- 21 Aug, 2016 12 commits
-
-
Zhiyong Tao authored
The commit adds the device tree binding documentation for the mediatek auxadc found on Mediatek MT2701. Thermal gets auxadc sample data by iio device. So the commit changes auxadc device tree binding documentation from /soc/mediatek/auxadc.txt to /iio/adc/mt6577_auxadc.txt. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Alison Schofield authored
Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile maxim_thermocouple. Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by:
-
Alison Schofield authored
Driver was checking for direct mode but not locking it. Use claim/release helper functions to guarantee the device stays in direct mode during raw reads. Signed-off-by:
-
Johanna Abrahamsson authored
CHECK: Alignment should match open parenthesis Signed-off-by:
Johanna Abrahamsson <johanna@mjao.org> Signed-off-by:
-
Matt Ranostay authored
Signed-off-by:
Matt Ranostay <mranostay@gmail.com> Signed-off-by:
-
Matt Ranostay authored
Since there are overlapping volatile regions between parts, and only register that isn't volatile is the temperature compensation provided from userspace. Signed-off-by:
-
Matt Ranostay authored
Signed-off-by:
-
Matt Ranostay authored
Add support for Texas Instruments ADC141S626, and ADC161S626 chips. Signed-off-by:
-
Matt Ranostay authored
Add iio_channel_cb_get_iio_dev function to allow getting the underlying iio_dev. This is useful for setting the trigger of the consumer ADC device. Signed-off-by:
-
Jelle van der Waa authored
Minimal implementation of an IIO driver for the Domintech DMARD09 3-axis accelerometer. Only supports reading the x,y,z axes at the moment. Implementation based on the Android driver from the Acer Liquid E2 kernel sources. Signed-off-by:
Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by:
-
Aleksei Mamlin authored
This patch add support for Domintech DMARD05, DMARD06 and DMARD07 accelerometers. Signed-off-by:
Aleksei Mamlin <mamlinav@gmail.com> Acked-by:
-
Aleksei Mamlin authored
Add vendor-prefix for Domintech Co., Ltd. Signed-off-by:
-
- 15 Aug, 2016 8 commits
-
-
Matt Ranostay authored
Enumerate the processed channels (e.g. *_input) as well the raw channels. Signed-off-by:
-
Daniel Wagner authored
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context sx9500_read_proximity() sx9500_inc_chan_users() sx9500_inc_data_rdy_users() wait_for_completion_interruptible() s9500_irq_thread_handler() complete() reinit_completion() Signed-off-by:Daniel Wagner <daniel.wagner@bmw-carit.de> Signed-off-by:
-
Daniel Wagner authored
There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: waiter context waker context nau7802_read_irq() reinit_completion() nau7802_read_conversion() wait_for_completion_interruptible_timeout() nau7802_eoc_trigger() complete() Signed-off-by: -
Alison Schofield authored
Replace the code that guarantees the device stays in direct mode with iio_device_claim_direct_mode() which does same. Signed-off-by:
-
Alison Schofield authored
hdc100x supports Texas Instruments HDC1000 and HDC1008 relative humidity and temperature sensors. Add these product names to Kconfig. Signed-off-by:
-
Christophe JAILLET authored
It is likely that checking the result of 'pm_runtime_set_active' is expected here. Fixes: f0e5f57d ("iio: light: us8152d: Add power management support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Linus Walleij authored
This adds a driver for the Asahi Kasei AK8974 and its sibling AMI305 magnetometers. It was deployed on scale in 2009 on a multitude of devices. It is distincly different from AK8973 and AK8975 and needs its own driver. This patch is based on the long lost work of Samu Onkalo at Nokia, who made a misc character device driver for the Maemo/MeeGo Nokia devices, before the time of the IIO subsystem. It was mounted in e.g. the Nokia N950, N8, N86, N97 etc. It is also mounted on the ST-Ericsson HREF reference designs. It works nicely in sysfs: $ cat in_magn_x_raw && cat in_magn_y_raw && cat in_magn_z_raw -55 -101 161 And with buffered reads using a simple HRTimer trigger: $ generic_buffer -c10 -a -n ak8974 -t foo iio device number being used is 3 iio trigger number being used is 2 No channels are enabled, enabling all channels Enabling: in_magn_x_en Enabling: in_magn_y_en Enabling: in_magn_z_en Enabling: in_timestamp_en /sys/bus/iio/devices/iio:device3 foo -58.000000 -102.000000 157.000000 946684970985321044 -60.000000 -98.000000 159.000000 946684971012237548 -60.000000 -106.000000 163.000000 946684971032257080 -62.000000 -94.000000 169.000000 946684971052185058 -58.000000 -98.000000 163.000000 946684971072204589 -54.000000 -100.000000 163.000000 946684971092224121 -53.000000 -103.000000 164.000000 946684971112731933 -50.000000 -102.000000 165.000000 946684971132232666 -61.000000 -101.000000 164.000000 946684971152191162 -57.000000 -99.000000 168.000000 946684971172210693 Disabling: in_magn_x_en Disabling: in_magn_y_en Disabling: in_magn_z_en Disabling: in_timestamp_en I cannot currently scale these raw values to gauss. This is because of lack of documentation. I have sent a request for a datasheet to Asahi Kasei. The driver can optionally use a DRDY line IRQ to capture data, else it will sleep and poll. Cc: Samu Onkalo <samu.onkalo@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Tested-By:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the AK8974 magnetometer, similar to those for the AK8975. Cc: devicetree@vger.kernel.org Cc: Samu Onkalo <samu.onkalo@intel.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Acked-by:
-
- 24 Jul, 2016 5 commits
-
-
William Breathitt Gray authored
The Measurement Computing CIO-DAC is a family of 16-bit and 12-bit analog output devices. The analog outputs are from AD660BN/AD7237 converters with each output buffered by an OP-27. Voltage ranges are configured via physical jumpers on the device. This driver does not support the devices' simulataneous update mode; the XFER jumper option should be deselected for all analog output channels. This driver provides IIO support for the Measurement Computing CIO-DAC family: CIO-DAC16, CIO-DAC08, and PC104-DAC06. The base port addresses for the devices may be configured via the base array module parameter. Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
-
Alison Schofield authored
Replace the code that guarantees the device stays in direct mode with iio_device_claim_direct_mode() which does same. Signed-off-by:
-
Alison Schofield authored
Replace the code that guarantees the device stays in direct mode with iio_device_claim_direct_mode() which does same. Signed-off-by:
-
Christophe Chapuis authored
On the Cube i9 tablet, the ACPI id for the Kionix kxcj9 accelerometer is "KIOX000A" (as can be seen in the DSDT of the Cube i9 tablet). It is the same accelerometer, so only adding the ACPI id is needed. Signed-off-by:
Christophe Chapuis <chris.chapuis@gmail.com> Reviewed-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Alison Schofield authored
I2C_CLASS_HWMON is for a hardware monitoring chip wanting auto-detection. IIO drivers don't typically use .class. Remove it. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Acked-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
- 10 Jul, 2016 14 commits
-
-
Peter Meerwald-Stadler authored
Signed-off-by:
Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
and drop unused PROX_DRIVE Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
VCNL4000, VCNL4010 and VCNL4020 chips are fairly compatible from a software point of view, added features are not yet supported by the driver patch adds a check for the product ID and demotes the corresponding dev_info() to dev_dbg() Signed-off-by:
-
Matt Ranostay authored
Add initial driver support for MAX6675, and MAX31855 thermocouple chips. Cc: Marek Vasut <marex@denx.de> Cc: Matt Porter <mporter@konsulko.com> Signed-off-by:
-
- 05 Jul, 2016 1 commit
-
-
Bijosh Thykkoottathil authored
Removed unwanted return statements from the function mma8452_set_freefall_mode. Signed-off-by:
Bijosh Thykkoottathil <bijosh.t@hotmail.com> Acked-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
-
