- 24 Jun, 2021 40 commits
-
-
Aaron Lewis authored
This test exercises the feature KVM_CAP_EXIT_ON_EMULATION_FAILURE. When enabled, errors in the in-kernel instruction emulator are forwarded to userspace with the instruction bytes stored in the exit struct for KVM_EXIT_INTERNAL_ERROR. So, when the guest attempts to emulate an 'flds' instruction, which isn't able to be emulated in KVM, instead of failing, KVM sends the instruction to userspace to handle. For this test to work properly the module parameter 'allow_smaller_maxphyaddr' has to be set. Signed-off-by:
Aaron Lewis <aaronlewis@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Message-Id: <20210510144834.658457-3-aaronlewis@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Aaron Lewis authored
Add a fallback mechanism to the in-kernel instruction emulator that allows userspace the opportunity to process an instruction the emulator was unable to. When the in-kernel instruction emulator fails to process an instruction it will either inject a #UD into the guest or exit to userspace with exit reason KVM_INTERNAL_ERROR. This is because it does not know how to proceed in an appropriate manner. This feature lets userspace get involved to see if it can figure out a better path forward. Signed-off-by:
David Edmondson <david.edmondson@oracle.com> Message-Id: <20210510144834.658457-2-aaronlewis@google.com> Reviewed-by:
-
Sean Christopherson authored
Let the guest use 1g hugepages if TDP is enabled and the host supports GBPAGES, KVM can't actively prevent the guest from using 1g pages in this case since they can't be disabled in the hardware page walker. While injecting a page fault if a bogus 1g page is encountered during a software page walk is perfectly reasonable since KVM is simply honoring userspace's vCPU model, doing so arguably doesn't provide any meaningful value, and at worst will be horribly confusing as the guest will see inconsistent behavior and seemingly spurious page faults. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210622175739.3610207-55-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Use the current MMU instead of vCPU state to query CR4.SMEP when handling a page fault. In the nested NPT case, the current CR4.SMEP reflects L2, whereas the page fault is shadowing L1's NPT, which uses L1's hCR4. Practically speaking, this is a nop a NPT walks are always user faults, i.e. this code will never be reached, but fix it up for consistency. Signed-off-by:
-
Sean Christopherson authored
Use the current MMU instead of vCPU state to query CR0.WP when handling a page fault. In the nested NPT case, the current CR0.WP reflects L2, whereas the page fault is shadowing L1's NPT. Practically speaking, this is a nop a NPT walks are always user faults, but fix it up for consistency. Signed-off-by:
-
Sean Christopherson authored
Drop the extra reset of shadow_zero_bits in the nested NPT flow now that shadow_mmu_init_context computes the correct level for nested NPT. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop the pre-computed last_nonleaf_level, which is arguably wrong and at best confusing. Per the comment: Can have large pages at levels 2..last_nonleaf_level-1. the intent of the variable would appear to be to track what levels can _legally_ have large pages, but that intent doesn't align with reality. The computed value will be wrong for 5-level paging, or if 1gb pages are not supported. The flawed code is not a problem in practice, because except for 32-bit PSE paging, bit 7 is reserved if large pages aren't supported at the level. Take advantage of this invariant and simply omit the level magic math for 64-bit page tables (including PAE). For 32-bit paging (non-PAE), the adjustments are needed purely because bit 7 is ignored if PSE=0. Retain that logic as is, but make is_last_gpte() unique per PTTYPE so that the PSE check is avoided for PAE and EPT paging. In the spirit of avoiding branches, bump the "last nonleaf level" for 32-bit PSE paging by adding the PSE bit itself. Note, bit 7 is ignored or has other meaning in CR3/EPTP, but despite FNAME(walk_addr_generic) briefly grabbing CR3/EPTP in "pte", they are not PTEs and will blow up all the other gpte helpers. Signed-off-by:
-
Sean Christopherson authored
Expand the comments for the MMU roles. The interactions with gfn_track PGD reuse in particular are hairy. Regarding PGD reuse, add comments in the nested virtualization flows to call out why kvm_init_mmu() is unconditionally called even when nested TDP is used. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Replace make_spte()'s WARN on a collision with the magic MMIO value with a generic WARN on reserved bits being set (including EPT's reserved WX combination). Warning on any reserved bits covers MMIO, A/D tracking bits with PAE paging, and in theory any future goofs that are introduced. Opportunistically convert to ONCE behavior to avoid spamming the kernel log, odds are very good that if KVM screws up one SPTE, it will botch all SPTEs for the same MMU. Signed-off-by:
-
Sean Christopherson authored
Extract the reserved SPTE check and print helpers in get_mmio_spte() to new helpers so that KVM can also WARN on reserved badness when making a SPTE. Tag the checking helper with __always_inline to improve the probability of the compiler generating optimal code for the checking loop, e.g. gcc appears to avoid using %rbp when the helper is tagged with a vanilla "inline". No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use the MMU's role instead of vCPU state or role_regs to determine the PTTYPE, i.e. which helpers to wire up. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Skip paging32E_init_context() and paging64_init_context_common() and go directly to paging64_init_context() (was the common version) now that the relevant flows don't need to distinguish between 64-bit PAE and 32-bit PAE for other reasons. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add a helper to calculate the level for non-EPT page tables from the MMU's role_regs. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Consolidate MMU guest metadata updates into a common helper for TDP, shadow, and nested MMUs. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Don't bother updating the bitmasks and last-leaf information if paging is disabled as the metadata will never be used. Signed-off-by:
-
Sean Christopherson authored
Move calls to reset_rsvds_bits_mask() out of the various mode statements and under a more generic CR0.PG=1 check. This will allow for additional code consolidation in the future. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Get LA57 from the role_regs, which are initialized from the vCPU even though TDP is enabled, instead of pulling the value directly from the vCPU when computing the guest's root_level for TDP MMUs. Note, the check is inside an is_long_mode() statement, so that requirement is not lost. Use role_regs even though the MMU's role is available and arguably "better". A future commit will consolidate the guest root level logic, and it needs access to EFER.LMA, which is not tracked in the role (it can't be toggled on VM-Exit, unlike LA57). Drop is_la57_mode() as there are no remaining users, and to discourage pulling MMU state from the vCPU (in the future). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Initialize the MMU's (guest) root_level using its mmu_role instead of redoing the calculations. The role_regs used to calculate the mmu_role are initialized from the vCPU, i.e. this should be a complete nop. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop kvm_mmu.nx as there no consumers left. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Get the MMU's effective EFER.NX from its role instead of using the one-off, dedicated flag. This will allow dropping said flag in a future commit. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use the MMU's role and role_regs to calculate the MMU's guest root level and NX bit. For some flows, the vCPU state may not be correct (or relevant), e.g. EPT doesn't interact with EFER.NX and nested NPT will configure the guest_mmu with possibly-stale vCPU state. Signed-off-by:
-
Sean Christopherson authored
Use the NX bit from the MMU's role instead of the MMU itself so that the redundant, dedicated "nx" flag can be dropped. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use the MMU's role to get CR4.PSE when determining the last level at which the guest _cannot_ create a non-leaf PTE, i.e. cannot create a huge page. Note, the existing logic is arguably wrong when considering 5-level paging and the case where 1gb pages aren't supported. In practice, the logic is confusing but not broken, because except for 32-bit non-PAE paging, bit 7 (_PAGE_PSE) bit is reserved when a huge page isn't supported at that level. I.e. setting bit 7 will terminate the guest walk one way or another. Furthermore, last_nonleaf_level is only consulted after KVM has verified there are no reserved bits set. All that confusion will be addressed in a future patch by dropping last_nonleaf_level entirely. For now, massage the code to continue the march toward using mmu_role for (almost) all MMU computations. Signed-off-by:
-
Sean Christopherson authored
Use the MMU's role to calculate the Protection Keys (Restrict Userspace) bitmask instead of pulling bits from current vCPU state. For some flows, the vCPU state may not be correct (or relevant), e.g. EPT doesn't interact with PKRU. Case in point, the "ept" param simply disappears. Signed-off-by:
-
Sean Christopherson authored
Use the MMU's role to generate the permission bitmasks for the MMU. For some flows, the vCPU state may not be correct (or relevant), e.g. the nested NPT MMU can be initialized with incoherent vCPU state. Signed-off-by:
-
Sean Christopherson authored
Drop the vCPU param from __reset_rsvds_bits_mask() as it's now unused, and ideally will remain unused in the future. Any information that's needed by the low level helper should be explicitly provided as it's used for both shadow/host MMUs and guest MMUs, i.e. vCPU state may be meaningless or simply wrong. Signed-off-by:
-
Sean Christopherson authored
Use the MMU's role to get CR4.PSE when calculating reserved bits for the guest's PTEs. Practically speaking, this is a glorified nop as the role always come from vCPU state for the relevant flows, but converting to the roles will provide consistency once everything else is converted, and will Just Work if the "always comes from vCPU" behavior were ever to change (unlikely). Signed-off-by:
-
Sean Christopherson authored
Unconditionally pass pse=false when calculating reserved bits for shadow PTEs. CR4.PSE is only relevant for 32-bit non-PAE paging, which KVM does not use for shadow paging (including nested NPT). Signed-off-by:
-
Sean Christopherson authored
Refactor shadow MMU initialization to immediately set its new mmu_role after verifying it differs from the old role, and so that all flavors of MMU initialization share the same check-and-set pattern. Immediately setting the role will allow future commits to use mmu_role to configure the MMU without consuming stale state. Signed-off-by:
-
Sean Christopherson authored
Don't set cr4_pke or cr4_la57 in the MMU role if long mode isn't active, which is required for protection keys and 5-level paging to be fully enabled. Ignoring the bit avoids unnecessary reconfiguration on reuse, and also means consumers of mmu_role don't need to manually check for long mode. Signed-off-by:
-
Sean Christopherson authored
Don't set CR0/CR4/EFER bits in the MMU role if paging is disabled, paging modifiers are irrelevant if there is no paging in the first place. Somewhat arbitrarily clear gpte_is_8_bytes for shadow paging if paging is disabled in the guest. Again, there are no guest PTEs to process, so the size is meaningless. Signed-off-by:
-
Sean Christopherson authored
Add accessors via a builder macro for all mmu_role bits that track a CR0, CR4, or EFER bit, abstracting whether the bits are in the base or the extended role. Future commits will switch to using mmu_role instead of vCPU state to configure the MMU, i.e. there are about to be a large number of users. Signed-off-by:
-
Sean Christopherson authored
Rename "nxe" to "efer_nx" so that future macro magic can use the pattern <reg>_<bit> for all CR0, CR4, and EFER bits that included in the role. Using "efer_nx" also makes it clear that the role bit reflects EFER.NX, not the NX bit in the corresponding PTE. Signed-off-by:
-
Sean Christopherson authored
Use the provided role_regs to calculate the mmu_role instead of pulling bits from current vCPU state. For some flows, e.g. nested TDP, the vCPU state may not be correct (or relevant). Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Do not incorporate CR0/CR4 bits into the role for the nested EPT MMU, as EPT behavior is not influenced by CR0/CR4. Note, this is the guest_mmu, (L1's EPT), not nested_mmu (L2's IA32 paging); the nested_mmu does need CR0/CR4, and is initialized in a separate flow. Signed-off-by:
-
Sean Christopherson authored
Consolidate the MMU metadata update calls to deduplicate code, and to prep for future cleanup. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Introduce "struct kvm_mmu_role_regs" to hold the register state that is incorporated into the mmu_role. For nested TDP, the register state that is factored into the MMU isn't vCPU state; the dedicated struct will be used to propagate the correct state throughout the flows without having to pass multiple params, and also provides helpers for the various flag accessors. Intentionally make the new helpers cumbersome/ugly by prepending four underscores. In the not-too-distant future, it will be preferable to use the mmu_role to query bits as the mmu_role can drop irrelevant bits without creating contradictions, e.g. clearing CR4 bits when CR0.PG=0. Reserve the clean helper names (no underscores) for the mmu_role. Add a helper for vCPU conversion, which is the common case. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use the mmu_role to initialize shadow root level instead of assuming the level of KVM's shadow root (host) is the same as that of the guest root, or in the case of 32-bit non-PAE paging where KVM forces PAE paging. For nested NPT, the shadow root level cannot be adapted to L1's NPT root level and is instead always the TDP root level because NPT uses the current host CR0/CR4/EFER, e.g. 64-bit KVM can't drop into 32-bit PAE to shadow L1's NPT. Signed-off-by:
-
Sean Christopherson authored
Move nested NPT's invocation of reset_shadow_zero_bits_mask() into the MMU proper and unexport said function. Aside from dropping an export, this is a baby step toward eliminating the call entirely by fixing the shadow_root_level confusion. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Grab all CR0/CR4 MMU role bits from current vCPU state when initializing a non-nested shadow MMU. Extract the masks from kvm_post_set_cr{0,4}(), as the CR0/CR4 update masks must exactly match the mmu_role bits, with one exception (see below). The "full" CR0/CR4 will be used by future commits to initialize the MMU and its role, as opposed to the current approach of pulling everything from vCPU, which is incorrect for certain flows, e.g. nested NPT. CR4.LA57 is an exception, as it can be toggled on VM-Exit (for L1's MMU) but can't be toggled via MOV CR4 while long mode is active. I.e. LA57 needs to be in the mmu_role, but technically doesn't need to be checked by kvm_post_set_cr4(). However, the extra check is completely benign as the hardware restrictions simply mean LA57 will never be _the_ cause of a MMU reset during MOV CR4. Signed-off-by:
-
