- 21 Dec, 2021 36 commits
-
-
Ayala Beker authored
In case of forced passive scan on a UHB channel, don't set the direct probe option for this channel. Signed-off-by:
Ayala Beker <ayala.beker@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0ede76a9ca92.Ie64a4df79ea9c485ae3d2fc043319e8f79cefa8e@changeidSigned-off-by:
-
Miri Korenblit authored
In case of a conflict between BIOS version and FW version of the PPAG table - the values arrive in the FW in the wrong places. This happens because we're storing the table in different structures depending on the BIOS version, not on the FW version, and so the FW doesn't get what it expect to. Always store the table in a v2 structure (which is a superset of v1 and v0). Also store the table in a structured way and in it's own structure, rather then storing it in the ppag command structure, similarly to the WRDS, EWRD and WGDS tables. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Luca Coelho authored
Start supporting API version 69 for AX devices. Signed-off-by:
-
Ilan Peer authored
The RADA might include in the Rx frame the MIC and CRC bytes. These bytes should be removed for non monitor interfaces and should not be passed to mac80211. Fix the Rx processing to remove the extra bytes on non monitor cases. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Nathan Errera authored
In some cases the sta is being removed twice since we do not test the roc aux running before removing it. Start looking at the bit before removing the sta. Signed-off-by:
Nathan Errera <nathan.errera@intel.com> Fixes: 2c2c3647 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12") Signed-off-by:
-
Luca Coelho authored
The FW API for PER_CHAIN_LIMIT_OFFSET_CMD is misleading. The element name is table_rev, but it shouldn't actually contain the table revision number, but whether we should use the South Korea scheme or not. Fix the driver so that we only set this value to either 0 or 1. It will only be 1 (meaning South Korea) if the ACPI WGDS table revision is 1. Signed-off-by:
-
Mukesh Sisodiya authored
Support resetting the firmware via TLV-based debugging. When applied, this will cause the driver to reset the firmware when the debugging is triggered. Signed-off-by:
Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by:
-
Johannes Berg authored
Increment the threshold to avoid dropping too eagerly. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
We don't really have much reason to mistrust the hardware queue number, but if it gets mixed up we still don't want to access some data out of bounds, so drop such frames. Signed-off-by:
-
Johannes Berg authored
On Bz devices, the hardware checksums including the SNAP header, starting directly after the MAC header, so we don't need the extra checks and can just pass the checksum to mac80211. Signed-off-by:
-
Johannes Berg authored
For the upcoming Bz devices, we will set NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. However, we still need to be able to remove all the checksum bits, so add a mask for the removal, and keep the old define for the feature advertisement. Signed-off-by:
-
Johannes Berg authored
When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes when the opmode module cannot be loaded, due to completing the completion before using drv->dev, which can then already be freed. Fix this by removing the (fairly useless) message. Moving the completion later causes a deadlock instead, so that's not an option. Signed-off-by:
-
Johannes Berg authored
Isolate the entire calculation of the offload_assist field used for HW checksumming to the iwl_mvm_tx_csum function. Signed-off-by:
-
Avraham Stern authored
In case the fw supports OCE scan and one of the OCE feature flags are set in the scan request, set the corresponding flag in the firmware scan request. Note that new firmware that indicates OCE support does not support the probe deferral and suppression feature (which is optional). Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Johannes Berg authored
If firmware load fails after having loaded some parts of the firmware, e.g. the IML image, then this would leak. For the host command list we'd end up running into a WARN on the next attempt to load another firmware image. Fix this by calling iwl_dealloc_ucode() on failures, and make that also clear the data so we start fresh on the next round. Signed-off-by:
-
Johannes Berg authored
Debug TLV parsing was missing size checks, so if a valid but too short TLV was encountered, it would attempt to read it. If the firmware file was arranged to be a multiple of pages long with this happening just before the end, it could crash reading out-of-bounds of a vmalloc area. Fix this by adding the relevant size check. Signed-off-by:
-
Johannes Berg authored
On a 32-bit build, the division here needs to be done using do_div(), otherwise the compiler will try to call a function that doesn't exist, thus failing to build. Fixes: b68bd2e3 ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic") Signed-off-by:
-
Johannes Berg authored
There's another set of error tables on newer (Bz) hardware, support finding and dumping those error tables if present. Signed-off-by:
-
Johannes Berg authored
There can be two TCMs in a given device, dump both of the error tables if present. Signed-off-by:
-
Johannes Berg authored
We shouldn't dump this twice if we have two TCMs, and it really doesn't belong to the TCM dump anyway, so move this out. Signed-off-by:
-
Johannes Berg authored
With more things being added, we're no longer going to duplicate the error tables from the debug TLVs nor send them at runtime. Use the debug TLVs to find the locations of the error tables. As we've never released firmware using IWL_UCODE_TLV_TCM_DEBUG_ADDRS just remove that entirely. Signed-off-by:
-
Ilan Peer authored
With the introduction of 6GHz channels the scan guard timeout should be adjusted to account for the following extreme case: - All 6GHz channels are scanned passively: 58 channels. - The scan is fragmented with the following parameters: 3 fragments, 95 TUs suspend time, 44 TUs maximal out of channel time. The above would result with scan time of more than 24 seconds. Thus, set the timeout to 30 seconds. Cc: stable@vger.kernel.org Signed-off-by:
-
Luca Coelho authored
We can detect that a FW SYSASSERT is due to missing PNVM data by checking the assertion code. When this happens, it's is useful for the user if we print the filename where the driver is looking for the data. Add the PNVM missing assertion code to the dump list and print out the name of the file we're looking for when this happens. Reported-by:
Sam Edwards <CFSworks@gmail.com> Signed-off-by:
-
Mordechay Goodstein authored
The new version enables support for EHT mode configurations. The name of IWL_TLC_HT_BW_NONE_160 change to IWL_TLC_MCS_PER_BW_80 to make the difference from 80 bandwidth (non 160), and the new bandwidth 320 which is also non 160. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Gregory Greenman authored
After some lab experimentation with different DDRs, need to update the table. Also, arrange it by frequency and not by DDR type since now the table contains a super-set of all possible conflicts. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
-
Mike Golant authored
Add support for BNJ HW with GF, GF4, HR1, FM and FM4 RF modules Signed-off-by:
Mike Golant <michael.golant@intel.com> Signed-off-by:
-
Ayala Barazani authored
Add list of vendors that are allowed to use TAS and check it against the value provided in the SMBIOS manufacturer field. Initially add the following approved vendors: HP, Dell, Lenovo and Samsung. Signed-off-by:
Ayala Barazani <ayala.barazani@intel.com> Signed-off-by:
-
Miri Korenblit authored
A new revision of WTAS was added in order to support IEC optimisation. Add support for reading the new revision from ACPI and passing it to the FW. Signed-off-by:
-
Matti Gottlieb authored
The original implementation checked the HW family, and as a result of that used different addresses for the prph registers. The old HWs addresses start with 0xa****** and the newer ones start with 0xd******. For this there are iwl_read/write_umac_prph functions that just add the diff in the address automatically (in this case 0x300000), so the code will be common for all HWs In the original implementation the address given already had the 0xd****** causing the address to become 0x10***** (after adding the offset) Change the registers to start with 0xa*****. Signed-off-by:
Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by:
-
Mike Golant authored
Some devices have same HW ID's and the only way to differentiate them is by checking the jacket bit. Signed-off-by:
-
Johannes Berg authored
The struct iwl_error_event_table_v1 is unused, remove it. Signed-off-by:
-
Johannes Berg authored
Contrary to what was stated before, the hardware hasn't changed the bits here yet. In any case, the new CSR is also directly (lower 16 bits) connected to UREG_DOORBELL_TO_ISR6, so if it still changes the changes would be there. Adjust the code and comments accordingly. Signed-off-by:
-
Bjoern A. Zeeb authored
On various systems __unused is a define to __attribute__((__unused__)) and yields compile errors as a result. Use __spare instead to describe that these bits are "unused". Sponsored by: The FreeBSD Foundation Signed-off-by:
Bjoern A. Zeeb <bz@FreeBSD.ORG> Signed-off-by:
-
Bjoern A. Zeeb authored
Most of iwl-eeprom-parse.c is only used for dvm but not for mvm. Hide the parts under #if IS_ENABLED(CONFIG_IWLDVM) to reduce size and code surface for mvm-only builds. Sponsored by: The FreeBSD Foundation Signed-off-by:
-
Dan Carpenter authored
These lines need to be indented one more tab. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211110080922.GF5176@kiliSigned-off-by:
-
Dan Carpenter authored
This line was indented too far and was a bit confusing. Signed-off-by:
-
- 18 Dec, 2021 4 commits
-
-
Yajun Deng authored
The xdp_rxq_info_unreg() called by xdp_rxq_info_reg() is meaningless when dev is NULL, so move the if dev statements to the first. Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-12-17 Brett Creeley says: This patch series adds support in the iavf driver for communicating and using VIRTCHNL_VF_OFFLOAD_VLAN_V2. The current VIRTCHNL_VF_OFFLOAD_VLAN is very limited and covers all 802.1Q VLAN offloads and filtering with no granularity. The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 adds more granularity, flexibility, and support for 802.1ad offloads and filtering. This includes the VF negotiating which VLAN offloads/filtering it's allowed, where VLAN tags should be inserted and/or stripped into and from descriptors, and the supported VLAN protocols. ==================== Signed-off-by: -
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Miscellaneous changes for 5.17 These are three unrelated patches that we've been testing in the MPTCP tree. Patch 1 modifies the packet scheduler that picks which TCP subflow is used for each chunk of outgoing data. The updated scheduler improves throughput on multiple-subflow connections. Patch 2 updates a selftest to verify recent TCP_ULP sockopt changes on MPTCP fallback sockets. Patch 3 cleans up some unnecessary comparisons with an 8-bit value. ==================== Link: https://lore.kernel.org/r/20211217233702.299461-1-mathew.j.martineau@linux.intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jean Sacren authored
entry->addr.id is u8 with a range from 0 to 255 and MAX_ADDR_ID is 255. We should drop both false expressions of (entry->addr.id > MAX_ADDR_ID). We should also remove the obsolete parentheses in the first if branch. Use U8_MAX for MAX_ADDR_ID and add a comment to show the link to mptcp_addr_info.id as suggested by Mr. Matthieu Baerts. Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jean Sacren <sakiwit@gmail.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
