- 03 Aug, 2014 12 commits
-
-
YoungJun Cho authored
To support MIPI command mode based I80 interface panel, FIMD should do followings: - Sets LCD I80 interface timings configuration. - Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration. - Sets LCD block configuration for I80 interface. - Sets ideal(pixel) clock is 2 times faster than the original one to generate frame done IRQ prior to the next TE signal. - Implements trigger feature that transfers image data if there is page flip request, and implements TE handler to call trigger function. Signed-off-by:
YoungJun Cho <yj44.cho@samsung.com> Acked-by:
Inki Dae <inki.dae@samsung.com> Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
YoungJun Cho authored
This is a temporary solution and should be made by more generic way. To support LCD I80 interface, the DSI host should register TE interrupt handler from the TE GPIO of attached panel. So the panel generates a tearing effect synchronization signal then the DSI host calls the CRTC device manager to trigger to transfer video image. Signed-off-by:
-
YoungJun Cho authored
To support LCD I80 interface, the panel should generate Tearing Effect synchronization signal between MCU and FB to display video images. And the display controller should trigger to transfer video image at this signal. So the panel receives the TE IRQ, then calls these handler chains to notify it to the display controller. Signed-off-by:
-
YoungJun Cho authored
In case of using MIPI DSI based I80 interface panel, the relevant registers should be set. So this patch adds relevant DT bindings. Signed-off-by:
-
YoungJun Cho authored
There could be the case that the page flip operation isn't finished correctly with some abnormal condition such as panel reset. So this patch replaces wait_event() with wait_event_timeout() to avoid waiting for page flip completion infinitely. And clears exynos_crtc->pending_flip in exynos_drm_crtc_page_flip() when exynos_drm_crtc_mode_set_commit() is failed. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
YoungJun Cho authored
This configuration could be used in MIPI DSI command mode also. And adds user manual description for display configuration. Signed-off-by:
-
Marek Szyprowski authored
Configuration sets for Exynos 4210 and 4x12 SoC were already defined in Exynos HDMI and Mixed drivers, but they lacked proper linking to device tree 'compatible' values. This patch fixes this issue adding support for following compatible values: samsung,exynos4210-mixer, samsung,exynos4212-mixer and samsung,exynos4210-hdmi. It also corrects access to sclk_mixer clock, which is available only on Exynos 4210. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
HDMI_EN regulator is additional regulator for providing voltage source for DCC lines available on HDMI connector. When there is no power provided for DDC epprom, some TV-sets do not pulls up HPD (hot plug detect) line, what causes HDMI block to stay turned off. This patch enables HDMI_EN regulator (if available) on driver probe and keep it enabled all the time to let TV-set correctly signal HPD event. Signed-off-by:
-
Jingoo Han authored
According to the header comment in the source file, the driver is licensed under GPL v2, so update MODULE_LICENSE() to match that. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sachin Kamat authored
'exynos_gem_obj' is not used in the function. Remove it. Signed-off-by:
Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by:
-
Sachin Kamat authored
'frame_size_code' is not used in the function. Remove it. Signed-off-by:
-
Krzysztof Kozlowski authored
Fix a NULL pointer exception when main exynos drm driver was probed successfully but no components were added (e.g. by incomplete DTS). In such case the exynos_drm_load() is never called and drvdata is NULL. The NULL pointer exception may theoretically also happen as a effect of race between adding components and main driver: if suspend of the driver happens before adding components. Trace: [ 1.190295] [drm] Initialized drm 1.1.0 20060810 [ 1.195209] exynos-drm-ipp exynos-drm-ipp: drm ipp registered successfully. (...) [ 24.001743] PM: Syncing filesystems ... done. [ 24.002177] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 24.007403] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.032559] Unable to handle kernel NULL pointer dereference at virtual address 00000134 [ 24.035007] pgd = dedd8000 [ 24.037734] [00000134] *pgd=5ee13831, *pte=00000000, *ppte=00000000 [ 24.043953] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 24.049329] Modules linked in: [ 24.052371] CPU: 0 PID: 1 Comm: sh Not tainted 3.16.0-rc3-00035-geba20bbdde04-dirty #51 [ 24.060354] task: df478000 ti: df480000 task.ti: df480000 [ 24.065743] PC is at mutex_lock+0x10/0x50 [ 24.069733] LR is at drm_modeset_lock_all+0x30/0xbc [ 24.074590] pc : [<c048516c>] lr : [<c02a14b4>] psr: a0000013 [ 24.074590] sp : df481db8 ip : 00000000 fp : c05e524c [ 24.086045] r10: 00000002 r9 : c02c1fe4 r8 : deca5e44 [ 24.091253] r7 : 00000000 r6 : 00000000 r5 : 0000014c r4 : 00000134 [ 24.097763] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000134 [ 24.104275] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 24.111391] Control: 10c53c7d Table: 5edd806a DAC: 00000015 [ 24.117120] Process sh (pid: 1, stack limit = 0xdf480240) [ 24.122502] Stack: (0xdf481db8 to 0xdf482000) [ 24.126843] 1da0: dee01d80 c02a14b4 [ 24.135004] 1dc0: 00000000 00000000 c07aff98 c02aec7c 00000002 00000000 00000000 c07aff98 [ 24.143164] 1de0: deca5e10 c02aecf4 c02aecd4 c02c2010 00000000 c02c9470 00000000 00000000 [ 24.151322] 1e00: 00000000 00000000 deca5e10 deca5e10 00000000 c07aff98 00000002 deca5e44 [ 24.159482] 1e20: c06d8f78 c06fb800 deca5e78 c02ca660 df7baf00 007b0aa0 deca5e10 c06fb7c8 [ 24.167641] 1e40: c07aff98 00000000 00000002 c02cbe18 9757aec5 00000005 9757aec5 00000005 [ 24.175801] 1e60: ded1d380 00000003 00000003 c05c74d8 ded1d380 c07209d4 c05c7514 c07105d8 [ 24.183960] 1e80: 01e2a738 c0068a74 00000000 c05c7514 ded1d380 c071c6e0 00000004 c07105d8 [ 24.192119] 1ea0: 01e2a738 c047f1e0 c0600cc0 df481ec4 00000003 00000000 00000003 c05c74d8 [ 24.200278] 1ec0: ded1d380 c071c6e0 c05c7514 c07105d8 01e2a738 c0069444 c06d905c 00000003 [ 24.208438] 1ee0: 00000003 ded1d380 c06d9064 00000004 c05c3fc0 c0067d4c df535ab0 ded1d380 [ 24.216596] 1f00: df481f80 ded1d380 00000004 ded1d1cc ded1d1c0 c0221724 00000004 c016ca6c [ 24.224756] 1f20: c016ca28 00000000 00000000 c016c1d4 00000000 00000000 b6f37000 df481f80 [ 24.232915] 1f40: decedd80 00000004 df480000 df480000 b6f37000 c0110920 df47839c 60000013 [ 24.241074] 1f60: 00000000 00000000 decedd80 decedd80 00000004 df480000 b6f37000 c0110da8 [ 24.249233] 1f80: 00000000 00000000 00000004 b6edf5d8 00000004 b6f37000 00000004 c000f2a8 [ 24.257393] 1fa0: 00001000 c000f0e0 b6edf5d8 00000004 00000001 b6f37000 00000004 00000000 [ 24.265551] 1fc0: b6edf5d8 00000004 b6f37000 00000004 00000004 00000001 00000000 01e2a738 [ 24.273711] 1fe0: 00000000 beba0a20 b6e1f4f0 b6e7022c 60000010 00000001 ffffffff ffffffff [ 24.281885] [<c048516c>] (mutex_lock) from [<c02a14b4>] (drm_modeset_lock_all+0x30/0xbc) [ 24.289950] [<c02a14b4>] (drm_modeset_lock_all) from [<c02aec7c>] (exynos_drm_suspend+0xc/0x64) [ 24.298627] [<c02aec7c>] (exynos_drm_suspend) from [<c02aecf4>] (exynos_drm_sys_suspend+0x20/0x34) [ 24.307568] [<c02aecf4>] (exynos_drm_sys_suspend) from [<c02c2010>] (platform_pm_suspend+0x2c/0x54) [ 24.316597] [<c02c2010>] (platform_pm_suspend) from [<c02c9470>] (dpm_run_callback+0x48/0x170) [ 24.325188] [<c02c9470>] (dpm_run_callback) from [<c02ca660>] (__device_suspend+0x128/0x39c) [ 24.333606] [<c02ca660>] (__device_suspend) from [<c02cbe18>] (dpm_suspend+0x5c/0x314) [ 24.341506] [<c02cbe18>] (dpm_suspend) from [<c0068a74>] (suspend_devices_and_enter+0x8c/0x598) [ 24.350185] [<c0068a74>] (suspend_devices_and_enter) from [<c0069444>] (pm_suspend+0x4c4/0x5d0) [ 24.358862] [<c0069444>] (pm_suspend) from [<c0067d4c>] (state_store+0x70/0xd4) [ 24.366156] [<c0067d4c>] (state_store) from [<c0221724>] (kobj_attr_store+0x14/0x20) [ 24.373885] [<c0221724>] (kobj_attr_store) from [<c016ca6c>] (sysfs_kf_write+0x44/0x48) [ 24.381867] [<c016ca6c>] (sysfs_kf_write) from [<c016c1d4>] (kernfs_fop_write+0xc0/0x17c) [ 24.390027] [<c016c1d4>] (kernfs_fop_write) from [<c0110920>] (vfs_write+0xa0/0x1c4) [ 24.397750] [<c0110920>] (vfs_write) from [<c0110da8>] (SyS_write+0x40/0x8c) [ 24.404782] [<c0110da8>] (SyS_write) from [<c000f0e0>] (ret_fast_syscall+0x0/0x3c) [ 24.412332] Code: e92d4010 e1a04000 f57ff05b f590f000 (e1903f9f) [ 24.418448] ---[ end trace cfa06690eabe8dd5 ]--- [ 24.423032] Kernel panic - not syncing: Fatal exception [ 24.428220] CPU1: stopping [ 24.430905] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc3-00035-geba20bbdde04-dirty #51 [ 24.440549] [<c0016440>] (unwind_backtrace) from [<c001294c>] (show_stack+0x10/0x14) [ 24.448269] [<c001294c>] (show_stack) from [<c04811e8>] (dump_stack+0x80/0xcc) [ 24.455472] [<c04811e8>] (dump_stack) from [<c001495c>] (handle_IPI+0x130/0x15c) [ 24.462850] [<c001495c>] (handle_IPI) from [<c000862c>] (gic_handle_irq+0x60/0x68) [ 24.470400] [<c000862c>] (gic_handle_irq) from [<c0013440>] (__irq_svc+0x40/0x70) [ 24.477860] Exception stack(0xdf4bdf88 to 0xdf4bdfd0) [ 24.482898] df80: ffffffed 00000000 00000000 00000000 df4bc000 c06d042c [ 24.491058] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0 [ 24.499214] dfc0: c0010324 c0010328 60000013 ffffffff [ 24.504254] [<c0013440>] (__irq_svc) from [<c0010328>] (arch_cpu_idle+0x28/0x30) [ 24.511634] [<c0010328>] (arch_cpu_idle) from [<c005f110>] (cpu_startup_entry+0x2c4/0x3f0) [ 24.519878] [<c005f110>] (cpu_startup_entry) from [<400086c4>] (0x400086c4) [ 24.526821] ---[ end Kernel panic - not syncing: Fatal exception Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
- 01 Aug, 2014 4 commits
-
-
Mathias Krause authored
The VFS layer handles those in the very same way, if unset. No need for additional stubs. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
David Herrmann authored
Linux doesn't run on i386, anymore. See: commit d55c5a93 Author: H. Peter Anvin <hpa@linux.intel.com> Date: Wed Nov 28 11:50:24 2012 -0800 x86, 386 removal: Remove CONFIG_CMPXCHG All 486+ CPUs support CMPXCHG, so remove the fallback 386 support code. Furthermore, as the commit-message states, all 486+ CPUs support the CMPXCHG instruction and thus even legacy DRM can run fine. Drop the now superfluous "x86 == 3" check. Signed-off-by:David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
David Herrmann authored
This object is unused, drop it. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
David Herrmann authored
This object is not used except for static fields in drm_bufs *cough*. Inline the watermark fields and drop the unused structure definition. Signed-off-by:
-
- 30 Jul, 2014 1 commit
-
-
Laurent Pinchart authored
The maximum pitch constraint for the hardware is expressed in pixels. Convert it to bytes to validate frame buffer creation, as frame buffer pitches are expressed in bytes. Reported-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
- 24 Jul, 2014 2 commits
-
-
Dave Airlie authored
This chunk was no longer required from what I can see, or at least it is doing the wrong thing, as I confused intel_connector->encoder and connector->encoder. Drop it for now, to remove the warnings at bootup. Signed-off-by: -
Dave Airlie authored
When I moved the irq disable down to after display disable, I didn't realise the gt suspend also required irqs off, so move it down as well. Fixes WARNs seen at suspend/resume time. v2: moved the rps flush down as well. Tested-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
- 23 Jul, 2014 2 commits
-
-
git://ftp.arm.linux.org.uk/~rmk/linux-armDave Airlie authored
pull the msm patch in. * 'component-for-drm' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm: msm: update to use component match support
-
git://ftp.arm.linux.org.uk/~rmk/linux-armDave Airlie authored
Merge armada changes, I've confirmed the componenet changes are same as in Greg's tree. * 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: drm/armada: register crtc with port drm/armada: permit CRTCs to be registered as separate devices dt-bindings: add Marvell Dove LCD controller documentation drm/armada: update Armada 510 (Dove) to use "ext_ref_clk1" as the clock drm/armada: convert to componentized support drm: add of_graph endpoint helper to find possible CRTCs component: fix bug with legacy API drm/armada: make variant a CRTC thing drm/armada: move variant initialisation to CRTC init drm/armada: use number of CRTCs registered drm/armada: move IRQ handling into CRTC component: add support for component match array component: ignore multiple additions of the same component component: fix missed cleanup in case of devres failure
-
- 22 Jul, 2014 15 commits
-
-
Chris Wilson authored
Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Dave Airlie authored
fixes sparse warning, and removes potentially dangerous name from namespace. Signed-off-by: -
Dave Airlie authored
fixes sparse warning. Signed-off-by: -
Russell King authored
Regular randconfig nightly testing has detected problems with omapdrm. omapdrm fails to build when the kernel is built to support 64-bit DMA addresses and/or 64-bit physical addresses due to an assumption about the width of these types. Use %pad to print DMA addresses, rather than %x or %Zx (which is even more wrong than %x). Avoid passing a uint32_t pointer into a function which expects dma_addr_t pointer. drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply': drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1 drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr': drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe': drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format] drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init': drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format] make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1 drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append': drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror] make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1 make[5]: Target `__build' not remade because of errors. make[4]: *** [drivers/gpu/drm/omapdrm] Error 2 Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King authored
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/bochs/bochs_drv.c:100:12: warning: 'bochs_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/bochs/bochs_drv.c:117:12: warning: 'bochs_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by:
-
Russell King authored
Regular nightly randconfig build testing discovered these warnings: drivers/gpu/drm/cirrus/cirrus_drv.c:79:12: warning: 'cirrus_pm_suspend' defined but not used [-Wunused-function] drivers/gpu/drm/cirrus/cirrus_drv.c:96:12: warning: 'cirrus_pm_resume' defined but not used [-Wunused-function] Fix these by adding the same condition that SET_SYSTEM_SLEEP_PM_OPS() uses. Signed-off-by:
-
Russell King authored
drivers/gpu/drm/shmobile/shmob_drm_drv.c:300:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef] Always use #ifdef with CONFIG symbols, never just bare #if Signed-off-by:
-
Russell King authored
drivers/gpu/drm/rcar-du/rcar_du_drv.c:190:5: warning: "CONFIG_PM_SLEEP" is not defined [-Wundef] Always use #ifdef with CONFIG symbols, never just bare #if Signed-off-by:
-
Jean-Francois Moine authored
In tda998x_encoder_destroy(), priv->cec is never NULL, so, remove its test. Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Dave Airlie authored
Merge branch 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux into drm-next Evil super powers maintainer abuse, get i915 mst support into -next. * 'drm-i915-mst-support-next' of git://people.freedesktop.org/~airlied/linux: drm/i915: mst topology dumper in debugfs (v0.2) drm/i915: add DP 1.2 MST support (v0.7) drm/i915: split conversion function out into separate function drm/i915: check connector->encoder before using it. i915: split some DP modesetting code into a separate function drm/i915: add some registers need for displayport MST support.
-
Dave Airlie authored
use the mst helper code to dump the topology in debugfs. v0.2: drop is_mst check - as we want to dump other info Reviewed-by:
Todd Previte <tprevite@gmail.com> Signed-off-by:
-
Dave Airlie authored
This adds DP 1.2 MST support on Haswell systems. Notes: a) this reworks irq handling for DP MST ports, so that we can avoid the mode config locking in the current hpd handlers, as we need to process up/down msgs at a better time. Changes since v0.1: use PORT_PCH_HOTPLUG to detect short vs long pulses add a workqueue to deal with digital events as they can get blocked on the main workqueue beyong mode_config mutex fix a bunch of modeset checker warnings acks irqs in the driver cleanup the MST encoders Changes since v0.2: check irq status again in work handler move around bring up and tear down to fix DPMS on/off use path properties. Changes since v0.3: updates for mst apis more state checker fixes irq handling improvements fbcon handling support improved reference counting of link - fixes redocking. Changes since v0.4: handle gpu reset hpd reinit without oopsing check link status on HPD irqs fix suspend/resume Changes since v0.5: use proper functions to get max link/lane counts fix another checker backtrace - due to connectors disappearing. set output type in more places fro, unknown->displayport don't talk to devices if no HPD asserted check mst on short irqs only check link status properly rebase onto prepping irq changes. drop unsued force_act Changes since v0.6: cleanup unused struct entry. [airlied: fix some sparse warnings]. Reviewed-by:
-
Thierry Reding authored
sparse complains about these functions missing a prototype, but looking closer they aren't (and likely not supposed to be) used outside of this source file, so they can be made static. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Thierry Reding authored
The final parameter to ttm_bo_reserve() is a pointer, therefore callers should use NULL instead of 0. Fixes a bunch of sparse warnings of this type: warning: Using plain integer as NULL pointer Signed-off-by:
-
Thierry Reding authored
The drm_copy_field() function copies strings into userspace buffers, so the first parameter needs to have a __user annotation to avoid warnings from the sparse checker. Signed-off-by:
-
- 21 Jul, 2014 4 commits
-
-
Dave Airlie authored
for MST I need to reuse this, so just move it now. Signed-off-by: -
Dave Airlie authored
DP MST will need connectors that aren't connected to specific encoders, add some checks in advance to avoid oopses. Reviewed-by:
-
Dave Airlie authored
this is just prep work for mst support. Reviewed-by:
-
Dave Airlie authored
These are just from the Haswell spec. Reviewed-by:
-
