- 26 May, 2022 34 commits
-
-
Evan Quan authored
Correct the metrics version used for SMU 11.0.11/12/13. Fixes misreported GPU metrics (e.g., fan speed, etc.) depending on which version of SMU firmware is loaded. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1925Signed-off-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jay Cornwall authored
Based on gfx10 with following changes: - GPR_ALLOC.VGPR_SIZE field moved (and size corrected in gfx10) - s_sendmsg_rtn_b64 replaces some s_sendmsg/s_getreg - Buffer instructions no longer have direct-to-LDS modifier Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Reviewed-by:
Laurent Morichetti <laurent.morichetti@amd.com> Signed-off-by:
Eric Huang <jinhuieric.huang@amd.com> Acked-by:
-
Eric Huang authored
Most of changes are for debugger feature, and it is to simplify trap handler support for new asics in the future. Signed-off-by:
-
Alan Liu authored
Define HDMI_ACP_SEND register shift/mask. Signed-off-by:
Alan Liu <HaoPing.Liu@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Lijo Lazar authored
On aldebaran, when thermal throttling happens due to excessive GPU temperature, the reason for throttling event is missed in warning message. This patch fixes it. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Sunil Khatri authored
Add support of IP GC 10.3.7 in amdgpu_gmc_tmz_set. Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Reviewed-by:
-
Sunil Khatri authored
Use IP version rather then code name of IPs for tmz set. Signed-off-by:
-
Sunil Khatri authored
To enable TMZ feature based on IP version needs adev->ip_version populated but its empty. Move amdgpu_gmc_tmz_set to a place where ip_version is populated. Signed-off-by:
-
Stanley.Yang authored
support umc/gfx/sdma ras on guest side Changed from V1: move sriov judgment in amdgpu_ras_interrupt_fatal_error_handler Signed-off-by:Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Dan Carpenter authored
There is no need to check if "clock_ranges' is non-NULL. It is checked already on the line before. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Evan Quan authored
With the latest vbios, the memory temp reading is working. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Evan Quan authored
Enable OOB Monitor and SOC CG which are ready since 78.38.0. Signed-off-by:
-
Evan Quan authored
To better match with the pptable_id settings from VBIOS. Signed-off-by:
-
Evan Quan authored
To align with 78.37.0 and later PMFWs. Signed-off-by:
-
Evan Quan authored
Since PMFW will handle this properly. Driver involvement is unnecessary. Signed-off-by:
-
Evan Quan authored
Enable MP0CLK DPM and FW Dstate since they are already supported by latest 78.36.0 PMFW. Signed-off-by:
-
Gong Yuanjun authored
gpu_metrics_table is allocated in yellow_carp_init_smc_tables() but not freed in yellow_carp_fini_smc_tables(). Signed-off-by:
Gong Yuanjun <ruc_gongyuanjun@163.com> Signed-off-by:
-
Gong Yuanjun authored
In radeon_fp_native_mode(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. The failure status of drm_cvt_mode() on the other path is checked too. Signed-off-by:
-
Haohui Mai authored
Make sure the queue is not longer active before programming the kiq EOP registers. Signed-off-by:
Haohui Mai <ricetons@gmail.com> Signed-off-by:
-
Haohui Mai authored
Remove the accidental shifts on the values of RPTR_BLOCK_SIZE in gfx_v8-v11. The bug essentially always programs the corresponding fields to zero instead of the correct value. The hardware clamps the min value to 5 so this resulted in a value of 5 being programmed. Signed-off-by:
-
Christian König authored
Let each context have a pointer to the ctx manager and properly initialize the adev pointer inside the context manager. Reduce the BUG_ON() in amdgpu_ctx_add_fence() into a WARN_ON() and directly return the sequence number instead of writing into a parmeter. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Shashank Sharma <shashank.sharma@amd.com> Signed-off-by:
-
Jonathan Kim authored
CPU hive assignment currently assumes when a GPU hive is connected_to_cpu, there is only one hive in the system. Only assign CPUs to the hive if they are explicitly directly connected to the GPU hive to get rid of the need for this assumption. It's more efficient to do this when querying IO links since other non-CRAT info has to be filled in anyways. Also, stop re-assigning the same CPU to the same GPU hive if it has already been done before. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Haohui Mai authored
Clean up redundant, copy-paste code blocks during the initialization of the doorbells in mqd_init(). Signed-off-by:
-
Aric Cyr authored
This version brings along the following: - Improvements in link training fallback - Adding individual edp hotplug support - Fixes in DPIA HPD status, display clock change hang, etc. - FPU isolation work for DCN30 Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Michael Strauss authored
This reverts commit 3b90318d. [WHY] Regressions unintentionally caused by change, reverting until this can be resolved. Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Bhawanpreet Lakha authored
[Why] we save the prev_dppclk value using "dpp_inst" but when reading this value we use the index "i". In a case where a pipe is fused off we can end up reading the incorrect instance because i != dpp_inst in this case. [How] read the prev_dppclk using dpp_inst instead of i Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Tested-by:
-
Jasdeep Dhillon authored
[why & how] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN30 to DML, where all FPU code should locate. Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Jasdeep Dhillon <jdhillon@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] A display clock change hang can occur when switching between DIO and HPO enabled modes during the optimize_bandwidth in dc_commit_state_no_check call. This happens when going from 4k120 8bpc 420 to 4k144 10bpc 444. Display clock in the DIO case is 1200MHz, but pixel rate is 600MHz because the pixel format is 420. Display clock in the HPO case is less (800MHz?) because of ODM combine which results in a smaller divider. The DIO is still active in prepare but not active in the optimize which results in the hang occuring. During this change there are no planes on the stream so it's safe to apply the workaround, but dpms_off = false and signal type is not virtual. [How] Check for plane_count == 0, no planes on the stream. It's easiest to check pipe->plane_state == NULL as an equivalent check rather than trying to search for the stream status in the context associated with the stream, so let's do that. The primary, non MPO pipe should not have a NULL plane state. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Derek Lai authored
[Why] Second eDP can send display off notification through HPD but DC isn't hooked up to handle. Some primary eDP panels will toggle on/off incorrectly if it's enabled generically. [How] Extend the debug option to allow individually enabling hotplug either the first eDP or the second eDP in a dual eDP system. Reviewed-by:
Derek Lai <Derek.Lai@amd.com> Tested-by:
-
David Galiffi authored
[How & Why] If a value of 0 is read, then this will cause a divide-by-0 panic. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
David Galiffi <David.Galiffi@amd.com> Tested-by:
-
Paul Hsieh authored
[Why] when driver and dmub request aux engine at the same time, dmub grant the aux engine but driver fail. Then driver release aux engine but doesn't clear the request bit. Then aux engine will be occupied by driver forever. [How] When driver release aux engine, clear request bit as well. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Paul Hsieh <paul.hsieh@amd.com> Tested-by:
-
Alvin Lee authored
[Why & How] Code clean up in dc. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
-
Jimmy Kizito authored
[Why] Driver needs up to date DPIA HPD status. [How] Use HPD query command to get DPIA HPD status. Reviewed-by:
Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by:
-
Jimmy Kizito authored
[Why] Some displays may need several link training attempts before link training succeeds. [How] If training succeeds after falling back to lower link bandwidth, retry at original link bandwidth instead of abandoning link training whenever link bandwidth is less than stream bandwidth. Reviewed-by:
-
- 25 May, 2022 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2022-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for v5.19 merge window: - Build, sparse, UB, and CFI fixes - Variable scope fix - Audio pipe logging fix - ICL+ DSI NULL dereference fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sfozuj44.fsf@intel.com
-
- 23 May, 2022 1 commit
-
-
Jani Nikula authored
The VBT send packet port selection was never updated for ICL+ where the 2nd link is on port B instead of port C as in VLV+ DSI. First, single link DSI needs to use the configured port instead of relying on the VBT sequence block port. Remove the hard-coded port C check here and make it generic. For reference, see commit f915084e ("drm/i915: Changes related to the sequence port no for") for the original VLV specific fix. Second, the sequence block port number is either 0 or 1, where 1 indicates the 2nd link. Remove the hard-coded port C here for 2nd link. (This could be a "find second set bit" on DSI ports, but just check the two possible options.) Third, sanity check the result with a warning to avoid a NULL pointer dereference. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984 Cc: stable@vger.kernel.org # v4.19+ Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com (cherry picked from commit 08c59dde)
-
- 20 May, 2022 2 commits
-
-
https://gitlab.freedesktop.org/abhinavk/msmDave Airlie authored
5.19 fixes for msm-next - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2022-05-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next A device tree binding change for Rockchip VOP2 Signed-off-by:
-
- 19 May, 2022 2 commits
-
-
Borislav Petkov authored
Fix: In file included from <command-line>:0:0: drivers/gpu/drm/i915/gt/uc/intel_guc.c: In function ‘intel_guc_send_mmio’: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_1047’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) and other build errors due to shift overflowing values. See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. v2 by Jani: - Drop the i915_reg.h changes Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Ruiqi GONG <gongruiqi1@huawei.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:Borislav Petkov <bp@suse.de> Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-2-jani.nikula@intel.com (cherry picked from commit 962bd34b)
-
Jani Nikula authored
Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to -fsanitize=shift. References: https://lore.kernel.org/r/20220405151517.29753-12-bp@alien8.deReported-by:
Ruiqi GONG <gongruiqi1@huawei.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
