commit 8779657d upstream.

This changes the stack protector config option into a choice of
"None", "Regular", and "Strong":

   CONFIG_CC_STACKPROTECTOR_NONE
   CONFIG_CC_STACKPROTECTOR_REGULAR
   CONFIG_CC_STACKPROTECTOR_STRONG

"Regular" means the old CONFIG_CC_STACKPROTECTOR=y option.

"Strong" is a new mode introduced by this patch. With "Strong" the
kernel is built with -fstack-protector-strong (available in
gcc 4.9 and later). This option increases the coverage of the stack
protector without the heavy performance hit of -fstack-protector-all.

For reference, the stack protector options available in gcc are:

-fstack-protector-all:
  Adds the stack-canary saving prefix and stack-canary checking
  suffix to _all_ function entry and exit. Results in substantial
  use of stack space for saving the canary for deep stack users
  (e.g. historically xfs), and measurable (though shockingly still
  low) performance hit due to all the saving/checking. Really not
  suitable for sane systems, and was entirely removed as an option
  from the kernel many years ago.

-fstack-protector:
  Adds the canary save/check to functions that define an 8
  (--param=ssp-buffer-size=N, N=8 by default) or more byte local
  char array. Traditionally, stack overflows happened with
  string-based manipulations, so this was a way to find those
  functions. Very few total functions actually get the canary; no
  measurable performance or size overhead.

-fstack-protector-strong
  Adds the canary for a wider set of functions, since it's not
  just those with strings that have ultimately been vulnerable to
  stack-busting. With this superset, more functions end up with a
  canary, but it still remains small compared to all functions
  with only a small change in performance. Based on the original
  design document, a function gets the canary when it contains any
  of:

    - local variable's address used as part of the right hand side
      of an assignment or function argument
    - local variable is an array (or union containing an array),
      regardless of array type or length
    - uses register local variables

  https://docs.google.com/a/google.com/document/d/1xXBH6rRZue4f296vGt9YQcuLVQHeE516stHwt8M9xyU

Find below a comparison of "size" and "objdump" output when built with
gcc-4.9 in three configurations:

  - defconfig
	11430641 kernel text size
	36110 function bodies

  - defconfig + CONFIG_CC_STACKPROTECTOR_REGULAR
	11468490 kernel text size (+0.33%)
	1015 of 36110 functions are stack-protected (2.81%)

  - defconfig + CONFIG_CC_STACKPROTECTOR_STRONG via this patch
	11692790 kernel text size (+2.24%)
	7401 of 36110 functions are stack-protected (20.5%)

With -strong, ARM's compressed boot code now triggers stack
protection, so a static guard was added. Since this is only used
during decompression and was never used before, the exposure
here is very small. Once it switches to the full kernel, the
stack guard is back to normal.

Chrome OS has been using -fstack-protector-strong for its kernel
builds for the last 8 months with no problems.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-3-git-send-email-keescook@chromium.org
[ Improved the changelog and descriptions some more. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ kamal: 3.13-stable: need these arch/arm/boot/compressed/misc.c __stack_chk
  canary functions, even for just the old CONFIG_CC_STACKPROTECTOR ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 19952a92 upstream.

Instead of duplicating the CC_STACKPROTECTOR Kconfig and
Makefile logic in each architecture, switch to using
HAVE_CC_STACKPROTECTOR and keep everything in one place. This
retains the x86-specific bug verification scripts.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
[ kamal: 3.13-stable prereq for
  8779657d stackprotector: Introduce CONFIG_CC_STACKPROTECTOR_STRONG ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit e81107d4 upstream.

My colleague ran into a program stall on a x86_64 server, where
n_tty_read() was waiting for data even if there was data in the buffer
in the pty.  kernel stack for the stuck process looks like below.
 #0 [ffff88303d107b58] __schedule at ffffffff815c4b20
 #1 [ffff88303d107bd0] schedule at ffffffff815c513e
 #2 [ffff88303d107bf0] schedule_timeout at ffffffff815c7818
 #3 [ffff88303d107ca0] wait_woken at ffffffff81096bd2
 #4 [ffff88303d107ce0] n_tty_read at ffffffff8136fa23
 #5 [ffff88303d107dd0] tty_read at ffffffff81368013
 #6 [ffff88303d107e20] __vfs_read at ffffffff811a3704
 #7 [ffff88303d107ec0] vfs_read at ffffffff811a3a57
 #8 [ffff88303d107f00] sys_read at ffffffff811a4306
 #9 [ffff88303d107f50] entry_SYSCALL_64_fastpath at ffffffff815c86d7

There seems to be two problems causing this issue.

First, in drivers/tty/n_tty.c, __receive_buf() stores the data and
updates ldata->commit_head using smp_store_release() and then checks
the wait queue using waitqueue_active().  However, since there is no
memory barrier, __receive_buf() could return without calling
wake_up_interactive_poll(), and at the same time, n_tty_read() could
start to wait in wait_woken() as in the following chart.

        __receive_buf()                         n_tty_read()
------------------------------------------------------------------------
if (waitqueue_active(&tty->read_wait))
/* Memory operations issued after the
   RELEASE may be completed before the
   RELEASE operation has completed */
                                        add_wait_queue(&tty->read_wait, &wait);
                                        ...
                                        if (!input_available_p(tty, 0)) {
smp_store_release(&ldata->commit_head,
                  ldata->read_head);
                                        ...
                                        timeout = wait_woken(&wait,
                                          TASK_INTERRUPTIBLE, timeout);
------------------------------------------------------------------------

The second problem is that n_tty_read() also lacks a memory barrier
call and could also cause __receive_buf() to return without calling
wake_up_interactive_poll(), and n_tty_read() to wait in wait_woken()
as in the chart below.

        __receive_buf()                         n_tty_read()
------------------------------------------------------------------------
                                        spin_lock_irqsave(&q->lock, flags);
                                        /* from add_wait_queue() */
                                        ...
                                        if (!input_available_p(tty, 0)) {
                                        /* Memory operations issued after the
                                           RELEASE may be completed before the
                                           RELEASE operation has completed */
smp_store_release(&ldata->commit_head,
                  ldata->read_head);
if (waitqueue_active(&tty->read_wait))
                                        __add_wait_queue(q, wait);
                                        spin_unlock_irqrestore(&q->lock,flags);
                                        /* from add_wait_queue() */
                                        ...
                                        timeout = wait_woken(&wait,
                                          TASK_INTERRUPTIBLE, timeout);
------------------------------------------------------------------------

There are also other places in drivers/tty/n_tty.c which have similar
calls to waitqueue_active(), so instead of adding many memory barrier
calls, this patch simply removes the call to waitqueue_active(),
leaving just wake_up*() behind.

This fixes both problems because, even though the memory access before
or after the spinlocks in both wake_up*() and add_wait_queue() can
sneak into the critical section, it cannot go past it and the critical
section assures that they will be serialized (please see "INTER-CPU
ACQUIRING BARRIER EFFECTS" in Documentation/memory-barriers.txt for a
better explanation).  Moreover, the resulting code is much simpler.

Latency measurement using a ping-pong test over a pty doesn't show any
visible performance drop.
Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[jsalisbury: Backported to 3.13.y:
 - Use wake_up_interruptible(), not wake_up_interruptible_poll()
 - There are only two spurious uses of waitqueue_active() to remove]
BugLink: http://bugs.launchpad.net/bugs/1512815Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 0305cd5f upstream.

When truncating a file to a smaller size which consists of an inline
extent that is compressed, we did not discard (or made unusable) the
data between the new file size and the old file size, wasting metadata
space and allowing for the truncated data to be leaked and the data
corruption/loss mentioned below.
We were also not correctly decrementing the number of bytes used by the
inode, we were setting it to zero, giving a wrong report for callers of
the stat(2) syscall. The fsck tool also reported an error about a mismatch
between the nbytes of the file versus the real space used by the file.

Now because we weren't discarding the truncated region of the file, it
was possible for a caller of the clone ioctl to actually read the data
that was truncated, allowing for a security breach without requiring root
access to the system, using only standard filesystem operations. The
scenario is the following:

   1) User A creates a file which consists of an inline and compressed
      extent with a size of 2000 bytes - the file is not accessible to
      any other users (no read, write or execution permission for anyone
      else);

   2) The user truncates the file to a size of 1000 bytes;

   3) User A makes the file world readable;

   4) User B creates a file consisting of an inline extent of 2000 bytes;

   5) User B issues a clone operation from user A's file into its own
      file (using a length argument of 0, clone the whole range);

   6) User B now gets to see the 1000 bytes that user A truncated from
      its file before it made its file world readbale. User B also lost
      the bytes in the range [1000, 2000[ bytes from its own file, but
      that might be ok if his/her intention was reading stale data from
      user A that was never supposed to be public.

Note that this contrasts with the case where we truncate a file from 2000
bytes to 1000 bytes and then truncate it back from 1000 to 2000 bytes. In
this case reading any byte from the range [1000, 2000[ will return a value
of 0x00, instead of the original data.

This problem exists since the clone ioctl was added and happens both with
and without my recent data loss and file corruption fixes for the clone
ioctl (patch "Btrfs: fix file corruption and data loss after cloning
inline extents").

So fix this by truncating the compressed inline extents as we do for the
non-compressed case, which involves decompressing, if the data isn't already
in the page cache, compressing the truncated version of the extent, writing
the compressed content into the inline extent and then truncate it.

The following test case for fstests reproduces the problem. In order for
the test to pass both this fix and my previous fix for the clone ioctl
that forbids cloning a smaller inline extent into a larger one,
which is titled "Btrfs: fix file corruption and data loss after cloning
inline extents", are needed. Without that other fix the test fails in a
different way that does not leak the truncated data, instead part of
destination file gets replaced with zeroes (because the destination file
has a larger inline extent than the source).

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner

  rm -f $seqres.full

  _scratch_mkfs >>$seqres.full 2>&1
  _scratch_mount "-o compress"

  # Create our test files. File foo is going to be the source of a clone operation
  # and consists of a single inline extent with an uncompressed size of 512 bytes,
  # while file bar consists of a single inline extent with an uncompressed size of
  # 256 bytes. For our test's purpose, it's important that file bar has an inline
  # extent with a size smaller than foo's inline extent.
  $XFS_IO_PROG -f -c "pwrite -S 0xa1 0 128"   \
          -c "pwrite -S 0x2a 128 384" \
          $SCRATCH_MNT/foo | _filter_xfs_io
  $XFS_IO_PROG -f -c "pwrite -S 0xbb 0 256" $SCRATCH_MNT/bar | _filter_xfs_io

  # Now durably persist all metadata and data. We do this to make sure that we get
  # on disk an inline extent with a size of 512 bytes for file foo.
  sync

  # Now truncate our file foo to a smaller size. Because it consists of a
  # compressed and inline extent, btrfs did not shrink the inline extent to the
  # new size (if the extent was not compressed, btrfs would shrink it to 128
  # bytes), it only updates the inode's i_size to 128 bytes.
  $XFS_IO_PROG -c "truncate 128" $SCRATCH_MNT/foo

  # Now clone foo's inline extent into bar.
  # This clone operation should fail with errno EOPNOTSUPP because the source
  # file consists only of an inline extent and the file's size is smaller than
  # the inline extent of the destination (128 bytes < 256 bytes). However the
  # clone ioctl was not prepared to deal with a file that has a size smaller
  # than the size of its inline extent (something that happens only for compressed
  # inline extents), resulting in copying the full inline extent from the source
  # file into the destination file.
  #
  # Note that btrfs' clone operation for inline extents consists of removing the
  # inline extent from the destination inode and copy the inline extent from the
  # source inode into the destination inode, meaning that if the destination
  # inode's inline extent is larger (N bytes) than the source inode's inline
  # extent (M bytes), some bytes (N - M bytes) will be lost from the destination
  # file. Btrfs could copy the source inline extent's data into the destination's
  # inline extent so that we would not lose any data, but that's currently not
  # done due to the complexity that would be needed to deal with such cases
  # (specially when one or both extents are compressed), returning EOPNOTSUPP, as
  # it's normally not a very common case to clone very small files (only case
  # where we get inline extents) and copying inline extents does not save any
  # space (unlike for normal, non-inlined extents).
  $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/foo $SCRATCH_MNT/bar

  # Now because the above clone operation used to succeed, and due to foo's inline
  # extent not being shinked by the truncate operation, our file bar got the whole
  # inline extent copied from foo, making us lose the last 128 bytes from bar
  # which got replaced by the bytes in range [128, 256[ from foo before foo was
  # truncated - in other words, data loss from bar and being able to read old and
  # stale data from foo that should not be possible to read anymore through normal
  # filesystem operations. Contrast with the case where we truncate a file from a
  # size N to a smaller size M, truncate it back to size N and then read the range
  # [M, N[, we should always get the value 0x00 for all the bytes in that range.

  # We expected the clone operation to fail with errno EOPNOTSUPP and therefore
  # not modify our file's bar data/metadata. So its content should be 256 bytes
  # long with all bytes having the value 0xbb.
  #
  # Without the btrfs bug fix, the clone operation succeeded and resulted in
  # leaking truncated data from foo, the bytes that belonged to its range
  # [128, 256[, and losing data from bar in that same range. So reading the
  # file gave us the following content:
  #
  # 0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
  # *
  # 0000200 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a 2a
  # *
  # 0000400
  echo "File bar's content after the clone operation:"
  od -t x1 $SCRATCH_MNT/bar

  # Also because the foo's inline extent was not shrunk by the truncate
  # operation, btrfs' fsck, which is run by the fstests framework everytime a
  # test completes, failed reporting the following error:
  #
  #  root 5 inode 257 errors 400, nbytes wrong

  status=0
  exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[ kamal: backport 3.13-stable: root->ref_cows vs BTRFS_ROOT_REF_COWS; context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 514ac8ad upstream.

If we truncate an uncompressed inline item, ram_bytes isn't updated to reflect
the new size.  The fixe uses the size directly from the item header when
reading uncompressed inlines, and also fixes truncate to update the
size as it goes.
Reported-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
[ kamal: backport to 3.13-stable: applied to all _inline_len callers ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 8039d87d upstream.

Currently the clone ioctl allows to clone an inline extent from one file
to another that already has other (non-inlined) extents. This is a problem
because btrfs is not designed to deal with files having inline and regular
extents, if a file has an inline extent then it must be the only extent
in the file and must start at file offset 0. Having a file with an inline
extent followed by regular extents results in EIO errors when doing reads
or writes against the first 4K of the file.

Also, the clone ioctl allows one to lose data if the source file consists
of a single inline extent, with a size of N bytes, and the destination
file consists of a single inline extent with a size of M bytes, where we
have M > N. In this case the clone operation removes the inline extent
from the destination file and then copies the inline extent from the
source file into the destination file - we lose the M - N bytes from the
destination file, a read operation will get the value 0x00 for any bytes
in the the range [N, M] (the destination inode's i_size remained as M,
that's why we can read past N bytes).

So fix this by not allowing such destructive operations to happen and
return errno EOPNOTSUPP to user space.

Currently the fstest btrfs/035 tests the data loss case but it totally
ignores this - i.e. expects the operation to succeed and does not check
the we got data loss.

The following test case for fstests exercises all these cases that result
in file corruption and data loss:

  seq=`basename $0`
  seqres=$RESULT_DIR/$seq
  echo "QA output created by $seq"
  tmp=/tmp/$$
  status=1	# failure is the default!
  trap "_cleanup; exit \$status" 0 1 2 3 15

  _cleanup()
  {
      rm -f $tmp.*
  }

  # get standard environment, filters and checks
  . ./common/rc
  . ./common/filter

  # real QA test starts here
  _need_to_be_root
  _supported_fs btrfs
  _supported_os Linux
  _require_scratch
  _require_cloner
  _require_btrfs_fs_feature "no_holes"
  _require_btrfs_mkfs_feature "no-holes"

  rm -f $seqres.full

  test_cloning_inline_extents()
  {
      local mkfs_opts=$1
      local mount_opts=$2

      _scratch_mkfs $mkfs_opts >>$seqres.full 2>&1
      _scratch_mount $mount_opts

      # File bar, the source for all the following clone operations, consists
      # of a single inline extent (50 bytes).
      $XFS_IO_PROG -f -c "pwrite -S 0xbb 0 50" $SCRATCH_MNT/bar \
          | _filter_xfs_io

      # Test cloning into a file with an extent (non-inlined) where the
      # destination offset overlaps that extent. It should not be possible to
      # clone the inline extent from file bar into this file.
      $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 16K" $SCRATCH_MNT/foo \
          | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo

      # Doing IO against any range in the first 4K of the file should work.
      # Due to a past clone ioctl bug which allowed cloning the inline extent,
      # these operations resulted in EIO errors.
      echo "File foo data after clone operation:"
      # All bytes should have the value 0xaa (clone operation failed and did
      # not modify our file).
      od -t x1 $SCRATCH_MNT/foo
      $XFS_IO_PROG -c "pwrite -S 0xcc 0 100" $SCRATCH_MNT/foo | _filter_xfs_io

      # Test cloning the inline extent against a file which has a hole in its
      # first 4K followed by a non-inlined extent. It should not be possible
      # as well to clone the inline extent from file bar into this file.
      $XFS_IO_PROG -f -c "pwrite -S 0xdd 4K 12K" $SCRATCH_MNT/foo2 \
          | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo2

      # Doing IO against any range in the first 4K of the file should work.
      # Due to a past clone ioctl bug which allowed cloning the inline extent,
      # these operations resulted in EIO errors.
      echo "File foo2 data after clone operation:"
      # All bytes should have the value 0x00 (clone operation failed and did
      # not modify our file).
      od -t x1 $SCRATCH_MNT/foo2
      $XFS_IO_PROG -c "pwrite -S 0xee 0 90" $SCRATCH_MNT/foo2 | _filter_xfs_io

      # Test cloning the inline extent against a file which has a size of zero
      # but has a prealloc extent. It should not be possible as well to clone
      # the inline extent from file bar into this file.
      $XFS_IO_PROG -f -c "falloc -k 0 1M" $SCRATCH_MNT/foo3 | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo3

      # Doing IO against any range in the first 4K of the file should work.
      # Due to a past clone ioctl bug which allowed cloning the inline extent,
      # these operations resulted in EIO errors.
      echo "First 50 bytes of foo3 after clone operation:"
      # Should not be able to read any bytes, file has 0 bytes i_size (the
      # clone operation failed and did not modify our file).
      od -t x1 $SCRATCH_MNT/foo3
      $XFS_IO_PROG -c "pwrite -S 0xff 0 90" $SCRATCH_MNT/foo3 | _filter_xfs_io

      # Test cloning the inline extent against a file which consists of a
      # single inline extent that has a size not greater than the size of
      # bar's inline extent (40 < 50).
      # It should be possible to do the extent cloning from bar to this file.
      $XFS_IO_PROG -f -c "pwrite -S 0x01 0 40" $SCRATCH_MNT/foo4 \
          | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo4

      # Doing IO against any range in the first 4K of the file should work.
      echo "File foo4 data after clone operation:"
      # Must match file bar's content.
      od -t x1 $SCRATCH_MNT/foo4
      $XFS_IO_PROG -c "pwrite -S 0x02 0 90" $SCRATCH_MNT/foo4 | _filter_xfs_io

      # Test cloning the inline extent against a file which consists of a
      # single inline extent that has a size greater than the size of bar's
      # inline extent (60 > 50).
      # It should not be possible to clone the inline extent from file bar
      # into this file.
      $XFS_IO_PROG -f -c "pwrite -S 0x03 0 60" $SCRATCH_MNT/foo5 \
          | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo5

      # Reading the file should not fail.
      echo "File foo5 data after clone operation:"
      # Must have a size of 60 bytes, with all bytes having a value of 0x03
      # (the clone operation failed and did not modify our file).
      od -t x1 $SCRATCH_MNT/foo5

      # Test cloning the inline extent against a file which has no extents but
      # has a size greater than bar's inline extent (16K > 50).
      # It should not be possible to clone the inline extent from file bar
      # into this file.
      $XFS_IO_PROG -f -c "truncate 16K" $SCRATCH_MNT/foo6 | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo6

      # Reading the file should not fail.
      echo "File foo6 data after clone operation:"
      # Must have a size of 16K, with all bytes having a value of 0x00 (the
      # clone operation failed and did not modify our file).
      od -t x1 $SCRATCH_MNT/foo6

      # Test cloning the inline extent against a file which has no extents but
      # has a size not greater than bar's inline extent (30 < 50).
      # It should be possible to clone the inline extent from file bar into
      # this file.
      $XFS_IO_PROG -f -c "truncate 30" $SCRATCH_MNT/foo7 | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo7

      # Reading the file should not fail.
      echo "File foo7 data after clone operation:"
      # Must have a size of 50 bytes, with all bytes having a value of 0xbb.
      od -t x1 $SCRATCH_MNT/foo7

      # Test cloning the inline extent against a file which has a size not
      # greater than the size of bar's inline extent (20 < 50) but has
      # a prealloc extent that goes beyond the file's size. It should not be
      # possible to clone the inline extent from bar into this file.
      $XFS_IO_PROG -f -c "falloc -k 0 1M" \
                      -c "pwrite -S 0x88 0 20" \
                      $SCRATCH_MNT/foo8 | _filter_xfs_io
      $CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo8

      echo "File foo8 data after clone operation:"
      # Must have a size of 20 bytes, with all bytes having a value of 0x88
      # (the clone operation did not modify our file).
      od -t x1 $SCRATCH_MNT/foo8

      _scratch_unmount
  }

  echo -e "\nTesting without compression and without the no-holes feature...\n"
  test_cloning_inline_extents

  echo -e "\nTesting with compression and without the no-holes feature...\n"
  test_cloning_inline_extents "" "-o compress"

  echo -e "\nTesting without compression and with the no-holes feature...\n"
  test_cloning_inline_extents "-O no-holes" ""

  echo -e "\nTesting with compression and with the no-holes feature...\n"
  test_cloning_inline_extents "-O no-holes" "-o compress"

  status=0
  exit
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[ kamal: backport to 3.13-stable: context ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 2a708cff upstream.

__dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and
suspend_lock in reverse order.  Doing so can cause AB-BA deadlock:

  __dm_destroy                    dm_swap_table
  ---------------------------------------------------
                                  mutex_lock(suspend_lock)
  dm_get_live_table()
    srcu_read_lock(io_barrier)
                                  dm_sync_table()
                                    synchronize_srcu(io_barrier)
                                      .. waiting for dm_put_live_table()
  mutex_lock(suspend_lock)
    .. waiting for suspend_lock

Fix this by taking the locks in proper order.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Fixes: ab7c7bb6 ("dm: hold suspend_lock while suspending device during device deletion")
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

This reverts commit a1e5fc68 (which is
a botched cherry-pick), to be replaced with a fixed backport.
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit eb8ed1eb upstream.

Reference to the 'np' node is dropped before dereferencing the 'sizep' and
'basep' pointers, which could by then point to junk if the node has been
freed.

Refactor code to call 'of_node_put' later.

Fixes: c5df3926 ("drivers/char/tpm: Add securityfs support for event log")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <PeterHuewe@gmx.de>
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit dbc3617f upstream.

nfnetlink_bind request_module()s all the time as nfnetlink_get_subsys()
shifts the argument by 8 to obtain the subsys id.

So using type instead of type << 8 always returns NULL.

Fixes: 03292745 ("netlink: add nlk->netlink_bind hook for module auto-loading")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 3c67d839 upstream.

In its original version, drm_framebuffer_init() returned a negative int
if drm_mode_object_get() failed (f453ba04, "DRM: add mode setting
support").

This was accidentally disabled by commit 4b096ac1 ("drm: revamp
locking around fb creation/destruction"). Thus, drm_framebuffer_init()
pretends success if drm_mode_object_get() failed.

Reinstate the original behaviour. Also fix erroneous kernel-doc of
drm_mode_object_get().

Fixes: 4b096ac1 ("drm: revamp locking around fb creation/
    destruction")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 54c09889 upstream.

The z2 machine calls pxa27x_set_pwrmode() in order to power off
the machine, but this function gets discarded early at boot because
it is marked __init, as pointed out by kbuild:

WARNING: vmlinux.o(.text+0x145c4): Section mismatch in reference from the function z2_power_off() to the function .init.text:pxa27x_set_pwrmode()
The function z2_power_off() references
the function __init pxa27x_set_pwrmode().
This is often because z2_power_off lacks a __init
annotation or the annotation of pxa27x_set_pwrmode is wrong.

This removes the __init section modifier to fix rebooting and the
build error.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: ba4a90a6 ("ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 161642e2 upstream.

Recent TCP listener patches exposed a prior af_packet bug :
match_fanout_group() blindly assumes it is always safe
to cast sk to a packet socket to compare fanout with af_packet_priv

But SYNACK packets can be sent while attached to request_sock, which
are smaller than a "struct sock".

We can read non existent memory and crash.

Fixes: c0de08d0 ("af_packet: don't emit packet on orig fanout group")
Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Eric Leblond <eric@regit.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 8ec6d978 upstream.

The ifmgd->ave_beacon_signal value cannot be taken as is for
comparisons, it must be divided by since it's represented
like that for better accuracy of the EWMA calculations. This
would lead to invalid driver RSSI events. Fix the used value.

Fixes: 615f7b9b ("mac80211: add driver RSSI threshold events")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 40baec22 upstream.

Since commit 7d5cd2ce529b, when bond_enslave fails on devices that
are not ARPHRD_ETHER, if needed, it resets the bonding device back to
ARPHRD_ETHER by calling ether_setup.

	Unfortunately, ether_setup clobbers dev->flags, clearing IFF_UP
if the bond device is up, leaving it in a quasi-down state without
having actually gone through dev_close.  For bonding, if any periodic
work queue items are active (miimon, arp_interval, etc), those will
remain running, as they are stopped by bond_close.  At this point, if
the bonding module is unloaded or the bond is deleted, the system will
panic when the work function is called.

	This panic is resolved by calling dev_close on the bond itself
prior to calling ether_setup.

Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: 7d5cd2ce ("bonding: correctly handle bonding type change on enslave failure")
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 956959f6 upstream.

The -i flag was incorrectly listed as a short flag for --no-inherit.  It
should have only been listed as a short flag for --input.

This documentation error has existed since the --input flag was
introduced in 6810fc91 (perf trace: Add
option to analyze events in a file versus live).
Signed-off-by: Peter Feiner <pfeiner@google.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1446657706-14518-1-git-send-email-pfeiner@google.com
Fixes: 6810fc91 ("perf trace: Add option to analyze events in a file versus live")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit ebac62fe upstream.

Both tunnel6_protocol and tunnel46_protocol share the same error
handler, tunnel6_err(), which traverses through tunnel6_handlers list.
For ipip6 tunnels, we need to traverse tunnel46_handlers as we do e.g.
in tunnel46_rcv(). Current code can generate an ICMPv6 error message
with an IPv4 packet embedded in it.

Fixes: 73d605d1 ("[IPSEC]: changing API of xfrm6_tunnel_register")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit f25319d2 upstream.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fixes: f24219b4
(cherry picked from commit f0a232cde7be18a207fd057dd79bbac8a0a45dec)
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 1f35d04a upstream.

The iomap[] array has PCIM_IOMAP_MAX (6) elements and not
DEVICE_COUNT_RESOURCE (16).  This bug was found using a static checker.
It may be that the "if (!(mask & (1 << i)))" check means we never
actually go past the end of the array in real life.

Fixes: ec04b075 ('iomap: implement pcim_iounmap_regions()')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 39416677 upstream.

We replace __fls() by __ffs() since we have to find a *minimum* data width that
satisfies both source and destination.

While here, rename dwc_fast_fls() to dwc_fast_ffs() which it really is.

Fixes: 4c2d56c5 (dw_dmac: introduce dwc_fast_fls())
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 1f9c6e1b upstream.

There were several bugs here.

1)  The done label was in the wrong place so we didn't copy any
    information out when there was no command given.

2)  We were using PAGE_SIZE as the size of the buffer instead of
    "PAGE_SIZE - pos".

3)  snprintf() returns the number of characters that would have been
    printed if there were enough space.  If there was not enough space
    (and we had fixed the memory corruption bug #2) then it would result
    in an information leak when we do simple_read_from_buffer().  I've
    changed it to use scnprintf() instead.

I also removed the initialization at the start of the function, because
I thought it made the code a little more clear.

Fixes: 5e6e3a92 ('wireless: mwifiex: initial commit for Marvell mwifiex driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 90adf98d upstream.

Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.

scripts/coccinelle/misc/irqf_oneshot.cocci detected this issue.

Fixes: b5874f33 ("wm831x_power: Use genirq")
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b582ef5c upstream.

Do not clobber the buffer space passed from `search_binary_handler' and
originally preloaded by `prepare_binprm' with the executable's file
header by overwriting it with its interpreter's file header.  Instead
keep the buffer space intact and directly use the data structure locally
allocated for the interpreter's file header, fixing a bug introduced in
2.1.14 with loadable module support (linux-mips.org commit beb11695
[Import of Linux/MIPS 2.1.14], predating kernel.org repo's history).
Adjust the amount of data read from the interpreter's file accordingly.

This was not an issue before loadable module support, because back then
`load_elf_binary' was executed only once for a given ELF executable,
whether the function succeeded or failed.

With loadable module support supported and enabled, upon a failure of
`load_elf_binary' -- which may for example be caused by architecture
code rejecting an executable due to a missing hardware feature requested
in the file header -- a module load is attempted and then the function
reexecuted by `search_binary_handler'.  With the executable's file
header replaced with its interpreter's file header the executable can
then be erroneously accepted in this subsequent attempt.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 102f4d90 upstream.

Handle a write being requested to the page immediately beyond the EOF
marker on a cache object.  Currently this gets an assertion failure in
CacheFiles because the EOF marker is used there to encode information about
a partial page at the EOF - which could lead to an unknown blank spot in
the file if we extend the file over it.

The problem is actually in fscache where we check the index of the page
being written against store_limit.  store_limit is set to the number of
pages that we're allowed to store by fscache_set_store_limit() - which
means it's one more than the index of the last page we're allowed to store.
The problem is that we permit writing to a page with an index _equal_ to
the store limit - when we should reject that case.

Whilst we're at it, change the triggered assertion in CacheFiles to just
return -ENOBUFS instead.

The assertion failure looks something like this:

CacheFiles: Assertion failed
1000 < 7b1 is false
------------[ cut here ]------------
kernel BUG at fs/cachefiles/rdwr.c:962!
...
RIP: 0010:[<ffffffffa02c9e83>]  [<ffffffffa02c9e83>] cachefiles_write_page+0x273/0x2d0 [cachefiles]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ kamal: backport to 3.13-stable: no __kernel_write(); thanks Ben H. ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b130ed59 upstream.

Only override netfs->primary_index when registering success.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 86108c2e upstream.

If netfs exist, fscache should not increase the reference of parent's
usage and n_children, otherwise, never be decreased.

v2: thanks David's suggest,
 move increasing reference of parent if success
 use kmem_cache_free() freeing primary_index directly

v3: don't move "netfs->primary_index->parent = &fscache_fsdef_index;"
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 28fb4cb7 upstream.

Due to a missing initialization there was no way to map fbdev memory.
Thus for example using the Xserver with the fbdev driver failed.
This fix adds initialization for fix.smem_start and fix.smem_len
in the fb_info structure, which fixes this problem.
Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Egbert Eich <eich@suse.de>
[pulled from SuSE tree by me - airlied]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit cbdb967a upstream.

This is needed to avoid the possibility that the guest triggers
an infinite stream of #DB exceptions (CVE-2015-8104).

VMX is not affected: because it does not save DR6 in the VMCS,
it already intercepts #DB unconditionally.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 54a20552 upstream.

It was found that a guest can DoS a host by triggering an infinite
stream of "alignment check" (#AC) exceptions.  This causes the
microcode to enter an infinite loop where the core never receives
another interrupt.  The host kernel panics pretty quickly due to the
effects (CVE-2015-5307).
Signed-off-by: Eric Northup <digitaleric@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit c9cdd085 upstream.

Defining XE, XM and VE vector numbers.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ kamal: 3.13-stable prereq ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 8cf308e1 upstream.

Don't set the SRB_FLAGS_QUEUE_ACTION_ENABLE flag since we are not specifying
tags.  Without this, the qlogic driver doesn't work properly with storvsc.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit f1cd1f0b upstream.

When listing a inode's xattrs we have a time window where we race against
a concurrent operation for adding a new hard link for our inode that makes
us not return any xattr to user space. In order for this to happen, the
first xattr of our inode needs to be at slot 0 of a leaf and the previous
leaf must still have room for an inode ref (or extref) item, and this can
happen because an inode's listxattrs callback does not lock the inode's
i_mutex (nor does the VFS does it for us), but adding a hard link to an
inode makes the VFS lock the inode's i_mutex before calling the inode's
link callback.

If we have the following leafs:

               Leaf X (has N items)                    Leaf Y

 [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 XATTR_ITEM 12345), ... ]
           slot N - 2         slot N - 1              slot 0

The race illustrated by the following sequence diagram is possible:

       CPU 1                                               CPU 2

  btrfs_listxattr()

    searches for key (257 XATTR_ITEM 0)

    gets path with path->nodes[0] == leaf X
    and path->slots[0] == N

    because path->slots[0] is >=
    btrfs_header_nritems(leaf X), it calls
    btrfs_next_leaf()

    btrfs_next_leaf()
      releases the path

                                                   adds key (257 INODE_REF 666)
                                                   to the end of leaf X (slot N),
                                                   and leaf X now has N + 1 items

      searches for the key (257 INODE_REF 256),
      with path->keep_locks == 1, because that
      is the last key it saw in leaf X before
      releasing the path

      ends up at leaf X again and it verifies
      that the key (257 INODE_REF 256) is no
      longer the last key in leaf X, so it
      returns with path->nodes[0] == leaf X
      and path->slots[0] == N, pointing to
      the new item with key (257 INODE_REF 666)

    btrfs_listxattr's loop iteration sees that
    the type of the key pointed by the path is
    different from the type BTRFS_XATTR_ITEM_KEY
    and so it breaks the loop and stops looking
    for more xattr items
      --> the application doesn't get any xattr
          listed for our inode

So fix this by breaking the loop only if the key's type is greater than
BTRFS_XATTR_ITEM_KEY and skip the current key if its type is smaller.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[ luis: backported to 3.16:
  - drop btrfs_key_type(), which was dropped upstream by
    962a298f ("btrfs: kill the key type accessor helpers") ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 863e02d0 upstream.

Writing a number to /sys/bus/scsi/devices/<sdev>/queue_ramp_up_period
returns the value of that number instead of the number of bytes written.
This behavior can confuse programs expecting POSIX write() semantics.
Fix this by returning the number of bytes written instead.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit b71b437e upstream.

Arnaldo reported that tracepoint filters seem to misbehave (ie. not
apply) on inherited events.

The fix is obvious; filters are only set on the actual (parent)
event, use the normal pattern of using this parent event for filters.
This is safe because each child event has a reference to it.
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151102095051.GN17308@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 1d512cb7 upstream.

If we are using the NO_HOLES feature, we have a tiny time window when
running delalloc for a nodatacow inode where we can race with a concurrent
link or xattr add operation leading to a BUG_ON.

This happens because at run_delalloc_nocow() we end up casting a leaf item
of type BTRFS_INODE_[REF|EXTREF]_KEY or of type BTRFS_XATTR_ITEM_KEY to a
file extent item (struct btrfs_file_extent_item) and then analyse its
extent type field, which won't match any of the expected extent types
(values BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]) and therefore trigger an
explicit BUG_ON(1).

The following sequence diagram shows how the race happens when running a
no-cow dellaloc range [4K, 8K[ for inode 257 and we have the following
neighbour leafs:

             Leaf X (has N items)                    Leaf Y

 [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 EXTENT_DATA 8192), ... ]
              slot N - 2         slot N - 1              slot 0

 (Note the implicit hole for inode 257 regarding the [0, 8K[ range)

       CPU 1                                         CPU 2

 run_dealloc_nocow()
   btrfs_lookup_file_extent()
     --> searches for a key with value
         (257 EXTENT_DATA 4096) in the
         fs/subvol tree
     --> returns us a path with
         path->nodes[0] == leaf X and
         path->slots[0] == N

   because path->slots[0] is >=
   btrfs_header_nritems(leaf X), it
   calls btrfs_next_leaf()

   btrfs_next_leaf()
     --> releases the path

                                              hard link added to our inode,
                                              with key (257 INODE_REF 500)
                                              added to the end of leaf X,
                                              so leaf X now has N + 1 keys

     --> searches for the key
         (257 INODE_REF 256), because
         it was the last key in leaf X
         before it released the path,
         with path->keep_locks set to 1

     --> ends up at leaf X again and
         it verifies that the key
         (257 INODE_REF 256) is no longer
         the last key in the leaf, so it
         returns with path->nodes[0] ==
         leaf X and path->slots[0] == N,
         pointing to the new item with
         key (257 INODE_REF 500)

   the loop iteration of run_dealloc_nocow()
   does not break out the loop and continues
   because the key referenced in the path
   at path->nodes[0] and path->slots[0] is
   for inode 257, its type is < BTRFS_EXTENT_DATA_KEY
   and its offset (500) is less then our delalloc
   range's end (8192)

   the item pointed by the path, an inode reference item,
   is (incorrectly) interpreted as a file extent item and
   we get an invalid extent type, leading to the BUG_ON(1):

   if (extent_type == BTRFS_FILE_EXTENT_REG ||
      extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
       (...)
   } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
       (...)
   } else {
       BUG_ON(1)
   }

The same can happen if a xattr is added concurrently and ends up having
a key with an offset smaller then the delalloc's range end.

So fix this by skipping keys with a type smaller than
BTRFS_EXTENT_DATA_KEY.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit aeafbf84 upstream.

While running a stress test I got the following warning triggered:

  [191627.672810] ------------[ cut here ]------------
  [191627.673949] WARNING: CPU: 8 PID: 8447 at fs/btrfs/file.c:779 __btrfs_drop_extents+0x391/0xa50 [btrfs]()
  (...)
  [191627.701485] Call Trace:
  [191627.702037]  [<ffffffff8145f077>] dump_stack+0x4f/0x7b
  [191627.702992]  [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2
  [191627.704091]  [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
  [191627.705380]  [<ffffffffa0664499>] ? __btrfs_drop_extents+0x391/0xa50 [btrfs]
  [191627.706637]  [<ffffffff8104b46d>] warn_slowpath_null+0x1a/0x1c
  [191627.707789]  [<ffffffffa0664499>] __btrfs_drop_extents+0x391/0xa50 [btrfs]
  [191627.709155]  [<ffffffff8115663c>] ? cache_alloc_debugcheck_after.isra.32+0x171/0x1d0
  [191627.712444]  [<ffffffff81155007>] ? kmemleak_alloc_recursive.constprop.40+0x16/0x18
  [191627.714162]  [<ffffffffa06570c9>] insert_reserved_file_extent.constprop.40+0x83/0x24e [btrfs]
  [191627.715887]  [<ffffffffa065422b>] ? start_transaction+0x3bb/0x610 [btrfs]
  [191627.717287]  [<ffffffffa065b604>] btrfs_finish_ordered_io+0x273/0x4e2 [btrfs]
  [191627.728865]  [<ffffffffa065b888>] finish_ordered_fn+0x15/0x17 [btrfs]
  [191627.730045]  [<ffffffffa067d688>] normal_work_helper+0x14c/0x32c [btrfs]
  [191627.731256]  [<ffffffffa067d96a>] btrfs_endio_write_helper+0x12/0x14 [btrfs]
  [191627.732661]  [<ffffffff81061119>] process_one_work+0x24c/0x4ae
  [191627.733822]  [<ffffffff810615b0>] worker_thread+0x206/0x2c2
  [191627.734857]  [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f
  [191627.736052]  [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f
  [191627.737349]  [<ffffffff810669a6>] kthread+0xef/0xf7
  [191627.738267]  [<ffffffff810f3b3a>] ? time_hardirqs_on+0x15/0x28
  [191627.739330]  [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad
  [191627.741976]  [<ffffffff81465592>] ret_from_fork+0x42/0x70
  [191627.743080]  [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad
  [191627.744206] ---[ end trace bbfddacb7aaada8d ]---

  $ cat -n fs/btrfs/file.c
  691  int __btrfs_drop_extents(struct btrfs_trans_handle *trans,
  (...)
  758                  btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
  759                  if (key.objectid > ino ||
  760                      key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= end)
  761                          break;
  762
  763                  fi = btrfs_item_ptr(leaf, path->slots[0],
  764                                      struct btrfs_file_extent_item);
  765                  extent_type = btrfs_file_extent_type(leaf, fi);
  766
  767                  if (extent_type == BTRFS_FILE_EXTENT_REG ||
  768                      extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
  (...)
  774                  } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
  (...)
  778                  } else {
  779                          WARN_ON(1);
  780                          extent_end = search_start;
  781                  }
  (...)

This happened because the item we were processing did not match a file
extent item (its key type != BTRFS_EXTENT_DATA_KEY), and even on this
case we cast the item to a struct btrfs_file_extent_item pointer and
then find a type field value that does not match any of the expected
values (BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]). This scenario happens
due to a tiny time window where a race can happen as exemplified below.
For example, consider the following scenario where we're using the
NO_HOLES feature and we have the following two neighbour leafs:

               Leaf X (has N items)                    Leaf Y

[ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 EXTENT_DATA 8192), ... ]
          slot N - 2         slot N - 1              slot 0

Our inode 257 has an implicit hole in the range [0, 8K[ (implicit rather
than explicit because NO_HOLES is enabled). Now if our inode has an
ordered extent for the range [4K, 8K[ that is finishing, the following
can happen:

          CPU 1                                       CPU 2

  btrfs_finish_ordered_io()
    insert_reserved_file_extent()
      __btrfs_drop_extents()
         Searches for the key
          (257 EXTENT_DATA 4096) through
          btrfs_lookup_file_extent()

         Key not found and we get a path where
         path->nodes[0] == leaf X and
         path->slots[0] == N

         Because path->slots[0] is >=
         btrfs_header_nritems(leaf X), we call
         btrfs_next_leaf()

         btrfs_next_leaf() releases the path

                                                  inserts key
                                                  (257 INODE_REF 4096)
                                                  at the end of leaf X,
                                                  leaf X now has N + 1 keys,
                                                  and the new key is at
                                                  slot N

         btrfs_next_leaf() searches for
         key (257 INODE_REF 256), with
         path->keep_locks set to 1,
         because it was the last key it
         saw in leaf X

           finds it in leaf X again and
           notices it's no longer the last
           key of the leaf, so it returns 0
           with path->nodes[0] == leaf X and
           path->slots[0] == N (which is now
           < btrfs_header_nritems(leaf X)),
           pointing to the new key
           (257 INODE_REF 4096)

         __btrfs_drop_extents() casts the
         item at path->nodes[0], slot
         path->slots[0], to a struct
         btrfs_file_extent_item - it does
         not skip keys for the target
         inode with a type less than
         BTRFS_EXTENT_DATA_KEY
         (BTRFS_INODE_REF_KEY < BTRFS_EXTENT_DATA_KEY)

         sees a bogus value for the type
         field triggering the WARN_ON in
         the trace shown above, and sets
         extent_end = search_start (4096)

         does the if-then-else logic to
         fixup 0 length extent items created
         by a past bug from hole punching:

           if (extent_end == key.offset &&
               extent_end >= search_start)
               goto delete_extent_item;

         that evaluates to true and it ends
         up deleting the key pointed to by
         path->slots[0], (257 INODE_REF 4096),
         from leaf X

The same could happen for example for a xattr that ends up having a key
with an offset value that matches search_start (very unlikely but not
impossible).

So fix this by ensuring that keys smaller than BTRFS_EXTENT_DATA_KEY are
skipped, never casted to struct btrfs_file_extent_item and never deleted
by accident. Also protect against the unexpected case of getting a key
for a lower inode number by skipping that key and issuing a warning.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 04633df0 upstream.

When we get loaded by a 64-bit bootloader, kernel entry point is
startup_64 in head_64.S. We don't trust any and all bootloaders because
some will fiddle with CPU configuration so we go ahead and massage each
CPU into sanity again.

For example, some dell BIOSes have this XD disable feature which set
IA32_MISC_ENABLE[34] and disable NX. This might be some dumb workaround
for other OSes but Linux sure doesn't need it.

A similar thing is present in the Surface 3 firmware - see
https://bugzilla.kernel.org/show_bug.cgi?id=106051 - which sets this bit
only on the BSP:

  # rdmsr -a 0x1a0
  400850089
  850089
  850089
  850089

I know, right?!

There's not even an off switch in there.

So fix all those cases by sanitizing the 64-bit entry point too. For
that, make verify_cpu() callable in 64-bit mode also.
Requested-and-debugged-by: "H. Peter Anvin" <hpa@zytor.com>
Reported-and-tested-by: Bastien Nocera <bugzilla@hadess.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1446739076-21303-1-git-send-email-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 3824657c upstream.

The following statement of ABI/testing/dev-kmsg is not quite right:

   It is not possible to inject messages from userspace with the
   facility number LOG_KERN (0), to make sure that the origin of the
   messages can always be reliably determined.

Userland actually can inject messages with a facility of 0 by abusing the
fact that the facility is stored in a u8 data type.  By using a facility
which is a multiple of 256 the assignment of msg->facility in log_store()
implicitly truncates it to 0, i.e.  LOG_KERN, allowing users of /dev/kmsg
to spoof kernel messages as shown below:

The following call...
   # printf '<%d>Kernel panic - not syncing: beer empty\n' 0 >/dev/kmsg
...leads to the following log entry (dmesg -x | tail -n 1):
   user  :emerg : [   66.137758] Kernel panic - not syncing: beer empty

However, this call...
   # printf '<%d>Kernel panic - not syncing: beer empty\n' 0x800 >/dev/kmsg
...leads to the slightly different log entry (note the kernel facility):
   kern  :emerg : [   74.177343] Kernel panic - not syncing: beer empty

Fix that by limiting the user provided facility to 8 bit right from the
beginning and catch the truncation early.

Fixes: 7ff9554b ("printk: convert byte-buffer to variable-length...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Alex Elder <elder@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ kamal: backport to 3.13-stable: retain local 'int i' ]
Signed-off-by: Kamal Mostafa <kamal@canonical.com>

commit 54708d28 upstream.

The commit 96d0df79 ("proc: make proc_fd_permission() thread-friendly")
fixed the access to /proc/self/fd from sub-threads, but introduced another
problem: a sub-thread can't access /proc/<tid>/fd/ or /proc/thread-self/fd
if generic_permission() fails.

Change proc_fd_permission() to check same_thread_group(pid_task(), current).

Fixes: 96d0df79 ("proc: make proc_fd_permission() thread-friendly")
Reported-by: "Jin, Yihua" <yihua.jin@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>