Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since vmid-mgr supports vmid sharing in one vm, the same ctx could
get different vmids for two emits without vm flush, vm_flush could
be done in another ring.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

should fist halt engine, and then doing the register
programing, and later unhalt engine, and finally run
ring_test.

this help fix reloading driver hang issue of SDMA
ring

original sequence is wrong for it programing engine
after unhalt, which will lead to fault behavior when
doing driver reloading after unloaded.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This help fix reloading driver hang issue of SDMA
ring
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This help fix reloading driver hang issue of SDMA
ring
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We need to release the firmware on driver tear down.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1,should use late_fini to kfree all resource otherwise
the released pointer maybe accessed in IRQ ip fini routine.

2,hwmgr should not be kfree by pem_fini which is invoked
by hw fini path.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This implements late_init support for powerplay.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This give IP modules an optional late cleanup
function.  This is needed to handle tricky inter-module
dependencies during tear down.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Exclude AVFS related fields when update powertune table to hw.
The driver shouldn't set them directly.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix the raster config setting for different iceland configs.
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This pull request brings in vblank/pageflip fixes I had hoped to see
merged before 4.7rc1, plus two new fixes that have come in since then.

* tag 'drm-vc4-fixes-2016-06-06' of github.com:anholt/linux:
  drm/vc4: Make pageflip completion handling more robust.
  drm/vc4: Fix ioctl permissions for render nodes.
  drm/vc4: Return -EBUSY if there's already a pending flip event.
  drm/vc4: Fix drm_vblank_put/get imbalance in page flip path.
  drm/vc4: Fix get_vblank_counter with proper no-op for Linux 4.4+

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixes for two issues reported by KASAN, a display engine hang due to
incorrect BIOS table parsing, and incorrect LTC interrupt handling on
Maxwell which could lead to a never-ending interrupt storm.

* 'linux-4.7' of git://github.com/skeggsb/linux:
  drm/nouveau/disp/sor/gm107: training pattern registers are like gm200
  drm/nouveau/disp/sor/gf119: both links use the same training register
  drm/nouveau/core: swap the order of imem/fb
  drm/nouveau/fbcon: fix out-of-bounds memory accesses
  drm/nouveau/gr/gf100-: update sm error decoding from gk20a nvgpu headers
  drm/nouveau/ltc/gm107-: fix typo in the address of NV_PLTCG_LTC0_LTS0_INTR
  drm/nouveau/bios/disp: fix handling of "match any protocol" entries

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

It appears that, for whatever reason, both link A and B use the same
register to control the training pattern.  It's a little odd, as the
GPUs before this (Tesla/Fermi1) have per-link registers, as do newer
GPUs (Maxwell).

Fixes the third DP output on NVS 510 (GK107).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Protect both the setup of the pageflip event and the
latching of the new requested displaylist head pointer
by the event lock, so we can't get into a situation
where vc4_atomic_flush latches the new display list via
HVS_WRITE, then immediately gets preempted before queueing
the pageflip event, then the page-flip completes in hw and
the vc4_crtc_handle_page_flip() runs and no-ops due to
lack of a pending pageflip event, then vc4_atomic_flush
continues and only then queues the pageflip event - after
the page flip handling already no-oped. This would cause
flip completion handling only at the next vblank - one
frame too late.

In vc4_crtc_handle_page_flip() check the actual DL head
pointer in SCALER_DISPLACTX against the requested pointer
for page flip to make sure that the flip actually really
completed in the current vblank and doesn't get deferred
to the next one because the DL head pointer was written
a bit too late into SCALER_DISPLISTX, after start of
vblank, and missed the boat. This avoids handling a
pageflip completion too early - one frame too early.

According to Eric, DL head pointer updates which were
written into the HVS DISPLISTX reg get committed to hardware
at the last pixel of active scanout. Our vblank interrupt
handler, as triggered by PV_INT_VFP_START irq, gets to run
earliest at the first pixel of HBLANK at the end of the
last scanline of active scanout, ie. vblank irq handling
runs at least 1 pixel duration after a potential pageflip
completion happened in hardware.

This ordering of events in the hardware, together with the
lock protection and SCALER_DISPLACTX sampling of this patch,
guarantees that pageflip completion handling only runs at
exactly the vblank irq of actual pageflip completion in all
cases.

Background info from Eric about the relative timing of
HVS, PV's and trigger points for interrupts, DL updates:

https://lists.freedesktop.org/archives/dri-devel/2016-May/107510.html

Tested on RPi 2B with hardware timing measurement equipment
and shown to no longer complete flips too early or too late.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

Contrary to other flags to DRM_IOCTL_DEF_DRV(), which restrict usage,
the flag for render node is an enabler (the IOCTL can't be used from
render node if it's not present).  So DRM_RENDER_ALLOW needs to be
added to all the flags that were previously 0.
Signed-off-by: Herve Jourdain <herve.jourdain@neuf.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes: 0cd3e274 ("drm/vc4: Add missing render node support")

Pull parisc fixes from Helge Deller:

 - Fix printk time stamps on SMP systems which got wrong due to a patch
   which was added during the merge window

 - Fix two bugs in the stack backtrace code: Races in module unloading
   and possible invalid accesses to memory due to wrong instruction
   decoding (Mikulas Patocka)

 - Fix userspace crash when syscalls access invalid unaligned userspace
   addresses.  Those syscalls will now return EFAULT as expected.
   (tagged for stable kernel series)

* 'parisc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Move die_if_kernel() prototype into traps.h header
  parisc: Fix pagefault crash in unaligned __get_user() call
  parisc: Fix printk time during boot
  parisc: Fix backtrace on PA-RISC

Pull key handling update from James Morris:
 "This alters a new keyctl function added in the current merge window to
  allow for a future extension planned for the next merge window"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Add placeholder for KDF usage with DH

The /dev/ptmx device node is changed to lookup the directory entry "pts"
in the same directory as the /dev/ptmx device node was opened in.  If
there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx
uses that filesystem.  Otherwise the open of /dev/ptmx fails.

The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that
userspace can now safely depend on each mount of devpts creating a new
instance of the filesystem.

Each mount of devpts is now a separate and equal filesystem.

Reserved ttys are now available to all instances of devpts where the
mounter is in the initial mount namespace.

A new vfs helper path_pts is introduced that finds a directory entry
named "pts" in the directory of the passed in path, and changes the
passed in path to point to it.  The helper path_pts uses a function
path_parent_directory that was factored out of follow_dotdot.

In the implementation of devpts:
 - devpts_mnt is killed as it is no longer meaningful if all mounts of
   devpts are equal.
 - pts_sb_from_inode is replaced by just inode->i_sb as all cached
   inodes in the tty layer are now from the devpts filesystem.
 - devpts_add_ref is rolled into the new function devpts_ptmx.  And the
   unnecessary inode hold is removed.
 - devpts_del_ref is renamed devpts_release and reduced to just a
   deacrivate_super.
 - The newinstance mount option continues to be accepted but is now
   ignored.

In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as
they are never used.

Documentation/filesystems/devices.txt is updated to describe the current
situation.

This has been verified to work properly on openwrt-15.05, centos5,
centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3,
ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1,
slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01.  With the
caveat that on centos6 and on slackware-14.1 that there wind up being
two instances of the devpts filesystem mounted on /dev/pts, the lower
copy does not end up getting used.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Helge Deller <deller@gmx.de>

One of the debian buildd servers had this crash in the syslog without
any other information:

 Unaligned handler failed, ret = -2
 clock_adjtime (pid 22578): Unaligned data reference (code 28)
 CPU: 1 PID: 22578 Comm: clock_adjtime Tainted: G  E  4.5.0-2-parisc64-smp #1 Debian 4.5.4-1
 task: 000000007d9960f8 ti: 00000001bde7c000 task.ti: 00000001bde7c000

      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
 PSW: 00001000000001001111100000001111 Tainted: G            E
 r00-03  000000ff0804f80f 00000001bde7c2b0 00000000402d2be8 00000001bde7c2b0
 r04-07  00000000409e1fd0 00000000fa6f7fff 00000001bde7c148 00000000fa6f7fff
 r08-11  0000000000000000 00000000ffffffff 00000000fac9bb7b 000000000002b4d4
 r12-15  000000000015241c 000000000015242c 000000000000002d 00000000fac9bb7b
 r16-19  0000000000028800 0000000000000001 0000000000000070 00000001bde7c218
 r20-23  0000000000000000 00000001bde7c210 0000000000000002 0000000000000000
 r24-27  0000000000000000 0000000000000000 00000001bde7c148 00000000409e1fd0
 r28-31  0000000000000001 00000001bde7c320 00000001bde7c350 00000001bde7c218
 sr00-03  0000000001200000 0000000001200000 0000000000000000 0000000001200000
 sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d2e84 00000000402d2e88
  IIR: 0ca0d089    ISR: 0000000001200000  IOR: 00000000fa6f7fff
  CPU:        1   CR30: 00000001bde7c000 CR31: ffffffffffffffff
  ORIG_R28: 00000002369fe628
  IAOQ[0]: compat_get_timex+0x2dc/0x3c0
  IAOQ[1]: compat_get_timex+0x2e0/0x3c0
  RP(r2): compat_get_timex+0x40/0x3c0
 Backtrace:
  [<00000000402d4608>] compat_SyS_clock_adjtime+0x40/0xc0
  [<0000000040205024>] syscall_exit+0x0/0x14

This means the userspace program clock_adjtime called the clock_adjtime()
syscall and then crashed inside the compat_get_timex() function.
Syscalls should never crash programs, but instead return EFAULT.

The IIR register contains the executed instruction, which disassebles
into "ldw 0(sr3,r5),r9".
This load-word instruction is part of __get_user() which tried to read the word
at %r5/IOR (0xfa6f7fff). This means the unaligned handler jumped in.  The
unaligned handler is able to emulate all ldw instructions, but it fails if it
fails to read the source e.g. because of page fault.

The following program reproduces the problem:

#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>

int main(void) {
        /* allocate 8k */
        char *ptr = mmap(NULL, 2*4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
        /* free second half (upper 4k) and make it invalid. */
        munmap(ptr+4096, 4096);
        /* syscall where first int is unaligned and clobbers into invalid memory region */
        /* syscall should return EFAULT */
        return syscall(__NR_clock_adjtime, 0, ptr+4095);
}

To fix this issue we simply need to check if the faulting instruction address
is in the exception fixup table when the unaligned handler failed. If it
is, call the fixup routine instead of crashing.

While looking at the unaligned handler I found another issue as well: The
target register should not be modified if the handler was unsuccessful.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org

Avoid showing invalid printk time stamps during boot.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>

This patch fixes backtrace on PA-RISC

There were several problems:

1) The code that decodes instructions handles instructions that subtract
from the stack pointer incorrectly. If the instruction subtracts the
number X from the stack pointer the code increases the frame size by
(0x100000000-X).  This results in invalid accesses to memory and
recursive page faults.

2) Because gcc reorders blocks, handling instructions that subtract from
the frame pointer is incorrect. For example, this function
	int f(int a)
	{
		if (__builtin_expect(a, 1))
			return a;
		g();
		return a;
	}
is compiled in such a way, that the code that decreases the stack
pointer for the first "return a" is placed before the code for "g" call.
If we recognize this decrement, we mistakenly believe that the frame
size for the "g" call is zero.

To fix problems 1) and 2), the patch doesn't recognize instructions that
decrease the stack pointer at all. To further safeguard the unwind code
against nonsense values, we don't allow frame size larger than
Total_frame_size.

3) The backtrace is not locked. If stack dump races with module unload,
invalid table can be accessed.

This patch adds a spinlock when processing module tables.

Note, that for correct backtrace, you need recent binutils.
Binutils 2.18 from Debian 5 produce garbage unwind tables.
Binutils 2.21 work better (it sometimes forgets function frames, but at
least it doesn't generate garbage).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull drm fixes from Dave Airlie:
 "A bunch of ARM drivers got into the fixes vibe this time around, so
  this contains a bunch of fixes for imx, atmel hlcdc, arm hdlcd (only
  so many combos of hlcd), mediatek and omap drm.

  Other than that there is one mgag200 fix and a few core drm regression
  fixes"

* tag 'drm-fixes-for-v4.7-rc2' of git://people.freedesktop.org/~airlied/linux: (34 commits)
  drm/omap: fix unused variable warning.
  drm: hdlcd: Add information about the underlying framebuffers in debugfs
  drm: hdlcd: Cleanup the atomic plane operations
  drm/hdlcd: Fix up crtc_state->event handling
  drm: hdlcd: Revamp runtime power management
  drm/mediatek: mtk_dsi: Remove spurious drm_connector_unregister
  drm/mediatek: mtk_dpi: remove invalid error message
  drm: atmel-hlcdc: fix a NULL check
  drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation
  drm/mgag200: Black screen fix for G200e rev 4
  drm: Wrap direct calls to driver->gem_free_object from CMA
  drm: fix fb refcount issue with atomic modesetting
  drm: make drm_atomic_set_mode_prop_for_crtc() more reliable
  drm/sti: remove extra mode fixup
  drm: add missing drm_mode_set_crtcinfo call
  drm/omap: include gpio/consumer.h where needed
  drm/omap: include linux/seq_file.h where needed
  Revert "drm/omap: no need to select OMAP2_DSS"
  drm/omap: Remove regulator API abuse
  OMAPDSS: HDMI5: Change DDC timings
  ...

Pull VFIO fixes from Alex Williamson:
 "Fix irqfd shutdown ordering, build warning, and VPD short read"

* tag 'vfio-v4.7-rc2' of git://github.com/awilliam/linux-vfio:
  vfio/pci: Allow VPD short read
  vfio/type1: Fix build warning
  vfio/pci: Fix ordering of eventfd vs virqfd shutdown

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix/restore behaviour when selecting bus width for (e)MMC

  MMC host:
   - sunxi: Fix eMMC HS-DDR modes on Allwinner A80"

* tag 'mmc-v4.7-rc1-2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sunxi: Re-enable eMMC HS-DDR modes on Allwinner A80
  mmc: sunxi: Fix DDR MMC timings for A80
  mmc: fix mmc mode selection for HS-DDR and higher

Pull btrfs fixes from Chris Mason:
 "The important part of this pull is Filipe's set of fixes for btrfs
  device replacement.  Filipe fixed a few issues seen on the list and a
  number he found on his own"

* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent
  Btrfs: fix race between device replace and read repair
  Btrfs: fix race between device replace and discard
  Btrfs: fix race between device replace and chunk allocation
  Btrfs: fix race setting block group back to RW mode during device replace
  Btrfs: fix unprotected assignment of the left cursor for device replace
  Btrfs: fix race setting block group readonly during device replace
  Btrfs: fix race between device replace and block group removal
  Btrfs: fix race between readahead and device replace/removal

Pull Ceph fixes from Sage Weil:
 "We have a few follow-up fixes for the libceph refactor from Ilya, and
  then some cephfs + fscache fixes from Zheng.

  The first two FS-Cache patches are acked by David Howells and deemed
  trivial enough to go through our tree.  The rest fix some issues with
  the ceph fscache handling (disable cache for inodes opened for write,
  and simplify the revalidation logic accordingly, dropping the
  now-unnecessary work queue)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: use i_version to check validity of fscache
  ceph: improve fscache revalidation
  ceph: disable fscache when inode is opened for write
  ceph: avoid unnecessary fscache invalidation/revlidation
  ceph: call __fscache_uncache_page() if readpages fails
  FS-Cache: make check_consistency callback return int
  FS-Cache: wake write waiter after invalidating writes
  libceph: use %s instead of %pE in dout()s
  libceph: put request only if it's done in handle_reply()
  libceph: change ceph_osdmap_flag() to take osdc

Pull ACPI fixes from Rafael Wysocki:
 "Two fixes for problems introduced recently (ACPICA and the ACPI
  backlight driver) and one fix for an older issue that prevents at
  least one system from booting.

  Specifics:

   - Fix an incorrect check introduced by recent ACPICA changes which
     causes problems with booting KVM guests to happen, among other
     things (Lv Zheng).

   - Fix a backlight issue introduced by recent changes to the ACPI
     video driver (Aaron Lu).

   - Fix the ACPI processor initialization which attempts to register an
     IO region without checking if that really is necessary and
     sometimes prevents drivers loaded subsequently from registering
     their resources which leads to boot issues (Rafael Wysocki)"

* tag 'acpi-4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / processor: Avoid reserving IO regions too early
  ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width()
  ACPI / Thermal / video: fix max_level incorrect value

Pull power management fixes from Rafael Wysocki:
 "Two fixes for problems introduced recently in the cpufreq core and the
  intel_pstate driver.

  Specifics:

   - Fix a silly mistake related to the clamp_val() usage in a function
     added by a recent commit (Rafael Wysocki).

   - Reduce the log level of an annoying message added to intel_pstate
     during the recent merge window (Srinivas Pandruvada)"

* tag 'pm-4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Fix clamp_val() usage in cpufreq_driver_fast_switch()
  cpufreq: intel_pstate: Downgrade print level for _PPC

Merge various fixes from Andrew Morton:
 "10 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, page_alloc: recalculate the preferred zoneref if the context can ignore memory policies
  mm, page_alloc: reset zonelist iterator after resetting fair zone allocation policy
  mm, oom_reaper: do not use siglock in try_oom_reaper()
  mm, page_alloc: prevent infinite loop in buffered_rmqueue()
  checkpatch: reduce git commit description style false positives
  mm/z3fold.c: avoid modifying HEADLESS page and minor cleanup
  memcg: add RCU locking around css_for_each_descendant_pre() in memcg_offline_kmem()
  mm: check the return value of lookup_page_ext for all call sites
  kdump: fix dmesg gdbmacro to work with record based printk
  mm: fix overflow in vm_map_ram()

Pull irq fixes from Thomas Gleixner:
 - a few simple fixes for fallout from the recent gic-v3 changes
 - a workaround for a Cavium thunderX erratum
 - a bugfix for the pic32 irqchip to make external interrupts work proper
 - a missing return value in the generic IPI management code

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-pic32-evic: Fix bug with external interrupts.
  irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144
  irqchip/gic-v3: Fix quiescence check in gic_enable_redist
  irqchip/gic-v3: Fix copy+paste mistakes in defines
  irqchip/gic-v3: Fix ICC_SGI1R_EL1.INTID decoding mask
  genirq: Fix missing return value in irq_destroy_ipi()

The optimistic fast path may use cpuset_current_mems_allowed instead of
of a NULL nodemask supplied by the caller for cpuset allocations.  The
preferred zone is calculated on this basis for statistic purposes and as
a starting point in the zonelist iterator.

However, if the context can ignore memory policies due to being atomic
or being able to ignore watermarks then the starting point in the
zonelist iterator is no longer correct.  This patch resets the zonelist
iterator in the allocator slowpath if the context can ignore memory
policies.  This will alter the zone used for statistics but only after
it is known that it makes sense for that context.  Resetting it before
entering the slowpath would potentially allow an ALLOC_CPUSET allocation
to be accounted for against the wrong zone.  Note that while nodemask is
not explicitly set to the original nodemask, it would only have been
overwritten if cpuset_enabled() and it was reset before the slowpath was
entered.

Link: http://lkml.kernel.org/r/20160602103936.GU2527@techsingularity.net
Fixes: c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Geert Uytterhoeven reported the following problem that bisected to
commit c33d6c06 ("mm, page_alloc: avoid looking up the first zone
in a zonelist twice") on m68k/ARAnyM

    BUG: scheduling while atomic: cron/668/0x10c9a0c0
    Modules linked in:
    CPU: 0 PID: 668 Comm: cron Not tainted 4.6.0-atari-05133-gc33d6c06 #364
    Call Trace: [<0003d7d0>] __schedule_bug+0x40/0x54
      __schedule+0x312/0x388
      __schedule+0x0/0x388
      prepare_to_wait+0x0/0x52
      schedule+0x64/0x82
      schedule_timeout+0xda/0x104
      set_next_entity+0x18/0x40
      pick_next_task_fair+0x78/0xda
      io_schedule_timeout+0x36/0x4a
      bit_wait_io+0x0/0x40
      bit_wait_io+0x12/0x40
      __wait_on_bit+0x46/0x76
      wait_on_page_bit_killable+0x64/0x6c
      bit_wait_io+0x0/0x40
      wake_bit_function+0x0/0x4e
      __lock_page_or_retry+0xde/0x124
      do_scan_async+0x114/0x17c
      lookup_swap_cache+0x24/0x4e
      handle_mm_fault+0x626/0x7de
      find_vma+0x0/0x66
      down_read+0x0/0xe
      wait_on_page_bit_killable_timeout+0x77/0x7c
      find_vma+0x16/0x66
      do_page_fault+0xe6/0x23a
      res_func+0xa3c/0x141a
      buserr_c+0x190/0x6d4
      res_func+0xa3c/0x141a
      buserr+0x20/0x28
      res_func+0xa3c/0x141a
      buserr+0x20/0x28

The relationship is not obvious but it's due to a failure to rescan the
full zonelist after the fair zone allocation policy exhausts the batch
count.  While this is a functional problem, it's also a performance
issue.  A page allocator microbenchmark showed the following

                                   4.7.0-rc1                  4.7.0-rc1
                                     vanilla                 reset-v1r2
  Min      alloc-odr0-1     327.00 (  0.00%)           326.00 (  0.31%)
  Min      alloc-odr0-2     235.00 (  0.00%)           235.00 (  0.00%)
  Min      alloc-odr0-4     198.00 (  0.00%)           198.00 (  0.00%)
  Min      alloc-odr0-8     170.00 (  0.00%)           170.00 (  0.00%)
  Min      alloc-odr0-16    156.00 (  0.00%)           156.00 (  0.00%)
  Min      alloc-odr0-32    150.00 (  0.00%)           150.00 (  0.00%)
  Min      alloc-odr0-64    146.00 (  0.00%)           146.00 (  0.00%)
  Min      alloc-odr0-128   145.00 (  0.00%)           145.00 (  0.00%)
  Min      alloc-odr0-256   155.00 (  0.00%)           155.00 (  0.00%)
  Min      alloc-odr0-512   168.00 (  0.00%)           165.00 (  1.79%)
  Min      alloc-odr0-1024  175.00 (  0.00%)           174.00 (  0.57%)
  Min      alloc-odr0-2048  180.00 (  0.00%)           180.00 (  0.00%)
  Min      alloc-odr0-4096  187.00 (  0.00%)           186.00 (  0.53%)
  Min      alloc-odr0-8192  190.00 (  0.00%)           190.00 (  0.00%)
  Min      alloc-odr0-16384 191.00 (  0.00%)           191.00 (  0.00%)
  Min      alloc-odr1-1     736.00 (  0.00%)           445.00 ( 39.54%)
  Min      alloc-odr1-2     343.00 (  0.00%)           335.00 (  2.33%)
  Min      alloc-odr1-4     277.00 (  0.00%)           270.00 (  2.53%)
  Min      alloc-odr1-8     238.00 (  0.00%)           233.00 (  2.10%)
  Min      alloc-odr1-16    224.00 (  0.00%)           218.00 (  2.68%)
  Min      alloc-odr1-32    210.00 (  0.00%)           208.00 (  0.95%)
  Min      alloc-odr1-64    207.00 (  0.00%)           203.00 (  1.93%)
  Min      alloc-odr1-128   276.00 (  0.00%)           202.00 ( 26.81%)
  Min      alloc-odr1-256   206.00 (  0.00%)           202.00 (  1.94%)
  Min      alloc-odr1-512   207.00 (  0.00%)           202.00 (  2.42%)
  Min      alloc-odr1-1024  208.00 (  0.00%)           205.00 (  1.44%)
  Min      alloc-odr1-2048  213.00 (  0.00%)           212.00 (  0.47%)
  Min      alloc-odr1-4096  218.00 (  0.00%)           216.00 (  0.92%)
  Min      alloc-odr1-8192  341.00 (  0.00%)           219.00 ( 35.78%)

Note that order-0 allocations are unaffected but higher orders get a
small boost from this patch and a large reduction in system CPU usage
overall as can be seen here:

             4.7.0-rc1   4.7.0-rc1
               vanilla  reset-v1r2
  User           85.32       86.31
  System       2221.39     2053.36
  Elapsed      2368.89     2202.47

Fixes: c33d6c06 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Link: http://lkml.kernel.org/r/20160531100848.GR2527@techsingularity.netSigned-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Oleg has noted that siglock usage in try_oom_reaper is both pointless
and dangerous.  signal_group_exit can be checked lockless.  The problem
is that sighand becomes NULL in __exit_signal so we can crash.

Fixes: 3ef22dff ("oom, oom_reaper: try to reap tasks which skip regular OOM killer path")
Link: http://lkml.kernel.org/r/1464679423-30218-1-git-send-email-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In DEBUG_VM kernel, we can hit infinite loop for order == 0 in
buffered_rmqueue() when check_new_pcp() returns 1, because the bad page
is never removed from the pcp list.  Fix this by removing the page
before retrying.  Also we don't need to check if page is non-NULL,
because we simply grab it from the list which was just tested for being
non-empty.

Fixes: 479f854a ("mm, page_alloc: defer debugging checks of pages allocated from the PCP")
Link: http://lkml.kernel.org/r/20160530090154.GM2527@techsingularity.netSigned-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>