Pull tty / serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.11-rc4 to
  resolve some reported problems. Included in here are:

   - conmakehash.c userspace build issues

   - fsl_lpuart driver fix

   - 8250_omap revert for reported regression

   - atmel_serial rts flag fix

  All of these have been in linux-next this week with no reported
  issues"

* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
  tty: atmel_serial: use the correct RTS flag.
  tty: vt: conmakehash: remove non-portable code printing comment header
  tty: serial: fsl_lpuart: mark last busy before uart_add_one_port

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
  resolve some reported issues. Included in here are:

   - thunderbolt driver fixes for reported problems

   - typec driver fixes

   - xhci fixes

   - new device id for ljca usb driver

  All of these have been in linux-next this week with no reported
  issues"

* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
  usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
  Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
  usb: typec: ucsi: Fix the return value of ucsi_run_command()
  usb: xhci: fix duplicate stall handling in handle_tx_event()
  usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
  thunderbolt: Mark XDomain as unplugged when router is removed
  thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()

Pull more btrfs fixes from David Sterba:
 "A more fixes. We got reports that shrinker added in 6.10 still causes
  latency spikes and the fixes don't handle all corner cases. Due to
  summer holidays we're taking a shortcut to disable it for release
  builds and will fix it in the near future.

   - only enable extent map shrinker for DEBUG builds, temporary quick
     fix to avoid latency spikes for regular builds

   - update target inode's ctime on unlink, mandated by POSIX

   - properly take lock to read/update block group's zoned variables

   - add counted_by() annotations"

* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: only enable extent map shrinker for DEBUG builds
  btrfs: zoned: properly take lock to read/update block group's zoned variables
  btrfs: tree-checker: add dev extent item checks
  btrfs: update target inode's ctime on unlink
  btrfs: send: annotate struct name_cache_entry with __counted_by()

fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).

So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.

The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().

This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).

Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f25 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes. All except one are for MM. 10 of these are cc:stable and
  the others pertain to post-6.10 issues.

  As usual with these merges, singletons and doubletons all over the
  place, no identifiable-by-me theme. Please see the lovingly curated
  changelogs to get the skinny"

* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/migrate: fix deadlock in migrate_pages_batch() on large folios
  alloc_tag: mark pages reserved during CMA activation as not tagged
  alloc_tag: introduce clear_page_tag_ref() helper function
  crash: fix riscv64 crash memory reserve dead loop
  selftests: memfd_secret: don't build memfd_secret test on unsupported arches
  mm: fix endless reclaim on machines with unaccepted memory
  selftests/mm: compaction_test: fix off by one in check_compaction()
  mm/numa: no task_numa_fault() call if PMD is changed
  mm/numa: no task_numa_fault() call if PTE is changed
  mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
  mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
  mm: don't account memmap per-node
  mm: add system wide stats items category
  mm: don't account memmap on failure
  mm/hugetlb: fix hugetlb vs. core-mm PT locking
  mseal: fix is_madv_discard()

Pull powerpc fixes from Michael Ellerman:

 - Fix crashes on 85xx with some configs since the recent hugepd rework.

 - Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
   platforms.

 - Don't enable offline cores when changing SMT modes, to match existing
   userspace behaviour.

Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.

* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/topology: Check if a core is online
  cpu/SMT: Enable SMT only if a core is online
  powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
  powerpc/mm: Fix size of allocated PGDIR
  soc: fsl: qbman: remove unused struct 'cgr_comp'

Pull smb client fixes from Steve French:

 - fix for clang warning - additional null check

 - fix for cached write with posix locks

 - flexible structure fix

* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: smb2pdu.h: Use static_assert() to check struct sizes
  smb3: fix lock breakage for cached writes
  smb/client: avoid possible NULL dereference in cifs_free_subrequest()

Pull i2c fixes from Wolfram Sang:
 "I2C core fix replacing IS_ENABLED() with IS_REACHABLE()

  For host drivers, there are two fixes:

   - Tegra I2C Controller: Addresses a potential double-locking issue
     during probe. ACPI devices are not IRQ-safe when invoking runtime
     suspend and resume functions, so the irq_safe flag should not be
     set.

   - Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
     of the runtime_resume() function, which was missed in the previous
     release"

* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: tegra: Do not mark ACPI devices as irq safe
  i2c: Use IS_REACHABLE() for substituting empty ACPI functions
  i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume

Pull SCSI fixes from James Bottomley:
 "Two small fixes to the mpi3mr driver. One to avoid oversize
  allocations in tracing and the other to fix an uninitialized spinlock
  in the user to driver feature request code (used to trigger dumps and
  the like)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
  scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock

Pull xfs fixes from Chandan Babu:

 - Check for presence of only 'attr' feature before scrubbing an inode's
   attribute fork.

 - Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
   long (i.e. 50ms) sleep durations to prevent high load averages.

 - Do not allow users to change the realtime flag of a file unless the
   datadev and rtdev both support fsdax access modes.

* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
  xfs: revert AIL TASK_KILLABLE threshold
  xfs: attr forks require attr, not attr2

Pull bcachefs fixes from Kent OverstreetL

 - New on disk format version, bcachefs_metadata_version_disk_accounting_inum

   This adds one more disk accounting counter, which counts disk usage
   and number of extents per inode number. This lets us track
   fragmentation, for implementing defragmentation later, and it also
   counts disk usage per inode in all snapshots, which will be a useful
   thing to expose to users.

 - One performance issue we've observed is threads spinning when they
   should be waiting for dirty keys in the key cache to be flushed by
   journal reclaim, so we now have hysteresis for the waiting thread, as
   well as improving the tracepoint and a new time_stat, for tracking
   time blocked waiting on key cache flushing.

... and various assorted smaller fixes.

* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
  bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
  bcachefs: fix incorrect i_state usage
  bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
  bcachefs: Fix forgetting to pass trans to fsck_err()
  bcachefs: Increase size of cuckoo hash table on too many rehashes
  bcachefs: bcachefs_metadata_version_disk_accounting_inum
  bcachefs: Kill __bch2_accounting_mem_mod()
  bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
  bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
  bcachefs: Add a time_stat for blocked on key cache flush
  bcachefs: Improve trans_blocked_journal_reclaim tracepoint
  bcachefs: Add hysteresis to waiting on btree key cache flush
  lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
  bcachefs: Convert for_each_btree_node() to lockrestart_do()
  bcachefs: Add missing downgrade table entry
  bcachefs: disk accounting: ignore unknown types
  bcachefs: bch2_accounting_invalid() fixup
  bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
  bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()

We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull memcg-v1 fix from Al Viro:
 "memcg_write_event_control() oops fix"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  memcg_write_event_control(): fix a user-triggerable oops

Pull arm64 fixes from Catalin Marinas:

 - Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
   macro instead of the *_ERR() one in order to avoid writing -EFAULT to
   the value register in case of a fault

 - Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
   Prior to this fix, only the first element was initialised

 - Move the KASAN random tag seed initialisation after the per-CPU areas
   have been initialised (prng_state is __percpu)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix KASAN random tag seed initialization
  arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  arm64: uaccess: correct thinko in __get_mem_asm()

Pull clk fix from Stephen Boyd:
 "One fix for the new T-Head TH1520 clk driver that marks a bus clk
  critical so that it isn't turned off during late init which breaks
  emmc-sdio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: thead: fix dependency on clk_ignore_unused

Pull block fixes from Jens Axboe:

 - Fix corruption issues with s390/dasd (Eric, Stefan)

 - Fix a misuse of non irq locking grab of a lock (Li)

 - MD pull request with a single data corruption fix for raid1 (Yu)

* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
  block: Fix lockdep warning in blk_mq_mark_tag_wait
  md/raid1: Fix data corruption for degraded array with slow disk
  s390/dasd: fix error recovery leading to data corruption on ESE devices
  s390/dasd: Remove DMA alignment

Pull io_uring fixes from Jens Axboe:

 - Fix a comment in the uapi header using the wrong member name (Caleb)

 - Fix KCSAN warning for a debug check in sqpoll (me)

 - Two more NAPI tweaks (Olivier)

* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
  io_uring: fix user_data field name in comment
  io_uring/sqpoll: annotate debug task == current with data_race()
  io_uring/napi: remove duplicate io_napi_entry timeout assignation
  io_uring/napi: check napi_enabled in io_napi_add() before proceeding

Pull devicetree fixes from Rob Herring:

 - Fix a possible (but unlikely) out-of-bounds read in interrupts
   parsing code

 - Add AT25 EEPROM "fujitsu,mb85rs256" compatible

 - Update Konrad Dybcio's email

* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of/irq: Prevent device address out-of-bounds read in interrupt map walk
  dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
  dt-bindings: Batch-update Konrad Dybcio's email

Although there are several patches improving the extent map shrinker,
there are still reports of too frequent shrinker behavior, taking too
much CPU for the kswapd process.

So let's only enable extent shrinker for now, until we got more
comprehensive understanding and a better solution.

Link: https://lore.kernel.org/linux-btrfs/3df4acd616a07ef4d2dc6bad668701504b412ffc.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/c30fd6b3-ca7a-4759-8a53-d42878bf84f7@gmail.com/
Fixes: 956a17d9 ("btrfs: add a shrinker for extent maps")
CC: stable@vger.kernel.org # 6.10+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull thermal control fix from Rafael Wysocki:
 "Fix a Bang-bang thermal governor issue causing it to fail to reset the
  state of cooling devices if they are 'on' to start with, but the
  thermal zone temperature is always below the corresponding trip point
  (Rafael Wysocki)"

* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: gov_bang_bang: Use governor_data to reduce overhead
  thermal: gov_bang_bang: Add .manage() callback
  thermal: gov_bang_bang: Split bang_bang_control()
  thermal: gov_bang_bang: Call __thermal_cdev_update() directly

Pull ACPI fix from Rafael Wysocki:
 "Fix an issue related to the ACPI EC device handling that causes the
  _REG control method to be evaluated for EC operation regions that are
  not expected to be used.

  This confuses the platform firmware and provokes various types of
  misbehavior on some systems (Rafael Wysocki)"

* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: EC: Evaluate _REG outside the EC scope more carefully
  ACPICA: Add a depth argument to acpi_execute_reg_methods()
  Revert "ACPI: EC: Evaluate orphan _REG under EC device"

Pull libnvdimm fix from Ira Weiny:
 "Commit f467fee4 ("block: move the dax flag to queue_limits") broke
  the DAX tests by skipping over the legacy pmem mapping pages case.

  Set the DAX flag in this case as well"

* tag 'libnvdimm-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm/pmem: Set dax flag for all 'PFN_MAP' cases

io_uring_cqe's user_data field refers to `sqe->data`, but io_uring_sqe
does not have a data field. Fix the comment to say `sqe->user_data`.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://github.com/axboe/liburing/pull/1206
Link: https://lore.kernel.org/r/20240816181526.3642732-1-csander@purestorage.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull rust fixes from Miguel Ojeda:

 - Fix '-Os' Rust 1.80.0+ builds adding more intrinsics (also tweaked in
   upstream Rust for the upcoming 1.82.0).

 - Fix support for the latest version of rust-analyzer due to a change
   on rust-analyzer config file semantics (considered a fix since most
   developers use the latest version of the tool, which is the only one
   actually supported by upstream). I am discussing stability of the
   config file with upstream -- they may be able to start versioning it.

 - Fix GCC 14 builds due to '-fmin-function-alignment' not skipped for
   libclang (bindgen).

 - A couple Kconfig fixes around '{RUSTC,BINDGEN}_VERSION_TEXT' to
   suppress error messages in a foreign architecture chroot and to use a
   proper default format.

 - Clean 'rust-analyzer' target warning due to missing recursive make
   invocation mark.

 - Clean Clippy warning due to missing indentation in docs.

 - Clean LLVM 19 build warning due to removed 3dnow feature upstream.

* tag 'rust-fixes-6.11' of https://github.com/Rust-for-Linux/linux:
  rust: x86: remove `-3dnow{,a}` from target features
  kbuild: rust-analyzer: mark `rust_is_available.sh` invocation as recursive
  rust: add intrinsics to fix `-Os` builds
  kbuild: rust: skip -fmin-function-alignment in bindgen flags
  rust: Support latest version of `rust-analyzer`
  rust: macros: indent list item in `module!`'s docs
  rust: fix the default format for CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT
  rust: suppress error messages from CONFIG_{RUSTC,BINDGEN}_VERSION_TEXT

Pull RISC-V fixes from Palmer Dabbelt:

 - reintroduce the text patching global icache flush

 - fix syscall entry code to correctly initialize a0, which manifested
   as a strace bug

 - XIP kernels now map the entire kernel, which fixes boot under at
   least DEBUG_VIRTUAL=y

 - initialize all nodes in the acpi_early_node_map initializer

 - fix OOB access in the Andes vendor extension probing code

 - A new key for scalar misaligned access performance in hwprobe, which
   correctly treat the values as an enum (as opposed to a bitmap)

* tag 'riscv-for-linus-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix out-of-bounds when accessing Andes per hart vendor extension array
  RISC-V: hwprobe: Add SCALAR to misaligned perf defines
  RISC-V: hwprobe: Add MISALIGNED_PERF key
  RISC-V: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
  riscv: change XIP's kernel_map.size to be size of the entire kernel
  riscv: entry: always initialize regs->a0 to -ENOSYS
  riscv: Re-introduce global icache flush in patch_text_XXX()

Pull tracing fixes from Steven Rostedt:
 "A couple of fixes for tracing:

   - Prevent a NULL pointer dereference in the error path of RTLA tool

   - Fix an infinite loop bug when reading from the ring buffer when
     closed. If there's a thread trying to read the ring buffer and it
     gets closed by another thread, the one reading will go into an
     infinite loop when the buffer is empty instead of exiting back to
     user space"

* tag 'trace-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rtla/osnoise: Prevent NULL dereference in error handling
  tracing: Return from tracing_buffers_read() if the file has been closed

Merge tag 'keys-trusted-next-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull key fixes from Jarkko Sakkinen:
 "Two bug fixes for a memory corruption bug and a memory leak bug in the
  DCP trusted keys type.

  Just as a reminder DCP was a crypto coprocessor in i.MX SoCs"

* tag 'keys-trusted-next-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  KEYS: trusted: dcp: fix leak of blob encryption key
  KEYS: trusted: fix DCP blob payload length assignment

Reported-by: syzbot+95e40eae71609e40d851@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+510b0b28f8e6de64d307@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+e3938cd6d761b78750e6@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Also, improve the calculation of the new table size, so that it can
shrink when needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'for-6.11/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mikulas Patocka:

 - fix misbehavior if suspend or resume is interrupted by a signal

 - fix wrong indentation in dm-crypt.rst

 - fix memory allocation failure in dm-persistent-data

* tag 'for-6.11/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm persistent data: fix memory allocation failure
  Documentation: dm-crypt.rst warning + error fix
  dm resume: don't return EINVAL when signalled
  dm suspend: return -ERESTARTSYS instead of -EINTR

Pull iommu fixes from Joerg Roedel:

 - Bring back a lost return statement in io-page-fault code

 - Remove an unused function declaration

* tag 'iommu-fixes-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  iommu: Remove unused declaration iommu_sva_unbind_gpasid()
  iommu: Restore lost return in iommu_report_device_fault()

Pull gpio fix from Bartosz Golaszewski:

 - add the shutdown() callback to gpio-mlxbf3 in order to disable
   interrupts during graceful reboot

* tag 'gpio-fixes-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mlxbf3: Support shutdown() function

Pull sound fixes from Takashi Iwai:
 "All small fixes, mostly for usual suspects, HD-audio and USB-audio
  device-specific fixes / quirks. The Cirrus codec support took the
  update of SPI header as well. Other than that, there is a regression
  fix in the sanity check of ALSA timer code"

* tag 'sound-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/tas2781: Use correct endian conversion
  ALSA: usb-audio: Support Yamaha P-125 quirk entry
  ALSA: hda: cs35l41: Remove redundant call to hda_cs_dsp_control_remove()
  ALSA: hda: cs35l56: Remove redundant call to hda_cs_dsp_control_remove()
  ALSA: hda/tas2781: fix wrong calibrated data order
  ALSA: usb-audio: Add delay quirk for VIVO USB-C-XE710 HEADSET
  ALSA: hda/realtek: Add support for new HP G12 laptops
  ALSA: hda/realtek: Fix noise from speakers on Lenovo IdeaPad 3 15IAU7
  ALSA: timer: Relax start tick time check for slave timer elements
  spi: Add empty versions of ACPI functions

Pull drm fixes from Dave Airlie:
 "Weekly drm fixes, mostly amdgpu and xe. The larger amdgpu fix is for a
  new IP block introduced in rc1, so should be fine. The xe fixes
  contain some missed fixes from the end of the previous round along
  with some fixes which required precursor changes, but otherwise
  everything seems fine,

  mediatek:
   - fix cursor crash

  amdgpu:
   - Fix MES ring buffer overflow
   - DCN 3.5 fix
   - DCN 3.2.1 fix
   - DP MST fix
   - Cursor fixes
   - JPEG fixes
   - Context ops validation
   - MES 12 fixes
   - VCN 5.0 fix
   - HDP fix

  panel:
   - dt bindings style fix
   - orientation quirks

  rockchip:
   - inno-hdmi: fix infoframe upload

  v3d:
   - fix OOB access in v3d_csd_job_run()

  xe:
   - Validate user fence during creation
   - Fix use after free when client stats are captured
   - SRIOV fixes
   - Runtime PM fixes"

* tag 'drm-fixes-2024-08-16' of https://gitlab.freedesktop.org/drm/kernel: (37 commits)
  drm/xe: Hold a PM ref when GT TLB invalidations are inflight
  drm/xe: Drop xe_gt_tlb_invalidation_wait
  drm/xe: Add xe_gt_tlb_invalidation_fence_init helper
  drm/xe/pf: Fix VF config validation on multi-GT platforms
  drm/xe: Build PM into GuC CT layer
  drm/xe/vf: Fix register value lookup
  drm/xe: Fix use after free when client stats are captured
  drm/xe: Take a ref to xe file when user creates a VM
  drm/xe: Add ref counting for xe_file
  drm/xe: Move part of xe_file cleanup to a helper
  drm/xe: Validate user fence during creation
  drm/rockchip: inno-hdmi: Fix infoframe upload
  drm/amd/amdgpu: add HDP_SD support on gc 12.0.0/1
  drm/amdgpu: Update kmd_fw_shared for VCN5
  drm/amd/amdgpu: command submission parser for JPEG
  drm/amdgpu/mes12: fix suspend issue
  drm/amdgpu/mes12: sw/hw fini for unified mes
  drm/amdgpu/mes12: configure two pipes hardware resources
  drm/amdgpu/mes12: adjust mes12 sw/hw init for multiple pipes
  drm/amdgpu/mes12: add mes pipe switch support
  ...

Merge tag 'i2c-host-fixes-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Two fixes in this update:

Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.

Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the
previous release.

After running once, the for_each_trip_desc() loop in
bang_bang_manage() is pure needless overhead because it is not going to
make any changes unless a new cooling device has been bound to one of
the trips in the thermal zone or the system is resuming from sleep.

For this reason, make bang_bang_manage() set governor_data for the
thermal zone and check it upfront to decide whether or not it needs to
do anything.

However, governor_data needs to be reset in some cases to let
bang_bang_manage() know that it should walk the trips again, so add an
.update_tz() callback to the governor and make the core additionally
invoke it during system resume.

To avoid affecting the other users of that callback unnecessarily, add
a special notification reason for system resume, THERMAL_TZ_RESUME, and
also pass it to __thermal_zone_device_update() called during system
resume for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/2285575.iZASKD2KPV@rjwysocki.net

After recent changes, the Bang-bang governor may not adjust the
initial configuration of cooling devices to the actual situation.

Namely, if a cooling device bound to a certain trip point starts in
the "on" state and the thermal zone temperature is below the threshold
of that trip point, the trip point may never be crossed on the way up
in which case the state of the cooling device will never be adjusted
because the thermal core will never invoke the governor's
.trip_crossed() callback.  [Note that there is no issue if the zone
temperature is at the trip threshold or above it to start with because
.trip_crossed() will be invoked then to indicate the start of thermal
mitigation for the given trip.]

To address this, add a .manage() callback to the Bang-bang governor
and use it to ensure that all of the thermal instances managed by the
governor have been initialized properly and the states of all of the
cooling devices involved have been adjusted to the current zone
temperature as appropriate.

Fixes: 530c932b ("thermal: gov_bang_bang: Use .trip_crossed() instead of .throttle()")
Link: https://lore.kernel.org/linux-pm/1bfbbae5-42b0-4c7d-9544-e98855715294@piie.net/
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/8419356.T7Z3S40VBb@rjwysocki.net

Move the setting of the thermal instance target state from
bang_bang_control() into a separate function that will be also called
in a different place going forward.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/3313587.aeNJFYEL58@rjwysocki.net