- 31 Aug, 2022 7 commits
-
-
David Thompson authored
This patch adds logic to compute the MDIO period based on the i1clk, and thereafter write the MDIO period into the YU MDIO config register. The i1clk resource from the ACPI table is used to provide addressing to YU bootrecord PLL registers. The values in these registers are used to compute MDIO period. If the i1clk resource is not present in the ACPI table, then the current default hardcorded value of 430Mhz is used. The i1clk clock value of 430MHz is only accurate for boards with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs have i1clk = 500MHz, but can support a slower MDIO period. Fixes: f92e1869 ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20220826155916.12491-1-davthompson@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Duoming Zhou authored
The function neigh_timer_handler() is a timer handler that runs in an atomic context. When used by rocker, neigh_timer_handler() calls "kzalloc(.., GFP_KERNEL)" that may sleep. As a result, the sleep in atomic context bug will happen. One of the processes is shown below: ofdpa_fib4_add() ... neigh_add_timer() (wait a timer) neigh_timer_handler() neigh_release() neigh_destroy() rocker_port_neigh_destroy() rocker_world_port_neigh_destroy() ofdpa_port_neigh_destroy() ofdpa_port_ipv4_neigh() kzalloc(sizeof(.., GFP_KERNEL) //may sleep This patch changes the gfp_t parameter of kzalloc() from GFP_KERNEL to GFP_ATOMIC in order to mitigate the bug. Fixes: 00fc0c51 ("rocker: Change world_ops API and implementation to be switchdev independant") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
Don't just print a warning. Clean up and return an error as well. Fixes: c8349639 ("net: lan966x: Add FDMA functionality") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/YwjgDm/SVd5c1tQU@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gao Xiao authored
When running `ethtool -p` with the old management firmware, the management firmware resource is not correctly released, which causes firmware related malfunction: all the access to management firmware hangs. It releases the management firmware resource when set id mode operation is not supported. Fixes: ccb9bc1d ("nfp: add 'ethtool --identify' support") Signed-off-by: Gao Xiao <gao.xiao@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20220829101651.633840-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'ieee802154-for-net-2022-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== ieee802154 for net 2022-08-29 - repeated word fix from Jilin Yuan. - missed return code setting in the cc2520 driver by Li Qiong. - fixing a potential race in by defering the workqueue destroy in the adf7242 driver by Lin Ma. - fixing a long standing problem in the mac802154 rx path to match corretcly by Miquel Raynal. * tag 'ieee802154-for-net-2022-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan: ieee802154: cc2520: add rc code in cc2520_tx() net: mac802154: Fix a condition in the receive path net/ieee802154: fix repeated words in comments ieee802154/adf7242: defer destroy_workqueue call ==================== Link: https://lore.kernel.org/r/20220829100308.2802578-1-stefan@datenfreihafen.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Horatiu Vultur authored
The same GPIO line can be shared by multiple phys for the coma mode pin. If that is the case then, all the other phys that share the same line will failed to be probed because the access to the gpio line is not non-exclusive. Fix this by making access to the gpio line to be nonexclusive using flag GPIOD_FLAGS_BIT_NONEXCLUSIVE. This allows all the other PHYs to be probed. Fixes: 738871b0 ("net: phy: micrel: add coma mode GPIO") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220830064055.2340403-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Alvaro Karsz authored
Fix wording in comments for the notifications coalescing feature. Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20220823073947.14774-1-alvaro.karsz@solid-run.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 30 Aug, 2022 2 commits
-
-
Wang Hai authored
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails to attach qdisc because there is no memory in attach_one_default_qdisc(). Then dev->qdisc will be noop_qdisc by default. But the other queues may be able to successfully attach to default qdisc. In this case, the fallback to noqueue process will be triggered. If the original attached qdisc is not released and a new one is directly attached, this will cause netdevice reference leaks. The following is the bug log: veth0: default qdisc (fq_codel) fail, fallback to noqueue unregister_netdevice: waiting for veth0 to become free. Usage count = 32 leaked reference. qdisc_alloc+0x12e/0x210 qdisc_create_dflt+0x62/0x140 attach_one_default_qdisc.constprop.41+0x44/0x70 dev_activate+0x128/0x290 __dev_open+0x12a/0x190 __dev_change_flags+0x1a2/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x332/0x1150 __rtnl_newlink+0x52f/0x8e0 rtnl_newlink+0x43/0x70 rtnetlink_rcv_msg+0x140/0x3b0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1bb/0x290 netlink_sendmsg+0x37c/0x4e0 sock_sendmsg+0x5f/0x70 ____sys_sendmsg+0x208/0x280 Fix this bug by clearing any non-noop qdiscs that may have been assigned before trying to re-attach. Fixes: bf6dba76 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail") Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Zhengchao Shao authored
The issue is the same to commit c2999f7f ("net: sched: multiq: don't call qdisc_put() while holding tree lock"). Qdiscs call qdisc_put() while holding sch tree spinlock, which results sleeping-while-atomic BUG. Fixes: c266f64d ("net: sched: protect block state with mutex") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220826013930.340121-1-shaozhengchao@huawei.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
- 29 Aug, 2022 5 commits
-
-
David S. Miller authored
Sebastian Andrzej Siewior says: ==================== net: u64_stats fixups for 32bit. while looking at the u64-stats patch https://lore.kernel.org/all/20220817162703.728679-10-bigeasy@linutronix.de I noticed that u64_stats_fetch_begin() is used. That suspicious thing about it is that network processing, including stats update, is performed in NAPI and so I would expect to see u64_stats_fetch_begin_irq() in order to avoid updates from NAPI during the read. This is only needed on 32bit-UP where the seqcount is not used. This is address in 2/2. The remaining user take some kind of precaution and may use u64_stats_fetch_begin(). I updated the previously mentioned patch to get rid of u64_stats_fetch_begin_irq(). If this is not considered stable patch worthy then it can be ignored and considred fixed by the other series which removes the special 32bit cases. The xrs700x driver reads and writes the counter from preemptible context so the only missing piece here is at least disable preemption on the writer side to avoid preemption while the writer is in progress. The possible reader would spin then until the writer completes its write critical section which is considered bad. This is addressed in 1/2 by using u64_stats_update_begin_irqsave() and so disable interrupts during the write critical section. The other closet resemblance I found is mdio_bus.c::mdiobus_stats_acct() where preemtion is disabled unconditionally. This is something I want to avoid since it also affects 64bit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the reader is in preemptible context and the writer side (u64_stats_update_begin*()) runs in an interrupt context (IRQ or softirq) then the writer can update the stats during the read operation. This update remains undetected. Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP are not interrupted by a writer. 32bit-SMP remains unaffected by this change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Catherine Sullivan <csully@google.com> Cc: David Awogbemila <awogbemila@google.com> Cc: Dimitris Michailidis <dmichail@fungible.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: oss-drivers@corigine.com Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Andrzej Siewior authored
xrs700x_read_port_counters() updates the stats from a worker using the u64_stats_update_begin() version. This is okay on 32-UP since on the reader side preemption is disabled. On 32bit-SMP the writer can be preempted by the reader at which point the reader will spin on the seqcount until writer continues and completes the update. Assigning the mib_mutex mutex to the underlying seqcount would ensure proper synchronisation. The API for that on the u64_stats_init() side isn't available. Since it is the only user, just use disable interrupts during the update. Use u64_stats_update_begin_irqsave() on the writer side to ensure an uninterrupted update. Fixes: ee00b24f ("net: dsa: add Arrow SpeedChips XRS700x driver") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li Qiong authored
The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW". Assign rc code with '-EINVAL' at this error path to fix it. Signed-off-by: Li Qiong <liqiong@nfschina.com> Link: https://lore.kernel.org/r/20220829071259.18330-1-liqiong@nfschina.comSigned-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
-
Miquel Raynal authored
Upon reception, a packet must be categorized, either it's destination is the host, or it is another host. A packet with no destination addressing fields may be valid in two situations: - the packet has no source field: only ACKs are built like that, we consider the host as the destination. - the packet has a valid source field: it is directed to the PAN coordinator, as for know we don't have this information we consider we are not the PAN coordinator. There was likely a copy/paste error made during a previous cleanup because the if clause is now containing exactly the same condition as in the switch case, which can never be true. In the past the destination address was used in the switch and the source address was used in the if, which matches what the spec says. Cc: stable@vger.kernel.org Fixes: ae531b94 ("ieee802154: use ieee802154_addr instead of *_sa variants") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.comSigned-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
-
- 27 Aug, 2022 7 commits
-
-
Jean-Francois Le Fillatre authored
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as a broken CDC device by default. Add the custom Lenovo PID to the r8152 driver to support it properly. Also, systems compatible with this dock provide a BIOS option to enable MAC address passthrough (as per Lenovo document "ThinkPad Docking Solutions 2017"). Add the custom PID to the MAC passthrough list too. Tested on a ThinkPad 13 1st gen with the expected results: passthrough disabled: Invalid header when reading pass-thru MAC addr passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tianyu Yuan authored
Referenced commit introduced nfp_policer_validate in the progress installing rate limiter. This validate check the action id and will reject police with CONTINUE, which is required to support ingress police offload. Fix this issue by allowing FLOW_ACTION_CONTINUE as notexceed action id in nfp_policer_validate Fixes: d97b4b10 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220825080845.507534-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Andrey Zhadchenko authored
ovs_dp_cmd_new()->ovs_dp_change()->ovs_dp_set_upcall_portids() allocates array via kmalloc. If for some reason new_vport() fails during ovs_dp_cmd_new() dp->upcall_portids must be freed. Add missing kfree. Kmemleak example: unreferenced object 0xffff88800c382500 (size 64): comm "dump_state", pid 323, jiffies 4294955418 (age 104.347s) hex dump (first 32 bytes): 5e c2 79 e4 1f 7a 38 c7 09 21 38 0c 80 88 ff ff ^.y..z8..!8..... 03 00 00 00 0a 00 00 00 14 00 00 00 28 00 00 00 ............(... backtrace: [<0000000071bebc9f>] ovs_dp_set_upcall_portids+0x38/0xa0 [<000000000187d8bd>] ovs_dp_change+0x63/0xe0 [<000000002397e446>] ovs_dp_cmd_new+0x1f0/0x380 [<00000000aa06f36e>] genl_family_rcv_msg_doit+0xea/0x150 [<000000008f583bc4>] genl_rcv_msg+0xdc/0x1e0 [<00000000fa10e377>] netlink_rcv_skb+0x50/0x100 [<000000004959cece>] genl_rcv+0x24/0x40 [<000000004699ac7f>] netlink_unicast+0x23e/0x360 [<00000000c153573e>] netlink_sendmsg+0x24e/0x4b0 [<000000006f4aa380>] sock_sendmsg+0x62/0x70 [<00000000d0068654>] ____sys_sendmsg+0x230/0x270 [<0000000012dacf7d>] ___sys_sendmsg+0x88/0xd0 [<0000000011776020>] __sys_sendmsg+0x59/0xa0 [<000000002e8f2dc1>] do_syscall_64+0x3b/0x90 [<000000003243e7cb>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: b83d23a2 ("openvswitch: Introduce per-cpu upcall dispatch") Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Andrey Zhadchenko <andrey.zhadchenko@virtuozzo.com> Link: https://lore.kernel.org/r/20220825020326.664073-1-andrey.zhadchenko@virtuozzo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Fainelli authored
Commit 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") unveiled that the smsc911x driver was not properly stopping and restarting the PHY during suspend/resume. Correct that by indicating that the MAC is in charge of PHY PM operations and ensure that all MDIO bus activity is quiescent during suspend. Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Fixes: 2aa70f86 ("net: smsc911x: Quieten netif during suspend") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220825023951.3220-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kai-Heng Feng authored
Commit d60cd063 ("PM: ACPI: reboot: Use S5 for reboot") caused a reboot hang on one Dell servers so the commit was reverted. Someone managed to collect the AER log and it's caused by MSI: [ 148.762067] ACPI: Preparing to enter system sleep state S5 [ 148.794638] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5 [ 148.803731] {1}[Hardware Error]: event severity: recoverable [ 148.810191] {1}[Hardware Error]: Error 0, type: fatal [ 148.816088] {1}[Hardware Error]: section_type: PCIe error [ 148.822391] {1}[Hardware Error]: port_type: 0, PCIe end point [ 148.829026] {1}[Hardware Error]: version: 3.0 [ 148.834266] {1}[Hardware Error]: command: 0x0006, status: 0x0010 [ 148.841140] {1}[Hardware Error]: device_id: 0000:04:00.0 [ 148.847309] {1}[Hardware Error]: slot: 0 [ 148.852077] {1}[Hardware Error]: secondary_bus: 0x00 [ 148.857876] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f [ 148.865145] {1}[Hardware Error]: class_code: 020000 [ 148.870845] {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00010000 [ 148.879842] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030 [ 148.886575] {1}[Hardware Error]: TLP Header: 40000001 0000030f 90028090 00000000 [ 148.894823] tg3 0000:04:00.0: AER: aer_status: 0x00100000, aer_mask: 0x00010000 [ 148.902795] tg3 0000:04:00.0: AER: [20] UnsupReq (First) [ 148.910234] tg3 0000:04:00.0: AER: aer_layer=Transaction Layer, aer_agent=Requester ID [ 148.918806] tg3 0000:04:00.0: AER: aer_uncor_severity: 0x000ef030 [ 148.925558] tg3 0000:04:00.0: AER: TLP Header: 40000001 0000030f 90028090 00000000 The MSI is probably raised by incoming packets, so power down the device and disable bus mastering to stop the traffic, as user confirmed this approach works. In addition to that, be extra safe and cancel reset task if it's running. Cc: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/all/b8db79e6857c41dab4ef08bdf826ea7c47e3bafc.1615947283.git.josef@toxicpanda.com/ BugLink: https://bugs.launchpad.net/bugs/1917471Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220826002530.1153296-1-kai.heng.feng@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Casper Andersson authored
Packets that are not of length divisible by 4 (e.g. 77, 78, 79) would have the checksum included up to next multiple of 4 (a 77 bytes packet would have 3 bytes of ethernet checksum included). The check for the value expects it in host (Little) endian. Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Link: https://lore.kernel.org/r/20220825084955.684637-1-casper.casan@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix handling of duplicate connection handle - Fix handling of HCI vendor opcode - Fix suspend performance regression - Fix build errors - Fix not handling shutdown condition on ISO sockets - Fix double free issue * tag 'for-net-2022-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: hold hdev->lock when cleanup hci_conn Bluetooth: move from strlcpy with unused retval to strscpy Bluetooth: hci_event: Fix checking conn for le_conn_complete_evt Bluetooth: ISO: Fix not handling shutdown condition Bluetooth: hci_sync: fix double mgmt_pending_free() in remove_adv_monitor() Bluetooth: MGMT: Fix Get Device Flags Bluetooth: L2CAP: Fix build errors in some archs Bluetooth: hci_sync: Fix suspend performance regression Bluetooth: hci_event: Fix vendor (unknown) opcode status handling ==================== Link: https://lore.kernel.org/r/20220825234559.1837409-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 26 Aug, 2022 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel borkmann says: ==================== The following pull-request contains BPF updates for your *net* tree. We've added 11 non-merge commits during the last 14 day(s) which contain a total of 13 files changed, 61 insertions(+), 24 deletions(-). The main changes are: 1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi. 2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger. 3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu. 4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui. 5) Fix range tracking for array poke descriptors, from Daniel Borkmann. 6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson. 7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian. 8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima. 9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller authored
Johannes Berg says: ==================== pull-request: wireless-2022-08-26 Here are a couple of fixes for the current cycle, see the tag description below. Just a couple of fixes: * two potential leaks * use-after-free in certain scan races * warning in IBSS code * error return from a debugfs file was wrong * possible NULL-ptr-deref when station lookup fails Please pull and let me know if there's any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Aug, 2022 17 commits
-
-
Zhengping Jiang authored
When disconnecting all devices, hci_conn_failed is used to cleanup hci_conn object when the hci_conn object cannot be aborted. The function hci_conn_failed requires the caller holds hdev->lock. Fixes: 9b3628d7 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted") Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Archie Pusaka authored
To prevent multiple conn complete events, we shouldn't look up the conn with hci_lookup_le_connect, since it requires the state to be BT_CONNECT. By the time the duplicate event is processed, the state might have changed, so we end up processing the new event anyway. Change the lookup function to hci_conn_hash_lookup_ba. Fixes: d5ebaa7c ("Bluetooth: hci_event: Ignore multiple conn complete events") Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
In order to properly handle shutdown syscall the code shall not assume that the how argument is always SHUT_RDWR resulting in SHUTDOWN_MASK as that would result in poll to immediately report EPOLLHUP instead of properly waiting for disconnect_cfm (Disconnect Complete) which is rather important for the likes of BAP as the CIG may need to be reprogrammed. Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Tetsuo Handa authored
syzbot is reporting double kfree() at remove_adv_monitor() [1], for commit 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") forgot to remove duplicated mgmt_pending_remove() when merging "if (err) {" path and "if (!pending) {" path. Link: https://syzkaller.appspot.com/bug?extid=915a8416bf15895b8e07 [1] Reported-by: syzbot <syzbot+915a8416bf15895b8e07@syzkaller.appspotmail.com> Fixes: 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
Get Device Flags don't check if device does actually use an RPA in which case it shall only set HCI_CONN_FLAG_REMOTE_WAKEUP if LL Privacy is enabled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This attempts to fix the follow errors: In function 'memcmp', inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9, inlined from 'l2cap_global_chan_by_psm' at net/bluetooth/l2cap_core.c:2003:15: ./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread] 44 | #define __underlying_memcmp __builtin_memcmp | ^ ./include/linux/fortify-string.h:420:16: note: in expansion of macro '__underlying_memcmp' 420 | return __underlying_memcmp(p, q, size); | ^~~~~~~~~~~~~~~~~~~ In function 'memcmp', inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9, inlined from 'l2cap_global_chan_by_psm' at net/bluetooth/l2cap_core.c:2004:15: ./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread] 44 | #define __underlying_memcmp __builtin_memcmp | ^ ./include/linux/fortify-string.h:420:16: note: in expansion of macro '__underlying_memcmp' 420 | return __underlying_memcmp(p, q, size); | ^~~~~~~~~~~~~~~~~~~ Fixes: 332f1795 ("Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This attempts to fix suspend performance when there is no connections by not updating the event mask. Fixes: ef61b6ea ("Bluetooth: Always set event mask on suspend") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Hans de Goede authored
Commit c8992cff ("Bluetooth: hci_event: Use of a function table to handle Command Complete") was (presumably) meant to only refactor things without any functional changes. But it does have one undesirable side-effect, before *status would always be set to skb->data[0] and it might be overridden by some of the opcode specific handling. While now it always set by the opcode specific handlers. This means that if the opcode is not known *status does not get set any more at all! This behavior change has broken bluetooth support for BCM4343A0 HCIs, the hci_bcm.c code tries to configure UART attached HCIs at a higher baudraute using vendor specific opcodes. The BCM4343A0 does not support this and this used to simply fail: [ 25.646442] Bluetooth: hci0: BCM: failed to write clock (-56) [ 25.646481] Bluetooth: hci0: Failed to set baudrate After which things would continue with the initial baudraute. But now that hci_cmd_complete_evt() no longer sets status for unknown opcodes *status is left at 0. This causes the hci_bcm.c code to think the baudraute has been changed on the HCI side and to also adjust the UART baudrate, after which communication with the HCI is broken, leading to: [ 28.579042] Bluetooth: hci0: command 0x0c03 tx timeout [ 36.961601] Bluetooth: hci0: BCM: Reset failed (-110) And non working bluetooth. Fix this by restoring the previous default "*status = skb->data[0]" handling for unknown opcodes. Fixes: c8992cff ("Bluetooth: hci_event: Use of a function table to handle Command Complete") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Daniel Borkmann authored
Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which is based on a customized syzkaller: BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0 Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489 CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x9c/0xc9 print_address_description.constprop.0+0x1f/0x1f0 ? bpf_int_jit_compile+0x1257/0x13f0 kasan_report.cold+0xeb/0x197 ? kvmalloc_node+0x170/0x200 ? bpf_int_jit_compile+0x1257/0x13f0 bpf_int_jit_compile+0x1257/0x13f0 ? arch_prepare_bpf_dispatcher+0xd0/0xd0 ? rcu_read_lock_sched_held+0x43/0x70 bpf_prog_select_runtime+0x3e8/0x640 ? bpf_obj_name_cpy+0x149/0x1b0 bpf_prog_load+0x102f/0x2220 ? __bpf_prog_put.constprop.0+0x220/0x220 ? find_held_lock+0x2c/0x110 ? __might_fault+0xd6/0x180 ? lock_downgrade+0x6e0/0x6e0 ? lock_is_held_type+0xa6/0x120 ? __might_fault+0x147/0x180 __sys_bpf+0x137b/0x6070 ? bpf_perf_link_attach+0x530/0x530 ? new_sync_read+0x600/0x600 ? __fget_files+0x255/0x450 ? lock_downgrade+0x6e0/0x6e0 ? fput+0x30/0x1a0 ? ksys_write+0x1a8/0x260 __x64_sys_bpf+0x7a/0xc0 ? syscall_enter_from_user_mode+0x21/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f917c4e2c2d The problem here is that a range of tnum_range(0, map->max_entries - 1) has limited ability to represent the concrete tight range with the tnum as the set of resulting states from value + mask can result in a superset of the actual intended range, and as such a tnum_in(range, reg->var_off) check may yield true when it shouldn't, for example tnum_range(0, 2) would result in 00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here represented by a less precise superset of {0, 1, 2, 3}. As the register is known const scalar, really just use the concrete reg->var_off.value for the upper index check. Fixes: d2e4c1e6 ("bpf: Constant map key tracking for prog array pokes") Reported-by: Hsin-Wei Hung <hsinweih@uci.edu> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Shung-Hsi Yu <shung-hsi.yu@suse.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/984b37f9fdf7ac36831d2137415a4a915744c1b6.1661462653.git.daniel@iogearbox.netSigned-off-by: Alexei Starovoitov <ast@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter (with one broken Fixes tag). Current release - new code bugs: - dsa: don't dereference NULL extack in dsa_slave_changeupper() - dpaa: fix <1G ethernet on LS1046ARDB - neigh: don't call kfree_skb() under spin_lock_irqsave() Previous releases - regressions: - r8152: fix the RX FIFO settings when suspending - dsa: microchip: keep compatibility with device tree blobs with no phy-mode - Revert "net: macsec: update SCI upon MAC address change." - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367 Previous releases - always broken: - netfilter: conntrack: work around exceeded TCP receive window - ipsec: fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid - moxa: get rid of asymmetry in DMA mapping/unmapping - dsa: microchip: make learning configurable and keep it off while standalone - ice: xsk: prohibit usage of non-balanced queue id - rxrpc: fix locking in rxrpc's sendmsg Misc: - another chunk of sysctl data race silencing" * tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) net: lantiq_xrx200: restore buffer if memory allocation failed net: lantiq_xrx200: fix lock under memory pressure net: lantiq_xrx200: confirm skb is allocated before using net: stmmac: work around sporadic tx issue on link-up ionic: VF initial random MAC address if no assigned mac ionic: fix up issues with handling EAGAIN on FW cmds ionic: clear broken state on generation change rxrpc: Fix locking in rxrpc's sendmsg net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2 MAINTAINERS: rectify file entry in BONDING DRIVER i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter net: Fix a data-race around sysctl_somaxconn. net: Fix a data-race around netdev_unregister_timeout_secs. net: Fix a data-race around gro_normal_batch. net: Fix data-races around sysctl_devconf_inherit_init_net. net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. net: Fix a data-race around netdev_budget_usecs. net: Fix data-races around sysctl_max_skb_frags. net: Fix a data-race around netdev_budget. ...
-
Jakub Kicinski authored
Aleksander Jan Bajkowski says: ==================== net: lantiq_xrx200: fix errors under memory pressure This series fixes issues that can occur in the driver under memory pressure. Situations when the system cannot allocate memory are rare, so the mentioned bugs have been fixed recently. The patches have been tested on a BT Home router with the Lantiq xRX200 chipset. Changelog: v3: - removed netdev_err() log from the first patch v2: - the second patch has been changed, so that under memory pressure situation the driver will not receive packets indefinitely regardless of the NAPI budget, - the third patch has been added. ==================== Link: https://lore.kernel.org/r/20220824215408.4695-1-olek2@wp.plSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Aleksander Jan Bajkowski authored
In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory. Fixes: 7ea6cd16 ("lantiq: net: fix duplicated skb in rx descriptor ring") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Aleksander Jan Bajkowski authored
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll function immediately returns an error. This is incorrect for two reasons: * the function terminates without enabling interrupts or scheduling NAPI, * the error code (-ENOMEM) is returned instead of the number of received packets. After the first memory allocation failure occurs, packet reception is locked due to disabled interrupts from DMA.. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Aleksander Jan Bajkowski authored
xrx200_hw_receive() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. Add a check in case build_skb() failed to allocate and return NULL. Fixes: e0155935 ("net: lantiq_xrx200: convert to build_skb") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Heiner Kallweit authored
This is a follow-up to the discussion in [0]. It seems to me that at least the IP version used on Amlogic SoC's sometimes has a problem if register MAC_CTRL_REG is written whilst the chip is still processing a previous write. But that's just a guess. Adding a delay between two writes to this register helps, but we can also simply omit the offending second write. This patch uses the second approach and is based on a suggestion from Qi Duan. Benefit of this approach is that we can save few register writes, also on not affected chip versions. [0] https://www.spinics.net/lists/netdev/msg831526.html Fixes: bfab27a1 ("stmmac: add the experimental PCI support") Suggested-by: Qi Duan <qi.duan@amlogic.com> Suggested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e) This series contains updates to ixgbe and i40e drivers. Jake stops incorrect resetting of SYSTIME registers when starting cyclecounter for ixgbe. Sylwester corrects a check on source IP address when validating destination for i40e. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter ==================== Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-