Pull "Add support for mt6592, mt8127 and mt8135 Socs from Mediatek"
from Matthias Brugger:

Here comes the pull request which introduces basic support for
Mediatek SoCs mt6592, mt8127 and mt8135.

The patches for the mt81xx got merged in the late tree for v3.18 but
were not be merged at the end. They got a small fix regarding the
compatible and model string in the dts files.

* tag 'v3.19-next-dts' of https://github.com/mbgg/linux-mediatek:
  dt-bindings: add documentation for Mediatek SoC
  ARM: mediatek: add dts for mt6592-evb
  ARM: mediatek: Add basic support for mt6592
  dt-bindings: add more chips in documentation for Mediatek SoC
  ARM: dts: Build dtb for mt8127 & mt8135
  ARM: mediatek: add dts for MT8135 evaluation board.
  ARM: mediatek: Add basic support for mt8135
  ARM: mediatek: add dts for 8127 Moose board
  ARM: mediatek: Add basic support for mt8127

Signed-off-by; Arnd Bergmann <arnd@arndb.de>

Merge tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Pull "Keystone dts updates for 3.19" from Santosh Shilimkar:

	- PCIE controller related updates
	- 1GBe phy related upates

* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1
  ARM: dts: keystone: add DT bindings for PCI controller for port 0
  ARM: dts: k2l-evm: add 1g ethernet phys nodes
  ARM: dts: k2e-evm: add 1g ethernet phys nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "Broadcom Cygnus SoC Device Tree changes" from  Florian Fainelli:

This pull request contains the Broadcom Cygnus Device Tree changes:

- binding documentation for the SoC and clock
- cygnus SoC and clock dtsi files
- DTS for Cygnus Entreprise phone, BCM911360K and BCM958300K

* tag 'arm-soc/for-3.19/cygnus-dts-v2' of http://github.com/brcm/linux:
  ARM: dts: Enable Broadcom Cygnus SoC
  dt-bindings: Document Broadcom Cygnus SoC and clocks

[arnd: something went wrong here, we already had pulled an earlier
 version of the same patches, which had the wrong license statement.
 I've pulled this one over the old pull request and fixed up the
 conflicts now]

Conflicts:
	arch/arm/boot/dts/bcm-cygnus-clock.dtsi
	arch/arm/boot/dts/bcm-cygnus.dtsi
	arch/arm/boot/dts/bcm911360_entphn.dts
	arch/arm/boot/dts/bcm911360k.dts
	arch/arm/boot/dts/bcm958300k.dts
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch corrects the vendor-prefix for isl29028 in the compatible property from
"isil,isl29028" to "isl,isl29028" according to listed vendor-prefixes in
Documentation/devicetree/bindings/vendor-prefixes.txt. Incorrect vendor-prefix "isl"
was reported by checkpatch.pl warning for drivers/staging/iio/light/isl29028.c.
Thus incorrect vendor-prefix "isil" was corrected for every mention of device isl29028.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch adds the correct vendor-prefix for device isl29028 and
maintains deprecated vendor-prefix found by checkpatch warning
for older kernel releases.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch documents deprecated vendor name "isil" to fix warning of
undocumented string for device isl29028 as reported while running checkpatch.pl
on drivers/staging/iio/light/isl29028.c. This is done to maintain compatibility
with older kernels.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch documents the device isl29028 with its vendor-prefix. Undocumented deprecated vendor-prefix
found by checkpatch also documented for compatibility reasons.
Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The model B and B+ differ in the GPIO lines for ACT and PWR leds, and the
I2S interface.
Signed-off-by: Matthias Klein <matthias.klein@linux.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v3.19/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Device tree related changes for omaps" from Tony Lindgren:

- Fix currently harmless but wrong sizes for various GPMC connected
  devices

- Set up timings for several GPMC connected devices to get rid of
  bootloader dependencies in later patches

- Enable various drivers for dra7xx

- Prepare Igep boards to support new variants

- Add intial support for BeagleBoard-X15

* tag 'omap-for-v3.19/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (37 commits)
  ARM: dts: DRA7: Add aliases for all serial ports
  ARM: dts: Add am57xx-beagle-x15
  ARM: OMAP2+: igep00x0: Add pdata-quirks for the btwilink device.
  ARM: dts: omap3-igep00x0: Remove i2c2 node.
  ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. F
  ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file.
  ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G
  ARM: dts: omap3-igep0030-common: Introduce igep0030 common dtsi file.
  ARM: dts: omap3-igep00x0: Move outside common file the on board Wifi module.
  ARM: dts: omap3-igep0020: Specify IGEPv2 revision in device tree.
  ARM: dts: omap3-igep0030: Specify IGEP COM revision in device tree.
  ARM: dts: omap3-igep00x0: Move NAND configuration to a common place.
  ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common.
  ARM: dts: dra7: add labels to DWC3 nodes
  ARM: dts: dra72x-evm: Enable CPSW and MDIO
  ARM: dts: dra7-evm: Keep all VDD rails always-on
  ARM: dts: dra72-evm: Add MMC nodes
  ARM: dts: dra72-evm: Add power button node
  ARM: dts: dra72-evm: Provide explicit pinmux for TPS PMIC
  ARM: dts: dra72-evm: Add regulator information to USB2 PHYs
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "mvebu DT changes for v3.19" from Jason Cooper:

 - mvebu
    - ReadyNAS 102 leds, esata
    - ReadyNAS 2120 esata
    - Add cache-unified for Aurora L2 node
    - Add ref clk for timer and watchdog on Armada 375
    - Cleanup Armada XP pinctrl for GigE
    - Add RGMII pinctrl, i2c eeprom, and fix 74hc595 counter on Lenovo ix4-300d

 - kirkwood
    - Add DLink DIR665 and it's DSA configuration

* tag 'mvebu-dt-3.19' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: armada-xp: Fix 74hc595 count for Lenovo ix4-300d
  ARM: mvebu: armada-xp: Add I2C eeprom on Lenovo ix4-300d
  ARM: mvebu: armada-xp: Add RGMII pinctrl to Lenovo ix4-300d
  ARM: mvebu: armada-xp: Add GE0 pinctrl settings for GMII
  ARM: mvebu: armada-xp: Move GE0/1 pinctrl settings for RGMII
  ARM: mvebu: armada-xp: Use pinctrl node alias
  ARM: mvebu: armada-xp: Add node alias to pinctrl and add base address
  ARM: mvebu: armada-xp: Consolidate pinctrl node
  ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture
  ARM: Kirkwood: Add support for DLink DIR665
  ARM: mvebu: Enable rear eSATA ports of NETGEAR ReadyNAS 2120
  ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC
  arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file
  arm: mvebu: Fix LED color in NETGEAR ReadyNAS 102 .dts file
  ARM: mvebu: Fix the Aurora L2 cache node with the required cache-unified property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "ARM: DT:  Hisilicon terminal SoC HiX5HD2 DT updates for 3.19" from Wei Xu:

- Add reboot node, reusing syscon-reboot
- Add I2C nodes Hisilicon IP
- Add IR node based on Hisilicon IP
- Add Watchdog node based on ARM IP
- Add GPIO nodes based on ARM GPIO IP
- Add SATA node based on Hisilicon IP
- Add USB nodes
- Add MMC nodes based on Synopsys IP
- Add GMAC nodes based on Hisilicon IP

* tag 'hix5hd2-dt-for-3.19' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hix5hd2: add reboot node
  ARM: dts: hix5hd2: add i2c node
  ARM: dts: hix5hd2: add ir node
  ARM: dts: hix5hd2: add wdg node
  ARM: dts: hix5hd2: add gpio node
  ARM: dts: hix5hd2: add sata node
  ARM: dts: hix5hd2: add usb node
  ARM: dts: hix5hd2: add mmc node
  ARM: dts: hix5hd2: add gmac node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-cleanups3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Third Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:

* Use keyboard as gpio-keys node name

* tag 'renesas-dt-cleanups3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: kzm9g-reference: Use keyboard as gpio-keys node name
  ARM: shmobile: koelsch: Use keyboard as gpio-keys node name
  ARM: shmobile: lager: Use keyboard as gpio-keys node name
  ARM: shmobile: armadillo800eva: Use keyboard as gpio-keys node name
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:

* Drop console= bootargs parameter on alt
* Correct scifb* naming on r8a73a4
* Drop 0x unit-address prefixes
* Remove unnecessary MMC options

* tag 'renesas-dt-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: alt dts: Drop console= bootargs parameter
  ARM: shmobile: r8a73a4: fix scifb* naming
  ARM: shmobile: kzm9g-reference dts: Drop bogus 0x unit-address prefix
  ARM: shmobile: r8a7791 dtsi: Drop bogus 0x unit-address prefix
  ARM: shmobile: r8a7790 dtsi: Drop bogus 0x unit-address prefix
  ARM: shmobile: r8a7790 dtsi: Remove unnecessary MMC options
  ARM: shmobile: r8a7779 dtsi: Remove unnecessary MMC options
  ARM: shmobile: r8a7778 dtsi: Remove unnecessary MMC options
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman:

* Add Add SoC-specific SATA compatible property to r8a7779
* Enable DMA for MMCIF on r8a7791 and r8a7790
* Enable USB-PHY, HS-USB and USB3.0 on r8a7791 and r8a7790
* Enable TMU timer via DT on r8a7778
* Enable CMT timer via DT on r8a73a4
* Add MMP and {SR}GX clocks to  r8a7791 and r8a7790
* Correct scifa2 clock index on r8a7740
* Add missing INTCA for irqpin on r8a7740

* tag 'renesas-dt-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
  ARM: shmobile: r8a7779 dtsi: Add SoC-specific SATA compatible property
  ARM: shmobile: r8a7791: Reference DMA channels in MMCIF DT node
  ARM: shmobile: r8a7790: Reference DMA channels in MMCIF DT nodes
  ARM: shmobile: r8a7791: Add MMCIF0 DT node
  ARM: shmobile: r8a7790: Rename mmcif node to mmc
  ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property
  ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property
  ARM: shmobile: henninger: enable HS-USB
  ARM: shmobile: koelsch: enable HS-USB
  ARM: shmobile: r8a7791: add HS-USB device node
  ARM: shmobile: lager: enable HS-USB
  ARM: shmobile: r8a7790: add HS-USB device node
  ARM: shmobile: r8a7791: add USB3.0 device node
  ARM: shmobile: lager: enable USB3.0
  ARM: shmobile: r8a7790: add USB3.0 device node
  ARM: shmobile: r8a7794: Add arch_timer to device tree
  ARM: shmobile: bockw-reference: Initialise TMU device using DT
  ARM: shmobile: r8a7778: Add TMU nodes
  ARM: shmobile: armadillo800eva dts: Enable TMU0
  ARM: shmobile: r8a7740 dtsi: Add TMU0 and TMU1 device nodes
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is a base for the DT updates, merged through the arm-soc
cleanup branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This adds a DT binding documentation for the MT6592 SoC from Mediatek.
Signed-off-by: Howard Chen <ibanezchen@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

The mt6592-evb is an evaluation board based on the MT6592 SoC.
Signed-off-by: Howard Chen <ibanezchen@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

* A dtsi for boards based on Mediatek MT6592 SoCs
* Compatible string in arch/arm/mach-mediatek/mediatek.c
Signed-off-by: Howard Chen <ibanezchen@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add MT8127 & MT8135 from Mediatek.
Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This allows the "make dtbs" to build the moose and mt8135-evbp1
for MediaTek SoC
Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This appears to be the best match for ePAPR.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This appears to be the best match for ePAPR.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This appears to be the best match for ePAPR.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This appears to be the best match for ePAPR.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Evbp1 is a tablet evaluation board based on MT8135 SoC.
Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This adds a basic dtsi for MT8135 based SoC.
Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Moose is a tablet evalutation board based on MT8127 SoC.
Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This adds a basic dtsi for MT8127 SoC.
Signed-off-by: Joe.C <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add serial port aliases for consoles > 6.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.

For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15

AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page

Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6

Just add basic support for the moment, the following updates are needed:
  i)	Ethernet - depends on SoC dts fixes
  ii)	USB Client (USB2) - depends on GPIO extcon
  ii)	HDMI - additional driver fixes pending
  iii)	Audio - additional driver fixes pending

NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add btwilink device for IGEPv2 Rev. F and IGEP COM MODULE Rev. G.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We can't suppose that the i2c2 pins are configured as I2C bus, these pins are
connected to expansion connectors.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for the new hardware revision of the IGEPv2. Basically, the new
revision F replaces the old Wifi module for a Wilink8 based module.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use the omap3-igep0020-common.dtsi file and remove repeated parts leaving
the nodes that are not common between IGEPv2 hardware revisions.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for the new hardware revision of the IGEP COM MODULE. Basically,
the new revision G replaces the old Wifi module for a Wilink8 based module.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use the omap3-igep0030-common.dtsi file and remove repeated parts leaving
the nodes that are not common between IGEP COM MODULE hardware revisions.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

New IGEP boards revisions will use another Wifi module, so this patch moves
the DT nodes outside the common omap3-igep.dtsi file to specific DT for every
board.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We'll introduce new hardware revisions soon. This patch is only to
indicate which board revision supports this device tree file in order
to avoid confusions.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We'll introduce new hardware revisions soon. This patch is only to
indicate which board revision supports this device tree file in order
to avoid confusions.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

At this moment all supported boards use same NAND chip, so has more sense
move the GPMC and NAND configuration to the omap3-igep.dtsi common place.
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>