- 09 May, 2011 40 commits
-
-
Bruce Allan authored
commit 627c8a04 upstream. Reset the PHY before first accessing it. Doing so, ensure that the PHY is in a known good state before we read/write PHY registers. This fixes a driver probe failure. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [Backported to 2.6.32 by dann frazier <dannf@debian.org>] Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Oskar Schirmer authored
commit a7851ce7 upstream. cifs_root_iget allocates full_path through cifs_build_path_to_root, but fails to kfree it upon cifs_get_inode_info* failure. Make all failure exit paths traverse clean up handling at the end of the function. Signed-off-by:
Oskar Schirmer <oskar@scara.com> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Reviewed-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Mike Christie authored
commit 5738d444 upstream. blk_get_request sets the cmd_flags, so we should not and do not need to set them. If we did set them to a different value then it can cause a oops in the elevator code. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
Hannes Reinecke authored
commit 6c71dcb2 upstream. This patch fixes the request setup code for mode selects. I got the fixes from Hannes Reinecke while trying to hunt down some problems and merged it into one patch. I am sending it because Hannes is busy with other things. The patch fixes: - setting of the length for mode selects. - setting of the data direction for mode select 10. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Rezwanul Kabir authored
commit 410d44c7 upstream. This is to support Precision M4500 and others. Signed-off-by:
Rezwanul Kabir <Rezwanul_Kabir@dell.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Erik Andren authored
commit cb6a7937 upstream. The Latitude C640 has another variation of dell in its DMI vendor entry. Add it to the whitelist in order to enjoy the sweet fruits of software backlight toggling. Signed-off-by:
Erik Andren <erik.andren@gmail.com> Signed-off-by:
-
Phil Blundell authored
commit a27e13d3 upstream. Don't declare variable sized array of iovecs on the stack since this could cause stack overflow if msg->msgiovlen is large. Instead, coalesce the user-supplied data into a new buffer and use a single iovec for it. Signed-off-by:
Phil Blundell <philb@gnu.org> Signed-off-by:
-
Hagen Paul Pfeifer authored
commit 9e834297 upstream. Function argument len was redeclarated within the function. This patch fix the redeclaration of symbol 'len'. Signed-off-by:
Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by:
-
Larry Finger authored
commit 9f2a0fac upstream. On module removal, the sdio version of b43 generates the following warning: [ 851.560519] ------------[ cut here ]------------ [ 851.560531] WARNING: at drivers/mmc/core/core.c:237 mmc_wait_for_cmd+0x88/0x90() [ 851.560534] Hardware name: 20552PG [ 851.560536] Modules linked in: b43(-) ssb mmc_block binfmt_misc rfcomm sco bnep ppdev l2cap ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp kvm_intel kvm arc4 iwlagn snd_hda_codec_conexant snd_hda_intel snd_hda_codec iwlcore snd_hwdep snd_pcm thinkpad_acpi mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq r852 joydev snd_timer sm_common pcmcia nand snd_seq_device cfg80211 sdhci_pci btusb psmouse tpm_tis yenta_socket nand_ids lp snd pcmcia_rsrc nand_ecc bluetooth sdhci tpm pcmcia_core parport mtd snd_page_alloc serio_raw tpm_bios soundcore nvram led_class sha256_generic aes_i586 aes_generic dm_crypt i915 drm_kms_helper drm ahci intel_agp i2c_algo_bit intel_gtt e1000e libahci video agpgart output [ 851.560620] Pid: 2504, comm: rmmod Not tainted 2.6.36-titan0+ #1 [ 851.560622] Call Trace: [ 851.560631] [<c014a102>] warn_slowpath_common+0x72/0xa0 [ 851.560636] [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90 [ 851.560641] [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90 [ 851.560645] [<c014a152>] warn_slowpath_null+0x22/0x30 [ 851.560649] [<c04d94c8>] mmc_wait_for_cmd+0x88/0x90 [ 851.560655] [<c0401585>] ? device_release+0x25/0x80 [ 851.560660] [<c04df210>] mmc_io_rw_direct_host+0xa0/0x150 [ 851.560665] [<c04df370>] mmc_io_rw_direct+0x30/0x40 [ 851.560669] [<c04e06e7>] sdio_disable_func+0x37/0xa0 [ 851.560683] [<f8dfcb80>] b43_sdio_remove+0x30/0x50 [b43] [ 851.560687] [<c04df8cc>] sdio_bus_remove+0x1c/0x60 [ 851.560692] [<c016d39f>] ? blocking_notifier_call_chain+0x1f/0x30 [ 851.560697] [<c0404991>] __device_release_driver+0x51/0xb0 [ 851.560701] [<c0404a7f>] driver_detach+0x8f/0xa0 [ 851.560705] [<c0403c83>] bus_remove_driver+0x63/0xa0 [ 851.560709] [<c0405039>] driver_unregister+0x49/0x80 [ 851.560713] [<c0405039>] ? driver_unregister+0x49/0x80 [ 851.560718] [<c04dfad7>] sdio_unregister_driver+0x17/0x20 [ 851.560727] [<f8dfcb42>] b43_sdio_exit+0x12/0x20 [b43] [ 851.560734] [<f8dfe76f>] b43_exit+0x17/0x3c [b43] [ 851.560740] [<c017fb8d>] sys_delete_module+0x13d/0x200 [ 851.560747] [<c01fd7d2>] ? do_munmap+0x212/0x300 [ 851.560752] [<c010311f>] sysenter_do_call+0x12/0x28 [ 851.560757] ---[ end trace 31e14488072d2f7d ]--- [ 851.560759] ------------[ cut here ]------------ The warning is caused by b43 not claiming the device before calling sdio_disable_func(). Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Reported-by:
Arnd Hannemann <arnd@arndnet.de> Tested-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Uwe Kleine-König authored
commit 81ca03a0 upstream. This fixes a build breakage introduced by commit 4c2ef25f ("mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume") Cc: David Brownell <david-b@pacbell.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-mmc@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Acked-by:
Maxim Levitsky <maximlevitsky@gmail.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Maxim Levitsky authored
commit 4c2ef25f upstream. If you don't use CONFIG_MMC_UNSAFE_RESUME, as soon as you attempt to suspend, the card will be removed, therefore this patch doesn't change the behavior of this option. However the removal will be done by pm notifier, which runs while userspace is still not frozen and thus can freely use del_gendisk, without the risk of deadlock which would happen otherwise. Card detect workqueue is now disabled while userspace is frozen, Therefore if you do use CONFIG_MMC_UNSAFE_RESUME, and remove the card during suspend, the removal will be detected as soon as userspace is unfrozen, again at the moment it is safe to call del_gendisk. Tested with and without CONFIG_MMC_UNSAFE_RESUME with suspend and hibernate. [akpm@linux-foundation.org: clean up function prototype] [akpm@linux-foundation.org: fix CONFIG_PM-n linkage, small cleanups] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Michael Müller authored
commit 84e2f037 upstream. This patch introduces support for DVB-T for the following dibcom based card: Elgato EyeTV Diversity (USB-ID: 0fd9:0011) Support for the Elgato silver IR remote is added too (set parameter dvb_usb_dib0700_ir_proto=0) [w.sang@pengutronix.de: rebased to current linuxtv-master] Signed-off-by:
Michael Müller <mueller_michael@alice-dsl.net> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> [bwh: Adjust context and numbering for 2.6.32] Signed-off-by:
-
Kyle McMartin authored
commit d11c7add upstream. For Fedora, I want to force perf to link against libiberty.a for cplus_demangle, rather than libbfd.a for bfd_demangle due to licensing insanity on binutils. (libiberty is LGPL2, libbfd is GPL3.) If we just rely on autodetection, we'll end up with libbfd linked against us, since they're both in binutils-static in the buildroot. Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20100510204335.GA7565@bombadil.infradead.org> Signed-off-by:
Kyle McMartin <kyle@redhat.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 1703f2c3 upstream. At least on Debian PARISC64, using: acme@parisc:~/git/linux-2.6-tip$ gcc -v Using built-in specs. Target: hppa-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Debian 4.3.4-6' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --enable-multiarch --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --enable-mpfr --disable-libssp --enable-checking=release --build=hppa-linux-gnu --host=hppa-linux-gnu --target=hppa-linux-gnu Thread model: posix gcc version 4.3.4 (Debian 4.3.4-6) there are issues about using 'gcc -o /dev/null': /usr/bin/ld: final link failed: File truncated collect2: ld returned 1 exit status So we test that and use /dev/null in environments where it works, while using an .INTERMEDIATE file on those where it can't be used, so that the .perf.dev.null file can be used instead and then deleted when make exits. Researched-with: Kyle McMartin <kyle@mcmartin.ca> Researched-with: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> [bwh: Backport to 2.6.32] Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 83039518 upstream. QUIET_STDERR is used when detecting if -fstack-protector-all can be used. Noticed while building the perf tools on a Debian PARISC64 machine. Signed-off-by:
-
Michael S. Tsirkin authored
commit 81516c5f upstream. gcc with no flags typically is a sane default for systems to use, and looking at the running kernel is probably broken for cross-builds anyway, so let's not do this. Add EXTRA_CFLAGS so that users can override default gcc mode if they want to. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091122121335.GA24254@redhat.com> Signed-off-by:
-
Michael S. Tsirkin authored
commit b197c7ef upstream. On error, suggest installing static libraries along with shared libraries. Signed-off-by:
-
Michael S. Tsirkin authored
commit 7baed9af upstream. Make standard error show up on console when V=2 is set. Signed-off-by:
-
Michael S. Tsirkin authored
commit 75138650 upstream. This makes it possible to build perf statically, by performing: make LDFLAGS=-static Since static libraries are only searched in the order they are specified, move library list from LDFLAGS to EXTLIBS, so that they are put at the end of linker command line. Signed-off-by:
-
Michael Cree authored
commit 5d7bdab7 upstream. Some architectures (e.g. Alpha) do not support the -fstack-protector-all compiler option and the use of the option with -Werror causes the compiler to abort and the build fails. Test that the compiler supports -fstack-protector-all before inclusion in CFLAGS. Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091111074302.GA3728@omega> Signed-off-by:
-
Steven Rostedt authored
commit 60d526f7 upstream. When using gdb to debug perf, it is practically impossible to use when perf is compiled with -O6. For developers, this patch adds the DEBUG feature to the make command line so that a developer can easily remove the optimization flag. LKML-Reference: <1255590330.8392.446.camel@twins> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091020232033.984323261@goodmis.org> Signed-off-by:
-
Randy Dunlap authored
commit 1abc7f55 upstream. Check for libelf headers and glibc headers separately so that the error message correctly identifies which package installation is missing/needed. Signed-off-by:
-
Edgar (gimli) Hucek authored
commit 3e3ede7d upstream. Adding the new MacBookAir3,1(2) to btusb. Output without the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Output with the patch and btusb loaded : T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=821b Rev= 0.34 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Edgar (gimli) Hucek <gimli@dark-green.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by:
-
Nobuhiro Iwamatsu authored
commit 3cd01976 upstream. Bluetooth controller of MacbookPro 7,1 does not work. Because Device Class of these controllers was set 255 (Vendor Sepecific Class). T: Bus=04 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8213 Rev=01.86 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller S: SerialNumber=5C5948C81B99 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) Signed-off-by:
Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by:
-
Nobuhiro Iwamatsu authored
commit 9c047157 upstream. Bluetooth controller of MacbookPro 6,2 does not work. Because Device Class of these controllers was set 255 (Vendor Sepecific Class). T: Bus=01 Lev=03 Prnt=03 Port=02 Cnt=03 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05ac ProdID=8218 Rev=00.22 S: Manufacturer=Apple Inc. S: Product=Bluetooth USB Host Controller C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
-
Pavel Roskin authored
commit b59a52f1 upstream. Use rt2x00dev->ops->extra_tx_headroom, not rt2x00dev->hw->extra_tx_headroom in the tx code, as the later may include other headroom not to be used in the chipset driver. Signed-off-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Gertjan van Wingerde authored
commit 7a4a77b7 upstream. Current rt2x00 drivers may result in a "ieee80211_tx_status: headroom too small" error message when a frame needs to be properly aligned before transmitting it. This is because the space needed to ensure proper alignment isn't requested from mac80211. Fix this by adding sufficient amount of alignment space to the amount of headroom requested for TX frames. Reported-by:
David Ellingsworth <david@identd.dyndns.org> Signed-off-by:
-
Gertjan van Wingerde authored
commit e6218cc4 upstream. Set the value of extra_tx_headroom in a central place, rather than in each of the drivers. This is preparatory for taking alignment space into account in the TX headroom requested by rt2x00. Signed-off-by:
-
Gertjan van Wingerde authored
commit d24deb25 upstream. Add a definition of the amount of TX headroom reserved by mac80211 itself for its own purposes. Also add BUILD_BUG_ON to validate the value. This define can then be used by drivers to request additional TX headroom in the most efficient manner. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Rusty Russell authored
commit 58eba97d upstream. virtio net will never try to overflow the TX ring, so the only reason add_buf may fail is out of memory. Thus, we can not stop the device until some request completes - there's no guarantee anything at all is outstanding. Make the error message clearer as well: error here does not indicate queue full. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Bruce Rogers authored
commit 3e9d08ec upstream. Under harsh testing conditions, including low memory, the guest would stop receiving packets. With this patch applied we no longer see any problems in the driver while performing these tests for extended periods of time. Make sure napi is scheduled subsequent to each napi_enable. Signed-off-by:
Bruce Rogers <brogers@novell.com> Signed-off-by:
Olaf Kirch <okir@suse.de> Signed-off-by:
-
Edgar (gimli) Hucek authored
commit 87232dd4 upstream. This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the alsa sound system. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit f46119b7 upstream. Reference: Novell bnc#645066 https://bugzilla.novell.com/show_bug.cgi?id=645066Signed-off-by:
-
Vince Weaver authored
commit 4e7d7c60 upstream. I've found the following patch is necessary to enable line-in on my MacBookPro 5,3 machine. With the patch applied I've successfully recorded audio from the line-in jack. This is based on the existing 5,5 support. Signed-off-by:
Vince Weaver <vweaver1@eecs.utk.edu> Signed-off-by:
-
Rafael Avila de Espindola authored
commit 1a5ba2e9 upstream. With the attached patch I am able to use the sound on a new IMac 27. What works: *) Internal speakers *) Internal microphone *) Headphone I don't have an external mic or a SPDIF device to test the rest. Signed-off-by:
Rafael Avila de Espindola <rafael.espindola@gmail.com> Signed-off-by:
-
Risto Suominen authored
commit b6d73350 upstream. Lineout (Pro Speaker) detection on PowerMac G4 Digital Audio (Tumbler). Signed-off-by:
Risto Suominen <Risto.Suominen@gmail.com> Signed-off-by:
-
Risto Suominen authored
commit 819ef70b upstream. Reverse headphone detection bit on PowerMac G4 Digital Audio (Tumbler). Signed-off-by:
-
Ben Hutchings authored
commit a254dba3 upstream. Reported-by:
Carmen Cru <carmen.cru@belgacom.net> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Edgar Hucek authored
commit 132af032 upstream. This patch add support for the MacBookAir3,1 and MacBookAir3,2 to the applesmc driver. [rydberg@euromail.se: minor cleanup] Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Henrik Rydberg authored
commit 405eaa1c upstream. This patch adds generic support for the MacBook Pro 7 family based on the 7,1 model. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
