- 25 Jun, 2019 40 commits
-
-
Guido Kiener authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit f1d3fba1 ] When a request must be dequeued with net2280_dequeue() e.g. due to a device clear action and the same request is finished by the function scan_dma_completions() then the function net2280_dequeue() does not find the request in the following search loop and returns the error -EINVAL without restoring the status ep->stopped. Thus the endpoint keeps blocked and does not receive any data anymore. This fix restores the status and does not issue an error message. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Sasha Levin (Microsoft) <sashal@kernel.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Guido Kiener authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 9d6a54c1 ] The OUT endpoint normally blocks (NAK) subsequent packets when a short packet was received and returns an incomplete queue entry to the gadget driver. Thereby the gadget driver can detect a short packet when reading queue entries with a length that is not equal to a multiple of packet size. The start_queue() function enables receiving OUT packets regardless of the content of the OUT FIFO. This results in a race: With the current code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat) & BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short packet will be received, and then start_queue() will call stop_out_naking(). That's what we don't want (OUT naking gets turned off while there is data in the FIFO) because then the next driver request might receive a mixture of old and new packets. With the patch, this race can't occur because the FIFO's state is tested after we know that OUT naking is already turned on, and OUT naking is stopped only when both of the conditions are met. This ensures that all received data is delivered to the gadget driver, which can detect a short packet now before new packets are appended to the last short packet. Acked-by:
-
Mao Wenan authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit ac0cdb3d ] Add the missing uart_unregister_driver() and i2c_del_driver() before return from sc16is7xx_init() in the error handling case. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Reviewed-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit e166e4fd ] Since Commit 21d1196a ("ipv4: set transport header earlier"), skb->transport_header has been always set before entering INET netfilter. This patch is to set skb->transport_header for bridge before entering INET netfilter by bridge-nf-call-iptables. It also fixes an issue that sctp_error() couldn't compute a right csum due to unset skb->transport_header. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by:
Li Shuang <shuali@redhat.com> Suggested-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Aditya Pakki authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 5bf7295f ] netdev_alloc_skb can fail and return a NULL pointer which is dereferenced without a check. The patch avoids such a scenario. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 61c59355 upstream. _dev_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _dev_ has been null checked. Addresses-Coverity-ID: 1462020 Fixes: bb1b40c7 ("usbnet: ipheth: prevent TX queue timeouts when device not ready") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Alexander Kappner authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit bb1b40c7 upstream. iOS devices require the host to be "trusted" before servicing network packets. Establishing trust requires the user to confirm a dialog on the iOS device.Until trust is established, the iOS device will silently discard network packets from the host. Currently, the ipheth driver does not detect whether an iOS device has established trust with the host, and immediately sets up the transmit queues. This causes the following problems: - Kernel taint due to WARN() in netdev watchdog. - Dmesg spam ("TX timeout"). - Disruption of user space networking activity (dhcpd, etc...) when new interface comes up but cannot be used. - Unnecessary host and device wakeups and USB traffic Example dmesg output: [ 1101.319778] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out [ 1101.319817] ------------[ cut here ]------------ [ 1101.319828] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x20f/0x220 [ 1101.319831] Modules linked in: ipheth usbmon nvidia_drm(PO) nvidia_modeset(PO) nvidia(PO) iwlmvm mac80211 iwlwifi btusb btrtl btbcm btintel qmi_wwan bluetooth cfg80211 ecdh_generic thinkpad_acpi rfkill [last unloaded: ipheth] [ 1101.319861] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.13.12.1 #1 [ 1101.319864] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET62W (1.35 ) 11/10/2016 [ 1101.319867] task: ffffffff81e11500 task.stack: ffffffff81e00000 [ 1101.319873] RIP: 0010:dev_watchdog+0x20f/0x220 [ 1101.319876] RSP: 0018:ffff8810a3c03e98 EFLAGS: 00010292 [ 1101.319880] RAX: 000000000000003a RBX: 0000000000000000 RCX: 0000000000000000 [ 1101.319883] RDX: ffff8810a3c15c48 RSI: ffffffff81ccbfc2 RDI: 00000000ffffffff [ 1101.319886] RBP: ffff880c04ebc41c R08: 0000000000000000 R09: 0000000000000379 [ 1101.319889] R10: 00000100696589d0 R11: 0000000000000378 R12: ffff880c04ebc000 [ 1101.319892] R13: 0000000000000000 R14: 0000000000000001 R15: ffff880c2865fc80 [ 1101.319896] FS: 0000000000000000(0000) GS:ffff8810a3c00000(0000) knlGS:0000000000000000 [ 1101.319899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1101.319902] CR2: 00007f3ff24ac000 CR3: 0000000001e0a000 CR4: 00000000003406f0 [ 1101.319905] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1101.319908] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1101.319910] Call Trace: [ 1101.319914] <IRQ> [ 1101.319921] ? dev_graft_qdisc+0x70/0x70 [ 1101.319928] ? dev_graft_qdisc+0x70/0x70 [ 1101.319934] ? call_timer_fn+0x2e/0x170 [ 1101.319939] ? dev_graft_qdisc+0x70/0x70 [ 1101.319944] ? run_timer_softirq+0x1ea/0x440 [ 1101.319951] ? timerqueue_add+0x54/0x80 [ 1101.319956] ? enqueue_hrtimer+0x38/0xa0 [ 1101.319963] ? __do_softirq+0xed/0x2e7 [ 1101.319970] ? irq_exit+0xb4/0xc0 [ 1101.319976] ? smp_apic_timer_interrupt+0x39/0x50 [ 1101.319981] ? apic_timer_interrupt+0x8c/0xa0 [ 1101.319983] </IRQ> [ 1101.319992] ? cpuidle_enter_state+0xfa/0x2a0 [ 1101.319999] ? do_idle+0x1a3/0x1f0 [ 1101.320004] ? cpu_startup_entry+0x5f/0x70 [ 1101.320011] ? start_kernel+0x444/0x44c [ 1101.320017] ? early_idt_handler_array+0x120/0x120 [ 1101.320023] ? x86_64_start_kernel+0x145/0x154 [ 1101.320028] ? secondary_startup_64+0x9f/0x9f [ 1101.320033] Code: 20 04 00 00 eb 9f 4c 89 e7 c6 05 59 44 71 00 01 e8 a7 df fd ff 89 d9 4c 89 e6 48 c7 c7 70 b7 cd 81 48 89 c2 31 c0 e8 97 64 90 ff <0f> ff eb bf 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 [ 1101.320103] ---[ end trace 0cc4d251e2b57080 ]--- [ 1101.320110] ipheth 1-5:4.2: ipheth_tx_timeout: TX timeout The last message "TX timeout" is repeated every 5 seconds until trust is established or the device is disconnected, filling up dmesg. The proposed patch eliminates the problem by, upon connection, keeping the TX queue and carrier disabled until a packet is first received from the iOS device. This is reflected by the confirmed_pairing variable in the device structure. Only after at least one packet has been received from the iOS device, the transmit queue and carrier are brought up during the periodic device poll in ipheth_carrier_set. Because the iOS device will always send a packet immediately upon trust being established, this should not delay the interface becoming useable. To prevent failed UBRs in ipheth_rcvbulk_callback from perpetually re-enabling the queue if it was disabled, a new check is added so only successful transfers re-enable the queue, whereas failed transfers only trigger an immediate poll. This has the added benefit of removing the periodic control requests to the iOS device until trust has been established and thus should reduce wakeup events on both the host and the iOS device. Signed-off-by:
Alexander Kappner <agk@godking.net> Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 26cb1f36 upstream. Currently only supported on powerpc. Signed-off-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit e59f5bd7 upstream. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 039daac5 upstream. Fixed the following build warning: powerpc-linux-gnu-ld: warning: orphan section `__btb_flush_fixup' from `arch/powerpc/kernel/head_44x.o' being placed in section `__btb_flush_fixup'. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit c28218d4 upstream. Used barrier_nospec to sanitize the syscall table. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 7fef4362 upstream. In order to protect against speculation attacks on indirect branches, the branch predictor is flushed at kernel entry to protect for the following situations: - userspace process attacking another userspace process - userspace process attacking the kernel Basically when the privillege level change (i.e.the kernel is entered), the branch predictor state is flushed. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 98518c4d upstream. In order to flush the branch predictor the guest kernel performs writes to the BUCSR register which is hypervisor privilleged. However, the branch predictor is flushed at each KVM entry, so the branch predictor has been already flushed, so just return as soon as possible to guest. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit e7aa61f4 upstream. Switching from the guest to host is another place where the speculative accesses can be exploited. Flush the branch predictor when entering KVM. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 3bc8ea86 upstream. If the user choses not to use the mitigations, replace the code sequence with nops. Signed-off-by:
-
ZhangXiaoxu authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 19fad20d ] There is a UBSAN report as below: UBSAN: Undefined behaviour in net/ipv4/tcp_input.c:2877:56 signed integer overflow: 2147483647 * 1000 cannot be represented in type 'int' CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.1.0-rc4-00058-g582549e3 #1 Call Trace: <IRQ> dump_stack+0x8c/0xba ubsan_epilogue+0x11/0x60 handle_overflow+0x12d/0x170 ? ttwu_do_wakeup+0x21/0x320 __ubsan_handle_mul_overflow+0x12/0x20 tcp_ack_update_rtt+0x76c/0x780 tcp_clean_rtx_queue+0x499/0x14d0 tcp_ack+0x69e/0x1240 ? __wake_up_sync_key+0x2c/0x50 ? update_group_capacity+0x50/0x680 tcp_rcv_established+0x4e2/0xe10 tcp_v4_do_rcv+0x22b/0x420 tcp_v4_rcv+0xfe8/0x1190 ip_protocol_deliver_rcu+0x36/0x180 ip_local_deliver+0x15b/0x1a0 ip_rcv+0xac/0xd0 __netif_receive_skb_one_core+0x7f/0xb0 __netif_receive_skb+0x33/0xc0 netif_receive_skb_internal+0x84/0x1c0 napi_gro_receive+0x2a0/0x300 receive_buf+0x3d4/0x2350 ? detach_buf_split+0x159/0x390 virtnet_poll+0x198/0x840 ? reweight_entity+0x243/0x4b0 net_rx_action+0x25c/0x770 __do_softirq+0x19b/0x66d irq_exit+0x1eb/0x230 do_IRQ+0x7a/0x150 common_interrupt+0xf/0xf </IRQ> It can be reproduced by: echo 2147483647 > /proc/sys/net/ipv4/tcp_min_rtt_wlen Fixes: f6722583 ("tcp: track min RTT using windowed min-filter") Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Vinod Koul authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit b561af36 ] stmmac_check_ether_addr() checks the MAC address and assigns one in driver open(). In many cases when we create slave netdevice, the dev addr is inherited from master but the master dev addr maybe NULL at that time, so move this call to driver probe so that address is always valid. Signed-off-by:
Xiaofei Shen <xiaofeis@codeaurora.org> Tested-by:
Sneh Shah <snehshah@codeaurora.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Hangbin Liu authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 925b0c84 ] If we add a bond device which is already the master of the team interface, we will hold the team->lock in team_add_slave() first and then request the lock in team_set_mac_address() again. The functions are called like: - team_add_slave() - team_port_add() - team_port_enter() - team_modeop_port_enter() - __set_port_dev_addr() - dev_set_mac_address() - bond_set_mac_address() - dev_set_mac_address() - team_set_mac_address Although team_upper_dev_link() would check the upper devices but it is called too late. Fix it by adding a checking before processing the slave. v2: Do not split the string in netdev_err() Fixes: 3d249d4c ("net: introduce ethernet teaming device") Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1830176 [ Upstream commit 20ff83f1 ] Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1830176 This reverts commit b3f3107f which is commit 310ca162 upstream. Jan Kara has reported seeing problems with this patch applied, as has Salvatore Bonaccorso, so let's drop it for now. Reported-by:
Salvatore Bonaccorso <carnil@debian.org> Reported-by:
Jan Kara <jack@suse.cz> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Daniel Borkmann authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit f7bd9e36 upstream. Add a bpf_check_basics_ok() and reject filters that are of invalid size much earlier, so we don't do any useless work such as invoking bpf_prog_alloc(). Currently, rejection happens in bpf_check_classic() only, but it's really unnecessarily late and they should be rejected at earliest point. While at it, also clean up one bpf_prog_size() to make it consistent with the remaining invocations. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 8c63bf9a upstream. A similar issue as fixed by Patch "tipc: check bearer name with right length in tipc_nl_compat_bearer_enable" was also found by syzbot in tipc_nl_compat_link_set(). The length to check with should be 'TLV_GET_DATA_LEN(msg->req) - offsetof(struct tipc_link_config, name)'. Reported-by: syzbot+de00a87b8644a582ae79@syzkaller.appspotmail.com Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 6f07e5f0 upstream. Syzbot reported the following crash: BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:961 memchr+0xce/0x110 lib/string.c:961 string_is_valid net/tipc/netlink_compat.c:176 [inline] tipc_nl_compat_bearer_enable+0x2c4/0x910 net/tipc/netlink_compat.c:401 __tipc_nl_compat_doit net/tipc/netlink_compat.c:321 [inline] tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:354 tipc_nl_compat_handle net/tipc/netlink_compat.c:1162 [inline] tipc_nl_compat_recv+0x1ae7/0x2750 net/tipc/netlink_compat.c:1265 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] Uninit was created at: __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] It was triggered when the bearer name size < TIPC_MAX_BEARER_NAME, it would check with a wrong len/TLV_GET_DATA_LEN(msg->req), which also includes priority and disc_domain length. This patch is to fix it by checking it with a right length: 'TLV_GET_DATA_LEN(msg->req) - offsetof(struct tipc_bearer_config, name)'. Reported-by: syzbot+8b707430713eb46e1e45@syzkaller.appspotmail.com Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 7caa56f0 upstream. It means userspace gave us a ruleset where there is some other data after the ebtables target but before the beginning of the next rule. Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by: syzbot+659574e7bcc7f7eb4df7@syzkaller.appspotmail.com Signed-off-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 7c2bd9a3 upstream. syzbot is reporting uninitialized value at rpc_sockaddr2uaddr() [1]. This is because syzbot is setting AF_INET6 to "struct sockaddr_in"->sin_family (which is embedded into user-visible "struct nfs_mount_data" structure) despite nfs23_validate_mount_data() cannot pass sizeof(struct sockaddr_in6) bytes of AF_INET6 address to rpc_sockaddr2uaddr(). Since "struct nfs_mount_data" structure is user-visible, we can't change "struct nfs_mount_data" to use "struct sockaddr_storage". Therefore, assuming that everybody is using AF_INET family when passing address via "struct nfs_mount_data"->addr, reject if its sin_family is not AF_INET. [1] https://syzkaller.appspot.com/bug?id=599993614e7cbbf66bc2656a919ab2a95fb5d75cReported-by:
syzbot <syzbot+047a11c361b872896a4f@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 89189557 upstream. Syzkaller report this: sysctl could not get directory: /net//bridge -12 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 7027 Comm: syz-executor.0 Tainted: G C 5.1.0-rc3+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__write_once_size include/linux/compiler.h:220 [inline] RIP: 0010:__rb_change_child include/linux/rbtree_augmented.h:144 [inline] RIP: 0010:__rb_erase_augmented include/linux/rbtree_augmented.h:186 [inline] RIP: 0010:rb_erase+0x5f4/0x19f0 lib/rbtree.c:459 Code: 00 0f 85 60 13 00 00 48 89 1a 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 0c 00 00 4d 85 ed 4c 89 2e 74 ce 4c 89 ea 48 RSP: 0018:ffff8881bb507778 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8881f224b5b8 RCX: ffffffff818f3f6a RDX: 000000000000000a RSI: 0000000000000050 RDI: ffff8881f224b568 RBP: 0000000000000000 R08: ffffed10376a0ef4 R09: ffffed10376a0ef4 R10: 0000000000000001 R11: ffffed10376a0ef4 R12: ffff8881f224b558 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f3e7ce13700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd60fbe9398 CR3: 00000001cb55c001 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: erase_entry fs/proc/proc_sysctl.c:178 [inline] erase_header+0xe3/0x160 fs/proc/proc_sysctl.c:207 start_unregistering fs/proc/proc_sysctl.c:331 [inline] drop_sysctl_table+0x558/0x880 fs/proc/proc_sysctl.c:1631 get_subdir fs/proc/proc_sysctl.c:1022 [inline] __register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335 br_netfilter_init+0x68/0x1000 [br_netfilter] do_one_initcall+0xbc/0x47d init/main.c:901 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Modules linked in: br_netfilter(+) backlight comedi(C) hid_sensor_hub max3100 ti_ads8688 udc_core fddi snd_mona leds_gpio rc_streamzap mtd pata_netcell nf_log_common rc_winfast udp_tunnel snd_usbmidi_lib snd_usb_toneport snd_usb_line6 snd_rawmidi snd_seq_device snd_hwdep videobuf2_v4l2 videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops rc_gadmei_rm008z 8250_of smm665 hid_tmff hid_saitek hwmon_vid rc_ati_tv_wonder_hd_600 rc_core pata_pdc202xx_old dn_rtmsg as3722 ad714x_i2c ad714x snd_soc_cs4265 hid_kensington panel_ilitek_ili9322 drm drm_panel_orientation_quirks ipack cdc_phonet usbcore phonet hid_jabra hid extcon_arizona can_dev industrialio_triggered_buffer kfifo_buf industrialio adm1031 i2c_mux_ltc4306 i2c_mux ipmi_msghandler mlxsw_core snd_soc_cs35l34 snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer ac97_bus snd_compress snd soundcore gpio_da9055 uio ecdh_generic mdio_thunder of_mdio fixed_phy libphy mdio_cavium iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev tpm kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel ide_pci_generic piix aes_x86_64 crypto_simd cryptd ide_core glue_helper input_leds psmouse intel_agp intel_gtt serio_raw ata_generic i2c_piix4 agpgart pata_acpi parport_pc parport floppy rtc_cmos sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: br_netfilter] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 68741688d5fbfe85 ]--- commit 23da9588 ("fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links") forgot to handle start_unregistering() case, while header->parent is NULL, it calls erase_header() and as seen in the above syzkaller call trace, accessing &header->parent->root will trigger a NULL pointer dereference. As that commit explained, there is also no need to call start_unregistering() if header->parent is NULL. Link: http://lkml.kernel.org/r/20190409153622.28112-1-yuehaibing@huawei.com Fixes: 23da9588 ("fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links") Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alexander Shishkin authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 91d3f8a6 upstream. Commit 9ed3f222 ("intel_th: Don't reference unassigned outputs") fixes a NULL dereference for all masters except the last one ("256+"), which keeps the stale pointer after the output driver had been unassigned. Fix the off-by-one. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 9ed3f222 ("intel_th: Don't reference unassigned outputs") Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit baf76f0c upstream. This way, slhc_free() accepts what slhc_init() returns, whether that is an error or not. In particular, the pattern in sl_alloc_bufs() is slcomp = slhc_init(16, 16); ... slhc_free(slcomp); for the error handling path, and rather than complicate that code, just make it ok to always free what was returned by the init function. That's what the code used to do before commit 4ab42d78 ("ppp, slip: Validate VJ compression slot parameters completely") when slhc_init() just returned NULL for the error case, with no actual indication of the details of the error. Reported-by: syzbot+45474c076a4927533d2e@syzkaller.appspotmail.com Fixes: 4ab42d78 ("ppp, slip: Validate VJ compression slot parameters completely") Acked-by:
Ben Hutchings <ben@decadent.org.uk> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 2ac695d1 upstream. Syzbot found a crash: BUG: KMSAN: uninit-value in tipc_nl_compat_name_table_dump+0x54f/0xcd0 net/tipc/netlink_compat.c:872 Call Trace: tipc_nl_compat_name_table_dump+0x54f/0xcd0 net/tipc/netlink_compat.c:872 __tipc_nl_compat_dumpit+0x59e/0xda0 net/tipc/netlink_compat.c:215 tipc_nl_compat_dumpit+0x63a/0x820 net/tipc/netlink_compat.c:280 tipc_nl_compat_handle net/tipc/netlink_compat.c:1226 [inline] tipc_nl_compat_recv+0x1b5f/0x2750 net/tipc/netlink_compat.c:1265 genl_family_rcv_msg net/netlink/genetlink.c:601 [inline] genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:637 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] Uninit was created at: __alloc_skb+0x309/0xa20 net/core/skbuff.c:208 alloc_skb include/linux/skbuff.h:1012 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] It was supposed to be fixed on commit 974cb0e3 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") by checking TLV_GET_DATA_LEN(msg->req) in cmd->header()/tipc_nl_compat_name_table_dump_header(), which is called ahead of tipc_nl_compat_name_table_dump(). However, tipc_nl_compat_dumpit() doesn't handle the error returned from cmd header function. It means even when the check added in that fix fails, it won't stop calling tipc_nl_compat_name_table_dump(), and the issue will be triggered again. So this patch is to add the process for the err returned from cmd header function in tipc_nl_compat_dumpit(). Reported-by: syzbot+3ce8520484b0d4e260a5@syzkaller.appspotmail.com Signed-off-by:
-
Christophe Leroy authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 27da8071 upstream. The commit identified below adds MC_BTB_FLUSH macro only when CONFIG_PPC_FSL_BOOK3E is defined. This results in the following error on some configs (seen several times with kisskb randconfig_defconfig) arch/powerpc/kernel/exceptions-64e.S:576: Error: Unrecognized opcode: `mc_btb_flush' make[3]: *** [scripts/Makefile.build:367: arch/powerpc/kernel/exceptions-64e.o] Error 1 make[2]: *** [scripts/Makefile.build:492: arch/powerpc/kernel] Error 2 make[1]: *** [Makefile:1043: arch/powerpc] Error 2 make: *** [Makefile:152: sub-make] Error 2 This patch adds a blank definition of MC_BTB_FLUSH for other cases. Fixes: 10c5e83a ("powerpc/fsl: Flush the branch predictor at each kernel entry (64bit)") Cc: Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 92edf8df upstream. When I updated the spectre_v2 reporting to handle software count cache flush I got the logic wrong when there's no software count cache enabled at all. The result is that on systems with the software count cache flush disabled we print: Mitigation: Indirect branch cache disabled, Software count cache flush Which correctly indicates that the count cache is disabled, but incorrectly says the software count cache flush is enabled. The root of the problem is that we are trying to handle all combinations of options. But we know now that we only expect to see the software count cache flush enabled if the other options are false. So split the two cases, which simplifies the logic and fixes the bug. We were also missing a space before "(hardware accelerated)". The result is we see one of: Mitigation: Indirect branch serialisation (kernel only) Mitigation: Indirect branch cache disabled Mitigation: Software count cache flush Mitigation: Software count cache flush (hardware accelerated) Fixes: ee13cb24 ("powerpc/64s: Add support for software count cache flush") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Michael Neuling <mikey@neuling.org> Reviewed-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit dfa88658 upstream. Report branch predictor state flush as a mitigation for Spectre variant 2. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 10c5e83a upstream. In order to protect against speculation attacks on indirect branches, the branch predictor is flushed at kernel entry to protect for the following situations: - userspace process attacking another userspace process - userspace process attacking the kernel Basically when the privillege level change (i.e. the kernel is entered), the branch predictor state is flushed. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit f633a8ad upstream. When the command line argument is present, the Spectre variant 2 mitigations are disabled. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 7d8bad99 upstream. Currently for CONFIG_PPC_FSL_BOOK3E the spectre_v2 file is incorrect: $ cat /sys/devices/system/cpu/vulnerabilities/spectre_v2 "Mitigation: Software count cache flush" Which is wrong. Fix it to report vulnerable for now. Fixes: ee13cb24 ("powerpc/64s: Add support for software count cache flush") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 1cbf8990 upstream. The BUCSR register can be used to invalidate the entries in the branch prediction mechanisms. Signed-off-by:
-
Diana Craciun authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 76a5eaa3 upstream. In order to protect against speculation attacks (Spectre variant 2) on NXP PowerPC platforms, the branch predictor should be flushed when the privillege level is changed. This patch is adding the infrastructure to fixup at runtime the code sections that are performing the branch predictor flush depending on a boot arg parameter which is added later in a separate patch. Signed-off-by:
-
Michael Neuling authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 51c3c62b upstream. This stops us from doing code patching in init sections after they've been freed. In this chain: kvm_guest_init() -> kvm_use_magic_page() -> fault_in_pages_readable() -> __get_user() -> __get_user_nocheck() -> barrier_nospec(); We have a code patching location at barrier_nospec() and kvm_guest_init() is an init function. This whole chain gets inlined, so when we free the init section (hence kvm_guest_init()), this code goes away and hence should no longer be patched. We seen this as userspace memory corruption when using a memory checker while doing partition migration testing on powervm (this starts the code patching post migration via /sys/kernel/mobility/migration). In theory, it could also happen when using /sys/kernel/debug/powerpc/barrier_nospec. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit 99d54754 upstream. Look for fw-features properties to determine the appropriate settings for the count cache flush, and then call the generic powerpc code to set it up based on the security feature flags. Signed-off-by:
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1830176 commit ba72dc17 upstream. Use the existing hypercall to determine the appropriate settings for the count cache flush, and then call the generic powerpc code to set it up based on the security feature flags. Signed-off-by:
-
