When loading symbols in a data mapping, ABS symbols (which has a value
of SHN_ABS in its st_shndx) failed at elf_getscn().  And it marks the
loading as a failure so already loaded symbols cannot be fixed up.

I'm not sure what should be done. Just ignore them for now. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1353502185-26521-19-git-send-email-eranian@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently we don't properly display hist data with symbol_conf.field_sep
separator. We need to display either space or separator.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-cyggwys0bz5kqdowwvfd8h72@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding perf_hpp__list list to register and contain all period related
columns the command is interested in.

This way we get rid of static array holding all possible columns and
enable commands to register their own columns.

It'll be handy for diff command in future to process and display data
for multiple files.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-kiykge4igrcl7etmpmveto1h@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This is a suggested patch to fix the bug I reported at:

	http://marc.info/?l=linux-kernel&m=135033028924652&w=2

Essentially, there is a hard requirement that when perf analyzes a
trace, it must have the entire thing mmap()'d.

Therefore the scheme used on 32-bit where we have a fixed (8) number of
32MB mmaps, and cycle through them, simply does not work.

One of the reasons this requirement exists is because the iterators
maintain references to perf entry objects and those references don't
just simply go away when this mmap code decides to cycle an old mmap
area out and reuse it.  At this point, those entry pointers now point to
garbage resulting in unpredictable behavior and crashes.

It is better to try to mmap() as much as we can and if we do actually
run into address space limitations, the failure of the mmap() call will
indicate that and stop processing.

I noticed that perf_session->mmap_window is set to a constant in one
location, and only used in one other location.  So I got rid of it
altogether.

So we adjust the size of the mmaps[] array to the maximum we could need.
On 64-bit we only need one slot.  On 32-bit we could need up to 128 (128
* 32MB == 4GB).

I've verified that this allows a large (~600MB) perf.data file to be
analyzed properly with a 32-bit perf binary, which previously was not
possible.
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20121110.141219.582924082787523608.davem@davemloft.netSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The perf_event__process_sample function, when not finding a machine
associated with a sample, was calling pr_err without a newline,
garbling the screen on TUI mode due to a problem introduced by a
recent ui_helpline patch.

On --stdio it would just concatenate the messages for each sample with
no machine associated, fix it by adding the newline.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vuz88welqvp15c2uybd9osnz@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The perf session environment information was saved (so allocated) during
perf_session__open, but was not freed.  As free(3) handles NULL pointer
input properly it won't cause a issue for writing modes - e.g. perf
record
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1353472999-23042-1-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Current perf build process checks various system configuration on
invocation to make.  But this is not needed just for cleaning.

To do that, move some of python related variables out of conditional
since 'clean' target needs them.  Normal path should not be affected by
this.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1352867990-658-1-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The ui_helpline__vshow() will be used for pr_* functions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1352911664-24620-3-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It is used everywhere so always build it regardless of ui engine.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1352911664-24620-2-git-send-email-namhyung@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Was ignoring the dso type (function vs. variable) and was therefore
printing bogus information.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20121120095101.GA5939@quadSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core

Pull ftrace updates from Steve Rostedt.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'uprobes/core' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc into perf/core

Pull uprobes fixes, cleanups and preparation for the ARM port from Oleg Nesterov.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Conflicts:
	tools/perf/Makefile
	tools/perf/builtin-test.c
	tools/perf/perf.h
	tools/perf/tests/parse-events.c
	tools/perf/util/evsel.h
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 - UAPI fixes, from David Howels

 - Separate perf tests into multiple objects, one per test, from Jiri Olsa.

 - Fixes to /proc/pid/maps parsing, preparatory to supporting data maps,
   from Namhyung Kim

 - Fix compile error for non-NEWT builds, from Namhyung Kim

 - Implement ui_progress for GTK, from Namhyung Kim
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull networking fixes from David Miller:
 "Two stragglers:

   1) The new code that adds new flushing semantics to GRO can cause SKB
      pointer list corruption, manage the lists differently to avoid the
      OOPS.  Fix from Eric Dumazet.

   2) When TCP fast open does a retransmit of data in a SYN-ACK or
      similar, we update retransmit state that we shouldn't triggering a
      WARN_ON later.  Fix from Yuchung Cheng."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: gro: fix possible panic in skb_gro_receive()
  tcp: bug fix Fast Open client retransmission

commit 2e71a6f8 (net: gro: selective flush of packets) added
a bug for skbs using frag_list. This part of the GRO stack is rarely
used, as it needs skb not using a page fragment for their skb->head.

Most drivers do use a page fragment, but some of them use GFP_KERNEL
allocations for the initial fill of their RX ring buffer.

napi_gro_flush() overwrite skb->prev that was used for these skb to
point to the last skb in frag_list.

Fix this using a separate field in struct napi_gro_cb to point to the
last fragment.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If SYN-ACK partially acks SYN-data, the client retransmits the
remaining data by tcp_retransmit_skb(). This increments lost recovery
state variables like tp->retrans_out in Open state. If loss recovery
happens before the retransmission is acked, it triggers the WARN_ON
check in tcp_fastretrans_alert(). For example: the client sends
SYN-data, gets SYN-ACK acking only ISN, retransmits data, sends
another 4 data packets and get 3 dupacks.

Since the retransmission is not caused by network drop it should not
update the recovery state variables. Further the server may return a
smaller MSS than the cached MSS used for SYN-data, so the retranmission
needs a loop. Otherwise some data will not be retransmitted until timeout
or other loss recovery events.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Chris Ball:
 "Two small regression fixes:

   - sdhci-s3c: Fix runtime PM regression against 3.7-rc1
   - sh-mmcif: Fix oops against 3.6"

* tag 'mmc-fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sh-mmcif: avoid oops on spurious interrupts (second try)
  Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts"
  mmc: sdhci-s3c: fix missing clock for gpio card-detect

This fixes a regression in 3.7-rc, which has since gone into stable.

Commit 00442ad0 ("mempolicy: fix a memory corruption by refcount
imbalance in alloc_pages_vma()") changed get_vma_policy() to raise the
refcount on a shmem shared mempolicy; whereas shmem_alloc_page() went
on expecting alloc_page_vma() to drop the refcount it had acquired.
This deserves a rework: but for now fix the leak in shmem_alloc_page().

Hugh: shmem_swapin() did not need a fix, but surely it's clearer to use
the same refcounting there as in shmem_alloc_page(), delete its onstack
mempolicy, and the strange mpol_cond_copy() and __mpol_cond_copy() -
those were invented to let swapin_readahead() make an unknown number of
calls to alloc_pages_vma() with one mempolicy; but since 00442ad0,
alloc_pages_vma() has kept refcount in balance, so now no problem.
Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a zone meets its high watermark and is compactable in case of
higher order allocations, it contributes to the percentage of the node's
memory that is considered balanced.

This requirement, that a node be only partially balanced, came about
when kswapd was desparately trying to balance tiny zones when all bigger
zones in the node had plenty of free memory.  Arguably, the same should
apply to compaction: if a significant part of the node is balanced
enough to run compaction, do not get hung up on that tiny zone that
might never get in shape.

When the compaction logic in kswapd is reached, we know that at least
25% of the node's memory is balanced properly for compaction (see
zone_balanced and pgdat_balanced).  Remove the individual zone checks
that restart the kswapd cycle.

Otherwise, we may observe more endless looping in kswapd where the
compaction code loops back to reclaim because of a single zone and
reclaim does nothing because the node is considered balanced overall.

See for example

  https://bugzilla.redhat.com/show_bug.cgi?id=866988Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-and-tested-by: Thorsten Leemhuis <fedora@leemhuis.info>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: John Ellson <john.ellson@comcast.net>
Tested-by: Zdenek Kabelac <zkabelac@redhat.com>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0bf380bc ("mm: compaction: check pfn_valid when entering a
new MAX_ORDER_NR_PAGES block during isolation for migration") added a
check for pfn_valid() when isolating pages for migration as the scanner
does not necessarily start pageblock-aligned.

Since commit c89511ab ("mm: compaction: Restart compaction from near
where it left off"), the free scanner has the same problem.  This patch
makes sure that the pfn range passed to isolate_freepages_block() is
within the same block so that pfn_valid() checks are unnecessary.

In answer to Henrik's wondering why others have not reported this:
reproducing this requires a large enough hole with the right aligment to
have compaction walk into a PFN range with no memmap.  Size and
alignment depends in the memory model - 4M for FLATMEM and 128M for
SPARSEMEM on x86.  It needs a "lucky" machine.
Reported-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious
interrupts without any active request. To prevent the Oops, that results
in such cases, don't dereference the mmc request pointer until we make
sure, that we are indeed processing such a request.
Reported-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Chris Ball <cjb@laptop.org>

This reverts commit 8464dd52, which was a misapplied debugging
version of the patch, not the final patch itself.
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: stable@vger.kernel.org

2abeb5c5 ("Add clk_(enable/disable) in runtime suspend/resume")
added the capability to stop the clocks when the device is runtime
suspended, but forgot to handle the case of the card-detect using
an external gpio.

Therefore in the case that runtime-pm is enabled, start the io-clock
when a card is inserted and stop it again once it is removed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

Pull MIPS fixes from Ralf Baechle:
 "These are the fixes for the N32 syscall bugs found by Al, an
  extraneous break that broke detection for R3000 and R3081 processors,
  an endless loop processing signals for kernel task (x86 received the
  same fix a while ago) and a fix for transparent huge page which took
  ages to track down because it was so hard to come up with a workable
  test case."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix endless loop when processing signals for kernel tasks
  MIPS: R3000/R3081: Fix CPU detection.
  MIPS: N32: Fix signalfd4 syscall entry point
  MIPS: N32: Fix preadv(2) and pwritev(2) entry points.
  MIPS: Avoid mcheck by flushing page range in huge_ptep_set_access_flags()

Pull build fix from Rusty Russell:
 "Tim Gardner <tim.gardner@canonical.com> writes:
  > It is $(obj)/oid_registry.o that is dependent on $(obj)/oid_registry_data.c.
  > The object file cannot be built until $(obj)/oid_registry_data.c has been
  > generated.
  >
  > A periodic and hard to reproduce parallel build failure is due to
  > this incorrect lib/Makefile dependency. The compile error is completely
  > disingenuous.
  >
  >   GEN     lib/oid_registry_data.c
  > Compiling 49 OIDs
  >   CC      lib/oid_registry.o
  > gcc: error: lib/oid_registry.c: No such file or directory
  > gcc: fatal error: no input files
  > compilation terminated.
  > make[3]: *** [lib/oid_registry.o] Error 4

  I can't reproduce it either.  It's completely weird; nothing ever
  removes lib/oid_registry.c, so either gcc is giving the wrong message
  or it's a weird fs with a very odd race.

  But your version is definitely more correct than the previous one,
  so..."

* 'more-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  lib/Makefile: Fix oid_registry build dependency

Pull module signing fixes from Rusty Russell:
 "David gave me these a month ago, during my git workflow churn :("

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  ASN.1: Fix an indefinite length skip error
  MODSIGN: Don't use enum-type bitfields in module signature info block

Pull watchdog fix from Thomas Gleixner:
 "Trivial CPU hotplug regression fix for the watchdog code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog: Fix CPU hotplug regression

It is $(obj)/oid_registry.o that is dependent on $(obj)/oid_registry_data.c.
The object file cannot be built until $(obj)/oid_registry_data.c has been
generated.

A periodic and hard to reproduce parallel build failure is due to
this incorrect lib/Makefile dependency. The compile error is completely
disingenuous.

  GEN     lib/oid_registry_data.c
Compiling 49 OIDs
  CC      lib/oid_registry.o
gcc: error: lib/oid_registry.c: No such file or directory
gcc: fatal error: no input files
compilation terminated.
make[3]: *** [lib/oid_registry.o] Error 4

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The problem occurs [1] when a kernel-mode task returns from a system
call with a pending signal.

A real-life scenario is a child of 'khelper' returning from a failed
kernel_execve() in ____call_usermodehelper() [ kernel/kmod.c ].
kernel_execve() fails due to a pending SIGKILL, which is the result of
"kill -9 -1" (at least, busybox's init does it upon reboot).

The loop is as follows:

* syscall_exit_work:
 - work_pending:            // start_of_the_loop
 - work_notifysig:
   - do_notify_resume()
     - do_signal()
       - if (!user_mode(regs)) return;
 - resume_userspace         // TIF_SIGPENDING is still set
 - work_pending             // so we call work_pending => goto
                            // start_of_the_loop

More information can be found in another LKML thread:
http://www.serverphorums.com/read.php?12,457826

[1] The problem was also reproduced on !CONFIG_VM86 x86, and the
following fix was accepted.

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=29a2e2836ff9ea65a603c89df217f4198973a74fSigned-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3571/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Broken since e05ea74fc56f347f872ef9946d27c53e8bf20864 (lmo) rsp.
cea7e2df (kernel.org) [MIPS: Sort out CPU
type to name translation.]  These CPUs are no longer very popular to say
the least ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Murphy McCauley <murphy.mccauley@gmail.com>

This needs to use the compat entry point or it's going to fail on big
endian systems.

Noticed by Al Viro.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

READ is zero so the "rw & READ" test is always false.  The intended test
was "((rw & RW_MASK) == READ)".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix an error in asn1_find_indefinite_length() whereby small definite length
elements of size 0x7f are incorrecly classified as non-small.  Without this
fix, an error will be given as the length of the length will be perceived as
being very much greater than the maximum supported size.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Don't use enum-type bitfields in the module signature info block as we can't be
certain how the compiler will handle them.  As I understand it, it is arch
dependent, and it is possible for the compiler to rearrange them based on
endianness and to insert a byte of padding to pad the three enums out to four
bytes.

Instead use u8 fields for these, which the compiler should emit in the right
order without padding.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Norbert reported:
"3.7-rc6 booted with nmi_watchdog=0 fails to suspend to RAM or
 offline CPUs. It's reproducable with a KVM guest and physical
 system."

The reason is that commit bcd951cf(watchdog: Use hotplug thread
infrastructure) missed to take this into account. So the cpu offline
code gets stuck in the teardown function because it accesses non
initialized data structures.

Add a check for watchdog_enabled into that path to cure the issue.
Reported-and-tested-by: Norbert Warmuth <nwarmuth@t-online.de>
Tested-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1211231033230.2701@ionos
Link: http://bugs.launchpad.net/bugs/1079534Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull module fixes from Rusty Russell:
 "Module signing build fixes for blackfin and metag"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modsign: add symbol prefix to certificate list
  linux/kernel.h: define SYMBOL_PREFIX

Pull UBI changes from Artem Bityutskiy:
 "Fixes for 2 brown-paperbag bugs introduced this merge window by the
  fastmap code:

   1.  The UBI background thread got stuck when a bit-flip happened
       because free LEBs was not removed from the "free" tree when we
       started using it.
   2.  I/O debugging checks did not work because we called a sleeping
       function in atomic context."

* tag 'upstream-3.7-rc9' of git://git.infradead.org/linux-ubi:
  UBI: dont call ubi_self_check_all_ff() in __wl_get_peb()
  UBI: remove PEB from free tree in get_peb_for_wl()

Pull workqueue fixes from Tejun Heo:
 "So, safe fixes my ass.

  Commit 8852aac2 ("workqueue: mod_delayed_work_on() shouldn't queue
  timer on 0 delay") had the side-effect of performing delayed_work
  sanity checks even when @delay is 0, which should be fine for any sane
  use cases.

  Unfortunately, megaraid was being overly ingenious.  It seemingly
  wanted to use cancel_delayed_work_sync() before cancel_work_sync() was
  introduced, but didn't want to waste the space for full delayed_work
  as it was only going to use 0 @delay.  So, it only allocated space for
  struct work_struct and then cast it to struct delayed_work and passed
  it into delayed_work functions - truly awesome engineering tradeoff to
  save some bytes.

  Xiaotian fixed it by making megraid allocate full delayed_work for
  now.  It should be converted to use work_struct and cancel_work_sync()
  but I think we better do that after 3.7.

  I added another commit to change BUG_ON()s in __queue_delayed_work()
  to WARN_ON_ONCE()s so that the kernel doesn't crash even if there are
  more such abuses."

* 'for-3.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s
  megaraid: fix BUG_ON() from incorrect use of delayed work

By using the native syscall entry point the kernel was also expecting
64-bit iovec structures.

This is broken since ddd9e91b [preadv/
pwritev: MIPS: Add preadv(2) and pwritev(2) syscalls.] which originally
added these two syscalls.  I walked through piles of code, including
libc and couldn't find anything that would have worked around the issue
so this change the API to what it should always have been.

Noticed and patch suggested by Al Viro.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>