- 28 Mar, 2024 9 commits
-
-
Brent Lu authored
Add a common entry in enumeration table for all nau8825 boards with/without speaker amplifier. All other rpl_nau8825_def entries become redundant so get removed. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240327162408.63953-10-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Brent Lu authored
Add a common entry in enumeration table for all nau8825 boards with/without speaker amplifier. All other adl_nau8825_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Add new flags to tplg_quirk_mask to detect and append codec/amplifier tplg suffix to topology file name at runtime. With this feature we could implement an enumeration entry for all boards which implement same headphone codec regardless the speaker amplifier type. Reviewed-by:
-
Brent Lu authored
Add helper functions to get tplg suffix string for specific headphone codec or speaker amplifier. The string could be used to compose the default topology file name for specific headphone codec and speaker amplifier combination. Reviewed-by:
-
Brent Lu authored
Moving all code to snd-soc-acpi-intel-match module and remove the snd-soc-acpi-intel-ssp-common module. Reviewed-by:
-
Brent Lu authored
As we applied new naming convention to functions and structures, changing module name as well to reflect the new naming. Reviewed-by:
-
Brent Lu authored
As we moved ssp-common files to new locations with new names, changing the naming convention from sof_ssp_ to snd_soc_acpi_intel_. Reviewed-by:
-
Brent Lu authored
Moving ssp-common header file from sound/soc/intel/common directory to include/sound directory and rename the file. Keep file content unchanged for tracking purpose. Reviewed-by:
-
Brent Lu authored
Moving ssp-common source and header files from sound/soc/intel/boards directory to sound/soc/intel/common directory and rename the source file. Keep file content unchanged for tracking purpose. Reviewed-by:
-
- 27 Mar, 2024 1 commit
-
-
Ondrej Jirman authored
When CONFIG_SND_JACK_INPUT_DEV is disabled, struct snd_jack doesn't have 'type' field. We can't rely on this field being always present, so store the jack_type in the codec driver itself. Signed-off-by:
Ondrej Jirman <megi@xff.cz> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403261243.kcXCPAYs-lkp@intel.com/ Link: https://msgid.link/r/20240327080542.3649840-1-megi@xff.czSigned-off-by:
-
- 26 Mar, 2024 30 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This second part provides SoundWire-related cleanups and extensions required by Realtek RT722 and Cirrus Logic codecs. Also included is a cleanup of the RT715-sdca DAI naming and new tables for ACPI-based board detections.
-
Andy Shevchenko authored
No more users. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://msgid.link/r/20240326171134.1414462-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Charles Keepax authored
Add support for the optional speaker output on the cs42l43, this uses the new SOF_CODEC_SPKR quirk to conditional include the speaker DAI link. It is worth noting that currently no systems are included that utilise this feature, but the feature is added as several systems are on the horizon. As part of this SOF_SDW_MAX_DAI_NUM must be increased, it is currently 3 but cs42l43 will now have 4 DAI links. This value is increased to 8 to give some head room for future devices. Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Charles Keepax authored
Some codecs have speaker drivers that may or may not be used in a given system. Add a quirk (SOF_CODEC_SPKR) that defines if a system uses the codec speaker, this is kept generic such that any codec with such a speaker DAI can reuse the quirk. For implementation of this, add a quirk field into the sof_sdw_dai_info structure. This field is not used to specify if a system uses a particular quirk, that is still done through the sof_sdw_quirk variable, this field is used to flag a DAI as conditional on a certain quirk. This means the DAI will only be included in the card if sof_sdw_quirk and the DAI quirk field have a matching set bit. Reviewed-by:
-
Charles Keepax authored
Unspecified fields are by default initialised to zero, remove redundant init pointer initialisations. Reviewed-by:
-
Charles Keepax authored
There is no need to pass the snd_soc_acpi_link_adr structure to the init functions, it conveys no specific information about the codec. Remove this parameter from the callbacks Reviewed-by:
-
Bard Liao authored
To use sequential amp numbers. I,e, AMP1, AMP2, AMP3, AMP4 Reviewed-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
-
Bard Liao authored
As rt715-sdca dai name has been changed in codec driver, we should change it in machine driver, too. Changing the dai name in codec_info_list[] also help sof_sdw_rtd_init() to run .rtd_init() from the same codec. Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by:
-
Bard Liao authored
The dai name are the same as rt715 codec. Rename them with rt715-sdca prefix allow machine driver to distinguish rt715 and rt715-sdca from dai name. Reviewed-by:
-
Bard Liao authored
rt_dmic_rtd_init() can be used for rt722 dmic, too. Reviewed-by:
-
Bard Liao authored
Add rt722 into rt_sdca_jack_rtd_init() supported list, and set rtd_init callback directly in codec_info_list[]. No need to use a init callback to set the rtd_init callback. Besides, sof_sdw_rt_sdca_jack_init() doesn't set .rtd_init anymore. Reviewed-by:
-
Bard Liao authored
Some Realtek SDW DMIC codecs use the generic rt_dmic_rtd_init callback now. Remove unused rtd_init callbacks. Reviewed-by:
-
Bard Liao authored
The only thing that the rt_xxx_rtd_init() functions do is to set card->components. And we can set card->components with name_prefix as rt712_sdca_dmic_rtd_init() does. And sof_sdw_rtd_init() will always select the first dai with the given dai->name from codec_info_list[]. Unfortunately, we have different codecs with the same dai name. For example, dai name of rt715 and rt715-sdca are both "rt715-aif2". Using a generic rtd_init allow sof_sdw_rtd_init() run the rtd_init() callback from a similar codec dai. Fixes: 8266c731 ("ASoC: Intel: sof_sdw: add common sdw dai link init") Reviewed-by:
-
Charles Keepax authored
Factor out the creation of the SoundWire DAI links into a helper function. No functional change. Reviewed-by:
-
Charles Keepax authored
The only part left using the old parsing code is now the generation of the actual DAI links. Move this generation over to being based on the new parsing, which allows the removal of the last of the old parsing code. The new DAI link generation is a simple matter of creating a new DAI link for each sof_sdw_dailink struct, and adding a cpu, a codec, and a mapping for each sof_sdw_endpoint contained in that sof_sdw_dailink. Note that the CPUs can be inferred as the endpoint list is iterated, because the endpoints were added into the list sorted by link. Reviewed-by:
-
Charles Keepax authored
append_dai_type should be set to true in any situation that would result in multiple DAI links existing on a single SoundWire bus, because the legacy naming used only the bus number to make things unique. The current code handles this by looking for codecs with multiple dai_info structs and looking for buses that include multiple types of device on them. The first of these assumes that all DAIs on a given device would be in use. The second, with dissimilar aggregation now being supported, isn't really an accurate check either since those devices could be aggregated into a single DAI link. Move the handling for this flag over to the new parsing code and simplify things a little by looking directly for SoundWire links that will contain multiple DAI links to set the flag. These changes should not cause any change in behaviour for any currently supported systems. Reviewed-by:
-
Charles Keepax authored
Trivial move of the handling of ignore_pch_dmic over to the new parsing code. Reviewed-by:
-
Charles Keepax authored
Use the output of the new snd_soc_acpi struct parsing for the purposes of counting the number of SoundWire DAI links and physical devices attached to the SoundWire. These counts are already returned by the parser so those can just be used directly. But the population of the codec_conf structures, is moved from the old parsing code over to the new. As the two parsers currently co-exist it is better to not have them both attempt to modify the same structures. Reviewed-by:
-
Charles Keepax authored
The current machine driver code has a lot of loops parsing through the ACPI structs (snd_soc_acpi_link_adr, snd_soc_acpi_adr_device, snd_soc_acpi_endpoint), this makes it hard to understand exactly what information is being extracted and for what purposes. As well as being slightly inefficient, as the same information is looked up multiple times. There are also some issues with the handling of multiple endpoints on a single device, only the first of the snd_soc_acpi_endpoint structures is currently fully processed by the driver. This means doing things like aggregating the second endpoint on a device with another device are not currently possible. Add new parsing code that will count the devices and endpoints, parse them into an intermediate datastructure, and then use that to create the DAI links. This patch does not actually utilise the results of the parsing, items will be moved across in the following patches. This parsing is based around two new structures which are temporarily allocated whilst parsing. Firstly, sof_sdw_endpoint, which represents a specific endpoint for audio on a device and is more or less directly equivalent to snd_soc_acpi_endpoint. Secondly, sof_sdw_dailink which represents a DAI link and contains a linked list of one or more sof_sdw_endpoints. A single trip through the snd_soc_acpi data structures is used to populate these. One important point to note here is the use of the num field in snd_soc_acpi_endpoint to address sof_sdw_dai_info array in the sof_sdw_codec_info struct. This expects a one to one mapping between endpoints on a device and dai infos. It would be fine for a specific system to not specify an endpoint for all of the dai infos available, but two endpoints mapping to the same dai info would make not sense. Reviewed-by:
-
Charles Keepax authored
Currently the cs42l43 just specifies a single endpoint, as the current machine driver only looks at the first endpoint specified. Future refactoring will process all endpoints, as such proper specification should be added for all the cs42l43 endpoints. Reviewed-by:
-
Charles Keepax authored
The SOF_SDW_NO_AGGREGATION quirk is mostly for debug and no longer works correctly with the current state of the machine driver. Remove it from the code and add an error message if someone uses it. Reviewed-by:
-
Balamurugan C authored
Adding rt711 sdca codec support for arl boards. Reviewed-by:
Balamurugan C <balamurugan.c@intel.com> Signed-off-by:
-
Charles Keepax authored
In preparation for future refactoring pull out a helper specifically for generating the codec name. Reviewed-by:
-
Charles Keepax authored
Factor out the creation of the BlueTooth DAI links into a helper function. No functional change. Reviewed-by:
-
Charles Keepax authored
Factor out the creation of the HDMI DAI links into a helper function. No functional change. Reviewed-by:
-
Charles Keepax authored
Factor out the creation of the DMIC DAI links into a helper function. No functional change. Reviewed-by:
-
Charles Keepax authored
Factor out the creation of the SSP DAI links into a helper function. No functional change. Reviewed-by:
-
Charles Keepax authored
Rather than open coding a loop to process each bit use for_each_set_bit. Reviewed-by:
-
Charles Keepax authored
Rather than passing around a pointer to the dai_link array and an index into this array, simply pass a pointer to the current dai_link. Also move the DAI link pointer sanity check to the end of the DAI link creation, and change it to a warn on. This check should only be hit if there is a serious bug in the machine driver, so checking it on each iteration is excessive. Reviewed-by:
-
Charles Keepax authored
Move the flags ignore_pch_dmic and append_dai_type into the drivers private structure rather than passing them around between functions. Reviewed-by:
-
