- 25 Sep, 2015 22 commits
-
-
Eric Dumazet authored
ip6_dst_lookup_flow() and ip6_dst_lookup_tail() do not touch socket, lets add a const qualifier. This will permit the same change in inet6_csk_route_req() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
This is used by TCP listener core, and listener socket shall not be modified by inet_csk_route_req(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Very soon, TCP stack might call inet_csk_route_req(), which calls inet_csk_route_req() with an unlocked listener socket, so we need to make sure ip_route_output_flow() is not trying to change any field from its socket argument. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Soon, listener socket wont be locked when tcp_openreq_init_rwin() is called. We need to read socket fields once, as their value could change under us. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Soon, listener socket spinlock will no longer be held, add const arguments to tcp_v[46]_init_req() to make clear these functions can not mess socket fields. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kubeček authored
The __netdev_find_adj() helper does not use its first argument, only the device to find and list to walk through. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Hemminger says: ==================== l2tp: module autoloading With L2TP it was necessary to manually load modules which is a nuisance and not required with other tunneling protocols. This set of patches adds the aliases and module load hook to get rid of the necessity of modprobing. ==================== Acked-By: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
No longer need explicit modprobe's and update to use ip instead of deprecated ifconfig command. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
When creating a IP encapsulated tunnel the necessary l2tp module should be loaded. It already works for UDP encapsulation, it just doesn't work for direct IP encap. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
It should not be necessary to do explicit module loading when configuring L2TP. Modules should be loaded as needed instead (as is done already with netlink and other tunnel types). This patch adds a new module alias type and code to load the sub module on demand. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Provide a device_type information for slave network devices created by DSA, this is useful for user-space application to easily locate/search for devices of a specific kind. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== switchdev: transaction item queue and cleanup ==================== Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Now, since we have only 2 values for transaction phase, just use bool. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The enum is going to disappear, use the helpers instead. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
No longer used by drivers, as transaction queue with item destructors takes care of abort phase internally in switchdev code. So kill it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Shouldn't have been there in the first place. Now it is unused, kill it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Benefit from previously introduced transaction item queue infrastructure and remove rocker specific transaction memory management. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
There will be needed to have switchdev_trans available down in the call chain, so propagate it instead of trans phase enum. This enum will be removed anyway. Also, use prepare/commit phase check helpers to get information about current phase of transaction. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Add helpers which should be used int attr_set/obj_add switchdev ops to check the phase of transaction. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Before it disappears completely, move transaction phase enum under transaction structure and make attr/obj structures a bit cleaner. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
This is temporary, name "trans" will be used for something else and "trans_ph" will eventually disappear. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Sep, 2015 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-09-23 This series contains updates to ixgbe only. Mark provides all the changes in this series, first clears the destination location for I2C data initially so that the received data will not be corrupted by previous attempts. Then reduced the pauses/delays in the PHY detection when no SFP is present by reducing the number of retires, once an SFP is detected, the "normal" number of retries in PHY detection will be used. Added support for X55EM_x SFP+ dual-speed, and fixed 1G and 10G link stability for X550EM_x by configuring the CS4227 correctly by moving code to ixgbe_setup_mac_link_sfp_x550em(). Added functionality to reset CS4227, since on some platforms the CS4227 does not initialize properly. Next reduces the SFP polling rate, due to when an SFP is not present, the I2C timeouts that result are very costly. So prevent the SFP polling from being done more than once every two seconds. Added support for I2C bus MUX. Fixed the setting of RDRXCTL register which should fall through X540 and 82599, not 82598. In addition, added small packet padding support in X550 by setting RDRXCTL.PSP when the driver is in SRIOV mode. Fixed a known hardware issue where the PCI transactions pending bit sticks high when there are pending transactions, so workaround the issue by wait and then continue with our reset flow. Added a new device ID for X550EM device with SFPs. Provided a fix with the DCA setup, which was suggested by Alex Duyck <aduyck@mirantis.com>, by making it so that we always set the relaxed ordering bits related to the DCA registers even if DCA is not enbaled. Then moves the configuration out of the ixgbe_down() and into ixgbe_configure() before enabling the transmit and receive rings. This ensures that DCA is configured correctly before starting the processing of packets. Fixed VM-to-VM loopback mode which requires that FCRTH be set, but the datasheets did not specify what the value should be. It has now been determined that the correct value should be RXPBSIZE - (24*1024). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Neal suggested to move sk_txhash init into tcp_create_openreq_child(), called both from IPv4 and IPv6. This opportunity was missed in commit 58d607d3 ("tcp: provide skb->hash to synack packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
Use of_property_read_u32 instead of of_get_property with return value checks and endianness conversion. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
Use of_property_read_u32 to read the "clock-frequency" property instead of using of_get_property with return value checks. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
Since commit 12fd84f4 ("ipv6: Remove unused neigh argument for icmp6_dst_alloc() and its callers."), the neigh parameter of ndisc_send_na and ndisc_send_ns is unused. CC: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
The genl_notify function has too many arguments for no real reason - all callers use genl_info to get them anyway. Just pass the genl_info down to genl_notify. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Rustad authored
With the addition of X550em_x SFP+ support, the driver is now functionally equivalent to what will be the 4.2.1 driver when released, so change the version to match. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
The X540 thermal interrupt (IXGBE_EIMS_TS) is not an SDP, so it doesn't need to be enabled in ixgbe_setup_gpie(). In fact the value is simply not for the GPIE register at all. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
The 82599 and X540 datasheets require that FCRTH be "set" for Tx switching (VM-to-VM loopback) but it did not previously specify what the value should be set to. It has now been determined that the correct value is RXPBSIZE - (24*1024). This setting is also required for later devices. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
A logic error here results in the adapter_stopped flag only being cleared when ixgbe_setup_fc returns an error. Correct the logic. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
This change does two things. First, it makes it so that we always set the relaxed ordering bits related to the DCA registers even if DCA is not enabled. Second, it moves the configuration out of the ixgbe_down function and into the ixgbe_configure function before enabling the Rx and Tx rings. This ensures that DCA is configured correctly before starting to process packets. Thanks to Alex Duyck for this fix. CC: Alex Duyck <aduyck@mirantis.com> Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
Add new device ID for X550EM device with SFPs. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
This patch skips the PCI transactions pending check in ixgbe_disable_pcie_master. This is done to addresses a known HW issue where the PCI transactions pending bit sticks high when there are pending transactions. HW engineering instructed to workaround this issue by wait and then continue with our reset flow. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
This patch sets RDRXCTL.PSP when the driver is in SRIOV mode which enables padding of small packets. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
Setting the X550* RDRXCTL register should fall through into X540 and 82599, not 82598. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
The timeout path is supposed to release the semaphore, so do that. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
Take control of an I2C mux that selects which SFP is attached to the I2C bus. The control of the mux is captured in the taking and releasing of the related semaphore. Because only port 1 can control the mux, port 1 always leaves the mux set to select port 0. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
Reduce the frequency of polling for SFP modules. Because the service task sometimes runs at high rates, we can poll for SFPs too often. When an SFP is not present, the I2C timeouts that result are very costly. So, prevent SFP polling from being done more than once every two seconds. To reduce latency, the poll time is cleared in a couple of cases to permit the next service task execution to poll the SFP module. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-