If you do 'echo 0 0 > /proc/sys/vm/lowmem_reserve_ratio' the kernel gets a
divide-by-zero.

Prevent that, and fiddle with some whitespace too.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Instead of setting one value lots of times, let's set lots of values once
each, as we should..

This fixes possible inconsistencies that might arise in a version-1 superblock
when devices fail and are removed.

Usage of version-1 superblocks is not yet widespread and no actual problems
have been reported.

From: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into northbeach.davemloft.net:/home/davem/src/BK/sparc-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Support for s3c2400 uarts in the s3c2410.c driver,
to go with the s3c2410 and s3c2440 support already
in there.
Add PORT_S3C2400 to include/linux/serial_core.h

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

Update info on supported CPUs, add Lucas to
the list of contributors.
Add section on adding new machines

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

I'm oopsing on shutdown on a machine that has a Via Rhine adapter in it:

Unable to handle kernel paging request at virtual address e0803003
[...]
EIP is at ioread8+0x2c/0x40
Call Trace:
 [<c0103d5f>] show_stack+0x7f/0xa0
 [<c0103efa>] show_registers+0x15a/0x1c0
 [<c01040ce>] die+0xce/0x150
 [<c0113406>] do_page_fault+0x356/0x692
 [<c01039ff>] error_code+0x2b/0x30
 [<c026b490>] rhine_shutdown+0x60/0x140
 [<c0253ad9>] device_shutdown+0x89/0x8b
 [<c012461c>] sys_reboot+0xac/0x200
 [<c0102f71>] sysenter_past_esp+0x52/0x75


Seems like it is the ioread8 in:

        /* Hit power state D3 (sleep) */
        iowrite8(ioread8(ioaddr + StickyHW) | 0x03, ioaddr + StickyHW);

that fails. StickyHW is 0x83. lspci says:

0000:00:07.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine] (rev 06)
        Flags: bus master, medium devsel, latency 32, IRQ 18
        I/O ports at ec00 [size=128]
        Memory at dfffff80 (32-bit, non-prefetchable) [size=128]

In other words, it's trying to read outside of the I/O range (0x80),
which matches the fauling address.

I'm guessing my chip revision doesn't support WOL, it's a crappy noname
card.

It does seem as if rhine_power_init checks quirks for rqWOL before
touching any registers. Should rhine_shutdown do the same? Proposed
patch below, which resolves the problem on my system.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

From: Herbert Xu <herbert@gondor.apana.org.au>

Fix bug #4223.

OK, this happened because we got preempted before sis900_mii_probe
finished setting the sis_priv->mii.  Theoretically this can happen
with SMP as well but I suppose the number of SMP machines with sis900
is fairly small.

Anyway, the fix is to make sure that sis900_mii_probe is done before
the device can be opened.  This patch does it by moving the setup
before register_netdevice.

Since the netdev name is not available before register_netdev, I've
changed the relevant printk's to use pci_name instead.  Note that
one of those printk's may be called after register_netdev as well.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

This moves us away from using the rwsem, although recursive adds and removes of class devices
is not yet possible (nor is it really known if it even is needed.)  So this simple change is
done instead.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If further finer grained locking is needed, we can add a lock to the sysdev_class to
lock the class drivers list.  But if you do that, remember the global list also is still
there and needs to be protected.  That's why I went with a simple lock for everything.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Heh, "global_drivers" as a static...
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Thanks to Alessandro Rubini <rubini@gnudd.com> for pointing this out.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Thanks to Alessandro Rubini <rubini@gnudd.com> for pointing this out.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This forces the caller to provide the lock, but as they all already had one, it's not a big change.
It also removes the now-unneeded cdev_subsys.  Thanks to Jon Corbet for reminding me about that.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

into suse.de:/home/greg/linux/BK/do/sh-2.6

This is needed if the class code is going to be made easier to use, and it makes the code
smaller and easier to understand.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Paul Mundt <paul.mundt@nokia.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The attached patch makes read/write semaphores use interrupt disabling
spinlocks in the slow path, thus rendering the up functions and trylock
functions available for use in interrupt context.  This matches the
regular semaphore behaviour.

I've assumed that the normal down functions must be called with interrupts
enabled (since they might schedule), and used the irq-disabling spinlock
variants that don't save the flags.
Signed-Off-By: David Howells <dhowells@redhat.com>
Tested-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adrian Bunk <bunk@stusta.de> writes:

> This patch contains the following cleanups:
> - make the needlessly global struct aoe_fops static
> - #if 0 the unused global function aoechr_hdump

Thanks for the patch.  The original patch leaves the prototype for
aoechr_hdump in aoe.h, but since this function is just for debugging,
it seems better to just take both prototype and definition out.


remove aoechr_hdump
make aoe_fops static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Suse 9.1 Pro doesn't put /sys in /etc/mtab.  This patch makes the
example aoe status.sh script work when sysfs is mounted but `mount`
doesn't mention sysfs.


aoe status.sh: handle sysfs not in /etc/mtab
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch makes disk errors fail the IO instead of getting logged and
ignored.


Fail IO on disk errors
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Bodo Eggert <7eggert@gmx.de> writes:

> Ed L Cashin <ecashin@coraid.com> wrote:
>
>> +if=A0test=A0-z=A0"$conf";=A0then
>> +=A0=A0=A0=A0=A0=A0=A0=A0conf=3D"`find=A0/etc=A0-type=A0f=A0-name=A0udev=
.conf=A02>=A0/dev/null`"
>> +fi
>> +if=A0test=A0-z=A0"$conf"=A0||=A0test=A0!=A0-r=A0$conf;=A0then
>> +=A0=A0=A0=A0=A0=A0=A0=A0echo=A0"$me=A0Error:=A0could=A0not=A0find=A0rea=
dable=A0udev.conf=A0in=A0/etc"=A01>&2
>> +=A0=A0=A0=A0=A0=A0=A0=A0exit=A01
>> +fi
>
> This will fail and print
> ---
> bash: test: etc/udev.conf: binary operator expected
> ---
> if there is more than one udev.conf.
>
> Fix: Always put quotes around variables.

Thanks.  With the changes below, it still will complain if it finds
more than one udev.conf, but only if /etc/udev/udev.conf doesn't
exist.

Quote all shell variables, and use /etc/udev/udev.conf if available.
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

add documentation for udev users
Signed-off-by: Ed L. Cashin <ecashin@coraid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I just accidently built AoE on x86-64 and it emits a warning
due to conversion of types of different size, trivial fix:
Signed-off-by: Alexander Nyberg <alexn@dsv.su.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/char/tpm/tpm.c: In function `show_pcrs':
drivers/char/tpm/tpm.c:228: warning: passing arg 1 of `tpm_transmit' from incompatible pointer type
drivers/char/tpm/tpm.c:238: warning: passing arg 1 of `tpm_transmit' from incompatible pointer type
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/char/tpm/tpm_atmel.c:131: unknown field `fops' specified in initializer
drivers/char/tpm/tpm_atmel.c:131: warning: missing braces around initializer
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

With older gcc's:

drivers/char/tpm/tpm_nsc.c:238: unknown field `fops' specified in initializer
drivers/char/tpm/tpm_nsc.c:238: warning: missing braces around initializer
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

There were misplaced spinlock acquires and releases in the probe, close and release
paths which were causing might_sleep and schedule while atomic error messages accompanied
by stack traces when the kernel was compiled with SMP support. Bug reported by Reben Jenster
<ruben@hotheads.de>
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch is a device driver to enable new hardware.  The new hardware is
the TPM chip as described by specifications at
<http://www.trustedcomputinggroup.org>.  The TPM chip will enable you to
use hardware to securely store and protect your keys and personal data.
To use the chip according to the specification, you will need the Trusted
Software Stack (TSS) of which an implementation for Linux is available at:
<http://sourceforge.net/projects/trousers>.
Signed-off-by: Leendert van Doorn <leendert@watson.ibm.com>
Signed-off-by: Reiner Sailer <sailer@watson.ibm.com>
Signed-off-by: Dave Safford <safford@watson.ibm.com>
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is needed for the upcoming klist code from Pat.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Do this instead of using the rwsem of a subsys.
Smaller, faster, and I'm trying to get rid of the rwsem in the subsys.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>