- 22 May, 2019 40 commits
-
-
Barret Rhoden authored
commit 7bc04c5c upstream. When remounting with debug_want_extra_isize, we were not performing the same checks that we do during a normal mount. That allowed us to set a value for s_want_extra_isize that reached outside the s_inode_size. Fixes: e2b911c5 ("ext4: clean up feature test macros with predicate functions") Reported-by: syzbot+f584efa0ac7213c226b7@syzkaller.appspotmail.com Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Barret Rhoden <brho@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pan Bian authored
commit 8c380ab4 upstream. The reference to iloc.bh has been dropped in ext4_mark_iloc_dirty. However, the reference is dropped again if error occurs during ext4_handle_dirty_metadata, which may result in use-after-free bugs. Fixes: fb265c9c("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Theodore Ts'o authored
commit e5d01196 upstream. In other places in fs/ext4/xattr.c, if e_value_inum is non-zero, the code ignores the value in e_value_offs. The e_value_offs *should* be zero, but we shouldn't depend upon it, since it might not be true in a corrupted/fuzzed file system. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202897 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202877Signed-off-by:
-
Jan Kara authored
commit 31562b95 upstream. The sanity check in mb_find_extent() only checked that returned extent does not extend past blocksize * 8, however it should not extend past EXT4_CLUSTERS_PER_GROUP(sb). This can happen when clusters_per_group < blocksize * 8 and the tail of the bitmap is not properly filled by 1s which happened e.g. when ancient kernels have grown the filesystem. Signed-off-by:
-
Jiufei Xue authored
commit 742b06b5 upstream. We hit a BUG at fs/buffer.c:3057 if we detached the nbd device before unmounting ext4 filesystem. The typical chain of events leading to the BUG: jbd2_write_superblock submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)); The block device is removed and all the pages are invalidated. JBD2 was trying to write journal superblock to the block device which is no longer present. Fix this by checking the journal superblock's buffer head prior to submitting. Reported-by:
Eric Ren <renzhen@linux.alibaba.com> Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
-
Sergei Trofimovich authored
commit 46ca3f73 upstream. The bug manifests as an attempt to access deallocated memory: BUG: unable to handle kernel paging request at ffff9c8735448000 #PF error: [PROT] [WRITE] PGD 288a05067 P4D 288a05067 PUD 288a07067 PMD 7f60c2063 PTE 80000007f5448161 Oops: 0003 [#1] PREEMPT SMP CPU: 6 PID: 388 Comm: loadkeys Tainted: G C 5.0.0-rc6-00153-g5ded5871 #91 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M-D3H, BIOS F12 11/14/2013 RIP: 0010:__memmove+0x81/0x1a0 Code: 4c 89 4f 10 4c 89 47 18 48 8d 7f 20 73 d4 48 83 c2 20 e9 a2 00 00 00 66 90 48 89 d1 4c 8b 5c 16 f8 4c 8d 54 17 f8 48 c1 e9 03 <f3> 48 a5 4d 89 1a e9 0c 01 00 00 0f 1f 40 00 48 89 d1 4c 8b 1e 49 RSP: 0018:ffffa1b9002d7d08 EFLAGS: 00010203 RAX: ffff9c873541af43 RBX: ffff9c873541af43 RCX: 00000c6f105cd6bf RDX: 0000637882e986b6 RSI: ffff9c8735447ffb RDI: ffff9c8735447ffb RBP: ffff9c8739cd3800 R08: ffff9c873b802f00 R09: 00000000fffff73b R10: ffffffffb82b35f1 R11: 00505b1b004d5b1b R12: 0000000000000000 R13: ffff9c873541af3d R14: 000000000000000b R15: 000000000000000c FS: 00007f450c390580(0000) GS:ffff9c873f180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9c8735448000 CR3: 00000007e213c002 CR4: 00000000000606e0 Call Trace: vt_do_kdgkb_ioctl+0x34d/0x440 vt_ioctl+0xba3/0x1190 ? __bpf_prog_run32+0x39/0x60 ? mem_cgroup_commit_charge+0x7b/0x4e0 tty_ioctl+0x23f/0x920 ? preempt_count_sub+0x98/0xe0 ? __seccomp_filter+0x67/0x600 do_vfs_ioctl+0xa2/0x6a0 ? syscall_trace_enter+0x192/0x2d0 ksys_ioctl+0x3a/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x54/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The bug manifests on systemd systems with multiple vtcon devices: # cat /sys/devices/virtual/vtconsole/vtcon0/name (S) dummy device # cat /sys/devices/virtual/vtconsole/vtcon1/name (M) frame buffer device There systemd runs 'loadkeys' tool in tapallel for each vtcon instance. This causes two parallel ioctl(KDSKBSENT) calls to race into adding the same entry into 'func_table' array at: drivers/tty/vt/keyboard.c:vt_do_kdgkb_ioctl() The function has no locking around writes to 'func_table'. The simplest reproducer is to have initrams with the following init on a 8-CPU machine x86_64: #!/bin/sh loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & loadkeys -q windowkeys ru4 & wait The change adds lock on write path only. Reads are still racy. CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Jiri Slaby <jslaby@suse.com> Link: https://lkml.org/lkml/2019/2/17/256Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Yifeng Li authored
commit 75ddbc1f upstream. Previously, in the userspace, it was possible to use the "setterm" command from util-linux to blank the VT console by default, using the following command. According to the man page, > The force option keeps the screen blank even if a key is pressed. It was implemented by calling TIOCL_BLANKSCREEN. case BLANKSCREEN: ioctlarg = TIOCL_BLANKSCREEN; if (ioctl(STDIN_FILENO, TIOCLINUX, &ioctlarg)) warn(_("cannot force blank")); break; However, after Linux 4.12, this command ceased to work anymore, which is unexpected. By inspecting the kernel source, it shows that the issue was triggered by the side-effect from commit a4199f5e ("tty: Disable default console blanking interval"). The console blanking is implemented by function do_blank_screen() in vt.c: "blank_state" will be initialized to "blank_normal_wait" in con_init() if AND ONLY IF ("blankinterval" > 0). If "blankinterval" is 0, "blank_state" will be "blank_off" (== 0), and a call to do_blank_screen() will always abort, even if a forced blanking is required from the user by calling TIOCL_BLANKSCREEN, the console won't be blanked. This behavior is unexpected from a user's point-of-view, since it's not mentioned in any documentation. The setterm man page suggests it will always work, and the kernel comments in uapi/linux/tiocl.h says > /* keep screen blank even if a key is pressed */ > #define TIOCL_BLANKSCREEN 14 To fix it, we simply remove the "blank_state != blank_off" check, as pointed out by Nicolas Pitre, this check doesn't logically make sense and it's safe to remove. Suggested-by:
Nicolas Pitre <nicolas.pitre@linaro.org> Fixes: a4199f5e ("tty: Disable default console blanking interval") Signed-off-by:
Yifeng Li <tomli@tomli.me> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Chris Packham authored
commit d4197009 upstream. When the physmap_of_core.c code was merged into physmap-core.c the ability to use MTD_PHYSMAP_OF with only MTD_RAM selected was lost. Restore this by adding MTD_RAM to the dependencies of MTD_PHYSMAP. Fixes: commit 642b1e8d ("mtd: maps: Merge physmap_of.c into physmap-core.c") Cc: <stable@vger.kernel.org> Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Hamish Martin <hamish.martin@alliedtelesis.co.nz> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Chris Packham authored
commit 64d14c6f upstream. When the gpio-addr-flash.c driver was merged with physmap-core.c the code to store the current gpio_values was lost. This meant that once a gpio was asserted it was never de-asserted. Fix this by storing the current offset in gpio_values like the old driver used to. Fixes: commit ba32ce95 ("mtd: maps: Merge gpio-addr-flash.c into physmap-core.c") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Alexander Sverdlin authored
commit 2b75ebee upstream. It was observed that reads crossing 4K address boundary are failing. This limitation is mentioned in Intel documents: Intel(R) 9 Series Chipset Family Platform Controller Hub (PCH) Datasheet: "5.26.3 Flash Access Program Register Access: * Program Register Accesses are not allowed to cross a 4 KB boundary..." Enhanced Serial Peripheral Interface (eSPI) Interface Base Specification (for Client and Server Platforms): "5.1.4 Address For other memory transactions, the address may start or end at any byte boundary. However, the address and payload length combination must not cross the naturally aligned address boundary of the corresponding Maximum Payload Size. It must not cross a 4 KB address boundary." Avoid this by splitting an operation crossing the boundary into two operations. Fixes: 8afda8b2 ("spi-nor: Add support for Intel SPI serial flash controller") Cc: stable@vger.kernel.org Reported-by:
Romain Porte <romain.porte@nokia.com> Tested-by:
Pascal Fabreges <pascal.fabreges@nokia.com> Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Reviewed-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Dmitry Osipenko authored
commit ea611d1c upstream. The FPS_PERIOD_MAX_US definitions are swapped for MAX20024 and MAX77620, fix it. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Steve Twiss authored
commit 6b4814a9 upstream. Mismatch between what is found in the Datasheets for DA9063 and DA9063L provided by Dialog Semiconductor, and the register names provided in the MFD registers file. The changes are for the OTP (one-time-programming) control registers. The two naming errors are OPT instead of OTP, and COUNT instead of CONT (i.e. control). Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
-
Erik Schmauss authored
commit 11207b4d upstream. ACPICA commit c14f17fa0acf8c93497ce04b9a7f4ada51b69383 This flag should not be included in #ifndef CONFIG_ACPI. It should be used unconditionally. Link: https://github.com/acpica/acpica/commit/c14f17fa Fixes: aa9aaa4d ("ACPI: use different default debug value than ACPICA") Reported-by:
Gabriel C <nix.or.die@gmail.com> Tested-by:
Erik Schmauss <erik.schmauss@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Cc: 5.1+ <stable@vger.kernel.org> 5.1+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Rajat Jain authored
commit 2f844b61 upstream. I noticed that recently multiple systems (chromebooks) couldn't wake from S0ix using LID or Keyboard after updating to a newer kernel. I bisected and it turned up commit f941d3e4 ("ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle"). I checked that the issue got fixed if that commit was reverted. I debugged and found that although PNP0C0D:00 (representing the LID) is wake capable and should wakeup the system per the code in acpi_wakeup_gpe_init() and in drivers/acpi/button.c: localhost /sys # cat /proc/acpi/wakeup Device S-state Status Sysfs node LID0 S4 *enabled platform:PNP0C0D:00 CREC S5 *disabled platform:GOOG0004:00 *disabled platform:cros-ec-dev.1.auto *disabled platform:cros-ec-accel.0 *disabled platform:cros-ec-accel.1 *disabled platform:cros-ec-gyro.0 *disabled platform:cros-ec-ring.0 *disabled platform:cros-usbpd-charger.2.auto *disabled platform:cros-usbpd-logger.3.auto D015 S3 *enabled i2c:i2c-ELAN0000:00 PENH S3 *enabled platform:PRP0001:00 XHCI S3 *enabled pci:0000:00:14.0 GLAN S4 *disabled WIFI S3 *disabled pci:0000:00:14.3 localhost /sys # On debugging, I found that its corresponding GPE is not being enabled. The particular GPE's "gpe_register_info->enable_for_wake" does not have any bits set when acpi_enable_all_wakeup_gpes() comes around to use it. I looked at code and could not find any other code path that should set the bits in "enable_for_wake" bitmask for the wake enabled devices for s2idle. [I do see that it happens for S3 in acpi_sleep_prepare()]. Thus I used the same call to enable the GPEs for wake enabled devices, and verified that this fixes the regression I was seeing on multiple of my devices. [ rjw: The problem is that commit f941d3e4 ("ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle") forgot to add the acpi_enable_wakeup_devices() call for s2idle along with acpi_enable_all_wakeup_gpes(). ] Fixes: f941d3e4 ("ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle") Link: https://bugzilla.kernel.org/show_bug.cgi?id=203579Signed-off-by:
Rajat Jain <rajatja@google.com> [ rjw: Subject & changelog ] Cc: 5.0+ <stable@vger.kernel.org> # 5.0+ Signed-off-by:
-
Andrea Arcangeli authored
commit c3f3ce04 upstream. The task structure is freed while get_mem_cgroup_from_mm() holds rcu_read_lock() and dereferences mm->owner. get_mem_cgroup_from_mm() failing fork() ---- --- task = mm->owner mm->owner = NULL; free(task) if (task) *task; /* use after free */ The fix consists in freeing the task with RCU also in the fork failure case, exactly like it always happens for the regular exit(2) path. That is enough to make the rcu_read_lock hold in get_mem_cgroup_from_mm() (left side above) effective to avoid a use after free when dereferencing the task structure. An alternate possible fix would be to defer the delivery of the userfaultfd contexts to the monitor until after fork() is guaranteed to succeed. Such a change would require more changes because it would create a strict ordering dependency where the uffd methods would need to be called beyond the last potentially failing branch in order to be safe. This solution as opposed only adds the dependency to common code to set mm->owner to NULL and to free the task struct that was pointed by mm->owner with RCU, if fork ends up failing. The userfaultfd methods can still be called anywhere during the fork runtime and the monitor will keep discarding orphaned "mm" coming from failed forks in userland. This race condition couldn't trigger if CONFIG_MEMCG was set =n at build time. [aarcange@redhat.com: improve changelog, reduce #ifdefs per Michal] Link: http://lkml.kernel.org/r/20190429035752.4508-1-aarcange@redhat.com Link: http://lkml.kernel.org/r/20190325225636.11635-2-aarcange@redhat.com Fixes: 893e26e6 ("userfaultfd: non-cooperative: Add fork() event") Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Tested-by:
zhong jiang <zhongjiang@huawei.com> Reported-by: syzbot+cbb52e396df3e565ab02@syzkaller.appspotmail.com Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: zhong jiang <zhongjiang@huawei.com> Cc: syzbot+cbb52e396df3e565ab02@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Shuning Zhang authored
commit e091eab0 upstream. In some cases, ocfs2_iget() reads the data of inode, which has been deleted for some reason. That will make the system panic. So We should judge whether this inode has been deleted, and tell the caller that the inode is a bad inode. For example, the ocfs2 is used as the backed of nfs, and the client is nfsv3. This issue can be reproduced by the following steps. on the nfs server side, ..../patha/pathb Step 1: The process A was scheduled before calling the function fh_verify. Step 2: The process B is removing the 'pathb', and just completed the call to function dput. Then the dentry of 'pathb' has been deleted from the dcache, and all ancestors have been deleted also. The relationship of dentry and inode was deleted through the function hlist_del_init. The following is the call stack. dentry_iput->hlist_del_init(&dentry->d_u.d_alias) At this time, the inode is still in the dcache. Step 3: The process A call the function ocfs2_get_dentry, which get the inode from dcache. Then the refcount of inode is 1. The following is the call stack. nfsd3_proc_getacl->fh_verify->exportfs_decode_fh->fh_to_dentry(ocfs2_get_dentry) Step 4: Dirty pages are flushed by bdi threads. So the inode of 'patha' is evicted, and this directory was deleted. But the inode of 'pathb' can't be evicted, because the refcount of the inode was 1. Step 5: The process A keep running, and call the function reconnect_path(in exportfs_decode_fh), which call function ocfs2_get_parent of ocfs2. Get the block number of parent directory(patha) by the name of ... Then read the data from disk by the block number. But this inode has been deleted, so the system panic. Process A Process B 1. in nfsd3_proc_getacl | 2. | dput 3. fh_to_dentry(ocfs2_get_dentry) | 4. bdi flush dirty cache | 5. ocfs2_iget | [283465.542049] OCFS2: ERROR (device sdp): ocfs2_validate_inode_block: Invalid dinode #580640: OCFS2_VALID_FL not set [283465.545490] Kernel panic - not syncing: OCFS2: (device sdp): panic forced after error [283465.546889] CPU: 5 PID: 12416 Comm: nfsd Tainted: G W 4.1.12-124.18.6.el6uek.bug28762940v3.x86_64 #2 [283465.548382] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/21/2015 [283465.549657] 0000000000000000 ffff8800a56fb7b8 ffffffff816e839c ffffffffa0514758 [283465.550392] 000000000008dc20 ffff8800a56fb838 ffffffff816e62d3 0000000000000008 [283465.551056] ffff880000000010 ffff8800a56fb848 ffff8800a56fb7e8 ffff88005df9f000 [283465.551710] Call Trace: [283465.552516] [<ffffffff816e839c>] dump_stack+0x63/0x81 [283465.553291] [<ffffffff816e62d3>] panic+0xcb/0x21b [283465.554037] [<ffffffffa04e66b0>] ocfs2_handle_error+0xf0/0xf0 [ocfs2] [283465.554882] [<ffffffffa04e7737>] __ocfs2_error+0x67/0x70 [ocfs2] [283465.555768] [<ffffffffa049c0f9>] ocfs2_validate_inode_block+0x229/0x230 [ocfs2] [283465.556683] [<ffffffffa047bcbc>] ocfs2_read_blocks+0x46c/0x7b0 [ocfs2] [283465.557408] [<ffffffffa049bed0>] ? ocfs2_inode_cache_io_unlock+0x20/0x20 [ocfs2] [283465.557973] [<ffffffffa049f0eb>] ocfs2_read_inode_block_full+0x3b/0x60 [ocfs2] [283465.558525] [<ffffffffa049f5ba>] ocfs2_iget+0x4aa/0x880 [ocfs2] [283465.559082] [<ffffffffa049146e>] ocfs2_get_parent+0x9e/0x220 [ocfs2] [283465.559622] [<ffffffff81297c05>] reconnect_path+0xb5/0x300 [283465.560156] [<ffffffff81297f46>] exportfs_decode_fh+0xf6/0x2b0 [283465.560708] [<ffffffffa062faf0>] ? nfsd_proc_getattr+0xa0/0xa0 [nfsd] [283465.561262] [<ffffffff810a8196>] ? prepare_creds+0x26/0x110 [283465.561932] [<ffffffffa0630860>] fh_verify+0x350/0x660 [nfsd] [283465.562862] [<ffffffffa0637804>] ? nfsd_cache_lookup+0x44/0x630 [nfsd] [283465.563697] [<ffffffffa063a8b9>] nfsd3_proc_getattr+0x69/0xf0 [nfsd] [283465.564510] [<ffffffffa062cf60>] nfsd_dispatch+0xe0/0x290 [nfsd] [283465.565358] [<ffffffffa05eb892>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc] [283465.566272] [<ffffffffa05ea652>] svc_process_common+0x412/0x6a0 [sunrpc] [283465.567155] [<ffffffffa05eaa03>] svc_process+0x123/0x210 [sunrpc] [283465.568020] [<ffffffffa062c90f>] nfsd+0xff/0x170 [nfsd] [283465.568962] [<ffffffffa062c810>] ? nfsd_destroy+0x80/0x80 [nfsd] [283465.570112] [<ffffffff810a622b>] kthread+0xcb/0xf0 [283465.571099] [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180 [283465.572114] [<ffffffff816f11b8>] ret_from_fork+0x58/0x90 [283465.573156] [<ffffffff810a6160>] ? kthread_create_on_node+0x180/0x180 Link: http://lkml.kernel.org/r/1554185919-3010-1-git-send-email-sunny.s.zhang@oracle.comSigned-off-by:
Shuning Zhang <sunny.s.zhang@oracle.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: piaojun <piaojun@huawei.com> Cc: "Gang He" <ghe@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mike Kravetz authored
commit 1b426bac upstream. hugetlb uses a fault mutex hash table to prevent page faults of the same pages concurrently. The key for shared and private mappings is different. Shared keys off address_space and file index. Private keys off mm and virtual address. Consider a private mappings of a populated hugetlbfs file. A fault will map the page from the file and if needed do a COW to map a writable page. Hugetlbfs hole punch uses the fault mutex to prevent mappings of file pages. It uses the address_space file index key. However, private mappings will use a different key and could race with this code to map the file page. This causes problems (BUG) for the page cache remove code as it expects the page to be unmapped. A sample stack is: page dumped because: VM_BUG_ON_PAGE(page_mapped(page)) kernel BUG at mm/filemap.c:169! ... RIP: 0010:unaccount_page_cache_page+0x1b8/0x200 ... Call Trace: __delete_from_page_cache+0x39/0x220 delete_from_page_cache+0x45/0x70 remove_inode_hugepages+0x13c/0x380 ? __add_to_page_cache_locked+0x162/0x380 hugetlbfs_fallocate+0x403/0x540 ? _cond_resched+0x15/0x30 ? __inode_security_revalidate+0x5d/0x70 ? selinux_file_permission+0x100/0x130 vfs_fallocate+0x13f/0x270 ksys_fallocate+0x3c/0x80 __x64_sys_fallocate+0x1a/0x20 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 There seems to be another potential COW issue/race with this approach of different private and shared keys as noted in commit 8382d914 ("mm, hugetlb: improve page-fault scalability"). Since every hugetlb mapping (even anon and private) is actually a file mapping, just use the address_space index key for all mappings. This results in potentially more hash collisions. However, this should not be the common case. Link: http://lkml.kernel.org/r/20190328234704.27083-3-mike.kravetz@oracle.com Link: http://lkml.kernel.org/r/20190412165235.t4sscoujczfhuiyt@linux-r8p5 Fixes: b5cec28d ("hugetlbfs: truncate_hugepages() takes a range of pages") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kai Shen authored
commit 2bf753e6 upstream. spinlock recursion happened when do LTP test: #!/bin/bash ./runltp -p -f hugetlb & ./runltp -p -f hugetlb & ./runltp -p -f hugetlb & ./runltp -p -f hugetlb & ./runltp -p -f hugetlb & The dtor returned by get_compound_page_dtor in __put_compound_page may be the function of free_huge_page which will lock the hugetlb_lock, so don't put_page in lock of hugetlb_lock. BUG: spinlock recursion on CPU#0, hugemmap05/1079 lock: hugetlb_lock+0x0/0x18, .magic: dead4ead, .owner: hugemmap05/1079, .owner_cpu: 0 Call trace: dump_backtrace+0x0/0x198 show_stack+0x24/0x30 dump_stack+0xa4/0xcc spin_dump+0x84/0xa8 do_raw_spin_lock+0xd0/0x108 _raw_spin_lock+0x20/0x30 free_huge_page+0x9c/0x260 __put_compound_page+0x44/0x50 __put_page+0x2c/0x60 alloc_surplus_huge_page.constprop.19+0xf0/0x140 hugetlb_acct_memory+0x104/0x378 hugetlb_reserve_pages+0xe0/0x250 hugetlbfs_file_mmap+0xc0/0x140 mmap_region+0x3e8/0x5b0 do_mmap+0x280/0x460 vm_mmap_pgoff+0xf4/0x128 ksys_mmap_pgoff+0xb4/0x258 __arm64_sys_mmap+0x34/0x48 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc Link: http://lkml.kernel.org/r/b8ade452-2d6b-0372-32c2-703644032b47@huawei.com Fixes: 9980d744 ("mm, hugetlb: get rid of surplus page accounting tricks") Signed-off-by:
Kai Shen <shenkai8@huawei.com> Signed-off-by:
Feilong Lin <linfeilong@huawei.com> Reported-by:
Wang Wang <wangwang2@huawei.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Reviewed-by:
Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dan Williams authored
commit fce86ff5 upstream. Starting with c6f3c5ee ("mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()") vmf_insert_pfn_pmd() internally calls pmdp_set_access_flags(). That helper enforces a pmd aligned @address argument via VM_BUG_ON() assertion. Update the implementation to take a 'struct vm_fault' argument directly and apply the address alignment fixup internally to fix crash signatures like: kernel BUG at arch/x86/mm/pgtable.c:515! invalid opcode: 0000 [#1] SMP NOPTI CPU: 51 PID: 43713 Comm: java Tainted: G OE 4.19.35 #1 [..] RIP: 0010:pmdp_set_access_flags+0x48/0x50 [..] Call Trace: vmf_insert_pfn_pmd+0x198/0x350 dax_iomap_fault+0xe82/0x1190 ext4_dax_huge_fault+0x103/0x1f0 ? __switch_to_asm+0x40/0x70 __handle_mm_fault+0x3f6/0x1370 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 handle_mm_fault+0xda/0x200 __do_page_fault+0x249/0x4f0 do_page_fault+0x32/0x110 ? page_fault+0x8/0x30 page_fault+0x1e/0x30 Link: http://lkml.kernel.org/r/155741946350.372037.11148198430068238140.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: c6f3c5ee ("mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Piotr Balcer <piotr.balcer@intel.com> Tested-by:
Yan Ma <yan.ma@intel.com> Tested-by:
Pankaj Gupta <pagupta@redhat.com> Reviewed-by:
Matthew Wilcox <willy@infradead.org> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Chandan Rajendra <chandan@linux.ibm.com> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jiri Kosina authored
commit 134fca90 upstream. The semantics of what mincore() considers to be resident is not completely clear, but Linux has always (since 2.3.52, which is when mincore() was initially done) treated it as "page is available in page cache". That's potentially a problem, as that [in]directly exposes meta-information about pagecache / memory mapping state even about memory not strictly belonging to the process executing the syscall, opening possibilities for sidechannel attacks. Change the semantics of mincore() so that it only reveals pagecache information for non-anonymous mappings that belog to files that the calling process could (if it tried to) successfully open for writing; otherwise we'd be including shared non-exclusive mappings, which - is the sidechannel - is not the usecase for mincore(), as that's primarily used for data, not (shared) text [jkosina@suse.cz: v2] Link: http://lkml.kernel.org/r/20190312141708.6652-2-vbabka@suse.cz [mhocko@suse.com: restructure can_do_mincore() conditions] Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1903062342020.19912@cbobk.fhfr.pmSigned-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Josh Snyder <joshs@netflix.com> Acked-by:
Dominique Martinet <asmadeus@codewreck.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Chinner <david@fromorbit.com> Cc: Kevin Easton <kevin@guarana.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Cyril Hrubis <chrubis@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Daniel Gruss <daniel@gruss.cc> Signed-off-by:
-
Ofir Drang authored
commit 7138377c upstream. in order to support cryptocell tee fips error that may occurs while cryptocell ree is suspended, an cc_tee_handle_fips_error call added to the cc_pm_resume function. Signed-off-by:
Ofir Drang <ofir.drang@arm.com> Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ofir Drang authored
commit 897ab231 upstream. Adds function that checks if cryptocell tee fips error occurred and in such case triggers system error through kernel panic. Change fips function to use this new routine. Signed-off-by:
-
Ofir Drang authored
commit 3499efbe upstream. During power management suspend the driver need to prepare the device for the power down operation and as a last indication write to the HOST_POWER_DOWN_EN register which signals to the hardware that The ccree is ready for power down. Signed-off-by:
-
Ofir Drang authored
commit 7766dd77 upstream. On power management resume function first enable the device clk source to allow access to the device registers. Signed-off-by:
-
Gilad Ben-Yossef authored
commit e8662a6a upstream. The AEAD authenc key and IVs might be passed to us on stack. Copy it to a slab buffer before mapping to gurantee proper DMA mapping. Signed-off-by:
-
Gilad Ben-Yossef authored
commit f3df82b4 upstream. We were computing the size of the import buffer based on the digest size but the 318 and 224 byte variants use 512 and 256 bytes internal state sizes respectfully, thus causing the import buffer to overrun. Fix it by using the right sizes. Signed-off-by:
-
Gilad Ben-Yossef authored
commit 874e1637 upstream. The MAC hash key might be passed to us on stack. Copy it to a slab buffer before mapping to gurantee proper DMA mapping. Signed-off-by:
-
Gilad Ben-Yossef authored
commit d574b707 upstream. Fix a memory leak on the error path of IV generation code. Signed-off-by:
-
Gilad Ben-Yossef authored
commit c4b22bf5 upstream. We were handling chained scattergather lists with specialized code needlessly as the regular sg APIs handle them just fine. The code handling this also had an (unused) code path with a use-before-init error, flagged by Coverity. Remove all special handling of chained sg and leave their handling to the regular sg APIs. Signed-off-by:
-
Daniel Borkmann authored
commit af959b18 upstream. systemtap folks reported the following splat recently: [ 7790.862212] WARNING: CPU: 3 PID: 26759 at arch/x86/kernel/kprobes/core.c:1022 kprobe_fault_handler+0xec/0xf0 [...] [ 7790.864113] CPU: 3 PID: 26759 Comm: sshd Not tainted 5.1.0-0.rc7.git1.1.fc31.x86_64 #1 [ 7790.864198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS[...] [ 7790.864314] RIP: 0010:kprobe_fault_handler+0xec/0xf0 [ 7790.864375] Code: 48 8b 50 [...] [ 7790.864714] RSP: 0018:ffffc06800bdbb48 EFLAGS: 00010082 [ 7790.864812] RAX: ffff9e2b75a16320 RBX: 0000000000000000 RCX: 0000000000000000 [ 7790.865306] RDX: ffffffffffffffff RSI: 000000000000000e RDI: ffffc06800bdbbf8 [ 7790.865514] RBP: ffffc06800bdbbf8 R08: 0000000000000000 R09: 0000000000000000 [ 7790.865960] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc06800bdbbf8 [ 7790.866037] R13: ffff9e2ab56a0418 R14: ffff9e2b6d0bb400 R15: ffff9e2b6d268000 [ 7790.866114] FS: 00007fde49937d80(0000) GS:ffff9e2b75a00000(0000) knlGS:0000000000000000 [ 7790.866193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7790.866318] CR2: 0000000000000000 CR3: 000000012f312000 CR4: 00000000000006e0 [ 7790.866419] Call Trace: [ 7790.866677] do_user_addr_fault+0x64/0x480 [ 7790.867513] do_page_fault+0x33/0x210 [ 7790.868002] async_page_fault+0x1e/0x30 [ 7790.868071] RIP: 0010: (null) [ 7790.868144] Code: Bad RIP value. [ 7790.868229] RSP: 0018:ffffc06800bdbca8 EFLAGS: 00010282 [ 7790.868362] RAX: ffff9e2b598b60f8 RBX: ffffc06800bdbe48 RCX: 0000000000000004 [ 7790.868629] RDX: 0000000000000004 RSI: ffffc06800bdbc6c RDI: ffff9e2b598b60f0 [ 7790.868834] RBP: ffffc06800bdbcf8 R08: 0000000000000000 R09: 0000000000000004 [ 7790.870432] R10: 00000000ff6f7a03 R11: 0000000000000000 R12: 0000000000000001 [ 7790.871859] R13: ffffc06800bdbcb8 R14: 0000000000000000 R15: ffff9e2acd0a5310 [ 7790.873455] ? vfs_read+0x5/0x170 [ 7790.874639] ? vfs_read+0x1/0x170 [ 7790.875834] ? trace_call_bpf+0xf6/0x260 [ 7790.877044] ? vfs_read+0x1/0x170 [ 7790.878208] ? vfs_read+0x5/0x170 [ 7790.879345] ? kprobe_perf_func+0x233/0x260 [ 7790.880503] ? vfs_read+0x1/0x170 [ 7790.881632] ? vfs_read+0x5/0x170 [ 7790.882751] ? kprobe_ftrace_handler+0x92/0xf0 [ 7790.883926] ? __vfs_read+0x30/0x30 [ 7790.885050] ? ftrace_ops_assist_func+0x94/0x100 [ 7790.886183] ? vfs_read+0x1/0x170 [ 7790.887283] ? vfs_read+0x5/0x170 [ 7790.888348] ? ksys_read+0x5a/0xe0 [ 7790.889389] ? do_syscall_64+0x5c/0xa0 [ 7790.890401] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some debugging, turns out that the logic in 2cbd95a5 ("bpf: change parameters of call/branch offset adjustment") has a bug that is exposed after 52875a04 ("bpf: verifier: remove dead code") in that we miss some of the jump offset adjustments after code patching when we remove dead code, more concretely, upon backward jump spanning over the area that is being removed. BPF insns of a case that was hit pre 52875a04: [...] 676: (85) call bpf_perf_event_output#-47616 677: (05) goto pc-636 678: (62) *(u32 *)(r10 -64) = 0 679: (bf) r7 = r10 680: (07) r7 += -64 681: (05) goto pc-44 682: (05) goto pc-1 683: (05) goto pc-1 BPF insns afterwards: [...] 618: (85) call bpf_perf_event_output#-47616 619: (05) goto pc-638 620: (62) *(u32 *)(r10 -64) = 0 621: (bf) r7 = r10 622: (07) r7 += -64 623: (05) goto pc-44 To illustrate the bug, situation looks as follows: ____ 0 | | <-- foo: [...] 1 |____| 2 |____| <-- pos / end_new ^ 3 | | | 4 | | | len 5 |____| | (remove region) 6 | | <-- end_old v 7 | | 8 | | <-- curr (jmp foo) 9 |____| The condition curr >= end_new && curr + off + 1 < end_new in the branch delta adjustments is never hit because curr + off + 1 < end_new is compared as unsigned and therefore curr + off + 1 > end_new in unsigned realm as curr + off + 1 becomes negative since the insns are memmove()'d before the offset adjustments. Correct BPF insns after this fix: [...] 618: (85) call bpf_perf_event_output#-47216 619: (05) goto pc-578 620: (62) *(u32 *)(r10 -64) = 0 621: (bf) r7 = r10 622: (07) r7 += -64 623: (05) goto pc-44 Note that unprivileged case is not affected from this. Fixes: 52875a04 ("bpf: verifier: remove dead code") Fixes: 2cbd95a5 ("bpf: change parameters of call/branch offset adjustment") Reported-by:
Frank Ch. Eigler <fche@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
commit 8968c67a upstream. Prefetch-with-intent-to-write is currently part of the XADD mapping in the AArch64 JIT and follows the kernel's implementation of atomic_add. This may interfere with other threads executing the LDXR/STXR loop, leading to potential starvation and fairness issues. Drop the optional prefetch instruction. Fixes: 85f68fe8 ("bpf, arm64: implement jiting of BPF_XADD") Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Acked-by:
-
Libin Yang authored
commit 01c83276 upstream. In resume from S3, HDAC HDMI codec driver dapm event callback may be operated before HDMI codec driver turns on the display audio power domain because of the contest between display driver and hdmi codec driver. This patch adds the device_link between soc card device (consumer) and hdmi codec device (supplier) to make sure the sequence is always correct. Signed-off-by:
Libin Yang <libin.yang@intel.com> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
S.j. Wang authored
commit 903c220b upstream. case ESAI_HCKT_EXTAL and case ESAI_HCKR_EXTAL should be independent of each other, so replace fall-through with break. Fixes: 43d24e76 ("ASoC: fsl_esai: Add ESAI CPU DAI driver") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Curtis Malainey authored
commit a46eb523 upstream. The current algorithm allows 3 types of transfers, 16bit, 32bit and burst. According to Realtek, 16bit transfers have a special restriction in that it is restricted to the memory region of 0x18020000 ~ 0x18021000. This region is the memory location of the I2C registers. The current algorithm does not uphold this restriction and therefore fails to complete writes. Since this has been broken for some time it likely no one is using it. Better to simply disable the 16 bit writes. This will allow users to properly load firmware over SPI without data corruption. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Reviewed-by:
Ben Zhang <benzh@chromium.org> Signed-off-by:
-
Jon Hunter authored
commit ecb2795c upstream. The max98090 driver defines 3 DAPM muxes; one for the right line output (LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux) and one for the right headphone mixer source (MIXHPRSEL Mux). The same bit is used for the mux as well as the DAPM enable, and although the mux can be correctly configured, after playback has completed, the mux will be reset during the disable phase. This is preventing the state of these muxes from being saved and restored correctly on system reboot. Fix this by marking these muxes as SND_SOC_NOPM. Note this has been verified this on the Tegra124 Nyan Big which features the MAX98090 codec. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
Jeremy Soller authored
commit 80a5052d upstream. On the System76 Gazelle (gaze14), there is a headset microphone input attached to 0x1a that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is identical to the patch already applied for the System76 Darter Pro (darp5). Signed-off-by:
Jeremy Soller <jeremy@system76.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kailang Yang authored
commit 607ca3bd upstream. Let EAPD turn on after set pin output. [ NOTE: This change is supposed to reduce the possible click noises at (runtime) PM resume. The functionality should be same (i.e. the verbs are executed correctly) no matter which order is, so this should be safe to apply for all codecs -- tiwai ] Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
commit 7f641e26 upstream. On the machines with AMD GPU or Nvidia GPU, we often meet this issue: after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting even there is no any monitors plugged. When this problem happens, we check the /proc/asound/cardX/eld#N.M, we will find the monitor_present=1, eld_valid=0. The root cause is BIOS or GPU driver makes the PRESENCE valid even no monitor plugged, and of course the driver will not get the valid eld_data subsequently. In this situation, we should not report the jack_plugged event, to do so, let us change the function hdmi_present_sense_via_verbs(). In this function, it reads the pin_sense via snd_hda_pin_sense(), after calling this function, the jack_dirty is 0, and before exiting via_verbs(), we change the shadow pin_sense according to both monitor_present and eld_valid, then in the snd_hda_jack_report_sync(), since the jack_dirty is still 0, it will report jack event according to this modified shadow pin_sense. After this change, the driver will not report Jack_is_plugged event through hdmi_present_sense_via_verbs() if monitor_present is 1 and eld_valid is 0. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Hui Wang authored
commit 8c2e6728 upstream. The driver will check the monitor presence when resuming from suspend, starting poll or interrupt triggers. In these 3 situations, the jack_dirty will be set to 1 first, then the hda_jack.c reads the pin_sense from register, after reading the register, the jack_dirty will be set to 0. But hdmi_repoll_work() is enabled in these 3 situations, It will read the pin_sense a couple of times subsequently, since the jack_dirty is 0 now, It does not read the register anymore, instead it uses the shadow pin_sense which is read at the first time. It is meaningless to check the shadow pin_sense a couple of times, we need to read the register to check the real plugging state, so we set the jack_dirty to 1 in the hdmi_repoll_work(). Signed-off-by:
-
Wenwen Wang authored
commit cb517359 upstream. In parse_audio_selector_unit(), the string array 'namelist' is allocated through kmalloc_array(), and each string pointer in this array, i.e., 'namelist[]', is allocated through kmalloc() in the following for loop. Then, a control instance 'kctl' is created by invoking snd_ctl_new1(). If an error occurs during the creation process, the string array 'namelist', including all string pointers in the array 'namelist[]', should be freed, before the error code ENOMEM is returned. However, the current code does not free 'namelist[]', resulting in memory leaks. To fix the above issue, free all string pointers 'namelist[]' in a loop. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
