- 27 Jul, 2015 2 commits
-
-
Baruch Siach authored
This adds pinctrl and gpio driver to the CX92755 SoC "General Purpose Pin Mapping" hardware block. The CX92755 is one SoC from the Conexant Digicolor series. Pin mapping hardware supports configuring pins as either GPIO, or up to 3 other "client select" functions. This driver adds support for pin muxing using the generic device tree binding, and a basic gpiolib driver for the GPIO functionality. This driver does not currently support GPIO interrupts, and pad configuration. v2: * Address review comments for Linus Walleij: - Add a pointer to pinctrl_desc in struct dc_pinmap - Drop the now redundant pinctrl_pin_desc field - Adapt dc_get_group_{name,pins} to these changes, and add a comment explaining the 1-to-1 pin-groups relation * Staticise dc_pmxops * Protect the GP_CLIENTSEL clct parameter with parenthesis Signed-off-by:Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
Baruch Siach authored
Add pinctrl device tree binding documentation for the General Purpose Pin Mapping module of the Conexant CX92755 SoC. Signed-off-by:
-
- 23 Jul, 2015 3 commits
-
-
Linus Walleij authored
If the pin controller probes before the GPIO driver it needs to populate the GPIO driver state containers ahead of the actual driver probe as the addresses are used by both halves of the driver. Signed-off-by: -
Linus Walleij authored
Instead of indexing around the GPIO ranges to find a chip, look directly in the local array of state containers for nmk_gpio_chip:s. Signed-off-by: -
Linus Walleij authored
Break out the function that allocates the nomadik GPIO chip state container to its own function. Signed-off-by:
-
- 17 Jul, 2015 31 commits
-
-
kbuild test robot authored
Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Thomas Gleixner authored
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by:Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
-
Thomas Gleixner authored
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: -
Thomas Gleixner authored
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: -
Thomas Gleixner authored
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: -
Thomas Gleixner authored
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: -
Thomas Gleixner authored
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: -
Thomas Gleixner authored
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: -
Jiang Liu authored
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and update was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: -
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
-
Thomas Gleixner authored
Chained irq handlers usually set up handler data as well. We now have a function to set both under irq_desc->lock. Replace the two calls with one. Search and conversion was done with coccinelle. Reported-by:
-
Timur Tabi authored
Add the pinctrl driver for the Qualcomm Technologies QDF2xxx ARM64 SoCs, which uses the Qualcomm Technologies TLMM pinctrl/gpio device. This driver is probed via ACPI and uses the pinctrl-msm.c backend driver. This driver is intended to be used only an ACPI-enabled system. As such, UEFI will handle all pin control configuration, so this driver does not provide pin control functions. It is effectively a GPIO-only driver. Signed-off-by:
Timur Tabi <timur@codeaurora.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by:
-
Bjorn Andersson authored
This introduces pinctrl drivers for gpio and mpp blocks found in family A PMICs. Tested-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
The "function" of the MPP driver was inherited from the GPIO driver, but the differences between the two hardware blocks makes both the driver and the device tree binding to be awkward. Instead of overloading the "normal" function with various modes this patch transposes the pinmux function to represent the three operating modes of the MPP (digital, analog and current sink). The properties of pin pairing and DTEST routing is moved to separate properties. Signed-off-by:
-
Bjorn Andersson authored
When the MPP is configured for analog output the output level is selected by the AOUT_CTL register, this patch makes it possible to control this. Signed-off-by:
-
Joachim Eastwood authored
The dedicated USB1 pins can be configured with pull-down and for low power mode (suspend). Add support for this in the pinctrl driver. Signed-off-by:
Joachim Eastwood <manabian@gmail.com> Signed-off-by:
-
Jon Hunter authored
The function pinconf_dbg_config_print() only prints the configuration of the 1st pin config in an array of pin configurations. Fix this so that all pin configurations in the array are displayed. There are a few places in the code where the pin configs are displayed and so add a helper function to display the pin configs to simplify the code. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
Jon Hunter authored
The function pinconf_dbg_config_write() currently only supports configuring a pin configuration mapping via the debugfs. Allow group mappings to also be configured via the debugfs. Signed-off-by:
-
Stephen Boyd authored
Assign pm_power_off() if we have the PS_HOLD functionality so that we can properly shutdown the SoC. Otherwise, shutdown won't do anything besides put the CPU into a tight loop. Unfortunately, we have to use a singleton here because pm_power_off() doesn't take any arguments. Fortunately there's only one instance of the pinctrl device on a running system so this isn't a problem. Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Acked-by:
-
- 16 Jul, 2015 4 commits
-
-
Krzysztof Kozlowski authored
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Grygorii Strashko authored
On DRA7 there is one pinctrl domain (dra7_pmx_core) and PRCM wake-up IRQ is not shared, so remove quirk. Cc: Nishanth Menon <nm@ti.com> Fixes: 31320bea ('pinctrl: single: Add DRA7 pinctrl compatibility') Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Tero Kristo <t-kristo@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Geert Uytterhoeven authored
Since the removal of the r8a7740 legacy SoC code in commit 44d88c75 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), r8a7740 is only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to match platform devices by name anymore, hence remove the corresponding platform_device_id entry. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Geert Uytterhoeven authored
Since the removal of the r8a7740 legacy SoC code in commit 44d88c75 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"), r8a7740 is only supported in generic ARM multi-platform builds. Hence CONFIG_ARCH_MULTIPLATFORM is always set, and the check can be removed. Signed-off-by:
-
