- 13 Apr, 2021 11 commits
-
-
Kuninori Morimoto authored
We can use 100 char now for 1 line. This patch tidyup unreadable dev_dbg() message. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87fszwwf8o.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
simple-card / audio-graph can use clock as dai->clk or dai->sysclk. These related information should be indicated at same position. This patch tidyup it. Signed-off-by:
-
Kuninori Morimoto authored
Current asoc_simple_canonicalize_cpu/platform() is assuming single CPU, single Platform, but we want to support Multi support. This patch is prepare for it. Signed-off-by:
-
Kuninori Morimoto authored
We shouldn't use dai_props->cpus/codecs/cpu_dai/codec_dai/codec_conf directly, because these are array to supporting multi CPU/Codec/Platform. This patch adds asoc_link_to_xxx() macro for it. Signed-off-by:
-
Kuninori Morimoto authored
Now ALSA is supporting multi-CPU/Codec, thus, we want to know number of CPU/Codec when debugging. This patch indicates it. Signed-off-by:
-
Kuninori Morimoto authored
link->dai_fmt might be 0. Don't indicate it in such case when debugging. Signed-off-by:
-
Kuninori Morimoto authored
ASoC is now supporting multi DAI, but, current simple-card / audio-graph are assuming fixed single DAI. This patch cares multi DAI at asoc_simple_clean_reference() for of_node_put(). Signed-off-by:
-
Kuninori Morimoto authored
ASoC is now supporting multi DAI, but, current simple-card / audio-graph are assuming fixed single DAI. Now, asoc_simple_parse_xxx() macro is assuming single DAI. To support multi-CPU/Codec, this patch unpack asoc_simple_parse_xxx() macro, and uses "&dai_link->cpus[i]" instead of "dai_link->cpus". Signed-off-by:
-
Kuninori Morimoto authored
ASoC is now supporting multi DAI, but, current simple-card / audio-graph are assuming fixed single DAI. This patch uses for_each_prop_xxx() to support multi DAI. Signed-off-by:
-
Kuninori Morimoto authored
li->dais is same as number of CPU + Codec, li->conf is same as number of Codec when dummy-Codec. li->dais/li->conf are no longer needed. This patch removes these. Signed-off-by:
-
Kuninori Morimoto authored
We couldn't setup dai_props cpu_dai/codec_dai at the initial timing, because "counting DAIs loop" and "detecting DAIs loop" were different. But we can do it now, because these are using same loops. This patch setups dai_props cpu_dai/codec_dai at the initial timing. It can removes triky code from simple-card / audio-graph. Signed-off-by:
-
- 12 Apr, 2021 15 commits
-
-
Mark Brown authored
Merge series "ASoC: SOF: Intel: descriptor corrections for TGL and ADL" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: One missed property for TigerLake and need for separate descriptors between ADL-S and the other flavors. Libin Yang (1): ASoC: SOF: Intel: add missing use_acpi_target_states for TGL platforms Sathya Prakash M R (1): ASoC: SOF: Intel: Update ADL P to use its own descriptor sound/soc/sof/intel/pci-tgl.c | 20 +++++++++++++++++++- sound/soc/sof/intel/tgl.c | 2 +- 2 files changed, 20 insertions(+), 2 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: SOF: simplify probe and report errors" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>: These patches simplify the sof_probe_complete handling and address reporting of errors during probe. Peter Ujfalusi (2): ASoC: SOF: core: Add missing error prints to device probe operation ASoC: SOF: Simplify sof_probe_complete handling for acpi/pci/of sound/soc/sof/core.c | 9 +++++++-- sound/soc/sof/sof-acpi-dev.c | 18 +++--------------- sound/soc/sof/sof-of-dev.c | 18 +++--------------- sound/soc/sof/sof-pci-dev.c | 20 ++++---------------- 4 files changed, 17 insertions(+), 48 deletions(-) -- 2.25.1
-
Mark Brown authored
Merge series "ASoC: SOF: simplify nocodec mode" from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>: This set of patches simplify the implementation of nocodec mode in SOF. Pierre-Louis Bossart (6): ASoC: SOF: add Kconfig option for probe workqueues ASoC: soc-acpi: add new fields for mach_params ASoC: SOF: change signature of set_mach_params() callback ASoC: SOF: Intel: update set_mach_params() ASoC: SOF: pcm: export snd_pcm_dai_link_fixup ASOC: SOF: simplify nocodec mode include/sound/soc-acpi.h | 4 ++++ include/sound/sof.h | 3 --- sound/soc/sof/Kconfig | 11 +++++++++++ sound/soc/sof/intel/bdw.c | 8 ++++++-- sound/soc/sof/intel/byt.c | 22 +++++++++++++--------- sound/soc/sof/intel/hda.c | 8 ++++++-- sound/soc/sof/intel/hda.h | 2 +- sound/soc/sof/nocodec.c | 39 +++++++++++++++++++++------------------ sound/soc/sof/ops.h | 6 ++---- sound/soc/sof/pcm.c | 1 + sound/soc/sof/sof-audio.c | 34 +++++++++++++++------------------- sound/soc/sof/sof-priv.h | 2 +- 12 files changed, 81 insertions(+), 59 deletions(-) -- 2.25.1
-
Sathya Prakash M R authored
ADL P has specific machines and hence having its own table will help separate the machines and FW Reviewed-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Sathya Prakash M R <sathya.prakash.m.r@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210412161519.13508-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Libin Yang authored
All Intel TigerLake platforms should support the feature of getting the system state from acpi to deal with S0ix support. This was missed in previous commits, likely due to copy/paste from older code. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Libin Yang <libin.yang@intel.com> Signed-off-by:
-
Ranjani Sridharan authored
The patch "ASoC: SOF: Intel: hda: assign link DMA channel at run-time" fixed the sof_link_hda_unload() to remove the call to the BE hw_free op but left the rest of code that become redundant. So, remove sof_link_hda_unload() along with the link_unload() op entirely as it is not longer needed. Reported-by:
-
Libin Yang authored
It should be 'endif ## SND_SOC_SOF_PCI' instead of 'endif ## SND_SOC_SOF_INTEL_PCI' Signed-off-by:
-
Pierre-Louis Bossart authored
Replace ugly #if (!IS_ENABLED) by if (!IS_ENABLED), remove cross-module dependencies and use classic mechanism to pass information to the machine driver. Signed-off-by:
Daniel Baluta <daniel.baluta@gmail.com> Reviewed-by:
-
Pierre-Louis Bossart authored
In preparation of the nocodec refactoring, export the dai-link fixup. This will also be required when we have more clients and platform drivers. Signed-off-by:
-
Pierre-Louis Bossart authored
Add information for num_dai_drivers and dai_drivers[], which will be used in the refactored nocodec implementation Signed-off-by:
-
Pierre-Louis Bossart authored
To set additional parameters, we need to have access to sdev, not the plain vanilla struct device pointer. No functionality change. Signed-off-by:
-
Pierre-Louis Bossart authored
We currently have an ugly way of handling the SOF nocodec mode, with blatant violations between layers. To create the nocodec card, let's add two new fields and the existing mach_params structure, that way there will be no differences with regular cards. Signed-off-by:
-
Pierre-Louis Bossart authored
The probe workqueue is currently used in the HDaudio case, following the example of the snd-hda-intel driver. For development and validation, it's useful to enable the probe workqueue even with ACPI devices or NOCODEC mode. Signed-off-by:
-
Peter Ujfalusi authored
Set the sof_data->sof_probe_complete callback unconditionally of CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE. The sof_probe_complete will be called when the sof_probe_continue() function is successfully executed, called either directly from snd_sof_device_probe() or from the scheduled work. Since all error cases within the call chain of snd_sof_device_probe() have error prints, there is no need to print again in the acpi/pci/of level. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
-
Peter Ujfalusi authored
Two error cases in snd_sof_device_probe() and sof_probe_continue() are missing error prints. If either of them happens it is not possible to identify the reason for the failure. Add dev_err() prints for the cases to aim debugging. Signed-off-by:
-
- 09 Apr, 2021 13 commits
-
-
Vijendar Mukunda authored
Add ALC1015p codec support for acp3x machine driver. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/1617886984-9500-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210408062644.802988-1-yebin10@huawei.comSigned-off-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Jack Yu authored
Remove some registers to synchronize with the latest rt1019 datasheet. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/01e6409f0db0451aa1e45ca7d82cca9c@realtek.comSigned-off-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
Gyeongtaek Lee authored
If panic_on_warn=1 is added in bootargs and compress offload playback with DPCM is started, kernel panic would be occurred because rtd->card->pcm_mutex isn't held in soc_compr_open_fe() and soc_compr_free_fe() and it generates lockdep warning in the following code. void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd, int stream, int action) { struct snd_soc_dai *dai; int i; lockdep_assert_held(&rtd->card->pcm_mutex); To prevent lockdep warning but minimize side effect by adding mutex, pcm_mutex is held just before snd_soc_runtime_activate() and snd_soc_runtime_deactivate() and is released right after them. Signed-off-by:Gyeongtaek Lee <gt82.lee@samsung.com> Link: https://lore.kernel.org/r/1891546521.01617772502282.JavaMail.epsvc@epcpadp3Signed-off-by:
-
Ye Bin authored
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by:
-
- 08 Apr, 2021 1 commit
-
-
Mark Brown authored
Merge series "ASoC: simple-card-utils: prepare for multi support" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark I want to add new audio-graph-card2 driver which can support not only DPCM, but also Multi-CPU/Codec, and Codec2Codec. And it is also supporting audio-graph-card2 base custom driver. But before supporting such driver, we need to cleanup existing simple-card / audio-graph, because these and new driver are sharing code. This patch-set are for Multi-CPU/Codec support, and some cleanups. Kuninori Morimoto (14): ASoC: simple-card-utils: enable flexible CPU/Codec/Platform ASoC: simple-card-utils: share dummy DAI and reduce memory ASoC: simple-card-utils: setup dai_props cpu_dai/codec_dai at initial timing ASoC: simple-card-utils: remove li->dais/li->conf ASoC: simple-card-utils: use for_each_prop_xxx() ASoC: simple-card-utils: remove asoc_simple_parse_xxx() ASoC: simple-card-utils: care multi DAI at asoc_simple_clean_reference() ASoC: simple-card-utils: indicate dai_fmt if exist ASoC: simple-card-utils: indicate missing CPU/Codec numbers for debug ASoC: simple-card-utils: add simple_props_to_xxx() macro ASoC: simple-card-utils: multi support at asoc_simple_canonicalize_cpu/platform() ASoC: simple-card-utils: tidyup debug info for clock ASoC: simple-card-utils: tidyup dev_dbg() to use 1 line ASoC: simple-card-utils: tidyup asoc_simple_parse_convert() include/sound/simple_card_utils.h | 116 +++++++---- sound/soc/generic/audio-graph-card.c | 90 ++++----- sound/soc/generic/simple-card-utils.c | 272 +++++++++++++++++--------- sound/soc/generic/simple-card.c | 104 +++++----- 4 files changed, 352 insertions(+), 230 deletions(-) -- 2.25.1
-
