- 02 Sep, 2024 40 commits
-
-
Kirill A. Shutemov authored
Patch series "mm: Fix several issues with unaccepted memory", v2. The patchset addresses several issues related to unaccepted memory. Pacth 1/7 preparatory cleanup. Patch 2/7 ensures that __alloc_pages_bulk() will not exhaust all accepted memory without accepting more. Patches 3/7-5/7 are preparations for patch 6/7, which fixes alloc_config_page() on machines with unaccepted memory. This allows, for example, the allocation of gigantic pages at runtime. Patch 7/7 enables the kernel to accept memory up to the promo watermark. This patch (of 7): Add dummy _deferred_grow_zone() for !DEFERRED_STRUCT_PAGE_INIT and remove #ifdefs in two places. No functional changes. Link: https://lkml.kernel.org/r/20240809114854.3745464-1-kirill.shutemov@linux.intel.com Link: https://lkml.kernel.org/r/20240809114854.3745464-3-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Suggested-by: David Hildenbrand <david@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Zi Yan authored
do_numa_page() and do_huge_pmd_numa_page() share a lot of common code. To reduce redundancy, move common code to numa_migrate_prep() and rename the function to numa_migrate_check() to reflect its functionality. Now do_huge_pmd_numa_page() also checks shared folios to set TNF_SHARED flag. Link: https://lkml.kernel.org/r/20240809145906.1513458-4-ziy@nvidia.comSigned-off-by: Zi Yan <ziy@nvidia.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Shakeel Butt authored
At the moment memcg IDs are managed through IDR which requires external synchronization mechanisms and makes the allocation code a bit awkward. Let's switch to xarray and make the code simpler. [shakeel.butt@linux.dev: fix error path in mem_cgroup_alloc(), per Dan] Link: https://lkml.kernel.org/r/20240815155402.3630804-1-shakeel.butt@linux.dev Link: https://lkml.kernel.org/r/20240809172618.2946790-1-shakeel.butt@linux.devSigned-off-by: Shakeel Butt <shakeel.butt@linux.dev> Suggested-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Muchun Song <muchun.song@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Jeff Xu authored
the syscall remap accepts following: mremap(src, size, size, MREMAP_MAYMOVE | MREMAP_DONTUNMAP, dst) when the src is sealed, the call will fail with error code: EPERM Previously, the test uses hard-coded 0xdeaddead as dst, and it will fail on the system with newer glibc installed. This patch removes test's dependency on glibc for mremap(), also fix the test and remove the hardcoded address. Link: https://lkml.kernel.org/r/20240807212320.2831848-1-jeffxu@chromium.org Fixes: 4926c7a5 ("selftest mm/mseal memory sealing") Signed-off-by: Jeff Xu <jeffxu@chromium.org> Reported-by: Pedro Falcato <pedro.falcato@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Matthew Wilcox (Oracle) authored
The unuse_pte_range() caller only wants the folio while do_swap_page() wants both the page and the folio. Since do_swap_page() already has logic for handling both the folio and the page, move the folio-to-page logic there. This also lets us allocate larger folios in the SWP_SYNCHRONOUS_IO path in future. Link: https://lkml.kernel.org/r/20240807193734.1865400-1-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Matthew Wilcox (Oracle) authored
The PG_error bit is now unused; delete it and free up a bit in page->flags. Link: https://lkml.kernel.org/r/20240807193528.1865100-2-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Matthew Wilcox (Oracle) authored
Nobody checks the folio error flag any more, so we can stop setting and clearing it. Also remove the documentation suggesting to not bother setting the error bit. Link: https://lkml.kernel.org/r/20240807193528.1865100-1-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
qiwu.chen authored
Print the elapsed time for the allocated or freed track, which can be useful in some debugging scenarios. Link: https://lkml.kernel.org/r/20240807025627.37419-1-qiwu.chen@transsion.comSigned-off-by: qiwu.chen <qiwu.chen@transsion.com> Reviewed-by: Marco Elver <elver@google.com> Cc: chenqiwu <qiwu.chen@transsion.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Jianhui Zhou authored
pcpu_alloc_size() was added in 7ac5c53e "mm/percpu.c: introduce pcpu_alloc_size()", which is used to get the allocated memory size in bpf. However, pcpu_alloc_size() is no longer used in "bpf: Use c->unit_size to select target cache during free" because its actuall allocated memory size may change at runtime due to its slab merging mechanism. Therefore, pcpu_alloc_size() can be removed. Link: https://lkml.kernel.org/r/tencent_AD5C50E8D78C07A3CE539BD5F6BF39706507@qq.comSigned-off-by: Jianhui Zhou <912460177@qq.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: JonasZhou <JonasZhou@zhaoxin.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
It is not immediately obvious, but we can move the folio->_nr_pages_mapped update out of the loop and reduce the number of atomic ops without affecting the stats. The important point to realize is that only removing the last PMD mapping will result in _nr_pages_mapped going below ENTIRELY_MAPPED, not the individual atomic_inc_return_relaxed() calls. Concurrent races with removal of PMD mappings should be handled as expected, just like when we would have such races right now on a single mapcount update. In a simple munmap() microbenchmark [1] on 1 GiB of memory backed by the same PTE-mapped folio size (only mapped by a single process such that they will get completely unmapped), this change results in a speedup (positive is good) per folio size on a x86-64 Intel machine of roughly (a bit of noise expected): * 16 KiB: +10% * 32 KiB: +15% * 64 KiB: +17% * 128 KiB: +21% * 256 KiB: +22% * 512 KiB: +22% * 1024 KiB: +23% * 2048 KiB: +27% [1] https://gitlab.com/davidhildenbrand/scratchspace/-/blob/main/pte-mapped-folio-benchmarks.c Link: https://lkml.kernel.org/r/20240807115515.1640951-1-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Pedro Falcato authored
Add an mseal test for madvise() operations that aren't considered "discard" (e.g purely advisory ops such as MADV_RANDOM). [pedro.falcato@gmail.com: adjust the mseal test's plan] Link: https://lkml.kernel.org/r/20240807203724.2686144-1-pedro.falcato@gmail.com Link: https://lkml.kernel.org/r/20240807173336.2523757-3-pedro.falcato@gmail.comSigned-off-by: Pedro Falcato <pedro.falcato@gmail.com> Tested-by: Jeff Xu <jeffxu@chromium.org> Reviewed-by: Jeff Xu <jeffxu@chromium.org> Cc: Kees Cook <kees@kernel.org> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Marco Elver authored
Introduce burst mode, which can be configured with kfence.burst=$count, where the burst count denotes the additional successive slab allocations to be allocated through KFENCE for each sample interval. The idea is that this can give developers an additional knob to make KFENCE more aggressive when debugging specific issues of systems where either rebooting or recompiling the kernel with KASAN is not possible. Experiment: To assess the effectiveness of the new option, we randomly picked a recent out-of-bounds [1] and use-after-free bug [2], each with a reproducer provided by syzbot, that initially detected these bugs with KASAN. We then tried to reproduce the bugs with KFENCE below. [1] Fixed by: 7c55b788 ("jfs: xattr: fix buffer overflow for invalid xattr") https://syzkaller.appspot.com/bug?id=9d1b59d4718239da6f6069d3891863c25f9f24a2 [2] Fixed by: f8ad00f3 ("l2tp: fix possible UAF when cleaning up tunnels") https://syzkaller.appspot.com/bug?id=4f34adc84f4a3b080187c390eeef60611fd450e1 The following KFENCE configs were compared. A pool size of 1023 objects was used for all configurations. Baseline kfence.sample_interval=100 kfence.skip_covered_thresh=75 kfence.burst=0 Aggressive kfence.sample_interval=1 kfence.skip_covered_thresh=10 kfence.burst=0 AggressiveBurst kfence.sample_interval=1 kfence.skip_covered_thresh=10 kfence.burst=1000 Each reproducer was run 10 times (after a fresh reboot), with the following detection counts for each KFENCE config: | Detection Count out of 10 | | OOB [1] | UAF [2] | ------------------+-------------+-------------+ Default | 0/10 | 0/10 | Aggressive | 0/10 | 0/10 | AggressiveBurst | 8/10 | 8/10 | With the Default and even the Aggressive configs the results are unsurprising, given KFENCE has not been designed for deterministic bug detection of small test cases. However, when enabling burst mode with relatively large burst count, KFENCE can start to detect heap memory-safety bugs even in simpler test cases with high probability (in the above cases with ~80% probability). Link: https://lkml.kernel.org/r/20240805124203.2692278-1-elver@google.comSigned-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Jann Horn authored
There is a (harmless) type confusion in lock_vma_under_rcu(): After vma_start_read(), we have taken the VMA lock but don't know yet whether the VMA has already been detached and scheduled for RCU freeing. At this point, ->vm_start and ->vm_end are accessed. vm_area_struct contains a union such that ->vm_rcu uses the same memory as ->vm_start and ->vm_end; so accessing ->vm_start and ->vm_end of a detached VMA is illegal and leads to type confusion between union members. Fix it by reordering the vma->detached check above the address checks, and document the rules for RCU readers accessing VMAs. This will probably change the number of observed VMA_LOCK_MISS events (since previously, trying to access a detached VMA whose ->vm_rcu has been scheduled would bail out when checking the fault address against the rcu_head members reinterpreted as VMA bounds). Link: https://lkml.kernel.org/r/20240805-fix-vma-lock-type-confusion-v1-1-9f25443a9a71@google.com Fixes: 50ee3253 ("mm: introduce lock_vma_under_rcu to be used from arch-specific code") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Suren Baghdasaryan <surenb@google.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Nhat Pham authored
Currently, there are a couple of issues with our disk swapin tracking for dynamic zswap shrinker heuristics: 1. We only increment the swapin counter on pivot pages. This means we are not taking into account pages that also need to be swapped in, but are already taken care of as part of the readahead window. 2. We are also incrementing when the pages are read from the zswap pool, which is inaccurate. This patch rectifies these issues by incrementing the counter whenever we need to perform a non-zswap read. Note that we are slightly overcounting, as a page might be read into memory by the readahead algorithm even though it will not be neeeded by users - however, this is an acceptable inaccuracy, as the readahead logic itself will adapt to these kind of scenarios. To test this change, I built the kernel under a cgroup with its memory.max set to 2 GB: real: 236.66s user: 4286.06s sys: 652.86s swapins: 81552 For comparison, with just the new second chance algorithm, the build time is as follows: real: 244.85s user: 4327.22s sys: 664.39s swapins: 94663 Without neither: real: 263.89s user: 4318.11s sys: 673.29s swapins: 227300.5 (average over 5 runs) With this change, the kernel CPU time reduces by a further 1.7%, and the real time is reduced by another 3.3%, compared to just the second chance algorithm by itself. The swapins count also reduces by another 13.85%. Combinng the two changes, we reduce the real time by 10.32%, kernel CPU time by 3%, and number of swapins by 64.12%. To gauge the new scheme's ability to offload cold data, I ran another benchmark, in which the kernel was built under a cgroup with memory.max set to 3 GB, but with 0.5 GB worth of cold data allocated before each build (in a shmem file). Under the old scheme: real: 197.18s user: 4365.08s sys: 289.02s zswpwb: 72115.2 Under the new scheme: real: 195.8s user: 4362.25s sys: 290.14s zswpwb: 87277.8 (average over 5 runs) Notice that we actually observe a 21% increase in the number of written back pages - so the new scheme is just as good, if not better at offloading pages from the zswap pool when they are cold. Build time reduces by around 0.7% as a result. [nphamcs@gmail.com: squeeze a comment into a single line] Link: https://lkml.kernel.org/r/20240806004518.3183562-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20240805232243.2896283-3-nphamcs@gmail.com Fixes: b5ba474f ("zswap: shrink zswap pool based on memory pressure") Signed-off-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Takero Funaki <flintglass@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Nhat Pham authored
Patch series "improving dynamic zswap shrinker protection scheme", v3. When experimenting with the memory-pressure based (i.e "dynamic") zswap shrinker in production, we observed a sharp increase in the number of swapins, which led to performance regression. We were able to trace this regression to the following problems with the shrinker's warm pages protection scheme: 1. The protection decays way too rapidly, and the decaying is coupled with zswap stores, leading to anomalous patterns, in which a small batch of zswap stores effectively erase all the protection in place for the warmer pages in the zswap LRU. This observation has also been corroborated upstream by Takero Funaki (in [1]). 2. We inaccurately track the number of swapped in pages, missing the non-pivot pages that are part of the readahead window, while counting the pages that are found in the zswap pool. To alleviate these two issues, this patch series improve the dynamic zswap shrinker in the following manner: 1. Replace the protection size tracking scheme with a second chance algorithm. This new scheme removes the need for haphazard stats decaying, and automatically adjusts the pace of pages aging with memory pressure, and writeback rate with pool activities: slowing down when the pool is dominated with zswpouts, and speeding up when the pool is dominated with stale entries. 2. Fix the tracking of the number of swapins to take into account non-pivot pages in the readahead window. With these two changes in place, in a kernel-building benchmark without any cold data added, the number of swapins is reduced by 64.12%. This translate to a 10.32% reduction in build time. We also observe a 3% reduction in kernel CPU time. In another benchmark, with cold data added (to gauge the new algorithm's ability to offload cold data), the new second chance scheme outperforms the old protection scheme by around 0.7%, and actually written back around 21% more pages to backing swap device. So the new scheme is just as good, if not even better than the old scheme on this front as well. [1]: https://lore.kernel.org/linux-mm/CAPpodddcGsK=0Xczfuk8usgZ47xeyf4ZjiofdT+ujiyz6V2pFQ@mail.gmail.com/ This patch (of 2): Current zswap shrinker's heuristics to prevent overshrinking is brittle and inaccurate, specifically in the way we decay the protection size (i.e making pages in the zswap LRU eligible for reclaim). We currently decay protection aggressively in zswap_lru_add() calls. This leads to the following unfortunate effect: when a new batch of pages enter zswap, the protection size rapidly decays to below 25% of the zswap LRU size, which is way too low. We have observed this effect in production, when experimenting with the zswap shrinker: the rate of shrinking shoots up massively right after a new batch of zswap stores. This is somewhat the opposite of what we want originally - when new pages enter zswap, we want to protect both these new pages AND the pages that are already protected in the zswap LRU. Replace existing heuristics with a second chance algorithm 1. When a new zswap entry is stored in the zswap pool, its referenced bit is set. 2. When the zswap shrinker encounters a zswap entry with the referenced bit set, give it a second chance - only flips the referenced bit and rotate it in the LRU. 3. If the shrinker encounters the entry again, this time with its referenced bit unset, then it can reclaim the entry. In this manner, the aging of the pages in the zswap LRUs are decoupled from zswap stores, and picks up the pace with increasing memory pressure (which is what we want). The second chance scheme allows us to modulate the writeback rate based on recent pool activities. Entries that recently entered the pool will be protected, so if the pool is dominated by such entries the writeback rate will reduce proportionally, protecting the workload's workingset.On the other hand, stale entries will be written back quickly, which increases the effective writeback rate. The referenced bit is added at the hole after the `length` field of struct zswap_entry, so there is no extra space overhead for this algorithm. We will still maintain the count of swapins, which is consumed and subtracted from the lru size in zswap_shrinker_count(), to further penalize past overshrinking that led to disk swapins. The idea is that had we considered this many more pages in the LRU active/protected, they would not have been written back and we would not have had to swapped them in. To test this new heuristics, I built the kernel under a cgroup with memory.max set to 2G, on a host with 36 cores: With the old shrinker: real: 263.89s user: 4318.11s sys: 673.29s swapins: 227300.5 With the second chance algorithm: real: 244.85s user: 4327.22s sys: 664.39s swapins: 94663 (average over 5 runs) We observe an 1.3% reduction in kernel CPU usage, and around 7.2% reduction in real time. Note that the number of swapped in pages dropped by 58%. [nphamcs@gmail.com: fix a small mistake in the referenced bit documentation] Link: https://lkml.kernel.org/r/20240806003403.3142387-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20240805232243.2896283-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20240805232243.2896283-2-nphamcs@gmail.comSigned-off-by: Nhat Pham <nphamcs@gmail.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Yosry Ahmed <yosryahmed@google.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Takero Funaki <flintglass@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Gow authored
The generic mmap_base code tries to leave a gap between the top of the stack and the mmap base address, but enforces a minimum gap size (MIN_GAP) of 128MB, which is too large on some setups. In particular, on arm tasks without ADDR_LIMIT_32BIT, the STACK_TOP value is less than 128MB, so it's impossible to fit such a gap in. Only enforce this minimum if MIN_GAP < MAX_GAP, as we'd prefer to honour MAX_GAP, which is defined proportionally, so scales better and always leaves us with both _some_ stack space and some room for mmap. This fixes the usercopy KUnit test suite on 32-bit arm, as it doesn't set any personality flags so gets the default (in this case 26-bit) task size. This test can be run with: ./tools/testing/kunit/kunit.py run --arch arm usercopy --make_options LLVM=1 Link: https://lkml.kernel.org/r/20240803074642.1849623-2-davidgow@google.com Fixes: dba79c3d ("arm: use generic mmap top-down layout and brk randomization") Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Kees Cook <kees@kernel.org> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Yang Li authored
The header files linux/bug.h is included twice in vma_internal.h, so one inclusion of each can be removed. Link: https://lkml.kernel.org/r/20240802060216.24591-1-yang.lee@linux.alibaba.comSigned-off-by: Yang Li <yang.lee@linux.alibaba.com> Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9636Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's simplify by reusing folio_walk. Keep the existing behavior by handling migration entries and zeropages. Link: https://lkml.kernel.org/r/20240802155524.517137-12-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
All users are gone, let's remove it and any leftovers in comments. We'll leave any FOLL/follow_page_() naming cleanups as future work. Link: https://lkml.kernel.org/r/20240802155524.517137-11-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's get rid of another follow_page() user and perform the conversion under PTL: Note that this is also what follow_page_pte() ends up doing. Unfortunately we cannot currently optimize out the additional reference, because arch_make_folio_accessible() must be called with a raised refcount to protect against concurrent conversion to secure. We can just move the arch_make_folio_accessible() under the PTL, like follow_page_pte() would. We'll effectively drop the "writable" check implied by FOLL_WRITE: follow_page_pte() would also not check that when calling arch_make_folio_accessible(), so there is no good reason for doing that here. We'll lose the secretmem check from follow_page() as well, about which we shouldn't really care. Link: https://lkml.kernel.org/r/20240802155524.517137-10-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's get rid of another follow_page() user and perform the UV calls under PTL -- which likely should be fine. No need for an additional reference while holding the PTL: uv_destroy_folio() and uv_convert_from_secure_folio() raise the refcount, so any concurrent make_folio_secure() would see an unexpted reference and cannot set PG_arch_1 concurrently. Do we really need a writable PTE? Likely yes, because the "destroy" part is, in comparison to the export, a destructive operation. So we'll keep the writability check for now. We'll lose the secretmem check from follow_page(). Likely we don't care about that here. Link: https://lkml.kernel.org/r/20240802155524.517137-9-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's remove yet another follow_page() user. Note that we have to do the split without holding the PTL, after folio_walk_end(). We don't care about losing the secretmem check in follow_page(). [david@redhat.com: teach can_split_folio() that we are not holding an additional reference] Link: https://lkml.kernel.org/r/c75d1c6c-8ea6-424f-853c-1ccda6c77ba2@redhat.com Link: https://lkml.kernel.org/r/20240802155524.517137-8-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's use folio_walk instead, for example avoiding taking temporary folio references if the folio does obviously not even apply and getting rid of one more follow_page() user. We cannot move all handling under the PTL, so leave the rmap handling (which implies an allocation) out. Note that zeropages obviously don't apply: old code could just have specified FOLL_DUMP. Further, we don't care about losing the secretmem check in follow_page(): these are never anon pages and vma_ksm_compatible() would never consider secretmem vmas (VM_SHARED | VM_MAYSHARE must be set for secretmem, see secretmem_mmap()). Link: https://lkml.kernel.org/r/20240802155524.517137-7-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's use folio_walk instead, for example avoiding taking temporary folio references if the folio does not even apply and getting rid of one more follow_page() user. Note that zeropages obviously don't apply: old code could just have specified FOLL_DUMP. Anon folios are never secretmem, so we don't care about losing the check in follow_page(). Link: https://lkml.kernel.org/r/20240802155524.517137-6-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's use folio_walk instead, so we can avoid taking a folio reference when we won't even be trying to migrate the folio and to get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. We now perform the folio_likely_mapped_shared() check under PTL, which is what we want: relying on the mapcount and friends after dropping the PTL does not make too much sense, as the page can get unmapped concurrently from this process. Further, we perform the folio isolation under PTL, similar to how we handle it for MADV_PAGEOUT. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). The other errros are left as is, and match the documentation in the man page. While at it, rename add_page_for_migration() to add_folio_for_migration(). We'll lose the "secretmem" check, but that shouldn't really matter because these folios cannot ever be migrated. Should vma_migratable() refuse these VMAs? Maybe. Link: https://lkml.kernel.org/r/20240802155524.517137-5-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's use folio_walk instead, so we can avoid taking a folio reference just to read the nid and get rid of another follow_page()/FOLL_DUMP user. Use FW_ZEROPAGE so we can return "-EFAULT" for it as documented. The possible return values for follow_page() were confusing, especially with FOLL_DUMP set. We'll handle it like documented in the man page: * -EFAULT: This is a zero page or the memory area is not mapped by the process. * -ENOENT: The page is not present. We'll keep setting -ENOENT for ZONE_DEVICE. Maybe not the right thing to do, but it likely doesn't really matter (just like for weird devmap, whereby we fake "not present"). Note that the other errors (-EACCESS, -EBUSY, -EIO, -EINVAL, -ENOMEM) so far only applied when actually moving pages, not when only querying stats. We'll effectively drop the "secretmem" check we had in follow_page(), but that shouldn't really matter here, we're not accessing folio/page content after all. Link: https://lkml.kernel.org/r/20240802155524.517137-4-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
We want to get rid of follow_page(), and have a more reasonable way to just lookup a folio mapped at a certain address, perform some checks while still under PTL, and then only conditionally grab a folio reference if really required. Further, we might want to get rid of some walk_page_range*() users that really only want to temporarily lookup a single folio at a single address. So let's add a new page table walker that does exactly that, similarly to GUP also being able to walk hugetlb VMAs. Add folio_walk_end() as a macro for now: the compiler is not easy to please with the pte_unmap()->kunmap_local(). Note that one difference between follow_page() and get_user_pages(1) is that follow_page() will not trigger faults to get something mapped. So folio_walk is at least currently not a replacement for get_user_pages(1), but could likely be extended/reused to achieve something similar in the future. Link: https://lkml.kernel.org/r/20240802155524.517137-3-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Patch series "mm: replace follow_page() by folio_walk". Looking into a way of moving the last folio_likely_mapped_shared() call in add_folio_for_migration() under the PTL, I found myself removing follow_page(). This paves the way for cleaning up all the FOLL_, follow_* terminology to just be called "GUP" nowadays. The new page table walker will lookup a mapped folio and return to the caller with the PTL held, such that the folio cannot get unmapped concurrently. Callers can then conditionally decide whether they really want to take a short-term folio reference or whether the can simply unlock the PTL and be done with it. folio_walk is similar to page_vma_mapped_walk(), except that we don't know the folio we want to walk to and that we are only walking to exactly one PTE/PMD/PUD. folio_walk provides access to the pte/pmd/pud (and the referenced folio page because things like KSM need that), however, as part of this series no page table modifications are performed by users. We might be able to convert some other walk_page_range() users that really only walk to one address, such as DAMON with damon_mkold_ops/damon_young_ops. It might make sense to extend folio_walk in the future to optionally fault in a folio (if applicable), such that we can replace some get_user_pages() users that really only want to lookup a single page/folio under PTL without unconditionally grabbing a folio reference. I have plans to extend the approach to a range walker that will try batching various page table entries (not just folio pages) to be a better replace for walk_page_range() -- and users will be able to opt in which type of page table entries they want to process -- but that will require more work and more thoughts. KSM seems to work just fine (ksm_functional_tests selftests) and move_pages seems to work (migration selftest). I tested the leaf implementation excessively using various hugetlb sizes (64K, 2M, 32M, 1G) on arm64 using move_pages and did some more testing on x86-64. Cross compiled on a bunch of architectures. This patch (of 11): We want to make use of vm_normal_page_pmd() in generic page table walking code where we might walk hugetlb folios that are mapped by PMDs even without CONFIG_TRANSPARENT_HUGEPAGE. So let's expose vm_normal_page_pmd() + vm_normal_folio_pmd() with CONFIG_PGTABLE_HAS_HUGE_LEAVES. Link: https://lkml.kernel.org/r/20240802155524.517137-1-david@redhat.com Link: https://lkml.kernel.org/r/20240802155524.517137-2-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Andrew Morton authored
- we have a helper wmark_pages(). Teach min_wmark_pages(), low_wmark_pages(), high_wmark_pages() and promo_wmark_pages() to use it instead of open-coding its implementation. - there's no reason to implement all these things as macros. Redo them in C. Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Kaiyang Zhao authored
Print the promo watermark in zoneinfo just like other watermarks. This helps users check and verify all the watermarks are appropriate. Link: https://lkml.kernel.org/r/20240801232548.36604-3-kaiyang2@cs.cmu.eduSigned-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Kaiyang Zhao authored
Patch series "mm: print the promo watermark in zoneinfo", v2. This patch (of 2): Define promo_wmark_pages and convert current call sites of wmark_pages with fixed WMARK_PROMO to using it instead. Link: https://lkml.kernel.org/r/20240801232548.36604-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240801232548.36604-2-kaiyang2@cs.cmu.eduSigned-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Kaiyang Zhao authored
Currently in migrate_balanced_pgdat(), ALLOC_CMA flag is not passed when checking watermark on the migration target node. This does not match the gfp in alloc_misplaced_dst_folio() which allows allocation from CMA. This causes promotion failures when there are a lot of available CMA memory in the system. Therefore, we change the alloc_flags passed to zone_watermark_ok() in migrate_balanced_pgdat(). Link: https://lkml.kernel.org/r/20240801180456.25927-1-kaiyang2@cs.cmu.eduSigned-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Takero Funaki authored
This patch fixes the zswap global shrinker, which did not shrink the zpool as expected. The issue addressed is that shrink_worker() did not distinguish between unexpected errors and expected errors, such as failed writeback from an empty memcg. The shrinker would stop shrinking after iterating through the memcg tree 16 times, even if there was only one empty memcg. With this patch, the shrinker no longer considers encountering an empty memcg, encountering a memcg with writeback disabled, or reaching the end of a memcg tree walk as a failure, as long as there are memcgs that are candidates for writeback. Systems with one or more empty memcgs will now observe significantly higher zswap writeback activity after the zswap pool limit is hit. To avoid an infinite loop when there are no writeback candidates, this patch tracks writeback attempts during memcg tree walks and limits reties if no writeback candidates are found. To handle the empty memcg case, the helper function shrink_memcg() is modified to check if the memcg is empty and then return -ENOENT. Link: https://lkml.kernel.org/r/20240731004918.33182-3-flintglass@gmail.com Fixes: a65b0e76 ("zswap: make shrinking memcg-aware") Signed-off-by: Takero Funaki <flintglass@gmail.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Takero Funaki authored
Patch series "mm: zswap: fixes for global shrinker", v5. This series addresses issues in the zswap global shrinker that could not shrink stored pages. With this series, the shrinker continues to shrink pages until it reaches the accept threshold more reliably, gives much higher writeback when the zswap pool limit is hit. This patch (of 2): This patch fixes an issue where the zswap global shrinker stopped iterating through the memcg tree. The problem was that shrink_worker() would restart iterating memcg tree from the tree root, considering an offline memcg as a failure, and abort shrinking after encountering the same offline memcg 16 times even if there is only one offline memcg. After this change, an offline memcg in the tree is no longer considered a failure. This allows the shrinker to continue shrinking the other online memcgs regardless of whether an offline memcg exists, gives higher zswap writeback activity. To avoid holding refcount of offline memcg encountered during the memcg tree walking, shrink_worker() must continue iterating to release the offline memcg to ensure the next memcg stored in the cursor is online. The offline memcg cleaner has also been changed to avoid the same issue. When the next memcg of the offlined memcg is also offline, the refcount stored in the iteration cursor was held until the next shrink_worker() run. The cleaner must release the offline memcg recursively. [yosryahmed@google.com: make critical section more obvious, unify comments] Link: https://lkml.kernel.org/r/CAJD7tkaScz+SbB90Q1d5mMD70UfM2a-J2zhXDT9sePR7Qap45Q@mail.gmail.com Link: https://lkml.kernel.org/r/20240731004918.33182-1-flintglass@gmail.com Link: https://lkml.kernel.org/r/20240731004918.33182-2-flintglass@gmail.com Fixes: a65b0e76 ("zswap: make shrinking memcg-aware") Signed-off-by: Takero Funaki <flintglass@gmail.com> Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Zhaoyu Liu authored
It should be checked by filemap_get_folio() if SWAP_HAS_CACHE was marked while reading a share swap page. It would re-allocate a folio if the swap cache was not ready now. We save the new folio to avoid page allocating again. Link: https://lkml.kernel.org/r/20240731133101.GA2096752@bytedanceSigned-off-by: Zhaoyu Liu <liuzhaoyu.zackary@bytedance.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
For KSM folios, the function actually does what it is supposed to do: even having multiple mappings inside the same MM is considered "sharing", as there is no real relationship between these KSM page mappings -- in contrast to mapping the same file range twice and having the same pagecache page mapped twice. Link: https://lkml.kernel.org/r/20240731160758.808925-1-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
Let's simplify and reduce code indentation. In the RMAP_LEVEL_PTE case, we already check for nr when computing partially_mapped. For RMAP_LEVEL_PMD, it's a bit more confusing. Likely, we don't need the "nr" check, but we could have "nr < nr_pmdmapped" also if we stumbled into the "/* Raced ahead of another remove and an add? */" case. So let's simply move the nr check in there. Note that partially_mapped is always false for small folios. No functional change intended. Link: https://lkml.kernel.org/r/20240710214350.147864-1-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
David Hildenbrand authored
We removed hugetlb_follow_page_mask() in commit 9cb28da5 ("mm/gup: handle hugetlb in the generic follow_page_mask code") but forgot to cleanup some leftovers. While at it, simplify the hugetlb comment, it's overly detailed and rather confusing. Stating that we may end up in there during coredumping is sufficient to explain the PF_DUMPCORE usage. Link: https://lkml.kernel.org/r/20240731142000.625044-1-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Wei Yang authored
After commit 73db3abd ("init/modpost: conditionally check section mismatch to __meminit*"), we can get rid of __ref annotations. Link: https://lkml.kernel.org/r/20240726010157.6177-1-richard.weiyang@gmail.comSigned-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Barry Song authored
Right now, swapcache_prepare() and swapcache_clear() supports one entry only, to support large folios, we need to handle multiple swap entries. To optimize stack usage, we iterate twice in __swap_duplicate(): the first time to verify that all entries are valid, and the second time to apply the modifications to the entries. Currently, we're using nr=1 for the existing users. [v-songbaohua@oppo.com: clarify swap_count_continued and improve readability for __swap_duplicate] Link: https://lkml.kernel.org/r/20240802071817.47081-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240730071339.107447-2-21cnbao@gmail.comSigned-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-