The parisc ports may use both the lasi700 and sim710 versions of this driver
Unfortunately, one must be memory mapped, and one must be IO mapped, so
add code to the driver for this case

while trying to access a disk drive via an FCP bridge we got an FCP_RSP IU
with the RSP_CODE field set to "FCP_CMND Fields Invalid". This happened
after sending a START_STOP command to the device. Reason for this was that
the FCP_CMND IU incorrectly had the RDDATA field set to one, because of a
bug in sd_spinup_disk(). There the data direction for START_STOP is set
to SCSI_DATA_READ instead of SCSI_DATA_NONE.
Please apply the patch below.

Thanks,
Heiko

The attached patch fixes the compile errors in inia100.c described in
Bugzilla bug #345 at http://bugme.osdl.org/show_bug.cgi?id=345. It was
built against 2.5.71. I do not have the hardware, so I have only
verified that it compiles correctly.

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

Propagate do_settimeofday() change into osf_settimeofday().

Ivan.

into kanga.twiddle.net:/home/rth/work/linux/axp-2.5

- 2.4 resync
  - incorrect size usage in pci_unmap_single();
  - s/ETH_P_IP/hdlc_type_trans()/
- inccorect debug message in dscc4_clock_setting();
- split of TO_STATE() into TO_STATE_{RX/TX} for documentation purpose.

into kernel.bkbits.net:/home/davem/net-2.5

into nuts.ninka.net:/home/davem/src/BK/net-2.5

into kernel.bkbits.net:/home/davem/sparc-2.5

into nuts.ninka.net:/home/davem/src/BK/net-2.5

into nuts.ninka.net:/home/davem/src/BK/net-2.5

Lots of small fixes and I merged the PCI subsystem with i386 again
because it was mostly identical. This makes the patch quite big,
but it only removes files.

 - Merge PCI subsystem with i386.

   This changes the initialization order of PCI and IOMMU slightly.  It
   didn't see any problems yet, but it could cause some in theory.  It
   re-adds some code that used to be removed, but it's only small stuff
   and it should hopefully cause less mainteance overhead longer term.

 - Fix warnings
 - Merge cpuid.c with i386.c
 - Sync msr.c with i386
 - Consolidate externs in asm/proto.h
 - sysfs/sysdev fixes for apic/nmi (Bryan O'Sullivan)
 - Fix /proc/kcore access
 - Add real kern_addr_valid (used for above).
 - Support consistent dma_mask in IOMMU
 - Fix double print of AMD for CPU model.
 - Remove unused wakeup.S file.
 - Remove obsolete CONFIG_SIMNOW ifdef.
 - Support ptrace access for 32bit vsyscalls.
 - Fix warnings in 32bit boot code compilation.

Handle both unsigned int and unsigned long in rtc_read. This helps
when running 32bit userland under an 64bit kernel.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

1) More reasonable ip_rt_gc_min_interval default
2) Trim less valuable entries in hash chain during
   rt_intern_hash when such chains grow too long.

into nuts.ninka.net:/home/davem/src/BK/net-2.5

1) We export __check_region, so making it __deprecated gives a spurious
   warning in kernel/ksyms.c.
2) Other warnings refer to __check_region rather than check_region,
   which has confused some people.

Make check_region an inline, not a macro, and deprecate *that*.

A number of small ColdFire serial driver fixups:
 - use correct irq handler return type (irqreturn_t)
 - add support for mark and space parity
 - some casting to keep types clean (and remove compile warnings)
 - fix missing ";" after local tty_driver struct definition

We no longer use sub-architecture speicific interrupt setups
in the m68knommu branch. Remove obsolete call to 68328 irq
init.

Make the ROMfs copy in the startup code for Motorola/M5206eLITE board
conditional on actually using a ROMfs setup.

Minor board name change in m68knommu setup,
"Dragon Engine" -> "DragonEngine".

The NCP ioctls are declared unconditionally in compat_ioctl now, which needs this
include to still compile on x86-64.

The us->ns conversion must be in the "tv" if branch of settimeofday,
not in the "tz" if.

Also make it compile for x86-64 again. The 32bit emulation was forgotten
in the conversion.

This moves the initialization of the struct scsi_device fields
use_10_for_ms and use_10_for_rw into a central place.  This allows the
host's slave_configure() function to change them (with effect).  This
also collapses two identical sections of code into a single one.

This is needed by usb-storage, so we can resolve some Babble problems,
some device-crashing problems, and remove a great deal of troublesome
mode-sense-translation code.

This update covers a lot of changes to arch/parisc and parisc-specific
drivers.

 - irq_return_t changes
 - more work on the module loader (James Bottomley)
 - rewrite of led.c by Helge Deller
 - many miscellaneous updates

At least gcc 3.3 complains about this incorrect token pasting thing in
the ASSERT macro of drivers/net/irda/ma600.c