- 22 Jan, 2017 1 commit
-
-
Zhou Chengming authored
I feel that the example given in the document to show the possibility of task starvation of configurable period is wrong. The example says group A and B both have 50% bandwidth, and a while (1) loop in A will run for the full period of B and can starve B's tasks. So I think the runtime of group A should be 50000us, then the period and runtime of group B should be 50000us and 25000us. Signed-off-by:
Zhou Chengming <zhouchengming1@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: corbet@lwn.net Cc: iamyooon@gmail.com Cc: linux-doc@vger.kernel.org Cc: lizefan@huawei.com Link: http://lkml.kernel.org/r/1485069755-44287-1-git-send-email-zhouchengming1@huawei.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 20 Jan, 2017 1 commit
-
-
Peter Zijlstra authored
Mike reported that he could trigger the WARN_ON_ONCE() in set_sched_clock_stable() using hotplug. This exposed a fundamental problem with the interface, we should never mark the TSC stable if we ever find it to be unstable. Therefore set_sched_clock_stable() is a broken interface. The reason it existed is that not having it is a pain, it means all relevant architecture code needs to call clear_sched_clock_stable() where appropriate. Of the three architectures that select HAVE_UNSTABLE_SCHED_CLOCK ia64 and parisc are trivial in that they never called set_sched_clock_stable(), so add an unconditional call to clear_sched_clock_stable() to them. For x86 the story is a lot more involved, and what this patch tries to do is ensure we preserve the status quo. So even is Cyrix or Transmeta have usable TSC they never called set_sched_clock_stable() so they now get an explicit mark unstable. Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 9881b024 ("sched/clock: Delay switching sched_clock to stable") Link: http://lkml.kernel.org/r/20170119133633.GB6536@twins.programming.kicks-ass.netSigned-off-by:
-
- 19 Jan, 2017 1 commit
-
-
Tim Chen authored
Scheduling to the max performance core is enabled by default for Turbo Boost Maxt Technology 3.0 capable platforms. Remove the useless sysctl_sched_itmt_enabled check to update sched topology for adding the prioritized core scheduling flag. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@suse.de Cc: jolsa@redhat.com Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/1484778629-4404-1-git-send-email-tim.c.chen@linux.intel.comSigned-off-by:
-
- 14 Jan, 2017 36 commits
-
-
Ingo Molnar authored
Mike noticed this bogosity: > > +# define mutex_lock_nest_io(lock, nest_lock) mutex_io(lock) > ^^^^^^^^^^^^^^ typo This new locking API is not used yet, so this didn't trigger in testing. Fix it. Reported-by:
-
Tejun Heo authored
When an ext4 fs is bogged down by a lot of metadata IOs (in the reported case, it was deletion of millions of files, but any massive amount of journal writes would do), after the journal is filled up, tasks which try to access the filesystem and aren't currently performing the journal writes end up waiting in __jbd2_log_wait_for_space() for journal->j_checkpoint_mutex. Because those mutex sleeps aren't marked as iowait, this condition can lead to misleadingly low iowait and /proc/stat:procs_blocked. While iowait propagation is far from strict, this condition can be triggered fairly easily and annotating these sleeps correctly helps initial diagnosis quite a bit. Use the new mutex_lock_io() for journal->j_checkpoint_mutex so that these sleeps are properly marked as iowait. Reported-by:
Mingbo Wan <mingbo@fb.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
We sometimes end up propagating IO blocking through mutexes; however, because there currently is no way of annotating mutex sleeps as iowait, there are cases where iowait and /proc/stat:procs_blocked report misleading numbers obscuring the actual state of the system. This patch adds mutex_lock_io() so that mutex sleeps can be marked as iowait in those cases. Signed-off-by:
-
Tejun Heo authored
Now that IO schedule accounting is done inside __schedule(), io_schedule() can be split into three steps - prep, schedule, and finish - where the schedule part doesn't need any special annotation. This allows marking a sleep as iowait by simply wrapping an existing blocking function with io_schedule_prepare() and io_schedule_finish(). Because task_struct->in_iowait is single bit, the caller of io_schedule_prepare() needs to record and the pass its state to io_schedule_finish() to be safe regarding nesting. While this isn't the prettiest, these functions are mostly gonna be used by core functions and we don't want to use more space for ->in_iowait. While at it, as it's simple to do now, reimplement io_schedule() without unnecessarily going through io_schedule_timeout(). Signed-off-by:
-
Tejun Heo authored
For an interface to support blocking for IOs, it must call io_schedule() instead of schedule(). This makes it tedious to add IO blocking to existing interfaces as the switching between schedule() and io_schedule() is often buried deep. As we already have a way to mark the task as IO scheduling, this can be made easier by separating out io_schedule() into multiple steps so that IO schedule preparation can be performed before invoking a blocking interface and the actual accounting happens inside the scheduler. io_schedule_timeout() does the following three things prior to calling schedule_timeout(). 1. Mark the task as scheduling for IO. 2. Flush out plugged IOs. 3. Account the IO scheduling. done close to the actual scheduling. This patch moves #3 into the scheduler so that later patches can separate out preparation and finish steps from io_schedule(). Patch-originally-by:
-
Dietmar Eggemann authored
Signed-off-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
-
Vincent Guittot authored
The update of the share of a cfs_rq is done when its load_avg is updated but before the group_entity's load_avg has been updated for the past time slot. This generates wrong load_avg accounting which can be significant when small tasks are involved in the scheduling. Let take the example of a task a that is dequeued of its task group A: root (cfs_rq) \ (se) A (cfs_rq) \ (se) a Task "a" was the only task in task group A which becomes idle when a is dequeued. We have the sequence: - dequeue_entity a->se - update_load_avg(a->se) - dequeue_entity_load_avg(A->cfs_rq, a->se) - update_cfs_shares(A->cfs_rq) A->cfs_rq->load.weight == 0 A->se->load.weight is updated with the new share (0 in this case) - dequeue_entity A->se - update_load_avg(A->se) but its weight is now null so the last time slot (up to a tick) will be accounted with a weight of 0 instead of its real weight during the time slot. The last time slot will be accounted as an idle one whereas it was a running one. If the running time of task a is short enough that no tick happens when it runs, all running time of group entity A->se will be accounted as idle time. Instead, we should update the share of a cfs_rq (in fact the weight of its group entity) only after having updated the load_avg of the group_entity. update_cfs_shares() now takes the sched_entity as a parameter instead of the cfs_rq, and the weight of the group_entity is updated only once its load_avg has been synced with current time. Signed-off-by:Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
-
Peter Zijlstra authored
Documentation/scheduler/completion.txt says this about complete_all(): "calls complete_all() to signal all current and future waiters." Which doesn't strictly match the current semantics. Currently complete_all() is equivalent to UINT_MAX/2 complete() invocations, which is distinctly less than 'all current and future waiters' (enumerable vs innumerable), although it has worked in practice. However, Dmitry had a weird case where it might matter, so change completions to use saturation semantics for complete()/complete_all(). Once done hits UINT_MAX (and complete_all() sets it there) it will never again be decremented. Requested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Tommaso Cucinotta authored
This patch allows for reading the current (leftover) runtime and absolute deadline of a SCHED_DEADLINE task through /proc/*/sched (entries dl.runtime and dl.deadline), while debugging/testing. Signed-off-by:
Tommaso Cucinotta <tommaso.cucinotta@sssup.it> Signed-off-by:
Juri Lelli <juri.lelli@arm.com> Reviewed-by:
Luca Abeni <luca.abeni@unitn.it> Acked-by:
Daniel Bistrot de Oliveira <danielbristot@gmail.com> Cc: Juri Lelli <juri.lelli@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1477473437-10346-2-git-send-email-tommaso.cucinotta@sssup.itSigned-off-by:
-
Peter Zijlstra authored
When switching between the unstable and stable variants it is currently possible that clock discontinuities occur. And while these will mostly be 'small', attempt to do better. As observed on my IVB-EP, the sched_clock() is ~1.5s ahead of the ktime_get_ns() based timeline at the point of switchover (sched_clock_init_late()) after SMP bringup. Equally, when the TSC is later found to be unstable -- typically because SMM tries to hide its SMI latencies by mucking with the TSC -- we want to avoid large jumps. Since the clocksource watchdog reports the issue after the fact we cannot exactly fix up time, but since SMI latencies are typically small (~10ns range), the discontinuity is mainly due to drift between sched_clock() and ktime_get_ns() (which on my desktop is ~79s over 24days). I dislike this patch because it adds overhead to the good case in favour of dealing with badness. But given the widespread failure of TSC stability this is worth it. Note that in case the TSC makes drastic jumps after SMP bringup we're still hosed. There's just not much we can do in that case without stupid overhead. If we were to somehow expose tsc_clocksource_reliable (which is hard because this code is also used on ia64 and parisc) we could avoid some of the newly introduced overhead. Signed-off-by:
-
Peter Zijlstra authored
Currently we switch to the stable sched_clock if we guess the TSC is usable, and then switch back to the unstable path if it turns out TSC isn't stable during SMP bringup after all. Delay switching to the stable path until after SMP bringup is complete. This way we'll avoid switching during the time we detect the worst of the TSC offences. Signed-off-by:
-
Peter Zijlstra authored
sched_clock was still using the deprecated static_key interface. Signed-off-by:
-
Thomas Gleixner authored
PeterZ reported that we'd fail to mark the TSC unstable when the clocksource watchdog finds it unsuitable. Allow a clocksource to run a custom action when its being marked unstable and hook up the TSC unstable code. Reported-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Matt Fleming authored
There's no diagnostic checks for figuring out when we've accidentally missed update_rq_clock() calls. Let's add some by piggybacking on the rq_*pin_lock() wrappers. The idea behind the diagnostic checks is that upon pining rq lock the rq clock should be updated, via update_rq_clock(), before anybody reads the clock with rq_clock() or rq_clock_task(). The exception to this rule is when updates have explicitly been disabled with the rq_clock_skip_update() optimisation. There are some functions that only unpin the rq lock in order to grab some other lock and avoid deadlock. In that case we don't need to update the clock again and the previous diagnostic state can be carried over in rq_repin_lock() by saving the state in the rq_flags context. Since this patch adds a new clock update flag and some already exist in rq::clock_skip_update, that field has now been renamed. An attempt has been made to keep the flag manipulation code small and fast since it's used in the heart of the __schedule() fast path. For the !CONFIG_SCHED_DEBUG case the only object code change (other than addresses) is the following change to reset RQCF_ACT_SKIP inside of __schedule(), - c7 83 38 09 00 00 00 movl $0x0,0x938(%rbx) - 00 00 00 + 83 a3 38 09 00 00 fc andl $0xfffffffc,0x938(%rbx) Suggested-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Peter Zijlstra authored
Address this rq-clock update bug: WARNING: CPU: 30 PID: 195 at ../kernel/sched/sched.h:797 set_next_entity() rq->clock_update_flags < RQCF_ACT_SKIP Call Trace: dump_stack() __warn() warn_slowpath_fmt() set_next_entity() ? _raw_spin_lock() set_curr_task_fair() set_user_nice.part.85() set_user_nice() create_worker() worker_thread() kthread() ret_from_fork() Signed-off-by: -
Peter Zijlstra authored
Add the update_rq_clock() call at the top of the callstack instead of at the bottom where we find it missing, this to aid later effort to minimize the number of update_rq_lock() calls. WARNING: CPU: 30 PID: 194 at ../kernel/sched/sched.h:797 assert_clock_updated() rq->clock_update_flags < RQCF_ACT_SKIP Call Trace: dump_stack() __warn() warn_slowpath_fmt() assert_clock_updated.isra.63.part.64() can_migrate_task() load_balance() pick_next_task_fair() __schedule() schedule() worker_thread() kthread() Signed-off-by: -
Peter Zijlstra authored
Instead of adding the update_rq_clock() all the way at the bottom of the callstack, add one at the top, this to aid later effort to minimize update_rq_lock() calls. WARNING: CPU: 0 PID: 1 at ../kernel/sched/sched.h:797 detach_task_cfs_rq() rq->clock_update_flags < RQCF_ACT_SKIP Call Trace: dump_stack() __warn() warn_slowpath_fmt() detach_task_cfs_rq() switched_from_fair() __sched_setscheduler() _sched_setscheduler() sched_set_stop_task() cpu_stop_create() __smpboot_create_thread.part.2() smpboot_register_percpu_thread_cpumask() cpu_stop_init() do_one_initcall() ? print_cpu_info() kernel_init_freeable() ? rest_init() kernel_init() ret_from_fork() Signed-off-by: -
Peter Zijlstra authored
Address this rq-clock update bug: WARNING: CPU: 0 PID: 0 at ../kernel/sched/sched.h:797 post_init_entity_util_avg() rq->clock_update_flags < RQCF_ACT_SKIP Call Trace: __warn() post_init_entity_util_avg() wake_up_new_task() _do_fork() kernel_thread() rest_init() start_kernel() Signed-off-by: -
Matt Fleming authored
Future patches will emit warnings if rq_clock() is called before update_rq_clock() inside a rq_pin_lock()/rq_unpin_lock() pair. Since there is only one caller of idle_balance() we can push the unpin/repin there. Signed-off-by:
-
Matt Fleming authored
rq_clock() is called from sched_info_{depart,arrive}() after resetting RQCF_ACT_SKIP but prior to a call to update_rq_clock(). In preparation for pending patches that check whether the rq clock has been updated inside of a pin context before rq_clock() is called, move the reset of rq->clock_skip_update immediately before unpinning the rq lock. This will avoid the new warnings which check if update_rq_clock() is being actively skipped. Signed-off-by: -
Matt Fleming authored
In preparation for adding diagnostic checks to catch missing calls to update_rq_clock(), provide wrappers for (re)pinning and unpinning rq->lock. Because the pending diagnostic checks allow state to be maintained in rq_flags across pin contexts, swap the 'struct pin_cookie' arguments for 'struct rq_flags *'. Signed-off-by:
-
Frederic Weisbecker authored
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y used to accumulate user time and account it on ticks and context switches only through the vtime_account_user() function. Now this model has been generalized on the 3 archs for all kind of cputime (system, irq, ...) and all the cputime flushing happens under vtime_account_user(). So let's rename this function to better reflect its new role. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1483636310-6557-11-git-send-email-fweisbec@gmail.comSigned-off-by:
-
Martin Schwidefsky authored
The account_system_time() function is called with a cputime that occurred while running in the kernel. The function detects which context the CPU is currently running in and accounts the time to the correct bucket. This forces the arch code to account the cputime for hardirq and softirq immediately. Such accounting function can be costly and perform unwelcome divisions and multiplications, among others. The arch code can delay the accounting for system time. For s390 the accounting is done once per timer tick and for each task switch. Signed-off-by:
-
Frederic Weisbecker authored
Currently CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y accounts the cputime on any context boundary: irq entry/exit, guest entry/exit, context switch, etc... Calling functions such as account_system_time(), account_user_time() and such can be costly, especially if they are called on many fastpath such as twice per IRQ. Those functions do more than just accounting to kcpustat and task cputime. Depending on the config, some subsystems can perform unpleasant multiplications and divisions, among other things. So lets accumulate the cputime instead and delay the accounting on ticks and context switches only. Signed-off-by:
-
Frederic Weisbecker authored
Currently CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y accounts the cputime on any context boundary: irq entry/exit, guest entry/exit, context switch, etc... Calling functions such as account_system_time(), account_user_time() and such can be costly, especially if they are called on many fastpath such as twice per IRQ. Those functions do more than just accounting to kcpustat and task cputime. Depending on the config, some subsystems can perform unpleasant multiplications and divisions, among other things. So lets accumulate the cputime instead and delay the accounting on ticks and context switches only. Signed-off-by:
-
Frederic Weisbecker authored
That in order to gather all cputime accumulation to the same place. Signed-off-by:
-
Frederic Weisbecker authored
In order to prepare for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y to delay cputime accounting to the tick, provide finegrained accumulators to powerpc in order to store the cputime until flushing. While at it, normalize the name of several fields according to common cputime naming. Signed-off-by:
-
Frederic Weisbecker authored
In order to prepare for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y to delay cputime accounting to the tick, let's allow archs to account cputime directly to gtime. Signed-off-by:
-
Frederic Weisbecker authored
In order to prepare for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y to delay cputime accounting to the tick, let's provide APIs to account system time to precise contexts: hardirq, softirq, pure system, ... Inspired-by:
-
Frederic Weisbecker authored
On task switch we must initialize the current cputime of the next task using the value of the previous task which got freshly updated. But we are confusing that with doing the opposite, which should result in incorrect cputime accounting. Signed-off-by:
-
Frederic Weisbecker authored
On context switch with powerpc32, the cputime is accumulated in the thread_info struct. So the switching-in task must move forward its start time snapshot to the current time in order to later compute the delta spent in system mode. This is what we do for the normal cputime by initializing the starttime field to the value of the previous task's starttime which got freshly updated. But we are missing the update of the scaled cputime start time. As a result we may be accounting too much scaled cputime later. Fix this by initializing the scaled cputime the same way we do for normal cputime. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "These are all over the place. The tracepoint part of the pull fixes a crash and adds a little more information to two tracepoints, while the rest are good old fashioned fixes" * 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: make tracepoint format strings more compact Btrfs: add truncated_len for ordered extent tracepoints Btrfs: add 'inode' for extent map tracepoint btrfs: fix crash when tracepoint arguments are freed by wq callbacks Btrfs: adjust outstanding_extents counter properly when dio write is split Btrfs: fix lockdep warning about log_mutex Btrfs: use down_read_nested to make lockdep silent btrfs: fix locking when we put back a delayed ref that's too new btrfs: fix error handling when run_delayed_extent_op fails btrfs: return the actual error value from from btrfs_uuid_tree_iterate
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "Two small fixups for the filesystem changes that went into this merge window" * tag 'ceph-for-4.10-rc4' of git://github.com/ceph/ceph-client: ceph: fix get_oldest_context() ceph: fix mds cluster availability check
-
git://github.com/awilliam/linux-vfioLinus Torvalds authored
Pull VFIO fixes from Alex Williamson: - Cleanups and bug fixes for the mtty sample driver (Dan Carpenter) - Export and make use of has_capability() to fix incorrect use of ns_capable() for testing task capabilities (Jike Song) * tag 'vfio-v4.10-rc4' of git://github.com/awilliam/linux-vfio: vfio/type1: Remove pid_namespace.h include vfio iommu type1: fix the testing of capability for remote task capability: export has_capability vfio-mdev: remove some dead code vfio-mdev: buffer overflow in ioctl() vfio-mdev: return -EFAULT if copy_to_user() fails
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: - fix for module unload vs deferred jump labels (note: there might be other buggy modules!) - two NULL pointer dereferences from syzkaller - also syzkaller: fix emulation of fxsave/fxrstor/sgdt/sidt, problem made worse during this merge window, "just" kernel memory leak on releases - fix emulation of "mov ss" - somewhat serious on AMD, less so on Intel * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix emulation of "MOV SS, null selector" KVM: x86: fix NULL deref in vcpu_scan_ioapic KVM: eventfd: fix NULL deref irqbypass consumer KVM: x86: Introduce segmented_write_std KVM: x86: flush pending lapic jump label updates on module unload jump_labels: API for flushing deferred jump label updates
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Fix huge_ptep_set_access_flags() to return "changed" when any of the ptes in the contiguous range is changed, not just the last one - Fix the adr_l assembly macro to work in modules under KASLR * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: assembler: make adr_l work in modules under KASLR arm64: hugetlb: fix the wrong return value for huge_ptep_set_access_flags
-
- 13 Jan, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "The major fix is the bfa firmware, since the latest 10Gb cards fail probing with the current firmware. The rest is a set of minor fixes: one missed Kconfig dependency causing randconfig failures, a missed error return on an error leg, a change for how multiqueue waits on a blocked device and a don't reset while in reset fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: bfa: Increase requested firmware version to 3.2.5.1 scsi: snic: Return error code on memory allocation failure scsi: fnic: Avoid sending reset to firmware when another reset is in progress scsi: qedi: fix build, depends on UIO scsi: scsi-mq: Wait for .queue_rq() if necessary
-
