- 22 Sep, 2011 8 commits
-
-
Jiri Slaby authored
This driver has been broken at least since 2008. At that time, a88487c7 (Fix compile errors in SGI console drivers) broke this driver completely. And since nobody noticed for the past 3 years, move it into staging. I think this will rot there and we will throw it away completely after some time. Or maybe someone will volunteer to fix it ;). Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
WANG Cong authored
KERN_CRIT is too high, replace those KERN_CRIT with KERN_ERR or KERN_WARNING. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Søren Holm authored
The EFR (Enhenced-Features-Register) is located at a different offset than the other devices supporting UART_CAP_EFR. This change add a special setup quick to set UPF_EXAR_EFR on the port. UPF_EXAR_EFR is then used to the port type to PORT_XR17D15X since it is for sure a XR17D15X uart. Signed-off-by:
Søren Holm <sgh@sgh.dk> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
WANG Cong authored
This patch fixes the following build error: drivers/tty/serial/crisv10.c:4453: error: 'if_ser0' undeclared (first use in this function): 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig drivers/tty/serial/crisv10.c:4453: error: (Each undeclared identifier is reported only once: 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig drivers/tty/serial/crisv10.c:4453: error: for each function it appears in.): 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig "if_ser0" is a typo, it should be "if_serial_0". Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: -
Jiri Slaby authored
linux/tty_flip.h is included in linux/serial_core.h. But this may (and will) change in the future. Then we would get build errors such as: .../tty/serial/max3107.c: In function ‘put_data_to_circ_buf’: .../tty/serial/max3107.c:149:2: error: implicit declaration of function ‘tty_insert_flip_string’ So fix all the drviers which call tty flip buffer helpers to really include linux/tty_flip.h. And also make sure that those include linux/tty.h when operating with struct tty_struct. Signed-off-by:
-
Jiri Slaby authored
The code is dead at least since 2002. So remove it to not distort git grep output (about port.tty usage). Remove the whole do_softirq tasklet as it's noop now. Signed-off-by:
-
Nobuhiro Iwamatsu authored
When mutex_lock is not called, mutex_unlock is sometimes called. This deletes unnecessary goto and makes modifications so that mutex_unlock is called. [ 8.304000] WARNING: at kernel/muex-debug.c:78 [ 8.304000] Modules linked in: [ 8.304000] [ 8.304000] Pid : 114, Comm: modprobe [ 8.304000] CPU : 0 Not tainted (3.1.0-rc3-next-20110826 #810) [ 8.304000] [ 8.304000] PC is at debug_mutex_unlock+0xf4/0x120 [ 8.304000] PR is at debug_mutex_unlock+0xe6/0x120 [ 8.304000] PC : 80051114 SP : 9f02de58 SR : 400081f1 TEA : 295cf4f2 [ 8.304000] R0 : 00000001 R1 : 00000000 R2 : 0000000f R3 : 00000000 [ 8.304000] R4 : 9fc63158 R5 : 00000000 R6 : 00000001 R7 : 9fe1de78 [ 8.304000] R8 : 805c6b2c R9 : 80003920 R10 : 00000000 R11 : 805c6b2c [ 8.304000] R12 : 80425ca0 R13 : 00000000 R14 : 9f02de58 [ 8.304000] MACH: 00000003 MACL: 00000000 GBR : 296e1678 PR : 80051106 [ 8.304000] [ 8.304000] Call trace: [ 8.304000] [<804236c6>] __mutex_unlock_slowpath+0x46/0x120 [ 8.304000] [<804237aa>] mutex_unlock+0xa/0x20 [ 8.304000] [<80240ed6>] uart_close+0x76/0x2c0 [ 8.304000] [<80223b98>] tty_release+0xf8/0x5c0 [ 8.304000] [<800a93a6>] lookup_object+0x26/0xa0 [ 8.304000] [<80063f6a>] call_rcu+0x8a/0xc0 [ 8.304000] [<800a944a>] put_object+0x2a/0x60 [ 8.304000] [<80003920>] arch_local_irq_restore+0x0/0x40 [ 8.304000] [<800af320>] fput+0x180/0x2c0 [ 8.304000] [<800af248>] fput+0xa8/0x2c0 [ 8.304000] [<800ab1a8>] filp_close+0x48/0xc0 [ 8.304000] [<800ab29a>] sys_close+0x7a/0x100 [ 8.304000] [<8000825a>] syscall_call+0xc/0x10 [ 8.304000] [<800ab220>] sys_close+0x0/0x100 [ 8.304000] [ 8.304000] Code: [ 8.304000] 8005110e: mov.l @r1, r1 [ 8.304000] 80051110: tst r1, r1 [ 8.304000] 80051112: bf 80051116 [ 8.304000] ->80051114: trapa #62 [ 8.304000] 80051116: mov.l @r8, r1 [ 8.304000] 80051118: tst r1, r1 [ 8.304000] 8005111a: bt.s 8005104c [ 8.304000] 8005111c: mov #0, r1 [ 8.304000] 8005111e: bra 80051056 [ 8.304000] [ 8.304000] ---[ end trace e8f8e04c313f429b ]--- Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by:
-
Marcus Folkesson authored
Errata E20: UART: Character Timeout interrupt remains set under certain software conditions. Implication: The software servicing the UART can be trapped in an infinite loop. Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
- 26 Aug, 2011 10 commits
-
-
Jamie Iles authored
The Synopsys DesignWare 8250 is an 8250 that has an extra interrupt that gets raised when writing to the LCR when busy. To handle this we need special serial_out, serial_in and handle_irq methods. Add a new platform driver that uses these accessors. Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jamie Iles <jamie@jamieiles.com> Signed-off-by:
-
Jamie Iles authored
Allow modules to use the normal 8250 irq handler inside their own. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Timur Tabi authored
The ePAPR hypervisor byte channel driver is supposed to work on all ePAPR-compliant embedded PowerPC systems, but it had a reference to the MSR_GS bit, which is available only on Book-E systems. Also fix a couple integer-to-pointer typecast problems. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Alan Cox authored
We want to keep refcounts properly on this against hangup. Signed-off-by:
-
Alexander Shishkin authored
This patch moves several occurences of similar code inside receive_chars(), which now also takes care of checking for break and calling sysrq handling code. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Feng Tang authored
Those info will be used when spi controller driver setup max3110 as a slave device Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by:
-
Dirk Brandewie authored
The main thread is waiting on on a wait_queue but wake_up_process() is used to wake the thread. This reads weirdly. Change wake_up_process() to wake_up(). Tested on the Moorestown tablet build Signed-off-by:
-
Alan Cox authored
A DISC on DLCI 0 should close down the mux but Michael Lauer reports this is not the case for some modems. Send a CLD as well. Signed-off-by:
-
Alan Cox authored
This is now out of date so fix it Signed-off-by:
-
Kristen Carlson Accardi authored
Doesn't appear to be much to do here, however having the suspend/resume functions will allow the d3/d0 transitions to be sent by the pci core. Signed-off-by:
Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by:
-
- 25 Aug, 2011 5 commits
-
-
Jiri Slaby authored
Let's use the newly added helper to avoid stalls in drivers which are not yet ported to tty_port helpers. Those which are broken (call tty_wait_until_sent with irqs disabled) are left untouched. They are in a deeper trouble than we are trying to solve here. This includes amiserial, 68328serial, 68360serial and crisv10. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jiri Slaby authored
Let's use the newly added helper to avoid stalls in drivers which are already ported to tty_port helpers. We have to ensure here, that there is no user of tty_port_close_start and tty_port_close which holds port->mutex (or other) lock over them. And sure, there is none. Signed-off-by:
-
Jiri Slaby authored
We need this helper to fix system stalls. The issue is that the rest of the system TTYs wait for us to finish waiting. This wasn't an issue with BKL. BKL used to unlock implicitly. This is based on the Arnd suggestion. Signed-off-by:
-
Jiri Slaby authored
So now, when we handle CLOSING flag, there is no point to hold port->mutex over the start of uart_close. Yes, there are still several things to reason about: * port->count etc is and always was protected by a spinlock * ->stop_rx is protected by a spinlock. Otherwise it would race with interrupts. * uart_wait_until_sent -- that one is already called without port->mutex from set_termios and tty_set_ldisc. Should anything be protected there, it would be tx_empty. And by a spinlock. 8250 does this internally... This step is needed to fix system stalls. To not create an AB-BA lock dependency (see next patches). Signed-off-by:
-
Jiri Slaby authored
We need to move port->mutex locking after wait_until_sent in uart_close (for rationale see next patches). But if we did it now, we would introduce a race between close and open. This is exactly why port->mutex is locked at the top of uart_close. To avoid the race, we add ASYNCB_CLOSING to uart_close. Like every other sane TTY driver. Thanks to tty_port_block_til_ready used in uart_open we will have this for free. Then we can move the port->mutex lock. Also note that this will make the conversion to tty_port helpers easier. They are currently handling ASYNC_CLOSING flag correctly. Signed-off-by:
-
- 24 Aug, 2011 8 commits
-
-
Thadeu Lima de Souza Cascardo authored
Instead of printing the head of the buffer, we should print the tail, which is the byte we are sending to the device. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
jsm uses a write queue that copies from uart_core circular buffer. This copying however has some bugs, like not wrapping the head counter. Since this write queue is also a circular buffer, the consumer function is ready to use the uart_core circular buffer directly. This buggy copying function was making some bytes be dropped when transmitting to a raw tty, doing something like this. [root@hostname ~]$ cat /dev/ttyn1 > cascardo/dump & [1] 2658 [root@hostname ~]$ cat /proc/tty/drivers > /dev/ttyn0 [root@hostname ~]$ cat /proc/tty/drivers /dev/tty /dev/tty 5 0 system:/dev/tty /dev/console /dev/console 5 1 system:console /dev/ptmx /dev/ptmx 5 2 system /dev/vc/0 /dev/vc/0 4 0 system:vtmaster jsm /dev/ttyn 250 0-31 serial serial /dev/ttyS 4 64-95 serial hvc /dev/hvc 229 0-7 system pty_slave /dev/pts 136 0-1048575 pty:slave pty_master /dev/ptm 128 0-1048575 pty:master unknown /dev/tty 4 1-63 console [root@hostname ~]$ cat cascardo/dump /dev/tty /dev/tty 5 0 system:/dev/tty /dev/console /dev/console 5 1 system:console /dev/ptmx /dev/ptmx 5 2 system /dev/vc/0 /dev/vc/0 4 0 system:vtmaste[root@hostname ~]$ This patch drops the driver write queue entirely, using the circular buffer from uart_core only. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
The flip buffer is not used anymore. Remove its allocation and declaration in the board structure. Signed-off-by:
-
Kukjin Kim authored
According to add support EXYNOS4212 SoC, we need to enable SERIAL_S5PV210 on EXYNOS4212. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Bernhard Roth authored
By default the atmel_serial driver in RS485 mode disables receiving data until all data in the send buffer has been sent. This flag allows to receive data even whilst sending data. Signed-off-by:
Bernhard Roth <br@pwrnet.de> Signed-off-by:
Claudio Scordino <claudio@evidence.eu.com> Acked-by:
-
Hui Wang authored
The imx UART hardware controller can identify BREAK character and the imx_set_termios() can accept BRKINT set by users, but current existing imx_rxint() can't pass BREAK character and TTY_BREAK to the tty layer as other serial drivers do (8250.c omap_serial.c). Here add code to handle BREAK character and pass it to tty layer. To detect error occurrence, i use URXD_ERR to replace (URXD_OVRRUN | URXD_FRMERR | ...) because any kind of error occurs, URXD_ERR will always be set to 1. I put the URXD_BRK to the first place to check since when BREAK error occurs, not only URXD_BRK is set to 1, but also URXD_PRERR and URXD_FRMERR are all set to 1. This arrangement can filter out fake parity and frame errors when BREAK error occurs. Signed-off-by:
Hui Wang <jason77.wang@gmail.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
-
Greg Kroah-Hartman authored
This reverts commit 6b1a98d1. It causes a build error that needs to be resolved differently. Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jamie Iles <jamie@jamieiles.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 14a8d47d. It causes a build error that needs to be resolved differently. Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jamie Iles <jamie@jamieiles.com> Signed-off-by:
-
- 23 Aug, 2011 9 commits
-
-
Jamie Iles authored
Support the DesignWare 8250 by a new compatible string and registering the DesignWare helpers. If the registration of the helpers fails, then continue as a normal 8250 as we may still get some useful debug out. Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jamie Iles authored
The Synopsys DesignWare 8250 is an 8250 that has an extra interrupt that gets raised when writing to the LCR when busy. To handle this we need special serial_out, serial_in and handle_irq methods. Add a new function serial8250_use_designware_io() that configures a uart_port with these accessors. Cc: Alan Cox <alan@linux.intel.com> Acked-by:
-
Jamie Iles authored
Now that platforms can override the port IRQ handler and the only user of these UPIO modes has been converted over, kill off UPIO_DWAPB and UPIO_DWAPB32. Acked-by:
-
Jamie Iles authored
The Synopsys DesignWare UART in pmc-sierra msp71xx has an extra feature where the UART detects a write attempt to the LCR whilst busy and raises an interrupt. The driver needs to clear the interrupt and rewrite the LCR. Move this into platform code and out of the 8250 driver. Acked-by:
Ralf Baechle <ralf@linux-mips.org> Acked-by:
-
Jamie Iles authored
Convert to pr_foo() helpers rather than printk(KERN_.*). Acked-by:
-
Jamie Iles authored
Some ports (e.g. Synopsys DesignWare 8250) have special requirements for handling the interrupts. Allow these platforms to specify their own interrupt handler that will override the default. serial8250_handle_irq() is provided so that platforms can extend the IRQ handler rather than completely replacing it. Signed-off-by:
-
Jamie Iles authored
Some serial ports may have unusal requirements for interrupt handling (e.g. the Synopsys DesignWare 8250-alike port and it's busy detect interrupt). Add a .handle_irq callback that can be used for platforms to override the interrupt behaviour in a similar fashion to the .serial_out and .serial_in callbacks. Signed-off-by:
-
Thomas Abraham authored
With uart tx/rx/err interrupt handling moved into the driver for s3c64xx and later SoC's, the uart interrupt handling in plaform code can be removed. The uart device irq resources is reduced to one and the related unused macros are removed. Suggested-by:
Grant Likely <grant.likely@secretlab.ca> CC: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
-
Thomas Abraham authored
s3c64xx and later SoC's include the interrupt mask and pending registers in the uart controller, unlike the s3c24xx SoC's which have these registers in the interrupt controller. When the mask and pending registers are part of the uart controller, a unified interrupt handler can handle the tx/rx interrupt. With this, the static reservation of interrupt numbers for the uart tx/rx/err interrupts in the linux irq space is not required and simplifies adding device tree support. Suggested-by:
-
