- 12 Jan, 2015 14 commits
-
-
Rob Ward authored
Simplify the use of CONFIG_DEVPORT by making the port_fops so that it includes __maybe_unused. This enabled the multiple #ifdef's used for this structure to be removed and brings it in line with the use of CONFIG_DEVMEM This change should introduce no functional changes. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rob Ward authored
Simplify the use of CONFIG_DEVKMEM by making the kmem_fops so that it is __maybe_unused. This enabled the multiple #ifdef's used for this structure to be removed and brings it in line with the use of CONFIG_DEVMEM This change should introduce no functional changes. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rob Ward authored
Adds Kconfig option CONFIG_DEVMEM that allows the /dev/mem device to be disabled. Option defaults to /dev/mem enabled. Signed-off-by: Rob Ward <robert.ward114@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Leitner authored
The loop for measuring the square wave periods over some cycles is refactored to be more easily readable. This includes avoiding a "by-hand-implemented" for loop with a "real" one and adding some comments. Furthermore the following compiler warning is avoided by this patch: drivers/misc/ioc4.c: In function ‘ioc4_probe’: drivers/misc/ioc4.c:194:16: warning: ‘start’ may be used uninitialized in this function [-Wmaybe-uninitialized] period = (end - start) / ^ drivers/misc/ioc4.c:148:11: note: ‘start’ was declared here uint64_t start, end, period; ^ Signed-off-by: Richard Leitner <dev@g0hl1n.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gigi Joseph authored
We encounter situations where we got bad packet type from the UART (probably due to platform problem or UART driver issues) which caused us out of boundary array access, which eventually led to kernel panic. Signed-off-by: Amir Ayun <amira@ti.com> Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Leonid Iziumtsev <x0153368@ti.com> Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gigi Joseph authored
st_kim_ref() does not take care of the fact that platform_get_drvdata() might return NULL. On AM437x EVM, this causes the platform to stop booting as soon as the module is inserted. This patch fixes the issue by checking for NULL return value. Oops log follows. I have not tested BT functionality after this patch. But at least the platform boots now. [ 12.675697] Unable to handle kernel NULL pointer dereference at virtual address 0000005c [ 12.684310] pgd = c0004000 [ 12.687157] [0000005c] *pgd=00000000 [ 12.690927] Internal error: Oops: 17 [#1] SMP ARM [ 12.695873] Modules linked in: btwilink bluetooth ti_vpfe dwc3(+) ov2659 videobuf2_core v4l2_common videodev ti_am335x_adc 6lowpan_iphc matrix_keypad panel_dpi kfifo_buf pixcir_i2c_ts media industrialio videobuf2_dma_contig c_can_platform videobuf2_memops dwc3_omap c_can can_dev [ 12.721969] CPU: 0 PID: 1235 Comm: kworker/u3:0 Not tainted 3.14.25-02445-g9036ac6daed6 #128 [ 12.730937] Workqueue: hci0 hci_power_on [bluetooth] [ 12.736165] task: ebd93b40 ti: ecd7c000 task.ti: ecd7c000 [ 12.741856] PC is at st_kim_ref+0x30/0x40 [ 12.746071] LR is at st_kim_ref+0x30/0x40 [ 12.750289] pc : [<c03caf58>] lr : [<c03caf58>] psr: a0000013 [ 12.750289] sp : ecd7de08 ip : ecd7de08 fp : ecd7de1c [ 12.762365] r10: bf1e710c r9 : bf1e70ec r8 : bf1e7964 [ 12.767858] r7 : ebd2fd50 r6 : bf1e7964 r5 : 00000000 r4 : ecd7de24 [ 12.774723] r3 : c0957208 r2 : 00000000 r1 : c0957208 r0 : 00000000 [ 12.781589] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 12.789274] Control: 10c5387d Table: abde4059 DAC: 00000015 [ 12.795315] Process kworker/u3:0 (pid: 1235, stack limit = 0xecd7c248) Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gigi Joseph authored
In case the debugfs creation fails the whole init process was failing. There is no need to do this as the shared transport can work without it. Fix it so it just reports the failure and continue. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gigi Joseph authored
Suspend/resume was failing if callbacks were not registered. As it is ok not to do anything when suspending fix this so it soen't return an error and allow the system to suspend. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gigi Joseph authored
When using device tree, driver configuration data need to be read from device node. Add support for getting the platform data information from the device tree information stored in the .dtb file in case it exists. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: bvijay <bvijay@ti.com> Diff rendering mode:inlineside by side Signed-off-by: Gigi Joseph <gigi.joseph@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
Add uuid, me_addr addressing also for flow control credits. The only exception in cases for single buffer clients for which the host address in flow credits response is always 0 To in order to deal with add/remove race between fw and driver clients addressing we need to use [uuid, me_addr] tuple to address the clients Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
Mei bus receive and send function may return either number of transmitted bytes or errno. It is better to use ssize_t type for that purpose that mixing size_t with int. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dexuan Cui authored
In the case the host only injects an IPv6 address, the dhcp_enabled flag is true (it's only for IPv4 according to Hyper-V host team), but we still need to proceed to parse the IPv6 information. Cc: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-By: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
K. Y. Srinivasan authored
Replace calls for smp_processor_id() to get_cpu() to get the CPU ID of the current CPU. In these instances, there is no correctness issue with regards to preemption, we just need the current CPU ID. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matej Muzila authored
hv_fcopy_daemon is not mentioned in Makefile so it must be built manually. Add hv_fcopy_daemon to Makefile. Signed-off-by: Matej Muzila <mmuzila@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 29 Dec, 2014 1 commit
-
-
Linus Torvalds authored
-
- 28 Dec, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "The important fixes are for two bugs introduced by the merge window. On top of this, add a couple of WARN_ONs and stop spamming dmesg on pretty much every boot of a virtual machine" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: warn on more invariant breakage kvm: fix sorting of memslots with base_gfn == 0 kvm: x86: drop severity of "generation wraparound" message kvm: x86: vmx: reorder some msr writing
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "An embarrassing bug in lustre patches from this cycle ;-/" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression] braino in "lustre: use is_root_inode()"
-
Paolo Bonzini authored
Modifying a non-existent slot is not allowed. Also check that the first loop doesn't move a deleted slot beyond the used part of the mslots array. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Before commit 0e60b079 (kvm: change memslot sorting rule from size to GFN, 2014-12-01), the memslots' sorting key was npages, meaning that a valid memslot couldn't have its sorting key equal to zero. On the other hand, a valid memslot can have base_gfn == 0, and invalid memslots are identified by base_gfn == npages == 0. Because of this, commit 0e60b079 broke the invariant that invalid memslots are at the end of the mslots array. When a memslot with base_gfn == 0 was created, any invalid memslot before it were left in place. This can be fixed by changing the insertion to use a ">=" comparison instead of "<=", but some care is needed to avoid breaking the case of deleting a memslot; see the comment in update_memslots. Thanks to Tiejun Chen for posting an initial patch for this bug. Reported-by: Jamie Heilman <jamie@audible.transient.net> Reported-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
- 27 Dec, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Just a couple of fixes for the new Intel Skylake HD-audio support" * tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda_intel: apply the Seperate stream_tag for Skylake ALSA: hda_controller: Separate stream_tag for input and output streams.
-
Paolo Bonzini authored
Since most virtual machines raise this message once, it is a bit annoying. Make it KERN_DEBUG severity. Cc: stable@vger.kernel.org Fixes: 7a2e8aafSigned-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Tiejun Chen authored
The commit 34a1cd60, "x86: vmx: move some vmx setting from vmx_init() to hardware_setup()", tried to refactor some codes specific to vmx hardware setting into hardware_setup(), but some msr writing should depend on our previous setting condition like enable_apicv, enable_ept and so on. Reported-by: Jamie Heilman <jamie@audible.transient.net> Tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Al Viro authored
In one of the places (ll_md_blocking_ast()) we had open-coded !is_root_inode(inode) and replaced it with is_root_inode(inode). See the last chunk of f76c23: - inode != inode->i_sb->s_root->d_inode) + is_root_inode(inode)) should've been + !is_root_inode(inode)) obviously... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 26 Dec, 2014 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc build fix from Helge Deller: "This unbreaks the kernel compilation on parisc with gcc-4.9" * 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix out-of-register compiler error in ldcw inline assembler function
-
John David Anglin authored
The __ldcw macro has a problem when its argument needs to be reloaded from memory. The output memory operand and the input register operand both need to be reloaded using a register in class R1_REGS when generating 64-bit code. This fails because there's only a single register in the class. Instead, use a memory clobber. This also makes the __ldcw macro a compiler memory barrier. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Helge Deller <deller@gmx.de>
-
Libin Yang authored
The total stream number of Skylake's input and output stream exceeds 15, which will cause some streams do not work because of the overflow on SDxCTL.STRM field if using the legacy stream tag allocation method. This patch uses the new stream tag allocation method by add the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform. Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Rafal Redzimski authored
Implemented separate stream_tag assignment for input and output streams. According to hda specification stream tag must be unique throughout the input streams group, however an output stream might use a stream tag which is already in use by an input stream. This change is necessary to support HW which provides a total of more than 15 stream DMA engines which with legacy implementation causes an overflow on SDxCTL.STRM field (and the whole SDxCTL register) and as a result usage of Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller. Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Xmas fixes pull: core: one atomic fix, revert the WARN_ON dumb buffers patch. agp: fixup Dave J. nouveau: fix 3.18 regression for old userspace tegra fixes: vblank and iommu fixes amdkfd: fix bugs shown by testing with userspace, init apertures once msm: hdmi fixes and cleanup i915: misc fixes There is also a link ordering fix that I've asked to be cc'ed to you, putting iommu before gpu, it fixes an issue with amdkfd when things are all in the kernel, but I didn't like sending it via my tree without discussion. I'll probably be a bit on/off for a few weeks with pulls now, due to holidays and LCA, so don't be surprised if stuff gets a bit backed up, and things end up a bit large due to lag" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2" agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags nouveau: bring back legacy mmap handler drm/msm/hdmi: rework HDMI IRQ handler drm/msm/hdmi: enable regulators before clocks to avoid warnings drm/msm/mdp5: update irqs on crtc<->encoder link change drm/msm: block incoming update on pending updates drm/atomic: fix potential null ptr on plane enable drm/msm: Deletion of unnecessary checks before the function call "release_firmware" drm/msm: Deletion of unnecessary checks before two function calls drm/tegra: dc: Select root window for event dispatch drm/tegra: gem: Use the proper size for GEM objects drm/tegra: gem: Flush buffer objects upon allocation drm/tegra: dc: Fix a potential race on page-flip completion drm/tegra: dc: Consistently use the same pipe drm/irq: Add drm_crtc_vblank_count() drm/irq: Add drm_crtc_handle_vblank() drm/irq: Add drm_crtc_send_vblank_event() drm/i915: Disable PSMI sleep messages on all rings around context switches drm/i915: Force the CS stall for invalidate flushes ...
-
- 25 Dec, 2014 1 commit
-
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull ipmi driver bugfixes from Corey Minyard: "Fix two bugs: One that lockdep turned up, I didn't go far enough with cleanup of attributes for IPMI. This has been there a long time; my previous fix of this didn't fix all the attributes. One fix for some arches that need an explicit linux/ctype.h for isspace()" * tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix compile issue with isspace() ipmi: Finish cleanup of BMC attributes
-
- 24 Dec, 2014 3 commits
-
-
Dave Airlie authored
This reverts commit 355a7018. This had some bad side effects under normal operation, and should have been dropped earlier. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
- Display MEC fw version in topology. Without this, the HSA userspace stack is broken. - Init apertures information only once per process * tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux: amdkfd: init aperture once per process amdkfd: Display MEC fw version in topology node drm/radeon: Add implementation of get_fw_version drm/amd: Add get_fw_version to kfd-->kgd interface
-
git://git.infradead.org/users/pcmoore/auditLinus Torvalds authored
Pull audit fixes from Paul Moore: "Four patches to fix various problems with the audit subsystem, all are fairly small and straightforward. One patch fixes a problem where we weren't using the correct gfp allocation flags (GFP_KERNEL regardless of context, oops), one patch fixes a problem with old userspace tools (this was broken for a while), one patch fixes a problem where we weren't recording pathnames correctly, and one fixes a problem with PID based filters. In general I don't think there is anything controversial with this patchset, and it fixes some rather unfortunate bugs; the allocation flag one can be particularly scary looking for users" * 'upstream' of git://git.infradead.org/users/pcmoore/audit: audit: restore AUDIT_LOGINUID unset ABI audit: correctly record file names with different path name types audit: use supplied gfp_mask from audit_buffer in kauditd_send_multicast_skb audit: don't attempt to lookup PIDs when changing PID filtering audit rules
-
- 23 Dec, 2014 6 commits
-
-
Richard Guy Briggs authored
A regression was caused by commit 780a7654: audit: Make testing for a valid loginuid explicit. (which in turn attempted to fix a regression caused by e1760bd5) When audit_krule_to_data() fills in the rules to get a listing, there was a missing clause to convert back from AUDIT_LOGINUID_SET to AUDIT_LOGINUID. This broke userspace by not returning the same information that was sent and expected. The rule: auditctl -a exit,never -F auid=-1 gives: auditctl -l LIST_RULES: exit,never f24=0 syscall=all when it should give: LIST_RULES: exit,never auid=-1 (0xffffffff) syscall=all Tag it so that it is reported the same way it was set. Create a new private flags audit_krule field (pflags) to store it that won't interact with the public one from the API. Cc: stable@vger.kernel.org # v3.10-rc1+ Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - __cpu_suspend mm switching fix after warm boot - arch_setup_dma_ops implementation - pgd_page compilation error fix - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: Add pgd_page to support RCU fast_gup arm64: defconfig: defconfig update for 3.19 arm64: kernel: fix __cpu_suspend mm switch on warm-boot arm64: Replace set_arch_dma_coherent_ops with arch_setup_dma_ops
-
Jungseok Lee authored
This patch adds pgd_page definition in order to keep supporting HAVE_GENERIC_RCU_GUP configuration. In addition, it changes pud_page expression to align with pmd_page for readability. An introduction of pgd_page resolves the following build breakage under 4KB + 4Level memory management combo. mm/gup.c: In function 'gup_huge_pgd': mm/gup.c:889:2: error: implicit declaration of function 'pgd_page' [-Werror=implicit-function-declaration] head = pgd_page(orig); ^ mm/gup.c:889:7: warning: assignment makes pointer from integer without a cast head = pgd_page(orig); Cc: Will Deacon <will.deacon@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com> [catalin.marinas@arm.com: remove duplicate pmd_page definition] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Will Deacon authored
The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Lorenzo Pieralisi authored
On arm64 the TTBR0_EL1 register is set to either the reserved TTBR0 page tables on boot or to the active_mm mappings belonging to user space processes, it must never be set to swapper_pg_dir page tables mappings. When a CPU is booted its active_mm is set to init_mm even though its TTBR0_EL1 points at the reserved TTBR0 page mappings. This implies that when __cpu_suspend is triggered the active_mm can point at init_mm even if the current TTBR0_EL1 register contains the reserved TTBR0_EL1 mappings. Therefore, the mm save and restore executed in __cpu_suspend might turn out to be erroneous in that, if the current->active_mm corresponds to init_mm, on resume from low power it ends up restoring in the TTBR0_EL1 the init_mm mappings that are global and can cause speculation of TLB entries which end up being propagated to user space. This patch fixes the issue by checking the active_mm pointer before restoring the TTBR0 mappings. If the current active_mm == &init_mm, the code sets the TTBR0_EL1 to the reserved TTBR0 mapping instead of switching back to the active_mm, which is the expected behaviour corresponding to the TTBR0_EL1 settings when __cpu_suspend was entered. Fixes: 95322526 ("arm64: kernel: cpu_{suspend/resume} implementation") Cc: <stable@vger.kernel.org> # 3.14+: 18ab7db6 Cc: <stable@vger.kernel.org> # 3.14+: 714f5992 Cc: <stable@vger.kernel.org> # 3.14+: c3684fbb Cc: <stable@vger.kernel.org> # 3.14+ Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Dave Jones authored
- Remove soon-to-be-dead @redhat address. - Jeff Hartmann wrote the bulk of the original backend code, and should at least get a mention in the MODULE_AUTHOR for backend.o - Various people at Intel have done a lot more work than myself on the intel-* drivers, so again, mention that. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 22 Dec, 2014 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: "Thre stable fixes and one fix for a regression introduced during 3.19 merge: - Fix inability to discard used space when the thin-pool target is in out-of-data-space mode and also transition the thin-pool back to write mode once free space is made available. - Fix DM core bio-based end_io bug that prevented proper post-processing of the error code returned from the block layer. - Fix crash in DM thin-pool due to thin device being added to the pool's active_thins list before properly initializing the thin device's refcount" * tag 'dm-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix missed error code if .end_io isn't implemented by target_type dm thin: fix crash by initializing thin device's refcount and completion earlier dm thin: fix missing out-of-data-space to write mode transition if blocks are released dm thin: fix inability to discard blocks when in out-of-data-space mode
-
Kirill A. Shutemov authored
This reverts commit c8475d14. There are several[1][2] of bug reports which points to this commit as potential cause[3]. Let's revert it until we figure out what's going on. [1] https://lkml.org/lkml/2014/11/14/342 [2] https://lkml.org/lkml/2014/12/22/213 [3] https://lkml.org/lkml/2014/12/9/741Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-