- 13 Aug, 2016 36 commits
-
-
Sunil Goutham authored
81xx has only 4 CPUs, so it doesn't make sense to initialize entire Qset i.e 8 queues by default. Made changes to queue initialization to init queues equal to number of CPUs or 8 queues whichever is lesser. Also this will be applicable to VMs with VNIC VF attached and having less VCPUs Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
This patch adds info on HW maximums of 81xx/83xx and also configures receive and transmit datapaths accordingly. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
This patch adds PCI device IDs of VNIC on newer chips and also registers VF driver with them. Device id remains same for all versions of chips but subsystem device id changes. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Current driver has most of the HW maximums info like no of channels, traffic limiters, RSS indices e.t.c in the form of macros. These have been moved into a 'hw_info' structure so that support for VNIC on newer chips with different set of HW maximums can be added. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Iyappan Subramanian says: ==================== Fix warning and issues This patch set fixes the following warning and issues, 1. Fix compiler warnings - drivers: net: xgene: Fix compiler warnings 2. unmap DMA memory on xgene_Enet_delete_bufpoool() - drivers: net: xgene: fix: Add dma_unmap_single 3. Delete descriptor rings and buffer pools on error - drivers: net: xgene: fix: Delete descriptor rings and buffer pools 4. Fix error desconstruction on probe() - drivers: net: xgene: Fix error deconstruction path 5. Fix RSS indirection table fields - drivers: net: xgene: Fix RSS indirection table fields 6. Change the port init sequence as per hardware specification - drivers: net: xgene: Change port init sequence 7. Fix link not recovered after link is down issue - drivers: net: xgene: XFI PCS reset when link is down 8. Fix link up is reported when no SFP+ module is plugged in issue - drivers: net: xgene: Poll link status via GPIO - dtb: xgene: Add rxlos-gpios property - Documentation: dtb: xgene: Add rxlos GPIO mapping 9. Fix backward compatibility when used with older driver - drivers: net: xgene: Fix backward compatibility - dtb: xgene: Fix backward compatibility v2: Address review comments from v1 - Fixed compiler warnings - Removed kbuild fix patch, since Arnd submitted the same - Changed Kconfig to select GPIOLIB (to fix kbuild warning) - Added rxlos-gpio documentation - Fixed backward compatibility with older driver v1: - Initial version ==================== Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch fixes the backward compatibility when used with older kernel. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch fixes the backward compatibility on handling phy_connect(), by iterating over the phy-handle, when new DT is used with older kernel. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
Added rxlos GPIO mapping by adding rxlos-gpios property. Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
When 10GbE SFP+ module is not plugged in or cable is not connected, the link status register does not report the proper state due to floating signal. This patch checks the module present status via an GPIO to determine whether to ignore the link status register and report link down. Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch fixes the link recovery issue, by doing PCS reset when the link is down. Signed-off-by: Fushen Chen <fchen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch rearranges the port initialization sequence as recommended by hardware specification. This patch also removes, mac_init() call from xgene_enet_link_state(), as it was not required. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
This patch fixes FPSel and NxtFPSel fields length to 5-bit value. Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Tested-by: Fushen Chen <fchen@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
Since register_netdev() call in xgene_enet_probe() was moved down to the end, it doesn't properly handle errors that may occur, by deconstructing everything that was setup before the error occurred. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
xgene_enet_init_hw() should delete any descriptor rings and buffer pools setup should le_ops->cle_init() return an error. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
In addition to xgene_enet_delete_bufpool() freeing skbs, their associated dma memory should also be unmapped. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Iyappan Subramanian authored
Fixed compiler warnings reported with -Wmaybe-uninitialized W=1, /drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_rx_frame’: ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:455:27: warning: variable ‘pdata’ set but not used [-Wunused-but-set-variable] struct xgene_enet_pdata *pdata; ^ ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_remove’: ../drivers/net/ethernet/apm/xgene/xgene_enet_main.c:1691:30: warning: variable ‘mac_ops’ set but not used [-Wunused-but-set-variable] const struct xgene_mac_ops *mac_ops; ^ Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Alexei Starovoitov says: ==================== bpf improvements Two bpf improvements: 1. allow bpf helpers like bpf_map_lookup_elem() access packet data directly for XDP programs 2. enable bpf_get_prandom_u32() for tracing programs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
bpf_get_prandom_u32() was initially introduced for socket filters and later requested numberous times to be added to tracing bpf programs for the same reason as in socket filters: to be able to randomly select incoming events. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aaron Yue authored
test various corner cases of the helper function access to the packet via crafted XDP programs. Signed-off-by: Aaron Yue <haoxuany@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
The helper functions like bpf_map_lookup_elem(map, key) were only allowing 'key' to point to the initialized stack area. That is causing performance degradation when programs need to process millions of packets per second and need to copy contents of the packet into the stack just to pass the stack pointer into the lookup() function. Allow such helpers read from the packet directly. All helpers that expect ARG_PTR_TO_MAP_KEY, ARG_PTR_TO_MAP_VALUE, ARG_PTR_TO_STACK assume byte aligned pointer, so no alignment concerns, only need to check that helper will not be accessing beyond the packet range verified by the prior 'if (ptr < data_end)' condition. For now allow this feature for XDP programs only. Later it can be relaxed for the clsact programs as well. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fixes the following sparse warning: net/ipv6/sit.c:1129:6: warning: symbol 'ipip6_valid_ip_proto' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sargun Dhillon says: ==================== Add test_current_task_under_cgroup bpf helper and test This patchset includes a helper and an example to determine whether the probe is currently executing in the context of a specific cgroup based on a cgroup bpf map / array. The helper checks the cgroupsv2 hierarchy based on the handle in the map and if the current cgroup is equal to it, or a descendant of it. The helper was tested with the example program, and it was verified that the correct behaviour occurs in the interrupt context. In an earlier version of this patchset I had added an "opensnoop"-like tool, and I realized I was basically reimplementing a lot of the code that already exists in the bcc repo. So, instead I decided to write a test that creates a new mount namespace, mounts up the cgroupv2 hierarchy, and does some basic tests. I used the sync syscall as a canary for these tests because it's a simple, 0-arg syscall. Once this patch is accepted, adding support to opensnoop will be easy. I also added a task_under_cgroup_hierarchy function in cgroups.h, as this pattern is used in a couple places. Converting those can be done in a later patchset. Thanks to Alexei, Tejun, and Daniel for providing review. v1->v2: Clean up v2->v3: Move around ifdefs out of *.c files, add an "integration" test v3->v4: De-genercize arraymap fetching function; rename helper from in_cgroup to under_cgroup (makes much more sense) Split adding cgroups task_under_cgroup_hierarchy function v4->v5: Fix formatting ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sargun Dhillon authored
This test has a BPF program which writes the last known pid to call the sync syscall within a given cgroup to a map. The user mode program creates its own mount namespace, and mounts the cgroupsv2 hierarchy in there, as on all current test systems (Ubuntu 16.04, Debian), the cgroupsv2 vfs is unmounted by default. Once it does this, it proceeds to test. The test checks for positive and negative condition. It ensures that when it's part of a given cgroup, its pid is captured in the map, and that when it leaves the cgroup, this doesn't happen. It populate a cgroups arraymap prior to execution in userspace. This means that the program must be run in the same cgroups namespace as the programs that are being traced. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sargun Dhillon authored
This adds a bpf helper that's similar to the skb_in_cgroup helper to check whether the probe is currently executing in the context of a specific subset of the cgroupsv2 hierarchy. It does this based on membership test for a cgroup arraymap. It is invalid to call this in an interrupt, and it'll return an error. The helper is primarily to be used in debugging activities for containers, where you may have multiple programs running in a given top-level "container". Signed-off-by: Sargun Dhillon <sargun@sargun.me> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sargun Dhillon authored
This commit adds an inline function to cgroup.h to check whether a given task is under a given cgroup hierarchy. This is to avoid having to put ifdefs in .c files to gate access to cgroups. When cgroups are disabled this always returns true. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== This feature patchset includes the following changes (mostly chronological order): - bump version strings, by Simon Wunderlich - kerneldoc clean up, by Sven Eckelmann - enable RTNL automatic loading and according documentation changes, by Sven Eckelmann (2 patches) - fix/improve interface removal and associated locking, by Sven Eckelmann (3 patches) - clean up unused variables, by Linus Luessing - implement Gateway selection code for B.A.T.M.A.N. V by Antonio Quartulli (4 patches) - rewrite TQ comparison by Markus Pargmann - fix Cocinelle warnings on bool vs integers (by Fenguang Wu/Intels kbuild test robot) and bitwise arithmetic operations (by Linus Luessing) - rewrite packet creation for forwarding for readability and to avoid reference count mistakes, by Linus Luessing - use kmem_cache for translation table, which results in more efficient storing of translation table entries, by Sven Eckelmann - rewrite/clarify reference handling for send_skb_unicast, by Sven Eckelmann - fix debug messages when updating routes, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Bert Kenward says: ==================== sfc: SFN8000 support improvements This series improves support for the recently released SFN8000 series of adapters. Specifically, it retrieves interrupt moderation timer settings directly from the adapter and uses those settings. It also uses a new event queue initialisation interface, allowing specification of a performance objective rather than enabling individual flags. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
On SFN8000 series adapters the MC provides a method to get the timer quantum and the maximum timer setting. We revert to the old values if the new call is unavailable. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
SFN8000-series NICs require a new method of setting interrupt moderation, via MCDI. This is indicated by a workaround flag. This new MCDI command takes an explicit time value rather than a number of ticks. It therefore makes sense to also store the moderation values in terms of time, since that is what the ethtool interface is interested in. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
Rather than explicitly specifying flags we can now specify a desired performance target to the firmware, ie higher throughput or lower latency. For now we use the default "auto" configuration. Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sean Wang authored
Since these critical sections protected by page_lock are all entered from the user context or bottom half context, they can be replaced with the spin_lock() or spin_lock_bh instead of spin_lock_irqsave(). Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Netanel Belgazal authored
This is a driver for the ENA family of networking devices. Signed-off-by: Netanel Belgazal <netanel@annapurnalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Aug, 2016 4 commits
-
-
David S. Miller authored
Kedareswara rao Appana says: ==================== net: phy: Add xilinx gmiitorgmii converter support The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media Independent Interface (RGMII) core provides the RGMII between RGMII-compliant Ethernet physical media devices (PHY) and the Gigabit Ethernet controller. This core can be used in all three modes of operation(10/100/1000 Mb/s). The Management Data Input/Output (MDIO) interface is used to configure the Speed of operation. This core can switch dynamically between the three Different speed modes by configuring the conveter register through mdio write. The conveter sits b/w the MAC and external phy like below MACB <==> GMII2RGMII <==> RGMII_PHY MDIO <========> GMII2RGMII MCAB <=======> <========> RGMII Using MAC MDIO bus we can access both the converter and the external PHY. We need to program the line speed of the converter during run time based On the external phy negotiated speed. This patch series does the below ---> Add mask for Control register 10Mbps speed. ---> Add support for xilinx gmiitorgmii converter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Appana Durga Kedareswara Rao authored
This patch adds support for gmiitorgmii converter. The GMII to RGMII IP core provides the Reduced Gigabit Media Independent Interface (RGMII) between Ethernet physical media Devices and the Gigabit Ethernet controller. This core can Switch dynamically between the three different speed modes of Operation by configuring the converter register through mdio write. MDIO interface is used to set operating speed of Ethernet MAC. This converter sits between the MAC and the external phy MAC <==> GMII2RGMII <==> RGMII_PHY Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Appana Durga Kedareswara Rao authored
Device-tree binding documentation for xilinx gmiitorgmii converter. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Appana Durga Kedareswara Rao authored
This patch adds mask for the Control register 10Mbps speed. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-