add some elements below:
 - num_aid
 - aid_id for each sdma instance
 - num_inst_per_aid for sdma

and extend macro size below:
 - SDMA_MAX_INSTANCES to 16
 - AMDGPU_MAX_RINGS to 96
 - AMDGPU_MAX_HWIP_RINGS to 32

v2: move aid_id from amdgpu_ring to amdgpu_sdma_instance. (Lijo)
Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Previously for vega10, the sdma_doorbell_range is only enough for sdma
gfx queue, thus the index on second doorbell page is allocated for sdma
page queue. From vega20, the sdma_doorbell_range on 1st page is enlarged.
Therefore, just leverage these index instead of allocation on 2nd page.

v2: change "(x << 1) + 2" to "(x + 1) << 1" for readability and add comments.
Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set RETRY_PERMISSION_OR_INVALID_PAGE_FAULT bit in VM_CONTEXT1_CNTL
as well so XNACK can be enabled in the SQ per process.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the new atomfirmware initialization logic for GC 9.4.3 based ASICs
also. ASIC init logic doesn't consider boot clocks during init.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Recently introduced commit "drm/amdgpu: Set cache coherency
for GC 9.4.3" did not update the settings applicable for svm ranges.
Add the coherence settings for svm ranges for GFX IP 9.4.3.
Reviewed-by: Amber Lin <amber.lin@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, in CPX mode, the CP_HYP_XCP_CTL register is programmed
incorrectly with the number of XCCs in the partition. As a result,
HIQ doesn't work in CPX mode. Fix this by programming the correct
number of XCCs in a partition, which is 1, in CPX mode.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch updates SDMA queue management for multi XCC in GFX9.4.3.
- Allocate/deallocate SDMA queues from the correct SDMA engines
  based on the partition mode.
- Updates the kgd2kfd interface to fetch the correct SDMA register
  addresses.
- It also fixes dumping correct SDMA queue info in debugfs.

v2: squash in fix "drm/amdkfd: Fix XGMI SDMA user-mode queue allocation"
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update simd_count and array_count node properties to report
values multiplied by number of XCCs in the partition.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

During DQM tear down, call DQM stop to unitialize HIQ and
associated memory allocated during packet manager init.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix VM fault reporting and clear VM fault register
for XCC1.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Context save handling needs to be updated for a multi XCC
setup:
- On a multi XCC setup, KFD needs to report context save base
  address and size for each XCC in MQD.
- Thunk will allocate a large context save area covering all
  XCCs which will be equal to: num_of_xccs in a partition * size
  of context save area for 1 XCC. However, it will report only the
  size of context save area for 1 XCC only in the ioctl call.
- Driver then setups the MQD correctly using the size passed from
  Thunk and information about number of XCCs in a partition.
- Update get_wave_state function to return context save area
  for all XCCs in the partition.

v2: update the get_wave_state function for mqd manager v11 (Morris)
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add XCC instance to select the correct KIQ ring when
flushing TLBs on a multi-XCC setup.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Gfx 9 starts to have multiple XCC instances in one device. Add instance
parameter to kgd2kfd functions where XCC instance was hard coded as 0.
Also, update code to pass the correct instance number when running
on a multi-XCC setup.

v2: introduce the XCC instance to gfx v11 (Morris)
v3: rebase (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In a device that supports multiple XCCs, unlike AQL queues, the PM4 queue
will be only processed in one XCC in the partitioning. This patch
re-purposes the queue percentage variable in create queue and update
queue ioctl for the user space to specify the target XCC.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update MQD management for both HIQ and user-mode compute
queues on a multi XCC setup. MQDs needs to be allocated,
initialized, loaded and destroyed for each XCC in the KFD
node.

v2: squash in fix "drm/amdkfd: Fix SDMA+HIQ HQD allocation on GFX9.4.3"
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch introduces multi-partition support in KFD.
This patch includes:
- Support for maximum 8 spatial partitions in KFD.
- Initialize one HIQ per partition.
- Management of VMID range depending on partition mode.
- Management of doorbell aperture space between all
  partitions.
- Each partition does its own queue management, interrupt
  handling, SMI event reporting.
- IOMMU, if enabled with multiple partitions, will only work
  on first partition.
- SPM is only supported on the first partition.
- Currently, there is no support for resetting individual
  partitions. All partitions will reset together.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Introduce a new structure, kfd_node, which will now represent
a compute node. kfd_node is carved out of kfd_dev structure.
kfd_dev struct now will become the parent of kfd_node, and will
store common resources such as doorbells, GTT sub-alloctor etc.
kfd_node struct will store all resources specific to a compute
node, such as device queue manager, interrupt handling etc.

This is the first step in adding compute partition support in KFD.

v2: introduce kfd_node struct to gc v11 (Hawking)
v3: make reference to kfd_dev struct through kfd_node (Morris)
v4: use kfd_node instead for kfd isr/mqd functions (Morris)
v5: rebase (Alex)
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Mode2 reset for v13.0.6 has similar workflow as v13.0.2
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add additional XCC programming sequences.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A new field nodeid in interrupt cookie indicates the node ID.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With the mec FW update to utilize the mqd base set by
driver for kcq mapping, slave kcq ring test and IB test
can be re-enabled.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Each xcc has its own sratch_reg offset
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Should use vcn_ring0_1 instead of doorbell index to
set nbio doorbell range.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable jpeg doorbell for jpeg4.0.3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn doorbell for vcn4.0.3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VCN4.0.3 used up to 16 doorbells per partition.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set F8_MODE for GC 9.4.3 as optimal/non-IEEE. Also update gc_v9_0
to gc_v9_4_3 to include more definitions such as the F8_MODE bit, and
remove unused header files.

v2: fix IP version check (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add multiple jpeg rings support for vcn4_0_3
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add multiple jpeg rings support.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn DPG mode for VCN4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn pg for VCN4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable vcn cg for VCN4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable jpeg pg for VCN4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable jpeg cg for VCN4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add vcn support for VCN4_0_3.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add jpeg support for VCN4_0_3.

v2: squash in delayed work typo fix (Alex)
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add VCN4_0_3 firmware.

v2: fix fw name (Alex)
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add vcn v4_0_3 register offset adn shift masks
header files

v2: update headers (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add more macro to support offset variant and
simplify macro SOC15_WAIT_ON_RREG.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use SOC15 API so that the register offset is calculated correctly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>