- 29 Jul, 2022 8 commits
-
-
Joe Burton authored
Add an extensible variant of bpf_obj_get() capable of setting the `file_flags` parameter. This parameter is needed to enable unprivileged access to BPF maps. Without a method like this, users must manually make the syscall. Signed-off-by:
Joe Burton <jevburton@google.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220729202727.3311806-1-jevburton.kernel@gmail.com
-
Jakub Kicinski authored
We need to suppress warnings from sily map sizes. Also switch from GFP_USER to GFP_KERNEL_ACCOUNT, I'm pretty sure I misunderstood the flags when writing this code. Fixes: 395cacb5 ("netdevsim: bpf: support fake map offload") Reported-by: syzbot+ad24705d3fd6463b18c6@syzkaller.appspotmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Xu Kuohai authored
A panic was reported on arm64: [ 44.517109] audit: type=1334 audit(1658859870.268:59): prog-id=19 op=LOAD [ 44.622031] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 44.624321] Mem abort info: [ 44.625049] ESR = 0x0000000096000004 [ 44.625935] EC = 0x25: DABT (current EL), IL = 32 bits [ 44.627182] SET = 0, FnV = 0 [ 44.627930] EA = 0, S1PTW = 0 [ 44.628684] FSC = 0x04: level 0 translation fault [ 44.629788] Data abort info: [ 44.630474] ISV = 0, ISS = 0x00000004 [ 44.631362] CM = 0, WnR = 0 [ 44.632041] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100ab5000 [ 44.633494] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 [ 44.635202] Internal error: Oops: 96000004 [#1] SMP [ 44.636452] Modules linked in: xfs crct10dif_ce ghash_ce virtio_blk virtio_console virtio_mmio qemu_fw_cfg [ 44.638713] CPU: 2 PID: 1 Comm: systemd Not tainted 5.19.0-rc7 #1 [ 44.640164] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 44.641799] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 44.643404] pc : ftrace_set_filter_ip+0x24/0xa0 [ 44.644659] lr : bpf_trampoline_update.constprop.0+0x428/0x4a0 [ 44.646118] sp : ffff80000803b9f0 [ 44.646950] x29: ffff80000803b9f0 x28: ffff0b5d80364400 x27: ffff80000803bb48 [ 44.648721] x26: ffff8000085ad000 x25: ffff0b5d809d2400 x24: 0000000000000000 [ 44.650493] x23: 00000000ffffffed x22: ffff0b5dd7ea0900 x21: 0000000000000000 [ 44.652279] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 44.654067] x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff [ 44.655787] x14: ffff0b5d809d2498 x13: ffff0b5d809d2432 x12: 0000000005f5e100 [ 44.657535] x11: abcc77118461cefd x10: 000000000000005f x9 : ffffa7219cb5b190 [ 44.659254] x8 : ffffa7219c8e0000 x7 : 0000000000000000 x6 : ffffa7219db075e0 [ 44.661066] x5 : ffffa7219d3130e0 x4 : ffffa7219cab9da0 x3 : 0000000000000000 [ 44.662837] x2 : 0000000000000000 x1 : ffffa7219cb7a5c0 x0 : 0000000000000000 [ 44.664675] Call trace: [ 44.665274] ftrace_set_filter_ip+0x24/0xa0 [ 44.666327] bpf_trampoline_update.constprop.0+0x428/0x4a0 [ 44.667696] __bpf_trampoline_link_prog+0xcc/0x1c0 [ 44.668834] bpf_trampoline_link_prog+0x40/0x64 [ 44.669919] bpf_tracing_prog_attach+0x120/0x490 [ 44.671011] link_create+0xe0/0x2b0 [ 44.671869] __sys_bpf+0x484/0xd30 [ 44.672706] __arm64_sys_bpf+0x30/0x40 [ 44.673678] invoke_syscall+0x78/0x100 [ 44.674623] el0_svc_common.constprop.0+0x4c/0xf4 [ 44.675783] do_el0_svc+0x38/0x4c [ 44.676624] el0_svc+0x34/0x100 [ 44.677429] el0t_64_sync_handler+0x11c/0x150 [ 44.678532] el0t_64_sync+0x190/0x194 [ 44.679439] Code: 2a0203f4 f90013f5 2a0303f5 f9001fe1 (f9400800) [ 44.680959] ---[ end trace 0000000000000000 ]--- [ 44.682111] Kernel panic - not syncing: Oops: Fatal exception [ 44.683488] SMP: stopping secondary CPUs [ 44.684551] Kernel Offset: 0x2721948e0000 from 0xffff800008000000 [ 44.686095] PHYS_OFFSET: 0xfffff4a380000000 [ 44.687144] CPU features: 0x010,00022811,19001080 [ 44.688308] Memory Limit: none [ 44.689082] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- It's caused by a NULL tr->fops passed to ftrace_set_filter_ip(). tr->fops is initialized to NULL and is assigned to an allocated memory address if CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is enabled. Since there is no direct call on arm64 yet, the config can't be enabled. To fix it, call ftrace_set_filter_ip() only if tr->fops is not NULL. Fixes: 00963a2e ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)") Reported-by:
Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by:
Xu Kuohai <xukuohai@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20220728114048.3540461-1-xukuohai@huaweicloud.com
-
Song Liu authored
When multiple threads are attaching/detaching fentry/fexit programs to the same trampoline, we may call register_fentry on the same trampoline twice: register_fentry(), unregister_fentry(), then register_fentry again. This causes ftrace_set_filter_ip() for the same ip on tr->fops twice, which leaves duplicated ip in tr->fops. The extra ip is not cleaned up properly on unregister and thus causes failures with further register in register_ftrace_direct_multi(): register_ftrace_direct_multi() { ... for (i = 0; i < size; i++) { hlist_for_each_entry(entry, &hash->buckets[i], hlist) { if (ftrace_find_rec_direct(entry->ip)) goto out_unlock; } } ... } This can be triggered with parallel fentry/fexit tests with test_progs: ./test_progs -t fentry,fexit -j Fix this by resetting tr->fops in ftrace_set_filter_ip(), so that there will never be duplicated entries in tr->fops. Fixes: 00963a2e ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)") Reported-by:Song Liu <song@kernel.org> Signed-off-by:
-
Daniel Müller authored
The send_signal/send_signal_tracepoint is pretty flaky, with at least one failure in every ten runs on a few attempts I've tried it: > test_send_signal_common:PASS:pipe_c2p 0 nsec > test_send_signal_common:PASS:pipe_p2c 0 nsec > test_send_signal_common:PASS:fork 0 nsec > test_send_signal_common:PASS:skel_open_and_load 0 nsec > test_send_signal_common:PASS:skel_attach 0 nsec > test_send_signal_common:PASS:pipe_read 0 nsec > test_send_signal_common:PASS:pipe_write 0 nsec > test_send_signal_common:PASS:reading pipe 0 nsec > test_send_signal_common:PASS:reading pipe error: size 0 0 nsec > test_send_signal_common:FAIL:incorrect result unexpected incorrect result: actual 48 != expected 50 > test_send_signal_common:PASS:pipe_write 0 nsec > #139/1 send_signal/send_signal_tracepoint:FAIL The reason does not appear to be a correctness issue in the strict sense. Rather, we merely do not receive the signal we are waiting for within the provided timeout. Let's bump the timeout by a factor of ten. With that change I have not been able to reproduce the failure in 150+ iterations. I am also sneaking in a small simplification to the test_progs test selection logic. Signed-off-by:
Daniel Müller <deso@posteo.net> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220727182955.4044988-1-deso@posteo.net
-
Jörn-Thorben Hinz authored
A skeleton generated by bpftool previously contained a return followed by an expression in OBJ_NAME__detach(), which has return type void. This did not hurt, the bpf_object__detach_skeleton() called there returns void itself anyway, but led to a warning when compiling with e.g. -pedantic. Signed-off-by:
Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220726133203.514087-1-jthinz@mailbox.tu-berlin.de
-
Rongguang Wei authored
Use the ARRAY_SIZE macro and make the code more compact. Signed-off-by:
Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by:
-
Fedor Tokarev authored
vsnprintf returns the number of characters which would have been written if enough space had been available, excluding the terminating null byte. Thus, the return value of 'len_left' means that the last character has been dropped. Signed-off-by:
Fedor Tokarev <ftokarev@gmail.com> Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20220711211317.GA1143610@laptop
-
- 28 Jul, 2022 1 commit
-
-
Daniel Müller authored
Commit 708ac5be ("libbpf: add ksyscall/kretsyscall sections support for syscall kprobes") added the arch_specific_syscall_pfx() function, which returns a string representing the architecture in use. As it turns out this function is currently not aware of Power PC, where NULL is returned. That's being flagged by the libbpf CI system, which builds for ppc64le and the compiler sees a NULL pointer being passed in to a %s format string. With this change we add representations for two more architectures, for Power PC and Power PC 64, and also adjust the string format logic to handle NULL pointers gracefully, in an attempt to prevent similar issues with other architectures in the future. Fixes: 708ac5be ("libbpf: add ksyscall/kretsyscall sections support for syscall kprobes") Signed-off-by:
-
- 27 Jul, 2022 3 commits
-
-
Daniel Müller authored
So far the vmtest.sh script, which can be used as a convenient way to run bpf selftests, has obtained the kernel config safe to use for testing from the libbpf/libbpf GitHub repository [0]. Given that we now have included this configuration into this very repository, we can just consume it from here as well, eliminating the necessity of remote accesses. With this change we adjust the logic in the script to use the configuration from below tools/testing/selftests/bpf/configs/ instead of pulling it over the network. [0] https://github.com/libbpf/libbpfSigned-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Mykola Lysenko <mykolal@fb.com> Link: https://lore.kernel.org/bpf/20220727001156.3553701-4-deso@posteo.net
-
Daniel Müller authored
This change integrates libbpf maintained configurations and black/white lists [0] into the repository, co-located with the BPF selftests themselves. We minimize the kernel configurations to keep future updates as small as possible [1]. Furthermore, we make both kernel configurations build on top of the existing configuration tools/testing/selftests/bpf/config (to be concatenated before build). Lastly, we replaced the terms blacklist & whitelist with denylist and allowlist, respectively. [0] https://github.com/libbpf/libbpf/tree/20f03302350a4143825cedcbd210c4d7112c1898/travis-ci/vmtest/configs [1] https://lore.kernel.org/bpf/20220712212124.3180314-1-deso@posteo.net/T/#m30a53648352ed494e556ac003042a9ad0a8f98c6Signed-off-by:
-
Daniel Müller authored
This change makes sure to sort the existing minimal kernel configuration containing options required for running BPF selftests alphabetically. Doing so will make it easier to diff it against other configurations, which in turn helps with maintaining disjunct config files that build on top of each other. It also helped identify the CONFIG_IPV6_GRE being set twice and removes one of the occurrences. Lastly, we change NET_CLS_BPF from 'm' to 'y'. Having this option as 'm' will cause failures of the btf_skc_cls_ingress selftest. Signed-off-by:
-
- 26 Jul, 2022 18 commits
-
-
Ilya Leoshkevich authored
test_probe_user fails on architectures where libc uses socketcall(SYS_CONNECT) instead of connect(). Fix by attaching to socketcall as well. Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
-
Ilya Leoshkevich authored
Explicitly list known quirks. Mention that socket-related syscalls can be invoked via socketcall(). Signed-off-by:
-
Lorenzo Bianconi authored
Even if it is currently forbidden to XDP_REDIRECT a multi-frag xdp_frame into a devmap, compute proper xdp_frame length in __xdp_enqueue and is_valid_dst routines running xdp_get_frame_len(). Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Joanne Koong authored
For the case where offset + len == size, bpf_xdp_pointer should return a valid pointer to the addr because that access is permitted. We should only return NULL in the case where offset + len exceeds size. Fixes: 3f364222 ("net: xdp: introduce bpf_xdp_pointer utility routine") Signed-off-by:
Joanne Koong <joannelkoong@gmail.com> Signed-off-by:
-
Paul Chaignon authored
The previous commit fixed a bug in the bpf_skb_set_tunnel_key helper to avoid dropping packets whose outer source IP address isn't assigned to a host interface. This commit changes the corresponding selftest to not assign the outer source IP address to an interface. Not assigning the source IP to an interface causes two issues in the existing test: 1. The ARP requests will fail for that IP address so we need to add the ARP entry manually. 2. The encapsulated ICMP echo reply traffic will not reach the VXLAN device. It will be dropped by the stack before, because the outer destination IP is unknown. To solve 2., we have two choices. Either we perform decapsulation ourselves in a BPF program attached at veth1 (the base device for the VXLAN device), or we switch the outer destination address when we receive the packet at veth1, such that the stack properly demultiplexes it to the VXLAN device afterward. This commit implements the second approach, where we switch the outer destination address from the unassigned IP address to the assigned one, only for VXLAN traffic ingressing veth1. Then, at the vxlan device, the BPF program that checks the output of bpf_skb_get_tunnel_key needs to be updated as the expected local IP address is now the unassigned one. Signed-off-by:
Paul Chaignon <paul@isovalent.com> Signed-off-by:
-
Paul Chaignon authored
Commit 26101f5a ("bpf: Add source ip in "struct bpf_tunnel_key"") added support for getting and setting the outer source IP of encapsulated packets via the bpf_skb_{get,set}_tunnel_key BPF helper. This change allows BPF programs to set any IP address as the source, including for example the IP address of a container running on the same host. In that last case, however, the encapsulated packets are dropped when looking up the route because the source IP address isn't assigned to any interface on the host. To avoid this, we need to set the FLOWI_FLAG_ANYSRC flag. Fixes: 26101f5a ("bpf: Add source ip in "struct bpf_tunnel_key"") Signed-off-by:
Nikolay Aleksandrov <razor@blackwall.org> Acked-by:
-
Paul Chaignon authored
Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in the subsequent commit. Signed-off-by:
-
Paul Chaignon authored
Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in a subsequent commit. Signed-off-by:
-
Paul Chaignon authored
This commit extends the ip_tunnel_key struct with a new field for the flow flags, to pass them to the route lookups. This new field will be populated and used in subsequent commits. Signed-off-by:
-
Jakub Kicinski authored
Christian Marangi says: ==================== Add MTU change with stmmac interface running This series is to permit MTU change while the interface is running. Major rework are needed to permit to allocate a new dma conf based on the new MTU before applying it. This is to make sure there is enough space to allocate all the DMA queue before releasing the stmmac driver. This was tested with a simple way to stress the network while the interface is running. 2 ssh connection to the device: - One generating simple traffic with while true; do free; done - The other making the mtu change with a delay of 1 second The connection is correctly stopped and recovered after the MTU is changed. The first 2 patch of this series are minor fixup that fix problems presented while testing this. One fix a problem when we renable a queue while we are generating a new dma conf. The other is a corner case that was notice while stressing the driver and turning down the interface while there was some traffic. (this is a follow-up of a simpler patch that wanted to add the same feature. It was suggested to first try to check if it was possible to apply the new configuration. Posting as RFC as it does major rework for the new concept of DMA conf) ==================== Link: https://lore.kernel.org/r/20220723142933.16030-1-ansuelsmth@gmail.comSigned-off-by:
-
Christian Marangi authored
Remove the limitation where the interface needs to be down to change MTU by releasing and opening the stmmac driver to set the new MTU. Also call the set_filter function to correctly init the port. This permits to remove the EBUSY error while the ethernet port is running permitting a correct MTU change if for example a DSA request a MTU change for a switch CPU port. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Signed-off-by:
-
Christian Marangi authored
Rework the driver to generate the stmmac dma_conf before stmmac_open. This permits a function to first check if it's possible to allocate a new dma_config and then pass it directly to __stmmac_open and "open" the interface with the new configuration. Signed-off-by:
-
Christian Marangi authored
Move dma buf conf to dedicated struct. This in preparation for code rework that will permit to allocate separate dma_conf without affecting the priv struct. Signed-off-by:
-
Christian Marangi authored
Disable all queues and disconnect before tx_disable in stmmac_release to prevent a corner case where packet may be still queued at the same time tx_disable is called resulting in kernel panic if some packet still has to be processed. Signed-off-by:
-
Christian Marangi authored
Move queue reset to dedicated functions. This aside from a simple cleanup is also required to allocate a dma conf without resetting the tx queue while the device is temporarily detached as now the reset is not part of the dma init function and can be done later in the code flow. Signed-off-by:
-
William Dean authored
delete extra space and tab in blank line, there is no functional change. Reported-by:
Hacash Robot <hacashRobot@santino.com> Signed-off-by:
William Dean <williamsukatube@gmail.com> Link: https://lore.kernel.org/r/20220723073222.2961602-1-williamsukatube@163.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.20 Third set of patches for v5.20. MLO work continues and we have a lot of stack changes due to that, including driver API changes. Not much driver patches except on mt76. Major changes: cfg80211/mac80211 - more prepartion for Wi-Fi 7 Multi-Link Operation (MLO) support, works with one link now - align with IEEE Draft P802.11be_D2.0 - hardware timestamps for receive and transmit mt76 - preparation for new chipset support - ACPI SAR support * tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (254 commits) wifi: mac80211: fix link data leak wifi: mac80211: mlme: fix disassoc with MLO wifi: mac80211: add macros to loop over active links wifi: mac80211: remove erroneous sband/link validation wifi: mac80211: mlme: transmit assoc frame with address translation wifi: mac80211: verify link addresses are different wifi: mac80211: rx: track link in RX data wifi: mac80211: optionally implement MLO multicast TX wifi: mac80211: expand ieee80211_mgmt_tx() for MLO wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX API wifi: mac80211: report link ID to cfg80211 on mgmt RX wifi: cfg80211: report link ID in NL80211_CMD_FRAME wifi: mac80211: add hardware timestamps for RX and TX wifi: cfg80211: add hardware timestamps to frame RX info wifi: cfg80211/nl80211: move rx management data into a struct wifi: cfg80211: add a function for reporting TX status with hardware timestamps wifi: nl80211: add RX and TX timestamp attributes wifi: ieee80211: add helper functions for detecting TM/FTM frames wifi: mac80211_hwsim: handle links for wmediumd/virtio wifi: mac80211: sta_info: fix link_sta insertion ... ==================== Link: https://lore.kernel.org/r/20220725174547.EA465C341C6@smtp.kernel.orgSigned-off-by:
-
Alexander Stein authored
These properties are inherited from ethernet-controller.yaml. This fixes the dt_binding_check warning: imx8mm-tqma8mqml-mba8mx.dt.yaml: ethernet@30be0000: 'nvmem-cell-names', 'nvmem-cells' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220720063924.1412799-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
- 25 Jul, 2022 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.20. One fix and rest minor cleanup.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-07-22 This series contains updates to i40e and iavf drivers. Przemyslaw adds a helper function for determining whether TC MQPRIO is enabled for i40e. Avinash utilizes the driver's bookkeeping of filters to check for duplicate filter before sending the request to the PF for iavf. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Lorenzo Bianconi authored
A typical flow offload scenario for OpenWrt users is routed traffic received by the wan interface that is redirected to a wlan device belonging to the lan bridge. Current implementation fails to fill wdma offload info in mtk_flow_get_wdma_info() since odev device is the local bridge. Fix the issue running dev_fill_forward_path routine in mtk_flow_get_wdma_info in order to identify the wlan device. Tested-by:
Paolo Valerio <pvalerio@redhat.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Spectrum-2 PTP preparations This patchset includes various preparations required for Spectrum-2 PTP support. Most of the changes are non-functional (e.g., renaming, adding registers). The only intentional user visible change is in patch #10 where the PHC time is initialized to zero in accordance with the recommendation of the PTP maintainer. ==================== Signed-off-by: -
Amit Cohen authored
The function mlxsw_sp_ptp_phc_adjfreq() configures MTUTC register to adjust hardware frequency by a given value. This configuration will be same for Spectrum-2. In preparation for Spectrum-2 PTP support, rename the function to not be Spectrum-1 specific. Later, it will be used for Spectrum-2 also. Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Spectrum-1 and Spectrum-2 differ in their time stamping capabilities. The former can be configured to time stamp only a subset of received PTP events (e.g., only Sync), whereas the latter will time stamp all PTP events or none. In preparation for Spectrum-2 PTP support, rename the function that parses the hardware time stamping configuration upon %SIOCSHWTSTAMP to be Spectrum-1 specific. Signed-off-by:
-
Amit Cohen authored
Currently, there is one shared structure that holds the required structures for PTP clock. Most of the existing fields are relevant only for Spectrum-1 (cycles, timecounter, and more). Rename the structure to be specific for Spectrum-1 and align the existing code. Add a common structure which includes the structures which will be used also for Spectrum-2. This structure will be returned from clock_init() operation, as the definition is shared between all ASICs' operations. Signed-off-by:
-
Amit Cohen authored
Currently, there is one shared structure that holds the required structures and details for PTP. Most of the existing fields are relevant only for Spectrum-1 (hash table, lock for hash table, delayed work, and more). Rename the structure to be specific for Spectrum-1 and align the existing code. Add a common structure which includes 'struct mlxsw_sp *mlxsw_sp' and will be returned from ptp_init() operation, as the definition is shared between all ASICs' operations. Signed-off-by:
-
Amit Cohen authored
Currently, the reading of FRC values (high and low) is done using macro which calls to a function. In addition, to calculate the offset of FRC, a simple macro is used. This code can be simplified by adding an helper function and calculating the offset explicitly instead of using an additional macro for that. Add the helper function and convert the existing code. This helper will be used later to read UTC clock. Signed-off-by:
-
Amit Cohen authored
As lately recommended in the mailing list[1], set the clock to zero time as part of initialization. The idea is that when the clock reads 'Jan 1, 1970', then it is clearly wrong and user will not mistakenly think that the clock is set correctly. If as part of initialization, the driver sets the clock, user might see correct date and time (maybe with a small shift) and assume that there is no need to sync the clock. Fix the existing code of Spectrum-1 to set the 'timecounter' to zero. [1]: https://lore.kernel.org/netdev/20220201191041.GB7009@hoboy.vegasvil.org/Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
