1. 26 Oct, 2012 1 commit
  2. 25 Oct, 2012 11 commits
  3. 24 Oct, 2012 10 commits
  4. 22 Oct, 2012 6 commits
    • Kevin Hilman's avatar
      ARM: OMAP3: Beagle: fix OPP customization and initcall ordering · 65bf7ca0
      Kevin Hilman authored
      After commit 24d7b40a (ARM: OMAP2+:
      PM: MPU DVFS: use generic CPU device for MPU-SS), OPPs are registered
      using an existing CPU device, not the omap_device for MPU-SS.
      
      First, fix the board file to use get_cpu_device() as required by the
      above commit, otherwise custom OPPs will be added to the wrong device.
      
      Second, the board files OPP init is called from the its init_machine
      method, and the generic CPU devices are not yet created when
      init_machine is run.  Therefore OPP initialization will fail.  To fix,
      use a device_initcall() for the board file's OPP customization, and
      make the device_initcall board-specific by using a machine_is check.
      Reported-by: default avatarPaul Walmsley <paul@pwsan.com>
      Signed-off-by: default avatarKevin Hilman <khilman@ti.com>
      65bf7ca0
    • Tony Lindgren's avatar
      ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. · 1d8643dd
      Tony Lindgren authored
      On n900 uart1 pins are not not used for uart, instead they are
      used to connect to a cell modem over ssi. Looks like we're
      currently missing these signal names for 3430 for some reason,
      and only have some of them listed for 3630. Obviously the signals
      are there for 3430 if n900 is using them and they are documented
      in some TRMs.
      
      Note that these will eventually be replaced by device tree
      based pinctrl-single.c driver. But for now these are needed
      to verify the SSI pins for devices like Nokia N900.
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      1d8643dd
    • Tony Lindgren's avatar
      ARM: OMAP2+: Fix location of select PINCTRL · 24942e8a
      Tony Lindgren authored
      Commit 8f31cefe (ARM: OMAP2+: select PINCTRL in Kconfig)
      added select PINCTRL, but accdentally added it to a wrong
      location.
      
      We want to select if for ARCH_OMAP2PLUS, not for
      ARCH_OMAP2PLUS_TYPICAL.
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      24942e8a
    • Peter Ujfalusi's avatar
      ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio · eef6fcaa
      Peter Ujfalusi authored
      Fixes the following errors:
      [    2.318084] omap-mcbsp 49022000.mcbsp: invalid rx DMA channel
      [    2.324432] omap-mcbsp 49024000.mcbsp: invalid rx DMA channel
      
      Which is because we failed to link the sidetone hwmod for McBSP2/3. The
      missing sidetone hwmod link will prevent omap_device_alloc() to append the
      DMA resources since we - accidentally - end up having the same number of
      resources provided from DT (IO/IRQ) as we have in hwmod for the McBSP ports
      without the ST resources.
      Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
      Acked-by: default avatarBenoit Cousson <b-cousson@ti.com>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      eef6fcaa
    • Kevin Hilman's avatar
      ARM: OMAP2: UART: fix console UART mismatched runtime PM status · 44b1d42a
      Kevin Hilman authored
      The runtime PM framework assumes that the hardware state of devices
      when initialized is disabled.  For all omap_devices, we idle/disable
      device by default.  However, the console uart uses a "no idle" option
      during omap_device init in order to allow earlyprintk usage to work
      seamlessly during boot.
      
      Because the hardware is left partially enabled after init (whatever
      the bootloader settings were), the omap_device should later be fully
      initialized (including mux) and the runtime PM framework should be
      told that the device is active, and not disabled so that the hardware
      state is in sync with runtime PM state.
      
      To fix, after the device has been created/registered, call
      omap_device_enable() to finialize init and use pm_runtime_set_active()
      to tell the runtime PM core the device is enabled.
      
      Tested on 2420/n810, 3530/Overo, 3530/Beagle, 3730/OveroSTORM,
      3730/Beagle-xM, 4460/PandaES.
      Suggested-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Cc: Felipe Balbi <balbi@ti.com>
      Cc: Sourav Poddar <sourav.poddar@ti.com>
      Signed-off-by: default avatarKevin Hilman <khilman@ti.com>
      44b1d42a
    • Paul Walmsley's avatar
      ARM: OMAP3: PM: apply part of the erratum i582 workaround · 856c3c5b
      Paul Walmsley authored
      On OMAP34xx/35xx, and OMAP36xx chips with ES < 1.2, if the PER
      powerdomain goes to OSWR or OFF while CORE stays at CSWR or ON, or if,
      upon chip wakeup from OSWR or OFF, the CORE powerdomain goes ON before
      PER, the UART3/4 FIFOs and McBSP2/3 SIDETONE memories will be
      unusable.  This is erratum i582 in the OMAP36xx Silicon Errata
      document.
      
      This patch implements one of several parts of the workaround: the
      addition of the wakeup dependency between the PER and WKUP
      clockdomains, such that PER will wake up at the same time CORE_L3
      does.
      
      This is not a complete workaround.  For it to be complete:
      
      1. the PER powerdomain's next power state must not be set to OSWR or
         OFF if the CORE powerdomain's next power state is set to CSWR or
         ON;
      
      2. the UART3/4 FIFO and McBSP2/3 SIDETONE loopback tests should be run
         if the LASTPOWERSTATEENTERED bits for PER and CORE indicate that
         PER went OFF while CORE stayed on.  If loopback tests fail, then
         those devices will be unusable until PER and CORE can undergo a
         transition from ON to OSWR/OFF and back ON.
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
      Cc: Tero Kristo <t-kristo@ti.com>
      Cc: Kevin Hilman <khilman@ti.com>
      Signed-off-by: default avatarKevin Hilman <khilman@ti.com>
      856c3c5b
  5. 21 Oct, 2012 1 commit
  6. 20 Oct, 2012 9 commits
    • Linus Torvalds's avatar
      Linux 3.7-rc2 · 6f0c0580
      Linus Torvalds authored
      6f0c0580
    • Linus Torvalds's avatar
      Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 · 198190a1
      Linus Torvalds authored
      Pull arm64 fixes from Catalin Marinas:
       "Main changes:
         - AArch64 Linux compilation fixes following 3.7-rc1 changes
           (MODULES_USE_ELF_RELA, update_vsyscall() prototype)
         - Unnecessary register setting in start_thread() (thanks to Al Viro)
         - ptrace fixes"
      
      * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
        arm64: fix alignment padding in assembly code
        arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints
        arm64: ptrace: make structure padding explicit for debug registers
        arm64: No need to set the x0-x2 registers in start_thread()
        arm64: Ignore memory blocks below PHYS_OFFSET
        arm64: Fix the update_vsyscall() prototype
        arm64: Select MODULES_USE_ELF_RELA
        arm64: Remove duplicate inclusion of mmu_context.h in smp.c
      198190a1
    • Marc Zyngier's avatar
      arm64: fix alignment padding in assembly code · aeed41a9
      Marc Zyngier authored
      An interesting effect of using the generic version of linkage.h
      is that the padding is defined in terms of x86 NOPs, which can have
      even more interesting effects when the assembly code looks like this:
      
      ENTRY(func1)
      	mov	x0, xzr
      ENDPROC(func1)
      	// fall through
      ENTRY(func2)
      	mov	x0, #1
      	ret
      ENDPROC(func2)
      
      Admittedly, the code is not very nice. But having code from another
      architecture doesn't look completely sane either.
      
      The fix is to add arm64's version of linkage.h, which causes the insertion
      of proper AArch64 NOPs.
      Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      aeed41a9
    • Kees Cook's avatar
      use clamp_t in UNAME26 fix · 31fd84b9
      Kees Cook authored
      The min/max call needed to have explicit types on some architectures
      (e.g. mn10300). Use clamp_t instead to avoid the warning:
      
        kernel/sys.c: In function 'override_release':
        kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default]
      Reported-by: default avatarFengguang Wu <fengguang.wu@intel.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      31fd84b9
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 8c1bee68
      Linus Torvalds authored
      Pull perf fixes from Ingo Molnar:
       "Assorted small fixes"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf python: Properly link with libtraceevent
        perf hists browser: Add back callchain folding symbol
        perf tools: Fix build on sparc.
        perf python: Link with libtraceevent
        perf python: Initialize 'page_size' variable
        tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter
        lib tools traceevent: Add back pevent assignment in __pevent_parse_format()
        perf hists browser: Fix off-by-two bug on the first column
        perf tools: Remove warnings on JIT samples for srcline sort key
        perf tools: Fix segfault when using srcline sort key
        perf: Require exclude_guest to use PEBS - kernel side enforcement
        perf tool: Precise mode requires exclude_guest
      8c1bee68
    • Arnaldo Carvalho de Melo's avatar
      perf python: Properly link with libtraceevent · 45bff41a
      Arnaldo Carvalho de Melo authored
      Namhyung Kim reported that the build fails with:
      
        GEN python/perf.so
        gcc: error: python_ext_build/tmp//../../libtraceevent.a: No such file or directory
        error: command 'gcc' failed with exit status 1
        cp: cannot stat `python_ext_build/lib/perf.so': No such file or directory
        make: *** [python/perf.so] Error 1
      
      We need to propagate the TE_PATH variable to the setup.py file.
      Reported-by: default avatarNamhyung Kim <namhyung@kernel.org>
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Link: http://lkml.kernel.org/n/tip-8umiPbm4sxpknKivbjgykhut@git.kernel.org
      [ Fixed superfluous variable build error. ]
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      45bff41a
    • Ingo Molnar's avatar
      Merge tag 'perf-urgent-for-mingo' of... · a448a031
      Ingo Molnar authored
      Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
      
      Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
      
      * The python binding needs to link with libtraceevent and to initialize
        the 'page_size' variable so that mmaping works again.
      
      * The callchain folding character that appears on the TUI just before
        the overhead had disappeared due to recent changes, add it back.
      
      * Intel PEBS in VT-x context uses the DS address as a guest linear address,
        even though its programmed by the host as a host linear address. This either
        results in guest memory corruption and or the hardware faulting and 'crashing'
        the virtual machine.  Therefore we have to disable PEBS on VT-x enter and
        re-enable on VT-x exit, enforcing a strict exclude_guest.
      
        Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern.
      
      * Fix build on sparc due to UAPI, fix from David Miller.
      
      * Fixes for the srclike sort key for unresolved symbols and when processing
        samples in JITted code, where we don't have an ELF file, just an special
        symbol table, fixes from Namhyung Kim.
      
      * Fix some leaks in libtraceevent, from Steven Rostedt.
      Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
      a448a031
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 37820108
      Linus Torvalds authored
      Pull ARM soc fixes from Olof Johansson:
       "A set of fixes and some minor cleanups for -rc2:
      
         - A series from Arnd that fixes warnings in drivers and other code
           included by ARM defconfigs.  Most have been acked by corresponding
           maintainers (and seem quite hard to argue not picking up anyway in
           the few exception cases).
         - A few misc patches from the list for integrator/vt8500/i.MX
         - A batch of fixes to OMAP platforms, fixing:
           - boot problems on beaglebone,
           - regression fixes for local timers
           - clockdomain locking fixes
           - a few boot/sparse warnings
         - For Tegra:
           - Clock rate calculation overflow fix
           - Revert a change that removed timer clocks and a fix for symbol
             name clashes
         - For Renesas:
           - IO accessor / annotation cleanups to remove warnings
         - For Kirkwood/Dove/mvebu:
           - Fixes for device trees for Dove (some minor cleanups, some fixes)
           - Fixes for the mvebu gpio driver
           - Fix build problem for Feroceon due to missing ifdefs
           - Fix lsxl DTS files"
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
        ARM: kirkwood: fix buttons on lsxl boards
        ARM: kirkwood: fix LEDs names for lsxl boards
        ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
        gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type
        ARM: dove: Add crypto engine to DT
        ARM: dove: Remove watchdog from DT
        ARM: dove: Restructure SoC device tree descriptor
        ARM: dove: Fix clock names of sata and gbe
        ARM: dove: Fix tauros2 device tree init
        ARM: dove: Add pcie clock support
        ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory
        ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable
        ARM: s3c: mark s3c2440_clk_add as __init_refok
        spi/s3c64xx: use correct dma_transfer_direction type
        ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message
        ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck
        ARM: OMAP: resolve sparse warning concerning debug_card_init()
        ARM: OMAP4: Fix twd_local_timer_register regression
        ARM: tegra: add tegra_timer clock
        ARM: tegra: rename tegra system timer
        ...
      37820108
    • David Howells's avatar
      MODSIGN: Move the magic string to the end of a module and eliminate the search · caabe240
      David Howells authored
      Emit the magic string that indicates a module has a signature after the
      signature data instead of before it.  This allows module_sig_check() to
      be made simpler and faster by the elimination of the search for the
      magic string.  Instead we just need to do a single memcmp().
      
      This works because at the end of the signature data there is the
      fixed-length signature information block.  This block then falls
      immediately prior to the magic number.
      
      From the contents of the information block, it is trivial to calculate
      the size of the signature data and thus the size of the actual module
      data.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      caabe240
  7. 19 Oct, 2012 2 commits