- 30 Oct, 2011 36 commits
-
-
Christian Borntraeger authored
Linux on System z uses a ballooner based on diagnose 0x10. (aka as collaborative memory management). This patch implements diagnose 0x10 on the guest address space. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Carsten Otte authored
gmap_fault needs to walk the guest page table. However, parts of that may change if some other thread does munmap. In that case gmap_unmap_notifier will also unmap the corresponding parts from the guest page table. We need to take mmap_sem in order to serialize these operations. do_exception now calls __gmap_fault with mmap_sem held which does not get exported to modules. The exported function, which is called from KVM, now takes mmap_sem. Reported-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Carsten Otte authored
This introduces locking via mm->page_table_lock to protect the rmap list for guest mappings from being corrupted by concurrent operations. Signed-off-by:
-
Carsten Otte authored
Fix possible deadlock reported by lockdep: qemu-system-s39/2963 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: gmap_alloc_table+0x9c/0x120 but task is already holding lock: (&mm->mmap_sem){++++++}, at: gmap_map_segment+0xa6/0x27c Actually gmap_alloc_table is the only called in gmap_map_segment with mmap_sem held, thus it's safe to simply remove the inner lock. Signed-off-by: -
Carsten Otte authored
On sie_fault we need to switch back to user ASCE. Otherwise we get interresting effects when exiting to "userspace" while the guest space is still active. Signed-off-by:
-
Martin Schwidefsky authored
Use a sigp sense running to decide which signal processor order to use for an ipi. If the target cpu is running use external call, if the target cpu is not running use emergency signal. Signed-off-by: -
Stefan Haberland authored
The buffer for read configuration data has to be initialized with an EBCDIC string to show support for extended UIDs to z/VM. If this read configuration data CQR needs to be retried, the buffer may have changed in between. So re-initialize the buffer to get a correct extended UID under z/VM. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
After terminating a request in the dasd_sleep_on_immediatly function, wait for the clear interrupt to be received before starting the new request. This prevents the requests from getting mixed up. Signed-off-by:
-
Heiko Carstens authored
Add missing module.h include to prevent build breakage after the module.h split work hits Linus' tree. Signed-off-by:
-
Sebastian Ott authored
Add support for CHSC I/O interrupt statistics in /proc/interrupts. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Fix coding style, remove forward declerations, simplify code. Also remove a superfluous get_device/put_device pair in ccwgroup_create_from_string. Signed-off-by:
-
Sebastian Ott authored
Put sysfs attributes of ccwgroup devices in an attribute group to ensure that these attributes are actually present when userspace is notified via uevents. Cc: stable@kernel.org Signed-off-by:
-
Martin Schwidefsky authored
The user space program can change its addressing mode between the 24-bit, 31-bit and the 64-bit mode if the kernel is 64 bit. Currently the kernel always forces the standard amode on signal delivery and signal return and on ptrace: 64-bit for a 64-bit process, 31-bit for a compat process and 31-bit kernels. Change the signal and ptrace code to allow the full range of addressing modes. Signal handlers are run in the standard addressing mode for the process. One caveat is that even an 31-bit compat process can switch to the 64-bit mode. The next signal will switch back into the 31-bit mode and there is no room in the 31-bit compat signal frame to store the information that the program came from the 64-bit mode. Signed-off-by: -
Martin Schwidefsky authored
Split out addressing mode bits from PSW_BASE_BITS, rename PSW_BASE_BITS to PSW_MASK_BASE, get rid of psw_user32_bits, remove unused function enabled_wait(), introduce PSW_MASK_USER, and drop PSW_MASK_MERGE macros. Change psw_kernel_bits / psw_user_bits to contain only the bits that are always set in the respective mode. Signed-off-by: -
Martin Schwidefsky authored
Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: -
Martin Schwidefsky authored
An instruction with an address right below the adress limit for the current addressing mode will wrap. The instruction restart logic in the protection fault handler and the signal code need to follow the wrapping rules to find the correct instruction address. Signed-off-by: -
Martin Schwidefsky authored
For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: -
Hendrik Brueckner authored
Switching on the DEVTMPFS kernel option helpes to maintain a /dev file system early in the boot process, especially, in limited environments. Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
Remove the save_area_64 field from the 0xe00 - 0xf00 area in the lowcore. Use a free slot in the save_area array instead. Signed-off-by: -
Michael Holzheu authored
This patch implements the crash_map_pages() function for s390. KEXEC_CRASH_MEM_ALIGN is set to HPAGE_SIZE, in order to support kernel mappings that use large pages. We also use HPAGE_SIZE alignment for CONFIG_HUGETLB_PAGE=n in order to have the same 1 MiB alignment on all s390 systems. Signed-off-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Michael Holzheu authored
This patch introduces a mechanism that allows architecture backends to remove page tables for the crashkernel memory. This can protect the loaded kdump kernel from being overwritten by broken kernel code. Two new functions crash_map_reserved_pages() and crash_unmap_reserved_pages() are added that can be implemented by architecture code. The crash_map_reserved_pages() function is called before and crash_unmap_reserved_pages() after the crashkernel segments are loaded. The functions are also called in crash_shrink_memory() to create/remove page tables when the crashkernel memory size is reduced. To support architectures that have large pages this patch also introduces a new define KEXEC_CRASH_MEM_ALIGN. The crashkernel start and size must always be aligned with KEXEC_CRASH_MEM_ALIGN. Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Michael Holzheu authored
This patch defines for s390 an ABI defined pointer to the vmcoreinfo note at a well known address. With this patch tools are able to find this information in dumps created by stand-alone or hypervisor dump tools. Signed-off-by:
-
Michael Holzheu authored
Currently the vmcoreinfo note is only initialized in case of kdump. On s390 it is possible to create kernel dumps with other dump mechanisms than kdump (e.g. via hypervisor dump or stand-alone dump tools). For those dumps it would also be desirable to include the vmcoreinfo data. To accomplish this, with this patch the vmcoreinfo ELF note is always initialized, not only in case of a (kdump) crash. On s390 we will add an ABI defined pointer at a well known address to vmcoreinfo so that dump analysis tools are able to find this information. In particular on s390 we have a tool named zgetdump. With this tool it is possible to convert dump formats on the fly using fuse. E.g. you can mount a s390 stand-alone dump as ELF dump. When this is done, the tool finds the vmcoreinfo in the stand-alone dump via the well known ABI defined address and it creates the respective VMCOREINFO ELF note in the output ELF dump. This then can be used e.g. by makedumpfile for dump filtering. No more need for a vmlinux file with debug information. So this will look like the following: $ zgetdump --mount standalone.dump -f elf /mnt $ ls /mnt dump.elf $ readelf -n /mnt/dump.elf $ ... VMCOREINFO 0x00000474 Unknown note type: (0x00000000) $ makedumpfile -c -d 31 /mnt/dump.elf dump.kdump Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by:
-
Michael Holzheu authored
This patch provides the architecture specific part of the s390 kdump support. Signed-off-by:
-
Michael Holzheu authored
Add access function for real memory needed by s390 kdump backend. Signed-off-by:
-
Michael Holzheu authored
PSW restart can be triggered on offline CPUs. If this happens, currently the PSW restart code fails, because functions like smp_processor_id() do not work on offline CPUs. This patch fixes this as follows: If PSW restart is triggered on an offline CPU, the PSW restart (sigp restart) is done a second time on another CPU that is online and the old CPU is stopped afterwards. Signed-off-by:
-
Michael Holzheu authored
Currently only the address of the pre-allocated ELF header is passed with the elfcorehdr= kernel parameter. In order to reserve memory for the header in the 2nd kernel also the size is required. Current kdump architecture backends use different methods to do that, e.g. x86 uses the memmap= kernel parameter. On s390 there is no easy way to transfer this information. Therefore the elfcorehdr kernel parameter is extended to also pass the size. This now can also be used as standard mechanism by all future kdump architecture backends. The syntax of the kernel parameter is extended as follows: elfcorehdr=[size[KMG]@]offset[KMG] This change is backward compatible because elfcorehdr=size is still allowed. Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Michael Holzheu authored
On s390 there is a different KEXEC_CONTROL_MEMORY_LIMIT for the normal and the kdump kexec case. Therefore this patch introduces a new macro KEXEC_CRASH_CONTROL_MEMORY_LIMIT. This is set to KEXEC_CONTROL_MEMORY_LIMIT for all architectures that do not define KEXEC_CRASH_CONTROL_MEMORY_LIMIT. Acked-by:
-
Tejun Heo authored
_TIF_SINGLE_STEP is incorrectly defined as 1<<TIF_FREEZE. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Sebastian Ott authored
Print a message in case we do not receive an IRQ in time (for internal I/O). Also print the ID of the last used channel path, since it is possible that not the device itself but this specific path might have a defect. Signed-off-by:
-
Jan Glauber authored
Use the ENTRY macro for the system call wrapper sys_setns_wrapper similarly to the other wrappers. Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
The rcu page table free code uses a couple of bits in the page table pointer passed to tlb_remove_table to discern the different page table types. __tlb_remove_table extracts the type with an incorrect mask which leads to memory leaks. The correct mask is ((FRAG_MASK << 4) | FRAG_MASK). Cc: stable@kernel.org Signed-off-by: -
Martin Schwidefsky authored
git commit 5e9a2692 "[S390] ptrace cleanup" introduced a regression for the case when both a user PER set (e.g. a storage alteration trace) and PTRACE_SINGLESTEP are active. The new code will overrule the user PER set with a instruction-fetch PER set over the whole address space for ptrace single stepping. The inferior process will be stopped after each instruction with an instruction fetch event. Any other events that may have occurred concurrently are not reported (e.g. storage alteration event) because the control bits for them are not set. The solution is to merge the PER control bits of the user PER set with the PER_EVENT_IFETCH control bit for PTRACE_SINGLESTEP. Cc: stable@kernel.org Signed-off-by:
-
Sebastian Ott authored
Fix this warning: WARNING: vmlinux.o(.text+0x199b6): Section mismatch in reference from the function alloc_masks() to the function .init.text:__alloc_bootmem() Signed-off-by:
-
Martin Schwidefsky authored
The .start function and indirectly the .next function of the show_cpuinfo sequential operation uses NR_CPUS as limit instead of nr_cpu_ids. This can cause warnings like this: WARNING: at /usr/src/linux/include/linux/cpumask.h:107 Process lscpu (pid: 575, task: 000000007deb4338, ksp: 000000007794f588) Krnl PSW : 0704000180000000 0000000000106db4 (show_cpuinfo+0x108/0x234) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000003 0000000000791988 000000000071b478 0000000000000004 0000000000000001 0000000000000000 000000007d139500 0000000000000400 0000000000000000 000000000070e24c 000000007d48d600 0000000000000005 000000007d48d600 00000000004dfa10 0000000000106cf8 000000007794fcc0 Krnl Code: 0000000000106da8: 95001000 cli 0(%r1),0 0000000000106dac: a774ffac brc 7,106d04 0000000000106db0: a7f40001 brc 15,106db2 >0000000000106db4: 92011000 mvi 0(%r1),1 0000000000106db8: a7f4ffa6 brc 15,106d04 0000000000106dbc: c0e5000065b4 brasl %r14,113924 0000000000106dc2: c09000303a45 larl %r9,70e24c 0000000000106dc8: c020001eefd4 larl %r2,4e4d70 Replacing NR_CPUS with nr_cpu_ids fixes it. Signed-off-by: -
Peter Oberparleiter authored
Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by:Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
-
- 29 Oct, 2011 4 commits
-
-
git://github.com/rustyrussell/linuxLinus Torvalds authored
* git://github.com/rustyrussell/linux: lguest: move process freezing before pending signals check lguest: don't allow KVM-detection cpuid. lguest: Allow running under paravirt-enabled KVM.
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: ARM: mark empty gpio.h files empty gpio: Fix ARM versatile-express build failure of: include errno.h
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: drivercore: Add helper macro for platform_driver boilerplate spi: irq: Remove IRQF_DISABLED OMAP: SPI: Fix the trying to free nonexistent resource error spi/spi-ep93xx: add module.h include spi/tegra: fix compilation error in spi-tegra.c spi: spi-dw: fix all sparse warnings spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate spi/spi-pl022: Don't allocate more sg than required. spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet spi/spi-pl022: Resolve formatting issues
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: h8300: Move gpio.h to gpio-internal.h gpio: pl061: add DT binding support gpio: fix build error in include/asm-generic/gpio.h gpiolib: Ensure struct gpio is always defined irq: Add EXPORT_SYMBOL_GPL to function of irq generic-chip gpio-ml-ioh: Use NUMA_NO_NODE not GFP_KERNEL gpio-pch: Use NUMA_NO_NODE not GFP_KERNEL gpio: langwell: ensure alternate function is cleared gpio-pch: Support interrupt function gpio-pch: Save register value in suspend() gpio-pch: modify gpio_nums and mask gpio-pch: support ML7223 IOH n-Bus gpio-pch: add spinlock in suspend/resume processing gpio-pch: Delete invalid "restore" code in suspend() gpio-ml-ioh: Fix suspend/resume issue gpio-ml-ioh: Support interrupt function gpio-ml-ioh: Delete unnecessary code gpio/mxc: add chained_irq_enter/exit() to mx3_gpio_irq_handler() gpio/nomadik: use genirq core to track enablement gpio/nomadik: disable clocks when unused
-
