- 18 Dec, 2015 40 commits
-
-
Jan Engelhardt authored
commit d94e5a61 upstream. target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by:
Jan Engelhardt <jengelh@netitwork.de> Tested-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Nicholas Bellinger authored
commit 057085e5 upstream. This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Nicholas Bellinger authored
commit ca82c2bd upstream. This patch addresses a case where iscsi_target_do_tx_login_io() fails sending the last login response PDU, after the RX/TX threads have already been started. The case centers around iscsi_target_rx_thread() not invoking allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs from the failure path, resulting in RX thread hanging indefinately on iscsi_conn->rx_login_comp. Note this bug is a regression introduced by: commit e5419865 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 22 23:14:19 2015 -0700 iscsi-target: Fix iscsit_start_kthreads failure OOPs To address this bug, complete ->rx_login_complete for good measure in the failure path, and immediately return from RX thread context if connection state did not actually reach full feature phase (TARG_CONN_STATE_LOGGED_IN). Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Boris Ostrovsky authored
commit 9c17d965 upstream. Doing so will cause the grant to be unmapped and then, during fault handling, the fault to be mistakenly treated as NUMA hint fault. In addition, even if those maps could partcipate in NUMA balancing, it wouldn't provide any benefit since we are unable to determine physical page's node (even if/when VNUMA is implemented). Marking grant maps' VMAs as VM_IO will exclude them from being part of NUMA balancing. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Jeff Layton authored
commit c812012f upstream. If we pass in an empty nfs_fattr struct to nfs_update_inode, it will (correctly) not update any of the attributes, but it then clears the NFS_INO_INVALID_ATTR flag, which indicates that the attributes are up to date. Don't clear the flag if the fattr struct has no valid attrs to apply. Reviewed-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Alex Deucher authored
commit 9c565e33 upstream. "Could not force DPM to low", etc. is usually harmless and just confuses users. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Takashi Iwai authored
commit 0c25ad80 upstream. Gigabyte Z710X mobo with ALC1150 codec gets significant noises from the analog loopback routes even if their inputs are all muted. Simply kill the aamix for fixing it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108301Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alex Deucher authored
commit 4e7697ed upstream. On some cards it takes a relatively long time for the change to take place. Make a timeout non-fatal. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76130Signed-off-by:
-
Marc Zyngier authored
commit c0f09634 upstream. When running a 32bit guest under a 64bit hypervisor, the ARMv8 architecture defines a mapping of the 32bit registers in the 64bit space. This includes banked registers that are being demultiplexed over the 64bit ones. On exceptions caused by an operation involving a 32bit register, the HW exposes the register number in the ESR_EL2 register. It was so far understood that SW had to distinguish between AArch32 and AArch64 accesses (based on the current AArch32 mode and register number). It turns out that I misinterpreted the ARM ARM, and the clue is in D1.20.1: "For some exceptions, the exception syndrome given in the ESR_ELx identifies one or more register numbers from the issued instruction that generated the exception. Where the exception is taken from an Exception level using AArch32 these register numbers give the AArch64 view of the register." Which means that the HW is already giving us the translated version, and that we shouldn't try to interpret it at all (for example, doing an MMIO operation from the IRQ mode using the LR register leads to very unexpected behaviours). The fix is thus not to perform a call to vcpu_reg32() at all from vcpu_reg(), and use whatever register number is supplied directly. The only case we need to find out about the mapping is when we actively generate a register access, which only occurs when injecting a fault in a guest. Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Hui Wang authored
commit 8c69729b upstream. We have a machine Dell XPS 13 with the codec alc256, after resume back from S3, the headphone has noise when play sound. Through comparing with the coeff vaule before and after S3, we found restoring a coeff register will help remove noise. BugLink: https://bugs.launchpad.net/bugs/1519168 Cc: Kailang Yang <kailang@realtek.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Benjamin Coddington authored
commit c68a027c upstream. If clp->cl_cb_ident is zero, then nfs_cb_idr_remove_locked() skips removing it when the nfs_client is freed. A decoding or server bug can then find and try to put that first nfs_client which would lead to a crash. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: d6870312 ("nfs4client: convert to idr_alloc()") Signed-off-by:
-
Jan Kara authored
commit c2489e07 upstream. The following test program from Dmitry can cause softlockups or RCU stalls as it copies 1GB from tmpfs into eventfd and we don't have any scheduling point at that path in sendfile(2) implementation: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); Add cond_resched() into __splice_from_pipe() to fix the problem. CC: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit c725bfce upstream. Commit 296291cd (mm: make sendfile(2) killable) fixed an issue where sendfile(2) was doing a lot of tiny writes into a filesystem and thus was unkillable for a long time. However sendfile(2) can be (mis)used to issue lots of writes into arbitrary file descriptor such as evenfd or similar special file descriptors which never hit the standard filesystem write path and thus are still unkillable. E.g. the following example from Dmitry burns CPU for ~16s on my test system without possibility to be killed: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); There are actually quite a few tests for pending signals in sendfile code however we data to write is always available none of them seems to trigger. So fix the problem by adding a test for pending signal into splice_from_pipe_next() also before the loop waiting for pipe buffers to be available. This should fix all the lockup issues with sendfile of the do-ton-of-tiny-writes nature. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Al Viro authored
commit 0ebf7f10 upstream. The thing got broken back in 2002 - sysvfs does *not* have inline symlinks; even short ones have bodies stored in the first block of file. sysv_symlink() handles that correctly; unfortunately, attempting to look an existing symlink up will end up confusing them for inline symlinks, and interpret the block number containing the body as the body itself. Nobody has noticed until now, which says something about the level of testing sysvfs gets ;-/ Signed-off-by:
-
Vineet Gupta authored
commit 2e22502c upstream. Fixes STAR 9000953410: "perf callgraph profiling causing RCU stalls" | perf record -g -c 15000 -e cycles /sbin/hackbench | | INFO: rcu_preempt self-detected stall on CPU | 1: (1 GPs behind) idle=609/140000000000002/0 softirq=2914/2915 fqs=603 | Task dump for CPU 1: in-kernel dwarf unwinder has a fast binary lookup and a fallback linear search (which iterates thru each of ~11K entries) thus takes 2 orders of magnitude longer (~3 million cycles vs. 2000). Routines written in hand assembler lack dwarf info (as we don't support assembler CFI pseudo-ops yet) fail the unwinder binary lookup, hit linear search, failing nevertheless in the end. However the linear search is pointless as binary lookup tables are created from it in first place. It is impossible to have binary lookup fail while succeed the linear search. It is pure waste of cycles thus removed by this patch. This manifested as RCU stalls / NMI watchdog splat when running hackbench under perf with callgraph profiling. The triggering condition was perf counter overflowing in routine lacking dwarf info (like memset) leading to patheic 3 million cycle unwinder slow path and by the time it returned new interrupts were already pending (Timer, IPI) and taken rightaway. The original memset didn't make forward progress, system kept accruing more interrupts and more unwinder delayes in a vicious feedback loop, ultimately triggering the NMI diagnostic. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Michael Neuling authored
commit 7f821fc9 upstream. Currently we can hit a scenario where we'll tm_reclaim() twice. This results in a TM bad thing exception because the second reclaim occurs when not in suspend mode. The scenario in which this can happen is the following. We attempt to deliver a signal to userspace. To do this we need obtain the stack pointer to write the signal context. To get this stack pointer we must tm_reclaim() in case we need to use the checkpointed stack pointer (see get_tm_stackpointer()). Normally we'd then return directly to userspace to deliver the signal without going through __switch_to(). Unfortunatley, if at this point we get an error (such as a bad userspace stack pointer), we need to exit the process. The exit will result in a __switch_to(). __switch_to() will attempt to save the process state which results in another tm_reclaim(). This tm_reclaim() now causes a TM Bad Thing exception as this state has already been saved and the processor is no longer in TM suspend mode. Whee! This patch checks the state of the MSR to ensure we are TM suspended before we attempt the tm_reclaim(). If we've already saved the state away, we should no longer be in TM suspend mode. This has the additional advantage of checking for a potential TM Bad Thing exception. Found using syscall fuzzer. Fixes: fb09692e ("powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes") Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit d2b9d2a5 upstream. Currently we allow both the MSR T and S bits to be set by userspace on a signal return. Unfortunately this is a reserved configuration and will cause a TM Bad Thing exception if attempted (via rfid). This patch checks for this case in both the 32 and 64 bit signals code. If both T and S are set, we mark the context as invalid. Found using a syscall fuzzer. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Signed-off-by:
-
Takashi Iwai authored
commit 196543d5 upstream. It turned out that many HP laptops suffer from the same problem as fixed in commit [c932b98c: ALSA: hda - Apply pin fixup for HP ProBook 6550b]. But, it's tiresome to list up all such PCI SSIDs, as there are really lots of HP machines. Instead, we do a bit more clever, try to check the supposedly dock and built-in headphone pins, and apply the fixup when both seem valid. This rule can be applied generically to all models using the same quirk, so we'll fix all in a shot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107491Signed-off-by:
-
Kees Cook authored
commit 02e2a5bf upstream. If md->signature == MAC_DRIVER_MAGIC and md->block_size == 1023, a single 512 byte sector would be read (secsize / 512). However the partition structure would be located past the end of the buffer (secsize % 512). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Takashi Iwai authored
commit b9c2fa52 upstream. For making the speakers on Acer Aspire One Cloudbook 14 to work, we need the as same quirk as for another Chromebook. This patch adds the corresponding fixup entry. Reported-by:
Patrick <epictetus@gmail.com> Signed-off-by:
-
James Hogan authored
commit 585bb8f9 upstream. If either of the memory allocations in kvm_arch_vcpu_create() fail, the vcpu which has been allocated and kvm_vcpu_init'd doesn't get uninit'd in the error handling path. Add a call to kvm_vcpu_uninit() to fix this. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [ luis: backported to 3.16: - file rename: mips.c -> kvm_mips.c ] Signed-off-by:
-
James Hogan authored
commit c5c2a3b9 upstream. The immediate field of the CACHE instruction is signed, so ensure that it gets sign extended by casting it to an int16_t rather than just masking the low 16 bits. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
-
James Hogan authored
commit 002374f3 upstream. ASID restoration on guest resume should determine the guest execution mode based on the guest Status register rather than bit 30 of the guest PC. Fix the two places in locore.S that do this, loading the guest status from the cop0 area. Note, this assembly is specific to the trap & emulate implementation of KVM, so it doesn't need to check the supervisor bit as that mode is not implemented in the guest. Fixes: b680f70f ("KVM/MIPS32: Entry point for trampolining to...") Signed-off-by:
-
Junichi Nomura authored
commit 5bbbfdf6 upstream. dm-mpath retries ioctl, when no path is readily available and the device is configured to queue I/O in such a case. If you want to stop the retry before multipathd decides to turn off queueing mode, you could send signal for the process to exit from the loop. However the check of fatal signal has not carried along when commit 6c182cd8 ("dm mpath: fix ioctl deadlock when no paths") moved the loop from dm-mpath to dm core. As a result, we can't terminate such a process in the retry loop. Easy reproducer of the situation is: # dmsetup create mp --table '0 1024 multipath 0 0 0 0' # dmsetup message mp 0 'queue_if_no_path' # sg_inq /dev/mapper/mp then you should be able to terminate sg_inq by pressing Ctrl+C. Fixes: 6c182cd8 ("dm mpath: fix ioctl deadlock when no paths") Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Mike Snitzer authored
commit 172c2386 upstream. A thin-pool that is in out-of-data-space (OODS) mode may transition back to write mode -- without the admin adding more space to the thin-pool -- if/when blocks are released (either by deleting thin devices or discarding provisioned blocks). But as part of the thin-pool's earlier transition to out-of-data-space mode the thin-pool may have set the 'error_if_no_space' flag to true if the no_space_timeout expires without more space having been made available. That implementation detail, of changing the pool's error_if_no_space setting, needs to be reset back to the default that the user specified when the thin-pool's table was loaded. Otherwise we'll drop the user requested behaviour on the floor when this out-of-data-space to write mode transition occurs. Reported-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Fixes: 2c43fd26 ("dm thin: fix missing out-of-data-space to write mode transition if blocks are released") [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Clemens Ladisch authored
commit a91e627e upstream. One of the many faults of the QinHeng CH345 USB MIDI interface chip is that it does not handle received SysEx messages correctly -- every second event packet has a wrong code index number, which is the one from the last seen message, instead of 4. For example, the two messages "FE F0 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E F7" result in the following event packets: correct: CH345: 0F FE 00 00 0F FE 00 00 04 F0 01 02 04 F0 01 02 04 03 04 05 0F 03 04 05 04 06 07 08 04 06 07 08 04 09 0A 0B 0F 09 0A 0B 04 0C 0D 0E 04 0C 0D 0E 05 F7 00 00 05 F7 00 00 A class-compliant driver must interpret an event packet with CIN 15 as having a single data byte, so the other two bytes would be ignored. The message received by the host would then be missing two bytes out of six; in this example, "F0 01 02 03 06 07 08 09 0C 0D 0E F7". These corrupted SysEx event packages contain only data bytes, while the CH345 uses event packets with a correct CIN value only for messages with a status byte, so it is possible to distinguish between these two cases by checking for the presence of this status byte. (Other bugs in the CH345's input handling, such as the corruption resulting from running status, cannot be worked around.) Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Clemens Ladisch authored
commit 1ca8b201 upstream. The CH345 USB MIDI chip has two output ports. However, they are multiplexed through one pin, and the number of ports cannot be reduced even for hardware that implements only one connector, so for those devices, data sent to either port ends up on the same hardware output. This becomes a problem when both ports are used at the same time, as longer MIDI commands (such as SysEx messages) are likely to be interrupted by messages from the other port, and thus to get lost. It would not be possible for the driver to detect how many ports the device actually has, except that in practice, _all_ devices built with the CH345 have only one port. So we can just ignore the device's descriptors, and hardcode one output port. Signed-off-by:
-
Clemens Ladisch authored
commit 98d362be upstream. Signed-off-by:
-
Eric Sandeen authored
commit 9de67c3b upstream. Today, if we perform an xfs_growfs which adds allocation groups, mp->m_maxagi is not properly updated when the growfs is complete. Therefore inodes will continue to be allocated only in the AGs which existed prior to the growfs, and the new space won't be utilized. This is because of this path in xfs_growfs_data_private(): xfs_growfs_data_private xfs_initialize_perag(mp, nagcount, &nagimax); if (mp->m_flags & XFS_MOUNT_32BITINODES) index = xfs_set_inode32(mp); else index = xfs_set_inode64(mp); if (maxagi) *maxagi = index; where xfs_set_inode* iterates over the (old) agcount in mp->m_sb.sb_agblocks, which has not yet been updated in the growfs path. So "index" will be returned based on the old agcount, not the new one, and new AGs are not available for inode allocation. Fix this by explicitly passing the proper AG count (which xfs_initialize_perag() already has) down another level, so that xfs_set_inode* can make the proper decision about acceptable AGs for inode allocation in the potentially newly-added AGs. This has been broken since 3.7, when these two xfs_set_inode* functions were added in commit 2d2194f6. Prior to that, we looped over "agcount" not sb_agblocks in these calculations. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Cc: Ben Hutchings <ben@decadent.org.uk> Acked-by:
-
Eric Dumazet authored
commit 602dd62d upstream. Dmitry Vyukov reported a memory leak using IPV6 SCTP sockets. We need to call inet6_destroy_sock() to properly release inet6 specific fields. Reported-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 6adc5fd6 upstream. Proxy entries could have null pointer to net-device. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Fixes: 84920c14 ("net: Allow ipv6 proxies and arp proxies be shown with iproute2") Signed-off-by:
-
Eric Dumazet authored
commit 45f6fad8 upstream. This patch addresses multiple problems : UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions while socket is not locked : Other threads can change np->opt concurrently. Dmitry posted a syzkaller (http://github.com/google/syzkaller) program desmonstrating use-after-free. Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock() and dccp_v6_request_recv_sock() also need to use RCU protection to dereference np->opt once (before calling ipv6_dup_options()) This patch adds full RCU protection to np->opt Reported-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Michal Kubeček authored
commit 264640fc upstream. If a fragmented multicast packet is received on an ethernet device which has an active macvlan on top of it, each fragment is duplicated and received both on the underlying device and the macvlan. If some fragments for macvlan are processed before the whole packet for the underlying device is reassembled, the "overlapping fragments" test in ip6_frag_queue() discards the whole fragment queue. To resolve this, add device ifindex to the search key and require it to match reassembling multicast packets and packets to link-local addresses. Note: similar patch has been already submitted by Yoshifuji Hideaki in http://patchwork.ozlabs.org/patch/220979/ but got lost and forgotten for some reason. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Aaro Koskinen authored
commit 3c25a860 upstream. Commit fcb26ec5 ("broadcom: move all PHY_ID's to header") updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0 with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting the original). Fix that. Fixes: fcb26ec5 ("broadcom: move all PHY_ID's to header") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 4c698046 upstream. Similar to ipv4, when destroying an mrt table the static mfc entries and the static devices are kept, which leads to devices that can never be destroyed (because of refcnt taken) and leaked memory. Make sure that everything is cleaned up on netns destruction. Fixes: 8229efda ("netns: ip6mr: enable namespace support in ipv6 multicast forwarding code") CC: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
-
Nikolay Aleksandrov authored
commit 0e615e96 upstream. When destroying an mrt table the static mfc entries and the static devices are kept, which leads to devices that can never be destroyed (because of refcnt taken) and leaked memory, for example: unreferenced object 0xffff880034c144c0 (size 192): comm "mfc-broken", pid 4777, jiffies 4320349055 (age 46001.964s) hex dump (first 32 bytes): 98 53 f0 34 00 88 ff ff 98 53 f0 34 00 88 ff ff .S.4.....S.4.... ef 0a 0a 14 01 02 03 04 00 00 00 00 01 00 00 00 ................ backtrace: [<ffffffff815c1b9e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811ea6e0>] kmem_cache_alloc+0x190/0x300 [<ffffffff815931cb>] ip_mroute_setsockopt+0x5cb/0x910 [<ffffffff8153d575>] do_ip_setsockopt.isra.11+0x105/0xff0 [<ffffffff8153e490>] ip_setsockopt+0x30/0xa0 [<ffffffff81564e13>] raw_setsockopt+0x33/0x90 [<ffffffff814d1e14>] sock_common_setsockopt+0x14/0x20 [<ffffffff814d0b51>] SyS_setsockopt+0x71/0xc0 [<ffffffff815cdbf6>] entry_SYSCALL_64_fastpath+0x16/0x7a [<ffffffffffffffff>] 0xffffffffffffffff Make sure that everything is cleaned on netns destruction. Signed-off-by:
-
Daniel Borkmann authored
commit 6900317f upstream. David and HacKurx reported a following/similar size overflow triggered in a grsecurity kernel, thanks to PaX's gcc size overflow plugin: (Already fixed in later grsecurity versions by Brad and PaX Team.) [ 1002.296137] PAX: size overflow detected in function scm_detach_fds net/core/scm.c:314 cicus.202_127 min, count: 4, decl: msg_controllen; num: 0; context: msghdr; [ 1002.296145] CPU: 0 PID: 3685 Comm: scm_rights_recv Not tainted 4.2.3-grsec+ #7 [ 1002.296149] Hardware name: Apple Inc. MacBookAir5,1/Mac-66F35F19FE2A0D05, [...] [ 1002.296153] ffffffff81c27366 0000000000000000 ffffffff81c27375 ffffc90007843aa8 [ 1002.296162] ffffffff818129ba 0000000000000000 ffffffff81c27366 ffffc90007843ad8 [ 1002.296169] ffffffff8121f838 fffffffffffffffc fffffffffffffffc ffffc90007843e60 [ 1002.296176] Call Trace: [ 1002.296190] [<ffffffff818129ba>] dump_stack+0x45/0x57 [ 1002.296200] [<ffffffff8121f838>] report_size_overflow+0x38/0x60 [ 1002.296209] [<ffffffff816a979e>] scm_detach_fds+0x2ce/0x300 [ 1002.296220] [<ffffffff81791899>] unix_stream_read_generic+0x609/0x930 [ 1002.296228] [<ffffffff81791c9f>] unix_stream_recvmsg+0x4f/0x60 [ 1002.296236] [<ffffffff8178dc00>] ? unix_set_peek_off+0x50/0x50 [ 1002.296243] [<ffffffff8168fac7>] sock_recvmsg+0x47/0x60 [ 1002.296248] [<ffffffff81691522>] ___sys_recvmsg+0xe2/0x1e0 [ 1002.296257] [<ffffffff81693496>] __sys_recvmsg+0x46/0x80 [ 1002.296263] [<ffffffff816934fc>] SyS_recvmsg+0x2c/0x40 [ 1002.296271] [<ffffffff8181a3ab>] entry_SYSCALL_64_fastpath+0x12/0x85 Further investigation showed that this can happen when an *odd* number of fds are being passed over AF_UNIX sockets. In these cases CMSG_LEN(i * sizeof(int)) and CMSG_SPACE(i * sizeof(int)), where i is the number of successfully passed fds, differ by 4 bytes due to the extra CMSG_ALIGN() padding in CMSG_SPACE() to an 8 byte boundary on 64 bit. The padding is used to align subsequent cmsg headers in the control buffer. When the control buffer passed in from the receiver side *lacks* these 4 bytes (e.g. due to buggy/wrong API usage), then msg->msg_controllen will overflow in scm_detach_fds(): int cmlen = CMSG_LEN(i * sizeof(int)); <--- cmlen w/o tail-padding err = put_user(SOL_SOCKET, &cm->cmsg_level); if (!err) err = put_user(SCM_RIGHTS, &cm->cmsg_type); if (!err) err = put_user(cmlen, &cm->cmsg_len); if (!err) { cmlen = CMSG_SPACE(i * sizeof(int)); <--- cmlen w/ 4 byte extra tail-padding msg->msg_control += cmlen; msg->msg_controllen -= cmlen; <--- iff no tail-padding space here ... } ... wrap-around F.e. it will wrap to a length of 18446744073709551612 bytes in case the receiver passed in msg->msg_controllen of 20 bytes, and the sender properly transferred 1 fd to the receiver, so that its CMSG_LEN results in 20 bytes and CMSG_SPACE in 24 bytes. In case of MSG_CMSG_COMPAT (scm_detach_fds_compat()), I haven't seen an issue in my tests as alignment seems always on 4 byte boundary. Same should be in case of native 32 bit, where we end up with 4 byte boundaries as well. In practice, passing msg->msg_controllen of 20 to recvmsg() while receiving a single fd would mean that on successful return, msg->msg_controllen is being set by the kernel to 24 bytes instead, thus more than the input buffer advertised. It could f.e. become an issue if such application later on zeroes or copies the control buffer based on the returned msg->msg_controllen elsewhere. Maximum number of fds we can send is a hard upper limit SCM_MAX_FD (253). Going over the code, it seems like msg->msg_controllen is not being read after scm_detach_fds() in scm_recv() anymore by the kernel, good! Relevant recvmsg() handler are unix_dgram_recvmsg() (unix_seqpacket_recvmsg()) and unix_stream_recvmsg(). Both return back to their recvmsg() caller, and ___sys_recvmsg() places the updated length, that is, new msg_control - old msg_control pointer into msg->msg_controllen (hence the 24 bytes seen in the example). Long time ago, Wei Yongjun fixed something related in commit 1ac70e7a ("[NET]: Fix function put_cmsg() which may cause usr application memory overflow"). RFC3542, section 20.2. says: The fields shown as "XX" are possible padding, between the cmsghdr structure and the data, and between the data and the next cmsghdr structure, if required by the implementation. While sending an application may or may not include padding at the end of last ancillary data in msg_controllen and implementations must accept both as valid. On receiving a portable application must provide space for padding at the end of the last ancillary data as implementations may copy out the padding at the end of the control message buffer and include it in the received msg_controllen. When recvmsg() is called if msg_controllen is too small for all the ancillary data items including any trailing padding after the last item an implementation may set MSG_CTRUNC. Since we didn't place MSG_CTRUNC for already quite a long time, just do the same as in 1ac70e7a to avoid an overflow. Btw, even man-page author got this wrong :/ See db939c9b26e9 ("cmsg.3: Fix error in SCM_RIGHTS code sample"). Some people must have copied this (?), thus it got triggered in the wild (reported several times during boot by David and HacKurx). No Fixes tag this time as pre 2002 (that is, pre history tree). Reported-by:
David Sterba <dave@jikos.cz> Reported-by:
HacKurx <hackurx@gmail.com> Cc: PaX Team <pageexec@freemail.hu> Cc: Emese Revfy <re.emese@gmail.com> Cc: Brad Spengler <spender@grsecurity.net> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by:
-
Eric Dumazet authored
commit 142a2e7e upstream. Dmitry provided a syzkaller (http://github.com/google/syzkaller) generated program that triggers the WARNING at net/ipv4/tcp.c:1729 in tcp_recvmsg() : WARN_ON(tp->copied_seq != tp->rcv_nxt && !(flags & (MSG_PEEK | MSG_TRUNC))); His program is specifically attempting a Cross SYN TCP exchange, that we support (for the pleasure of hackers ?), but it looks we lack proper tcp->copied_seq initialization. Thanks again Dmitry for your report and testings. Signed-off-by:
-
Eric Dumazet authored
commit 1b8e6a01 upstream. When a passive TCP is created, we eventually call tcp_md5_do_add() with sk pointing to the child. It is not owner by the user yet (we will add this socket into listener accept queue a bit later anyway) But we do own the spinlock, so amend the lockdep annotation to avoid following splat : [ 8451.090932] net/ipv4/tcp_ipv4.c:923 suspicious rcu_dereference_protected() usage! [ 8451.090932] [ 8451.090932] other info that might help us debug this: [ 8451.090932] [ 8451.090934] [ 8451.090934] rcu_scheduler_active = 1, debug_locks = 1 [ 8451.090936] 3 locks held by socket_sockopt_/214795: [ 8451.090936] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff855c6ac1>] __netif_receive_skb_core+0x151/0xe90 [ 8451.090947] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff85618143>] ip_local_deliver_finish+0x43/0x2b0 [ 8451.090952] #2: (slock-AF_INET){+.-...}, at: [<ffffffff855acda5>] sk_clone_lock+0x1c5/0x500 [ 8451.090958] [ 8451.090958] stack backtrace: [ 8451.090960] CPU: 7 PID: 214795 Comm: socket_sockopt_ [ 8451.091215] Call Trace: [ 8451.091216] <IRQ> [<ffffffff856fb29c>] dump_stack+0x55/0x76 [ 8451.091229] [<ffffffff85123b5b>] lockdep_rcu_suspicious+0xeb/0x110 [ 8451.091235] [<ffffffff8564544f>] tcp_md5_do_add+0x1bf/0x1e0 [ 8451.091239] [<ffffffff85645751>] tcp_v4_syn_recv_sock+0x1f1/0x4c0 [ 8451.091242] [<ffffffff85642b27>] ? tcp_v4_md5_hash_skb+0x167/0x190 [ 8451.091246] [<ffffffff85647c78>] tcp_check_req+0x3c8/0x500 [ 8451.091249] [<ffffffff856451ae>] ? tcp_v4_inbound_md5_hash+0x11e/0x190 [ 8451.091253] [<ffffffff85647170>] tcp_v4_rcv+0x3c0/0x9f0 [ 8451.091256] [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0 [ 8451.091260] [<ffffffff856181b6>] ip_local_deliver_finish+0xb6/0x2b0 [ 8451.091263] [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0 [ 8451.091267] [<ffffffff85618d38>] ip_local_deliver+0x48/0x80 [ 8451.091270] [<ffffffff85618510>] ip_rcv_finish+0x160/0x700 [ 8451.091273] [<ffffffff8561900e>] ip_rcv+0x29e/0x3d0 [ 8451.091277] [<ffffffff855c74b7>] __netif_receive_skb_core+0xb47/0xe90 Fixes: a8afca03 ("tcp: md5: protects md5sig_info with RCU") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Bjørn Mork authored
commit 68242a5a upstream. Thomas reports " 4gsystems sells two total different LTE-surfsticks under the same name. .. The newer version of XS Stick W100 is from "omega" .. Under windows the driver switches to the same ID, and uses MI03\6 for network and MI01\6 for modem. .. echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b01 Rev=02.32 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Now all important things are there: wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at) There is also ttyUSB0, but it is not usable, at least not for at. The device works well with qmi and ModemManager-NetworkManager. " Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
