- 24 Apr, 2012 2 commits
-
-
Alex Deucher authored
This adds register definitions for HDMI/DP audio on DCE2/3/4/5 hardware. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Improve handling of bpc (bits per color) in radeon. In most cases we want 8 except for HDMI, DP, LVDS, and eDP. v2: handle DP better. Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
- 23 Apr, 2012 3 commits
-
-
Daniel Vetter authored
This regression has been introduced in commit f56f821f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Mar 25 19:47:41 2012 +0200 mm: extend prefault helpers to fault in more than PAGE_SIZE I have failed to notice this because x86 asm seems to happily compile things as-is. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Takashi Iwai authored
The new structs added in struct detailed_data_monitor_range must be marked with packed attribute although the outer struct itself is already marked as packed. Otherwise these 7-bytes structs may be aligned, and give the wrong position and size for the data. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
-
Takashi Iwai authored
HD panel (1366x768) found most commonly on laptops can't be represented exactly in CVT/DMT expression, which leads to 1368x768 instead, because 1366 can't be divided by 8. Add a hack to convert to 1366x768 manually as an exception. Signed-off-by:
-
- 20 Apr, 2012 22 commits
-
-
Jim Cromie authored
[airlied: fixed one more new one added since] Signed-off-by:
Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Reviewed-by:
-
Adam Jackson authored
Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Adam Jackson authored
Some common sizes that don't show up in DMT. Signed-off-by:
-
Adam Jackson authored
We want the same type for extra modes inferred from ranges. Signed-off-by:
-
Adam Jackson authored
Signed-off-by:
-
Adam Jackson authored
EDID 1.4 retcons the meaning of the "GTF feature" bit to mean "is continuous frequency", and moves the set of supported timing formulas into the range descriptor itself. In any event, the range descriptor can act as a filter on the DMT list without regard to a specific timing formula. Signed-off-by:
-
Adam Jackson authored
Signed-off-by:
-
Adam Jackson authored
Copied from the list in xserver. Signed-off-by:
-
Adam Jackson authored
Slightly more honest naming. Signed-off-by:
-
Adam Jackson authored
mode_in_range() handles what this was warning about. Signed-off-by:
-
Adam Jackson authored
It won't find any, yet. Fix up callers to match: standard mode codes will look prefer r-b modes for a given size if present, EST3 mode codes will look for exactly the r-b-ness mentioned in the mode code. This might mean fewer modes matched for EST3 mode codes between now and when the DMT mode list regrows the r-b modes, but practically speaking EST3 codes don't exist in the wild. Signed-off-by:
-
Adam Jackson authored
No functional change, but will make an upcoming change clearer. Signed-off-by:
-
Adam Jackson authored
Signed-off-by:
-
Paulo Zanoni authored
CEA modes 6, 7, 8, 9, 21, 22, 23, 24, 44, 45, 50, 51, 54, 55, 58 and 59 require sending pixel data 2 times. This doesn't mean the modes will work yet, but now the drivers know they're different. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
The specification defines a VIC (Video Identification Code) for each mode. When we're browsing drm_edid_modes.h, it really helps to have the number available (otherwise we have to count...). These numbers are also used in the EDID data (by the CEA-EXT extension block). Signed-off-by:
-
Lars-Peter Clausen authored
The CEA extension block has a field which describes which YCbCr modes are supported by the device, use it to fill the drm_display_info color_formats fields. Also the existence of a CEA extension block is used as indication that the device supports RGB. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Lars-Peter Clausen authored
The code should obviously check the EDID feature field for EDID feature flags and not the color_formats field of the drm_display_info struct. Also update the color_formats field with new modes instead of overwriting the current mode. Signed-off-by:
-
Ville Syrjälä authored
Perform some basic sanity check on some of the parameters in drm_mode_fb_cmd2. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
These functions return the chroma subsampling factors for the specified pixel format. Signed-off-by:
-
Ville Syrjälä authored
This function returns the bytes per pixel value based on the pixel format and plane index. Signed-off-by:
-
Ville Syrjälä authored
There will be a need for this function in drm_crtc.c later. This avoids making drm_crtc.c depend on drm_crtc_helper.c. Signed-off-by:
-
- 12 Apr, 2012 5 commits
-
-
Santosh Nayak authored
Replace "void *" by "u32 __iomem *" to silence sparse warning. Signed-off-by:
Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by:
-
Santosh Nayak authored
'break' is unnecessary after 'return' statement. Remove all such 'break' as clean up. Signed-off-by:
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
Daniel Vetter wrote First pull request for 3.5-next, slightly large than usual because new things kept coming in since the last pull for 3.4. Highlights: - first batch of hw enablement for vlv (Jesse et al) and hsw (Eugeni). pci ids are not yet added, and there's still quite a few patches to merge (mostly modesetting). To make QA easier I've decided to merge this stuff in pieces. - loads of cleanups and prep patches spurred by the above. Especially vlv is a real frankenstein chip, but also hsw is stretching our driver's code design. Expect more to come in this area for 3.5. - more gmbus fixes, cleanups and improvements by Daniel Kurtz. Again, there are more patches needed (and some already queued up), but I wanted to split this a bit for better testing. - pwrite/pread rework and retuning. This series has been in the works for a few months already and a lot of i-g-t tests have been created for it. Now it's finally ready to be merged. Note that one patch in this series touches include/pagemap.h, that patch is acked-by akpm. - reduce mappable pressure and relocation throughput improvements from Chris. - mmap offset exhaustion mitigation by Chris Wilson. - a start at figuring out which codepaths in our messy dri1/ums+gem/kms driver we actually need to support by bailing out of unsupported case. The driver now refuses to load without kms on gen6+ and disallows a few ioctls that userspace never used in certain cases. More of this will definitely come. - More decoupling of global gtt and ppgtt. - Improved dual-link lvds detection by Takashi Iwai. - Shut up the compiler + plus fix the fallout (Ben) - Inverted panel brightness handling (mostly Acer manages to break things in this way). - Small fixlets and adjustements and some minor things to help debugging. Regression-wise QA reported quite a few issues on ivb, but all of them turned out to be hw stability issues which are already fixed in drm-intel-fixes (QA runs the nightly regression tests on -next alone, without -fixes automatically merged in). There's still one issue open on snb, it looks like occlusion query writes are not quite as cache coherent as we've expected. With some of the pwrite adjustements we can now reliably hit this. Kernel workaround for it is in the works." * 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits) drm/i915: VCS is not the last ring drm/i915: Add a dual link lvds quirk for MacBook Pro 8,2 drm/i915: make quirks more verbose drm/i915: dump the DMA fetch addr register on pre-gen6 drm/i915/sdvo: Include YRPB as an additional TV output type drm/i915: disallow gem init ioctl on ilk drm/i915: refuse to load on gen6+ without kms drm/i915: extract gt interrupt handler drm/i915: use render gen to switch ring irq functions drm/i915: rip out old HWSTAM missed irq WA for vlv drm/i915: open code gen6+ ring irqs drm/i915: ring irq cleanups drm/i915: add SFUSE_STRAP registers for digital port detection drm/i915: add WM_LINETIME registers drm/i915: add WRPLL clocks drm/i915: add LCPLL control registers drm/i915: add SSC offsets for SBI access drm/i915: add port clock selection support for HSW drm/i915: add S PLL control drm/i915: add PIXCLK_GATE register ... Conflicts: drivers/char/agp/intel-agp.h drivers/char/agp/intel-gtt.c drivers/gpu/drm/i915/i915_debugfs.c
-
Dave Airlie authored
On coherent systems (not-AGP) the IB should be in cached memory so should be just as fast, so we can avoid copying to temporary pages and just use it directly. provides minor speedups on rv530: gears ~1820->1860, ipers: 29.9->30.6, but always good to use less CPU if we can. v3: cleanup unneeded bits. Reviewed-by:
-
Dave Airlie authored
This closes a race seen with kexec where we enable PCI bus mastering but the card has been reinitialised fully yet. This was previously fixed by a patch from Jerome, but this should close the race completely. v2: add SI support as suggested by Alex. Reported-and-tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
-
- 09 Apr, 2012 8 commits
-
-
Ben Widawsky authored
I made a mistake, please forgive me. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48254Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
-
Daniel Vetter authored
When booting with EFI, Apple botched this one up. v2: Switch the quirk dmesg output to DRM_INFO. v3: Actually git add the new things ... Tested-by:
Austin Lund <austin.lund@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42842Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-Off-by:
-
Daniel Vetter authored
And add informational dmesg output where it does not yet exist. In case a quirk matches too much, this information is crucial for debugging such a bug report. Reviewed-by:
-
Daniel Vetter authored
It exists way back to gen2, bug got moved around on gen4 a bit. Reviewed-by:
-
Chris Wilson authored
Reported-and-tested-by: Bo Wang < bo.b.wang@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997Signed-off-by:
-
Daniel Vetter authored
Ums is already disabled, but on ilk we can additionally disable gem initialization when using user mode setting. Upstream never support ilk without kernel modesetting and not even the RHEL ilk ums backport needs gem - that driver is based on xf86-video-intel version 2.2, which is pre-gem. Reviewed-by:
-
Daniel Vetter authored
Spurred by an irc discussion, let's start to clear up which parts of our kms + ums/gem + ums/dri1 + vbios/dri1 kernel driver pieces userspace in the wild actually uses. The idea is that we introduce checks at entry-points (module load time, ioctls, ...) first and then reap any obviously dead code in a second step. As a first step refuse to load without kms on chips where userspace never supported ums. Now upstream hasn't supported ums on ilk, ever. But RHEL had the great idea to backport the kms support to their ums driver. Cc: Dave Airlie <airlied@gmail.com> Signed-Off-by: -
Daniel Vetter authored
vlv, ivb and snb all share the gen6+ gt irq handling. 3 copies of the same stuff is a bit much, so extract it into a little helper. Now ilk has a different gt irq handling than snb, but shares the same irq handler (due to the similar display block). So also extract the ilk gt irq handling to clearly separate these two things. Nice side effect of this is that we can complete Ben Widawsky's gen6+ irq bit #define cleanup and call the render irq also with the GEN6 alias. Beforehand that code was shared with ilk, and neither option really made much sense. As a bonus this enables the error interrupt handling lifted from the vlv code on snb and ivb, too. Reviewed-by:
Ben Widawsky <ben@bwidawsk.net> Signed-Off-by:
-
