Further discussion here: http://marc.info/?l=linux-kernel&m=139073901101034&w=2

kbuild, 0day kernel build service, outputs the warning:

arch/x86/kernel/irq.c:333:1: warning: the frame size of 2056 bytes
is larger than 2048 bytes [-Wframe-larger-than=]

because check_irq_vectors_for_cpu_disable() allocates two cpumasks on the
stack.   Fix this by moving the two cpumasks to a global file context.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1390915331-27375-1-git-send-email-prarit@redhat.com
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Janet Morgan <janet.morgan@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ruiv Wang <ruiv.wang@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

This patch fixes the following warning:

  warning: (X86_INTEL_MID) selects INTEL_SCU_IPC which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && X86_INTEL_MID)

It happens because when selected, X86_INTEL_MID tries to select
INTEL_SCU_IPC regardless all its dependencies are met or not.

This patch fixes it by adding the missing X86_PLATFORM_DEVICES
dependency to X86_INTEL_MID.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1390329699-20782-1-git-send-email-david.a.cohen@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge in the x86 changes to apply a fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

When ACPI SLIT table has an I/O locality (i.e. a locality
unique to an I/O device), numa_set_distance() emits this warning
message:

 NUMA: Warning: node ids are out of bound, from=-1 to=-1 distance=10

acpi_numa_slit_init() calls numa_set_distance() with
pxm_to_node(), which assumes that all localities have been
parsed with SRAT previously.  SRAT does not list I/O localities,
where as SLIT lists all localities including I/Os.  Hence,
pxm_to_node() returns NUMA_NO_NODE (-1) for an I/O locality.

I/O localities are not supported and are ignored today, but emitting
such warning message leads to unnecessary confusion.

Change acpi_numa_slit_init() to avoid calling
numa_set_distance() with NUMA_NO_NODE.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/n/tip-dSvpjjvp8aMzs1ybkftxohlh@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

There was a large ebizzy performance regression that was
bisected to commit 611ae8e3 (x86/tlb: enable tlb flush range
support for x86).  The problem was related to the
tlb_flushall_shift tuning for IvyBridge which was altered.  The
problem is that it is not clear if the tuning values for each
CPU family is correct as the methodology used to tune the values
is unclear.

This patch uses a conservative tlb_flushall_shift value for all
CPU families except IvyBridge so the decision can be revisited
if any regression is found as a result of this change.
IvyBridge is an exception as testing with one methodology
determined that the value of 2 is acceptable.  Details are in
the changelog for the patch "x86: mm: Change tlb_flushall_shift
for IvyBridge".

One important aspect of this to watch out for is Xen.  The
original commit log mentioned large performance gains on Xen.
It's possible Xen is more sensitive to this value if it flushes
small ranges of pages more frequently than workloads on bare
metal typically do.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-dyzMww3fqugnhbhgo6Gxmtkw@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

There was a large performance regression that was bisected to
commit 611ae8e3 ("x86/tlb: enable tlb flush range support for
x86").  This patch simply changes the default balance point
between a local and global flush for IvyBridge.

In the interest of allowing the tests to be reproduced, this
patch was tested using mmtests 0.15 with the following
configurations

	configs/config-global-dhp__tlbflush-performance
	configs/config-global-dhp__scheduler-performance
	configs/config-global-dhp__network-performance

Results are from two machines

Ivybridge   4 threads:  Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz
Ivybridge   8 threads:  Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz

Page fault microbenchmark showed nothing interesting.

Ebizzy was configured to run multiple iterations and threads.
Thread counts ranged from 1 to NR_CPUS*2. For each thread count,
it ran 100 iterations and each iteration lasted 10 seconds.

Ivybridge 4 threads
                    3.13.0-rc7            3.13.0-rc7
                       vanilla           altshift-v3
Mean   1     6395.44 (  0.00%)     6789.09 (  6.16%)
Mean   2     7012.85 (  0.00%)     8052.16 ( 14.82%)
Mean   3     6403.04 (  0.00%)     6973.74 (  8.91%)
Mean   4     6135.32 (  0.00%)     6582.33 (  7.29%)
Mean   5     6095.69 (  0.00%)     6526.68 (  7.07%)
Mean   6     6114.33 (  0.00%)     6416.64 (  4.94%)
Mean   7     6085.10 (  0.00%)     6448.51 (  5.97%)
Mean   8     6120.62 (  0.00%)     6462.97 (  5.59%)

Ivybridge 8 threads
                     3.13.0-rc7            3.13.0-rc7
                        vanilla           altshift-v3
Mean   1      7336.65 (  0.00%)     7787.02 (  6.14%)
Mean   2      8218.41 (  0.00%)     9484.13 ( 15.40%)
Mean   3      7973.62 (  0.00%)     8922.01 ( 11.89%)
Mean   4      7798.33 (  0.00%)     8567.03 (  9.86%)
Mean   5      7158.72 (  0.00%)     8214.23 ( 14.74%)
Mean   6      6852.27 (  0.00%)     7952.45 ( 16.06%)
Mean   7      6774.65 (  0.00%)     7536.35 ( 11.24%)
Mean   8      6510.50 (  0.00%)     6894.05 (  5.89%)
Mean   12     6182.90 (  0.00%)     6661.29 (  7.74%)
Mean   16     6100.09 (  0.00%)     6608.69 (  8.34%)

Ebizzy hits the worst case scenario for TLB range flushing every
time and it shows for these Ivybridge CPUs at least that the
default choice is a poor on.  The patch addresses the problem.

Next was a tlbflush microbenchmark written by Alex Shi at
http://marc.info/?l=linux-kernel&m=133727348217113 .  It
measures access costs while the TLB is being flushed.  The
expectation is that if there are always full TLB flushes that
the benchmark would suffer and it benefits from range flushing

There are 320 iterations of the test per thread count.  The
number of entries is randomly selected with a min of 1 and max
of 512.  To ensure a reasonably even spread of entries, the full
range is broken up into 8 sections and a random number selected
within that section.

iteration 1, random number between 0-64
iteration 2, random number between 64-128 etc

This is still a very weak methodology.  When you do not know
what are typical ranges, random is a reasonable choice but it
can be easily argued that the opimisation was for smaller ranges
and an even spread is not representative of any workload that
matters.  To improve this, we'd need to know the probability
distribution of TLB flush range sizes for a set of workloads
that are considered "common", build a synthetic trace and feed
that into this benchmark.  Even that is not perfect because it
would not account for the time between flushes but there are
limits of what can be reasonably done and still be doing
something useful.  If a representative synthetic trace is
provided then this benchmark could be revisited and the shift values retuned.

Ivybridge 4 threads
                        3.13.0-rc7            3.13.0-rc7
                           vanilla           altshift-v3
Mean       1       10.50 (  0.00%)       10.50 (  0.03%)
Mean       2       17.59 (  0.00%)       17.18 (  2.34%)
Mean       3       22.98 (  0.00%)       21.74 (  5.41%)
Mean       5       47.13 (  0.00%)       46.23 (  1.92%)
Mean       8       43.30 (  0.00%)       42.56 (  1.72%)

Ivybridge 8 threads
                         3.13.0-rc7            3.13.0-rc7
                            vanilla           altshift-v3
Mean       1         9.45 (  0.00%)        9.36 (  0.93%)
Mean       2         9.37 (  0.00%)        9.70 ( -3.54%)
Mean       3         9.36 (  0.00%)        9.29 (  0.70%)
Mean       5        14.49 (  0.00%)       15.04 ( -3.75%)
Mean       8        41.08 (  0.00%)       38.73 (  5.71%)
Mean       13       32.04 (  0.00%)       31.24 (  2.49%)
Mean       16       40.05 (  0.00%)       39.04 (  2.51%)

For both CPUs, average access time is reduced which is good as
this is the benchmark that was used to tune the shift values in
the first place albeit it is now known *how* the benchmark was
used.

The scheduler benchmarks were somewhat inconclusive.  They
showed gains and losses and makes me reconsider how stable those
benchmarks really are or if something else might be interfering
with the test results recently.

Network benchmarks were inconclusive.  Almost all results were
flat except for netperf-udp tests on the 4 thread machine.
These results were unstable and showed large variations between
reboots.  It is unknown if this is a recent problems but I've
noticed before that netperf-udp results tend to vary.

Based on these results, changing the default for Ivybridge seems
like a logical choice.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Alex Shi <alex.shi@linaro.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-cqnadffh1tiqrshthRj3Esge@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

When choosing between doing an address space or ranged flush,
the x86 implementation of flush_tlb_mm_range takes into account
whether there are any large pages in the range.  A per-page
flush typically requires fewer entries than would covered by a
single large page and the check is redundant.

There is one potential exception.  THP migration flushes single
THP entries and it conceivably would benefit from flushing a
single entry instead of the mm.  However, this flush is after a
THP allocation, copy and page table update potentially with any
other threads serialised behind it.  In comparison to that, the
flush is noise.  It makes more sense to optimise balancing to
require fewer flushes than to optimise the flush itself.

This patch deletes the redundant huge page check.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-sgei1drpOcburujPsfh6ovmo@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

NR_TLB_LOCAL_FLUSH_ALL is not always accounted for correctly and
the comparison with total_vm is done before taking
tlb_flushall_shift into account.  Clean it up.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Alex Shi <alex.shi@linaro.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/n/tip-Iz5gcahrgskIldvukulzi0hh@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Bisection between 3.11 and 3.12 fingered commit 9824cf97 ("mm:
vmstats: tlb flush counters") to cause overhead problems.

The counters are undeniably useful but how often do we really
need to debug TLB flush related issues?  It does not justify
taking the penalty everywhere so make it a debugging option.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-XzxjntugxuwpxXhcrxqqh53b@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

This is under CAP_SYS_ADMIN, but Smatch complains that mask comes
from the user and the test for "mask > 0xf" can underflow.

The fix is simple: amd_set_subcaches() should hand down not an 'int'
but an 'unsigned long' like it was originally indended to do.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel J Blueman <daniel@numascale-asia.com>
Link: http://lkml.kernel.org/r/20140121072209.GA22095@elgon.mountainSigned-off-by: Ingo Molnar <mingo@kernel.org>

The workaround for this Erratum is included in AGESA. But BIOSes
spun only after Jan2014 will have the fix (atleast server
versions of the chip). The erratum affects both embedded and
server platforms and since we cannot say with certainity that
ALL BIOSes on systems out in the field will have the fix, we
should probably insulate ourselves in case BIOS does not do the
right thing or someone is using old BIOSes.

Refer to Revision Guide for AMD F16h models 00h-0fh, document 51810
Rev. 3.04, November2013 for details on the Erratum.

Tested the patch on Fam16h server platform and it works fine.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Cc: <hmh@hmh.eng.br>
Cc: <Kim.Naru@amd.com>
Cc: <Suravee.Suthikulpanit@amd.com>
Cc: <bp@suse.de>
Cc: <sherry.hurwitz@amd.com>
Link: http://lkml.kernel.org/r/1390515212-1824-1-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Minor edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull x32 uapi changes from Peter Anvin:
 "This is the first few of a set of patches by H.J.  Lu to make the
  kernel uapi headers usable for x32, as required by some non-glibc
  libcs.

  These particular patches make the stat and statfs structures usable"

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, x32: Use __kernel_long_t for __statfs_word
  x86, x32: Use __kernel_long_t/__kernel_ulong_t in x86-64 stat.h

Pull x86 cpufeature and mpx updates from Peter Anvin:
 "This includes the basic infrastructure for MPX (Memory Protection
  Extensions) support, but does not include MPX support itself.  It is,
  however, a prerequisite for KVM support for MPX, which I believe will
  be pushed later this merge window by the KVM team.

  This includes moving the functionality in
  futex_atomic_cmpxchg_inatomic() into a new function in uaccess.h so it
  can be reused - this will be used by the final MPX patches.

  The actual MPX functionality (map management and so on) will be pushed
  in a future merge window, when ready"

* 'x86/mpx' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel/mpx: Remove unused LWP structure
  x86, mpx: Add MPX related opcodes to the x86 opcode map
  x86: replace futex_atomic_cmpxchg_inatomic() with user_atomic_cmpxchg_inatomic
  x86: add user_atomic_cmpxchg_inatomic at uaccess.h
  x86, xsave: Support eager-only xsave features, add MPX support
  x86, cpufeature: Define the Intel MPX feature flag

Pull x86 kernel address space randomization support from Peter Anvin:
 "This enables kernel address space randomization for x86"

* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kaslr: Clarify RANDOMIZE_BASE_MAX_OFFSET
  x86, kaslr: Remove unused including <linux/version.h>
  x86, kaslr: Use char array to gain sizeof sanity
  x86, kaslr: Add a circular multiply for better bit diffusion
  x86, kaslr: Mix entropy sources together as needed
  x86/relocs: Add percpu fixup for GNU ld 2.23
  x86, boot: Rename get_flags() and check_flags() to *_cpuflags()
  x86, kaslr: Raise the maximum virtual address to -1 GiB on x86_64
  x86, kaslr: Report kernel offset on panic
  x86, kaslr: Select random position from e820 maps
  x86, kaslr: Provide randomness functions
  x86, kaslr: Return location from decompress_kernel
  x86, boot: Move CPU flags out of cpucheck
  x86, relocs: Add more per-cpu gold special cases

Pull leftover x86 fixes from Ingo Molnar:
 "Two leftover fixes that did not make it into v3.13"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Add check for number of available vectors before CPU down
  x86, cpu, amd: Add workaround for family 16h, erratum 793

Pull x86 RAS changes from Ingo Molnar:

 - SCI reporting for other error types not only correctable ones

 - GHES cleanups

 - Add the functionality to override error reporting agents as some
   machines are sporting a new extended error logging capability which,
   if done properly in the BIOS, makes a corresponding EDAC module
   redundant

 - PCIe AER tracepoint severity levels fix

 - Error path correction for the mce device init

 - MCE timer fix

 - Add more flexibility to the error injection (EINJ) debugfs interface

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, mce: Fix mce_start_timer semantics
  ACPI, APEI, GHES: Cleanup ghes memory error handling
  ACPI, APEI: Cleanup alignment-aware accesses
  ACPI, APEI, GHES: Do not report only correctable errors with SCI
  ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
  ACPI, eMCA: Combine eMCA/EDAC event reporting priority
  EDAC, sb_edac: Modify H/W event reporting policy
  EDAC: Add an edac_report parameter to EDAC
  PCI, AER: Fix severity usage in aer trace event
  x86, mce: Call put_device on device_register failure

Pull Intel SoC changes from Ingo Molnar:
 "Improved Intel SoC platform support"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, tsc, apic: Unbreak static (MSR) calibration when CONFIG_X86_LOCAL_APIC=n
  x86, tsc: Add static (MSR) TSC calibration on Intel Atom SoCs
  arch: x86: New MailBox support driver for Intel SOC's

Pull x86 mm changes from Ingo Molnar:
 "A cleanup, a fix and ASLR support for hugetlb mappings"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/numa: Fix 32-bit kernel NUMA boot
  x86/mm: Implement ASLR for hugetlb mappings
  x86/mm: Unify pte_to_pgoff() and pgoff_to_pte() helpers

Pull x86 microcode loader updates from Ingo Molnar:
 "There are two main changes in this tree:

   - AMD microcode early loading fixes
   - some microcode loader source files reorganization"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Move to a proper location
  x86, microcode, AMD: Fix early ucode loading
  x86, microcode: Share native MSR accessing variants
  x86, ramdisk: Export relocated ramdisk VA

Pull Intel MID updates from Ingo Molnar:
 "This tree improves Intel MID (Mobile Internet Device) platform
  support:

   - Merrifield platform support (David Cohen)
   - Clovertrail platform support (Kuppuswamy Sathyanarayanan)
   - Various cleanups and fixes (David Cohen)"

* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, intel_mid: Replace memcpy with struct assignment
  x86, intel-mid: Return proper error code from get_gpio_by_name()
  x86, intel-mid: Check get_gpio_by_name() error code on platform code
  x86, intel-mid: sfi_handle_*_dev() should check for pdata error code
  x86, intel-mid: Remove deprecated X86_MDFLD and X86_WANT_INTEL_MID configs
  x86, intel-mid: Add Merrifield platform support
  x86, intel-mid: Add Clovertrail platform support
  x86, intel-mid: Move Medfield code out of intel-mid.c core file

Pull x86 EFI changes from Ingo Molnar:
 "This consists of two main parts:

   - New static EFI runtime services virtual mapping layout which is
     groundwork for kexec support on EFI (Borislav Petkov)

   - EFI kexec support itself (Dave Young)"

* 'x86-efi-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/efi: parse_efi_setup() build fix
  x86: ksysfs.c build fix
  x86/efi: Delete superfluous global variables
  x86: Reserve setup_data ranges late after parsing memmap cmdline
  x86: Export x86 boot_params to sysfs
  x86: Add xloadflags bit for EFI runtime support on kexec
  x86/efi: Pass necessary EFI data for kexec via setup_data
  efi: Export EFI runtime memory mapping to sysfs
  efi: Export more EFI table variables to sysfs
  x86/efi: Cleanup efi_enter_virtual_mode() function
  x86/efi: Fix off-by-one bug in EFI Boot Services reservation
  x86/efi: Add a wrapper function efi_map_region_fixed()
  x86/efi: Remove unused variables in __map_region()
  x86/efi: Check krealloc return value
  x86/efi: Runtime services virtual mapping
  x86/mm/cpa: Map in an arbitrary pgd
  x86/mm/pageattr: Add last levels of error path
  x86/mm/pageattr: Add a PUD error unwinding path
  x86/mm/pageattr: Add a PTE pagetable populating function
  x86/mm/pageattr: Add a PMD pagetable populating function
  ...

Pull x86 TLB detection update from Ingo Molnar:
 "A single change that extends our TLB cache size detection+reporting
  code"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu: Detect more TLB configuration

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu, amd: Fix a shadowed variable situation
  um, x86: Fix vDSO build
  x86: Delete non-required instances of include <linux/init.h>
  x86, realmode: Pointer walk cleanups, pull out invariant use of __pa()
  x86/traps: Clean up error exception handler definitions

Pull x86/build changes from Ingo Molnar:
 "Misc smaller improvements"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Move intcall() to the .inittext section
  x86, boot: Use .code16 instead of .code16gcc
  x86, sparse: Do not force removal of __user when calling copy_to/from_user_nocheck()

Pull x86/asm changes from Ingo Molnar:
 "Misc optimizations"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Slightly tweak the access_ok() C variant for better code
  x86: Replace assembly access_ok() with a C variant
  x86-64, copy_user: Use leal to produce 32-bit results
  x86-64, copy_user: Remove zero byte check before copy user buffer.

Pull x86/apic changes from Ingo Molnar:
 "Two main changes:

   - improve local APIC Error Status Register reporting robustness

   - add the 'disable_cpu_apicid=x' boot parameter for kexec booting"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, apic: Make disabled_cpu_apicid static read_mostly, fix typos
  x86, apic, kexec: Add disable_cpu_apicid kernel parameter
  x86/apic: Read Error Status Register correctly

Pull timer changes from Ingo Molnar:
  - ARM clocksource/clockevent improvements and fixes
  - generic timekeeping updates: TAI fixes/improvements, cleanups
  - Posix cpu timer cleanups and improvements
  - dynticks updates: full dynticks bugfixes, optimizations and cleanups

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  clocksource: Timer-sun5i: Switch to sched_clock_register()
  timekeeping: Remove comment that's mostly out of date
  rtc-cmos: Add an alarm disable quirk
  timekeeper: fix comment typo for tk_setup_internals()
  timekeeping: Fix missing timekeeping_update in suspend path
  timekeeping: Fix CLOCK_TAI timer/nanosleep delays
  tick/timekeeping: Call update_wall_time outside the jiffies lock
  timekeeping: Avoid possible deadlock from clock_was_set_delayed
  timekeeping: Fix potential lost pv notification of time change
  timekeeping: Fix lost updates to tai adjustment
  clocksource: sh_cmt: Add clk_prepare/unprepare support
  clocksource: bcm_kona_timer: Remove unused bcm_timer_ids
  clocksource: vt8500: Remove deprecated IRQF_DISABLED
  clocksource: tegra: Remove deprecated IRQF_DISABLED
  clocksource: misc drivers: Remove deprecated IRQF_DISABLED
  clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()
  clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()
  clocksource: armada-370-xp: Enable timer divider only when needed
  clocksource: clksrc-of: Warn if no clock sources are found
  clocksource: orion: Switch to sched_clock_register()
  ...

We don't support LWP yet, don't give the impression that we do:
represent the LWP state as opaque 128 bytes, the way Linux sees it
currently.

Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-ecarmjtfKpanpAapfck6dj6g@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull scheduler changes from Ingo Molnar:

 - Add the initial implementation of SCHED_DEADLINE support: a real-time
   scheduling policy where tasks that meet their deadlines and
   periodically execute their instances in less than their runtime quota
   see real-time scheduling and won't miss any of their deadlines.
   Tasks that go over their quota get delayed (Available to privileged
   users for now)

 - Clean up and fix preempt_enable_no_resched() abuse all around the
   tree

 - Do sched_clock() performance optimizations on x86 and elsewhere

 - Fix and improve auto-NUMA balancing

 - Fix and clean up the idle loop

 - Apply various cleanups and fixes

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  sched: Fix __sched_setscheduler() nice test
  sched: Move SCHED_RESET_ON_FORK into attr::sched_flags
  sched: Fix up attr::sched_priority warning
  sched: Fix up scheduler syscall LTP fails
  sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls
  sched/core: Fix htmldocs warnings
  sched/deadline: No need to check p if dl_se is valid
  sched/deadline: Remove unused variables
  sched/deadline: Fix sparse static warnings
  m68k: Fix build warning in mac_via.h
  sched, thermal: Clean up preempt_enable_no_resched() abuse
  sched, net: Fixup busy_loop_us_clock()
  sched, net: Clean up preempt_enable_no_resched() abuse
  sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding
  sched/preempt, locking: Rework local_bh_{dis,en}able()
  sched/clock, x86: Avoid a runtime condition in native_sched_clock()
  sched/clock: Fix up clear_sched_clock_stable()
  sched/clock, x86: Use a static_key for sched_clock_stable
  sched/clock: Remove local_irq_disable() from the clocks
  sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs
  ...

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Add Intel RAPL energy counter support (Stephane Eranian)
   - Clean up uprobes (Oleg Nesterov)
   - Optimize ring-buffer writes (Peter Zijlstra)

  Tooling side changes, user visible:

   - 'perf diff':
     - Add column colouring improvements (Ramkumar Ramachandra)

  - 'perf kvm':
     - Add guest related improvements, including allowing to specify a
       directory with guest specific /proc information (Dongsheng Yang)
     - Add shell completion support (Ramkumar Ramachandra)
     - Add '-v' option (Dongsheng Yang)
     - Support --guestmount (Dongsheng Yang)

   - 'perf probe':
     - Support showing source code, asking for variables to be collected
       at probe time and other 'perf probe' operations that use DWARF
       information.

       This supports only binaries with debugging information at this
       time, detached debuginfo (aka debuginfo packages) support should
       come in later patches (Masami Hiramatsu)

   - 'perf record':
     - Rename --no-delay option to --no-buffering, better reflecting its
       purpose and freeing up '--delay' to take the place of
       '--initial-delay', so that 'record' and 'stat' are consistent
       (Arnaldo Carvalho de Melo)
     - Default the -t/--thread option to no inheritance (Adrian Hunter)
     - Make per-cpu mmaps the default (Adrian Hunter)

   - 'perf report':
     - Improve callchain processing performance (Frederic Weisbecker)
     - Retain bfd reference to lookup source line numbers, greatly
       optimizing, among other use cases, 'perf report -s srcline'
       (Adrian Hunter)
     - Improve callchain processing performance even more (Namhyung Kim)
     - Add a perf.data file header window in the 'perf report' TUI,
       associated with the 'i' hotkey, providing a counterpart to the
       --header option in the stdio UI (Namhyung Kim)

   - 'perf script':
     - Add an option in 'perf script' to print the source line number
       (Adrian Hunter)
     - Add --header/--header-only options to 'script' and 'report', the
       default is not tho show the header info, but as this has been the
       default for some time, leave a single line explaining how to
       obtain that information (Jiri Olsa)
     - Add options to show comm, fork, exit and mmap PERF_RECORD_ events
       (Namhyung Kim)
     - Print callchains and symbols if they exist (David Ahern)

   - 'perf timechart'
     - Add backtrace support to CPU info
     - Print pid along the name
     - Add support for CPU topology
     - Add new option --highlight'ing threads, be it by name or, if a
       numeric value is provided, that run more than given duration
       (Stanislav Fomichev)

   - 'perf top':
     - Make 'perf top -g' refer to callchains, for consistency with
       other tools (David Ahern)

   - 'perf trace':
     - Handle old kernels where the "raw_syscalls" tracepoints were
       called plain "syscalls" (David Ahern)
     - Remove thread summary coloring, by Pekka Enberg.
     - Honour -m option in 'trace', the tool was offering the option to
       set the mmap size, but wasn't using it when doing the actual mmap
       on the events file descriptors (Jiri Olsa)

   - generic:
     - Backport libtraceevent plugin support (trace-cmd repository, with
       plugins for jbd2, hrtimer, kmem, kvm, mac80211, sched_switch,
       function, xen, scsi, cfg80211 (Jiri Olsa)
     - Print session information only if --stdio is given (Namhyung Kim)

  Tooling side changes, developer visible (plumbing):

   - Improve 'perf probe' exit path, release resources (Masami
     Hiramatsu)
   - Improve libtraceevent plugins exit path, allowing the registering
     of an unregister handler to be called at exit time (Namhyung Kim)
   - Add an alias to the build test makefile (make -C tools/perf
     build-test) (Namhyung Kim)
   - Get rid of die() and friends (good riddance!) in libtraceevent
     (Namhyung Kim)
   - Fix cross build problems related to pkgconfig and CROSS_COMPILE not
     being propagated to the feature tests, leading to features being
     tested in the host and then being enabled on the target (Mark
     Rutland)
   - Improve forked workload error reporting by sending the errno in the
     signal data queueing integer field, using sigqueue and by doing the
     signal setup in the evlist methods, removing open coded equivalents
     in various tools (Arnaldo Carvalho de Melo)
   - Do more auto exit cleanup chores in the 'evlist' destructor, so
     that the tools don't have to all do that sequence (Arnaldo Carvalho
     de Melo)
   - Pack 'struct perf_session_env' and 'struct trace' (Arnaldo Carvalho
     de Melo)
   - Add test for building detached source tarballs (Arnaldo Carvalho de
     Melo)
   - Move some header files (tools/perf/ to tools/include/ to make them
     available to other tools/ dwelling codebases (Namhyung Kim)
   - Move logic to warn about kptr_restrict'ed kernels to separate
     function in 'report' (Arnaldo Carvalho de Melo)
   - Move hist browser selection code to separate function (Arnaldo
     Carvalho de Melo)
   - Move histogram entries collapsing to separate function (Arnaldo
     Carvalho de Melo)
   - Introduce evlist__for_each() & friends (Arnaldo Carvalho de Melo)
   - Automate setup of FEATURE_CHECK_(C|LD)FLAGS-all variables (Jiri
     Olsa)
   - Move arch setup into seprate Makefile (Jiri Olsa)
   - Make libtraceevent install target quieter (Jiri Olsa)
   - Make tests/make output more compact (Jiri Olsa)
   - Ignore generated files in feature-checks (Chunwei Chen)
   - Introduce pevent_filter_strerror() in libtraceevent, similar in
     purpose to libc's strerror() function (Namhyung Kim)
   - Use perf_data_file methods to write output file in 'record' and
     'inject' (Jiri Olsa)
   - Use pr_*() functions where applicable in 'report' (Namhyumg Kim)
   - Add 'machine' 'addr_location' struct to have full picture (machine,
     thread, map, symbol, addr) for a (partially) resolved address,
     reducing function signatures (Arnaldo Carvalho de Melo)
   - Reduce code duplication in the histogram entry creation/insertion
     (Arnaldo Carvalho de Melo)
   - Auto allocate annotation histogram data structures (Arnaldo
     Carvalho de Melo)
   - No need to test against NULL before calling free, also set freed
     memory in struct pointers to NULL, to help fixing use after free
     bugs (Arnaldo Carvalho de Melo)
   - Rename some struct DSO binary_type related members and methods, to
     clarify its purpose and need for differentiation (symtab_type, ie
     one is about the files .text, CFI, etc, i.e.  its binary contents,
     and the other is about where the symbol table came from (Arnaldo
     Carvalho de Melo)
   - Convert to new topic libraries, starting with an API one (sysfs,
     debugfs, etc), renaming liblk in the process (Borislav Petkov)
   - Get rid of some more panic() like error handling in libtraceevent.
     (Namhyung Kim)
   - Get rid of panic() like calls in libtraceevent (Namyung Kim)
   - Start carving out symbol parsing routines (perf, just moving
     routines to topic files in tools/lib/symbol/, tools that want to
     use it need to integrate it directly, ie no
     tools/lib/symbol/Makefile is provided (Arnaldo Carvalho de Melo)
   - Assorted refactoring patches, moving code around and adding utility
     evlist methods that will be used in the IPT patchset (Adrian
     Hunter)
   - Assorted mmap_pages handling fixes (Adrian Hunter)
   - Several man pages typo fixes (Dongsheng Yang)
   - Get rid of several die() calls in libtraceevent (Namhyung Kim)
   - Use basename() in a more robust way, to avoid problems related to
     different system library implementations for that function
     (Stephane Eranian)
   - Remove open coded management of short_name_allocated member (Adrian
     Hunter)
   - Several cleanups in the "dso" methods, constifying some parameters
     and renaming some fields to clarify its purpose (Arnaldo Carvalho
     de Melo)
   - Add per-feature check flags, fixing libunwind related build
     problems on some architectures (Jean Pihet)
   - Do not disable source line lookup just because of one failure.
     (Adrian Hunter)
   - Several 'perf kvm' man page corrections (Dongsheng Yang)
   - Correct the message in feature-libnuma checking, swowing the right
     devel package names for various distros (Dongsheng Yang)
   - Polish 'readn()' function and introduce its counterpart,
     'writen()' (Jiri Olsa)
   - Start moving timechart state from global variables to a 'perf_tool'
     derived 'timechart' struct (Arnaldo Carvalho de Melo)

  ... and lots of fixes and improvements I forgot to list"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (282 commits)
  perf tools: Remove unnecessary callchain cursor state restore on unmatch
  perf callchain: Spare double comparison of callchain first entry
  perf tools: Do proper comm override error handling
  perf symbols: Export elf_section_by_name and reuse
  perf probe: Release all dynamically allocated parameters
  perf probe: Release allocated probe_trace_event if failed
  perf tools: Add 'build-test' make target
  tools lib traceevent: Unregister handler when xen plugin is unloaded
  tools lib traceevent: Unregister handler when scsi plugin is unloaded
  tools lib traceevent: Unregister handler when jbd2 plugin is is unloaded
  tools lib traceevent: Unregister handler when cfg80211 plugin is unloaded
  tools lib traceevent: Unregister handler when mac80211 plugin is unloaded
  tools lib traceevent: Unregister handler when sched_switch plugin is unloaded
  tools lib traceevent: Unregister handler when kvm plugin is unloaded
  tools lib traceevent: Unregister handler when kmem plugin is unloaded
  tools lib traceevent: Unregister handler when hrtimer plugin is unloaded
  tools lib traceevent: Unregister handler when function plugin is unloaded
  tools lib traceevent: Add pevent_unregister_print_function()
  tools lib traceevent: Add pevent_unregister_event_handler()
  tools lib traceevent: fix pointer-integer size mismatch
  ...

Pull IRQ changes from Ingo Molnar:
 "The only change in this cycle is a CPU hotplug related spurious
  warning fix"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Fix kbuild warning in smp_irq_move_cleanup_interrupt()
  x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs

Merge branch 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull strong stackprotector support from Ingo Molnar:
 "This tree adds a CONFIG_CC_STACKPROTECTOR_STRONG=y, a new, stronger
  stack canary checking method supported by the newest GCC versions (4.9
  and later).

  Here's the 'intensity comparison' between the various protection
  modes:

      - defconfig
        11430641 kernel text size
        36110 function bodies

      - defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
        11468490 kernel text size (+0.33%)
        1015 of 36110 functions are stack-protected (2.81%)

      - defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
        11692790 kernel text size (+2.24%)
        7401 of 36110 functions are stack-protected (20.5%)

  the strong model comes with non-trivial costs, which is why we
  preserved the 'regular' and 'none' models as well"

* 'core-stackprotector-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG
  stackprotector: Unify the HAVE_CC_STACKPROTECTOR logic between architectures

Pull RCU updates from Ingo Molnar:
 - add RCU torture scripts/tooling
 - static analysis improvements
 - update RCU documentation
 - miscellaneous fixes

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  rcu: Remove "extern" from function declarations in kernel/rcu/rcu.h
  rcu: Remove "extern" from function declarations in include/linux/*rcu*.h
  rcu/torture: Dynamically allocate SRCU output buffer to avoid overflow
  rcu: Don't activate RCU core on NO_HZ_FULL CPUs
  rcu: Warn on allegedly impossible rcu_read_unlock_special() from irq
  rcu: Add an RCU_INITIALIZER for global RCU-protected pointers
  rcu: Make rcu_assign_pointer's assignment volatile and type-safe
  bonding: Use RCU_INIT_POINTER() for better overhead and for sparse
  rcu: Add comment on evaluate-once properties of rcu_assign_pointer().
  rcu: Provide better diagnostics for blocking in RCU callback functions
  rcu: Improve SRCU's grace-period comments
  rcu: Fix CONFIG_RCU_FANOUT_EXACT for odd fanout/leaf values
  rcu: Fix coccinelle warnings
  rcutorture: Stop tracking FSF's postal address
  rcutorture: Move checkarg to functions.sh
  rcutorture: Flag errors and warnings with color coding
  rcutorture: Record results from repeated runs of the same test scenario
  rcutorture: Test summary at end of run with less chattiness
  rcutorture: Update comment in kvm.sh listing typical RCU trace events
  rcutorture: Add tracing-enabled version of TREE08
  ...

Pull core locking changes from Ingo Molnar:
 - futex performance increases: larger hashes, smarter wakeups
 - mutex debugging improvements
 - lots of SMP ordering documentation updates
 - introduce the smp_load_acquire(), smp_store_release() primitives.
   (There are WIP patches that make use of them - not yet merged)
 - lockdep micro-optimizations
 - lockdep improvement: better cover IRQ contexts
 - liblockdep at last. We'll continue to monitor how useful this is

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  futexes: Fix futex_hashsize initialization
  arch: Re-sort some Kbuild files to hopefully help avoid some conflicts
  futexes: Avoid taking the hb->lock if there's nothing to wake up
  futexes: Document multiprocessor ordering guarantees
  futexes: Increase hash table size for better performance
  futexes: Clean up various details
  arch: Introduce smp_load_acquire(), smp_store_release()
  arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h
  arch: Move smp_mb__{before,after}_atomic_{inc,dec}.h into asm/atomic.h
  locking/doc: Rename LOCK/UNLOCK to ACQUIRE/RELEASE
  mutexes: Give more informative mutex warning in the !lock->owner case
  powerpc: Full barrier for smp_mb__after_unlock_lock()
  rcu: Apply smp_mb__after_unlock_lock() to preserve grace periods
  Documentation/memory-barriers.txt: Downgrade UNLOCK+BLOCK
  locking: Add an smp_mb__after_unlock_lock() for UNLOCK+BLOCK barrier
  Documentation/memory-barriers.txt: Document ACCESS_ONCE()
  Documentation/memory-barriers.txt: Prohibit speculative writes
  Documentation/memory-barriers.txt: Add long atomic examples to memory-barriers.txt
  Documentation/memory-barriers.txt: Add needed ACCESS_ONCE() calls to memory-barriers.txt
  Revert "smp/cpumask: Make CONFIG_CPUMASK_OFFSTACK=y usable without debug dependency"
  ...

Pull core debug changes from Ingo Molnar:
 "Currently there are two methods to set the panic_timeout: via
  'panic=X' boot commandline option, or via /proc/sys/kernel/panic.

  This tree adds a third panic_timeout configuration method:
  configuration via Kconfig, via CONFIG_PANIC_TIMEOUT=X - useful to
  distros that generally want their kernel defaults to come with the
  .config.

  CONFIG_PANIC_TIMEOUT defaults to 0, which was the previous default
  value of panic_timeout.

  Doing that unearthed a few arch trickeries regarding arch-special
  panic_timeout values and related complications - hopefully all
  resolved to the satisfaction of everyone"

* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  powerpc: Clean up panic_timeout usage
  MIPS: Remove panic_timeout settings
  panic: Make panic_timeout configurable

The actual data lives in the Intel download center, and that ought to also
be a reliable way to continue to find it. Unfortunately the actual URL
needed for doing it directly is about a foot long so give instructions.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20140120180056.7173.62222.stgit@alan.etchedpixels.co.ukSigned-off-by: H. Peter Anvin <hpa@zytor.com>

Pull ktest updates from Steven Rostedt:
 "Here's some basic updates to ktest.pl.  They include:

   - add config to modify the signal to terminate console
   - update to documentation (missing some config options)
   - add KERNEL_VERSION variable to use for other configs
   - add '=~' to let configs eval other configs
   - add BISECT_TRIES to run multiple tests per git bisect good"

* tag 'ktest-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add BISECT_TRIES to bisect test
  ktest: Add eval '=~' command to modify variables in config file
  ktest: Add special variable ${KERNEL_VERSION}
  ktest: Add documentation of CLOSE_CONSOLE_SIGNAL
  ktest: Make the signal to terminate the console configurable

Merge tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig

Pull localmodconfig update from Steven Rostedt:
 "While debugging the problem with localmodconfig and the ALSA codec
  modules all being set, I discovered a small bug in the dependency
  logic.

  If a config has a dependency based on its setting value,
  localmodcondig misses it.

  For example:

    config FOO
        default y if BAR || ZOO

  If FOO is needed for a module and is set to '=m', and so are BAR or
  ZOO, localmodconfig will not see that BAR or ZOO are also needed for
  the foo module, and will incorrectly disable them"

* tag 'localmodconfig-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
  localmodconfig: Add config depends by default settings

Pull hwmon updates from Guenter Roeck:
 "Add support for Kaveri CPUs to k10temp driver.  Add support for S12x0
  to coretemp driver.

  Cleanup and minor fixes in several drivers.  Notable are 'Do not
  return -EAGAIN for low temperatures' to coretemp and 'Re-enable
  logical device mapping for NCT6791 during resume' to nct6775.  Both
  will be sent to -stable, but only after some time in mainline"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (k10temp) Add support for Kaveri CPUs
  hwmon: (sht15) add include guard
  hwmon: (max197) add include guard
  hwmon: (nct6775) Re-enable logical device mapping for NCT6791 during resume
  hwmon: (s3c) Trivial cleanup in hwmon-s3c.h
  hwmon: (coretemp) Do not return -EAGAIN for low temperatures
  hwmon: (da9052) Fix adc to voltage calculation
  hwmon: (coretemp) Refine TjMax detection
  hwmon: (coretemp) Add PCI device ID for CE41x0 CPUs
  hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary
  hwmon: remove DEFINE_PCI_DEVICE_TABLE macro

Pull ia64 Xen removal from Tony Luck:
 "Nobody has been maintaining xen in ia64 for a long time.  Rip it all
  out so people do not waste time making updates to broken/dead code"

* tag 'please-pull-rm_xen' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64/xen: Remove Xen support for ia64