000ff2f47c60] c00000000003fba4 eeh_handle_event+0x2a4/0x338 [c000000ff2f47d10] c0000000000400b8 eeh_event_handler+0x1f8/0x200 [c000000ff2f47dc0] c00000000013da48 kthread+0x1a8/0x1b0 [c000000ff2f47e30] c00000000000b528 ret_from_kernel_thread+0x5c/0xb4 The remove handler frees AFU memory while the EEH recovery is in progress, leading to a race condition. This can result in a crash if the recovery thread tries to access this memory. To resolve this issue, the cxlflash remove handler will evaluate the device state and yield to any active reset or probing threads. Signed-off-by: -
Uma Krishnan authored
This commit enables the OCXL operations for the OCXL devices. Signed-off-by:
-
Uma Krishnan authored
The cxlflash core driver resets the AFU when the master contexts are created in the initialization or recovery paths. Today, the OCXL provider service to perform this operation is pending implementation. To avoid a crash due to a missing fop, log an error once and return success to continue with execution. Signed-off-by:
-
Uma Krishnan authored
While enabling a context on the link, a predefined callback can be registered with the OCXL provider services to be notified on translation errors. These errors can in turn be passed back to the user on a read operation. Signed-off-by:
-
Uma Krishnan authored
In order to protect the OCXL hardware contexts from getting clobbered, a simple state machine is added to indicate when a context is in open, close or start state. The expected states are validated throughout the code to prevent illegal operations on a context. A mutex is added to protect writes to the context state field. Signed-off-by:
-
Uma Krishnan authored
The SISLite specification has been updated to define new synchronous interrupt status bits. These bits are set by the AFU when a given PASID or EA is bad and a synchronous interrupt is triggered. The SISLite header file is updated to support these new bits. Note that there are also some formatting updates to some of the existing bits to allow all of the definitions to line up uniformly. Signed-off-by:
-
Uma Krishnan authored
Similar to user contexts, master contexts also require that the per-context LISN registers be programmed for certain AFUs. The mapped trigger page is obtained from underlying transport and registered with AFU for each master context. Signed-off-by:
-
Uma Krishnan authored
The SISLite specification has been updated for OCXL to support communicating data to generate AFU interrupts to the AFU. This includes a new capability bit that is advertised for OCXL AFUs and new registers to hold the object handle and translation PASID of each interrupt. For Power, the object handle is the mapped trigger page. Note that because these mappings are kernel only, the PASID of a kernel context must be used to satisfy the translation. Signed-off-by:
-
Uma Krishnan authored
OCXL requires that AFUs use an opaque object handle to represent an AFU interrupt. The specification does not provide a common means to communicate the object handle to the AFU - each AFU must define this within the AFU specification. To support this model, the object handle must be passed back to the core driver as it manages the AFU specification (SISLite) for cxlflash. Note that for Power systems, the object handle is the effective address of the trigger page. Signed-off-by:
-
Uma Krishnan authored
The cxlflash core fop API requires a way to invoke the fault and release handlers of underlying transports using their native file-based APIs. This provides the core with the ability to insert selectively itself into the processing stream of these operations for cleanup. Implement these two fops to map and release when requested. Signed-off-by:
-
Uma Krishnan authored
The cxlflash userspace API requires that users be able to mmap and release the adapter context. Support mapping by implementing the AFU mmap fop to map the context MMIO space and install the corresponding page table entry upon page fault. Similarly, implement the AFU release fop to terminate and clean up the context when invoked. Signed-off-by:
-
Uma Krishnan authored
The cxlflash userspace API requires that users be able to read the adapter context for any pending events or interrupts from the AFU. Support reading various events by implementing the AFU read fop to copy out event data. Signed-off-by:
-
Uma Krishnan authored
The cxlflash userspace API requires that users be able to poll the adapter context for any pending events or interrupts from the AFU. Support polling on various events by implementing the AFU poll fop using a waitqueue. Signed-off-by:
-
Uma Krishnan authored
User contexts request interrupts and are started using the "start work" interface. Populate the start_work() fop to allocate and map interrupts before starting the user context. As part of starting the context, update the user process identification logic to properly derive the data required by the SPA. Also, introduce a skeleton interrupt handler using a bitmap, flag, and spinlock to track interrupts. This handler will be expanded in future commits. Signed-off-by:
-
Uma Krishnan authored
Add support to map and unmap the irq space and manage irq registrations with the kernel for each allocated AFU interrupt. Also support mapping the physical trigger page to obtain an effective address that will be provided to the cxlflash core in a future commit. Signed-off-by:
-
Uma Krishnan authored
Add support to allocate and free AFU interrupts using the OCXL provider services. The trigger page returned upon successful allocation will be mapped and exposed to the cxlflash core in a future commit. Signed-off-by:
-
Uma Krishnan authored
As part of the context lifecycle, the associated process element within the Shared Process Area (SPA) of the link must be updated. Each process is defined by various parameters (pid, tid, PASID mm) that are stored in the SPA upon starting a context and invalidated when a context is stopped. Use the OCXL provider services to configure the SPA with the appropriate data that is unique to the process when starting a context. Initially only kernel contexts are supported and therefore these process values are not applicable. Note that the OCXL service used has an optional callback for translation fault error notification. While not used here, it will be expanded in a future commit. Also add a service to stop a context by terminating the corresponding PASID and remove the process element from the SPA. Signed-off-by:
-
Uma Krishnan authored
The first function of the link needs to configure the transaction layer between the host and device. This is accomplished by a call to the OCXL provider services. Signed-off-by:
-
Uma Krishnan authored
After reading and modifying the function configuration, setup the OCXL link using the OCXL provider services. The link is released when the adapter is unconfigured. Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
-
Uma Krishnan authored
Use the PCI VPD services to support reading the VPD data of the underlying adapter. Signed-off-by:
-
Uma Krishnan authored
The AFU should be enabled following a successful configuration and disabled near the end of the cleanup path. Signed-off-by:
-
Uma Krishnan authored
Once the context is started, the assigned MMIO space can be mapped and unmapped. Provide means to map and unmap the context MMIO space. Signed-off-by:
-
Uma Krishnan authored
Once the adapter context is created, it needs to be started by assigning the MMIO space for the context and by enabling the process element in the link. This commit adds the skeleton for starting the context and assigns the context specific MMIO space. Master contexts have access to the global MMIO space while the rest have access to the context specific space. Signed-off-by:
-
Uma Krishnan authored
When the AFU is configured, the global and per process MMIO regions are presented by the configuration space. Save these regions and map the global MMIO region that is used to access all of the control and provisioning data in the AFU. Signed-off-by:
-
Uma Krishnan authored
On a PERST, the AFU image can be reloaded or left intact. Provide means to set this image reload policy. Signed-off-by:
-
Uma Krishnan authored
Provide means to obtain the process element of an adapter context as well as locate an adapter context by file. Signed-off-by:
-
Uma Krishnan authored
Allocate a file descriptor for an adapter context when requested. In order to allocate inodes for the file descriptors, a pseudo filesystem is created and used. Signed-off-by:
-
Uma Krishnan authored
A range of PASIDs are used as identifiers for the adapter contexts. These contexts may be destroyed and created randomly. Use an IDR to keep track of contexts that are in use and assign a unique identifier to new ones. Signed-off-by:
-
Uma Krishnan authored
Add support to create and release the adapter contexts for OCXL and provide means to specify certain contexts as a master. The existing cxlflash core has a design requirement that each host will have a single host context available by default. To satisfy this requirement, one host adapter context is created when the hardware AFU is initialized. This is returned by the get_context() fop. Signed-off-by:
-
Uma Krishnan authored
Per the OCXL specification, the maximum PASID supported by the AFU is indicated by a field within the configuration space. Similar to acTags, implementations can choose to use any sub-range of PASID within their assigned range. For cxlflash, the entire range is used. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by:
-
Uma Krishnan authored
The OCXL specification supports distributing acTags amongst different AFUs and functions on the link. As cxlflash devices are expected to only support a single AFU per function, the entire range that was assigned to the function is also assigned to the AFU. Signed-off-by:
-
