Merge tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig

Samsung defconfig udpates for v4.4

- exynos_defconfig
  : enable USB Video Class for Peach boards.
  : enable DWC2 USB and USB ethernet gadget
  : enable LEDs (LEGS_GPIO and LEDS_PWM)for Odroid-XU3/XU4
  : enable RTL8152 for Odroid-XU4
  : enable WiFi-Ex as a module instead of build-in
  : disable temporal simplefb support (FB_SIMPLE) because
    exynos DRM driver can support it now

- multi_v7_defconfig
  : enable DWC2 USB and USB ethernet gadget
  : enable RTL8152 for Odroid-XU4

* tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
  ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4
  ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in
  ARM: exynos_defconfig: Disable simplefb support
  ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4
  ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget
  ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget
  ARM: exynos_defconfig: Enable USB Video Class support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig

ARM: tegra: Default configuration updates for v4.4-rc1

Enable touchscreen and audio support on Toradex Colibri platforms.

* tag 'tegra-for-4.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Update multi_v7_defconfig
  ARM: tegra: Update default configuration
  ARM: tegra: Rebuild default configuration on v4.3-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig

defconfig update for 4.4:
- Add sama5d2 and its peripherals to sama5_defconfig and multi_v7_defconfig
- Trivial savedefconfig updates to at91_dt_defconfig and sama5_defconfig

* tag 'at91-ab-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: multi_v7_defconfig: Add Atmel SDHCI device
  ARM: multi_v7_defconfig: Add Atmel Flexcom device
  ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC
  ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig
  ARM: at91/defconfig: update at91_dt defconfig
  ARM: at91/defconfig: update sama5 defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

Odroid-XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over
USB 3.0.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

The Marvell WiFi-Ex driver tries to load a firmware on probe. So if the
driver is built-in and probed before a firmware is available, this is
not loaded and the chip does not work.

This happens for example if an initramfs isn't used since the driver is
probed before the root filesystem is mounted.

Change the default config since the driver isn't needed for machines to
boot and is more convenient to have it enabled as a module to avoid
requiring an initramfs or to have the firmware built into the kernel.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

The simplefb driver allows the kernel to render on a pre-allocated
buffer that's been initialized by firmware before the kernel boots.

This option was enabled to have display working on the Exynos5250
Snow Chromebook by commit da9d0fbf ("ARM: exynos: defconfig
update") since proper DRM/KMS support did not exist at that time.

But now that the Exynos DRM driver has support for this hardware,
there is no need to have simplefb enabled. In fact, if a user has
a u-boot that injects the simplefb dev node to the FDT before pass
it to the kernel, display won't be properly initialized and only a
blank screen will be shown since there isn't a proper handoff from
the simplefb driver to the Exynos DRM driver.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Tested-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

Odroid XU3 family boards come with RGB LEDs. Enabling LEDS_GPIO and
LEDS_PWM allows monitoring the board alive state (heartbeat) and
MMC/SDcard IO usage.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
[k.kozlowski: Rewritten the commit message]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards,
so enable DWC2 driver as well as the most common USB Ethernet gadget.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in
Silicon Motion USB UVC WebCam. Enable support for the USB Video Class
driver and its needed media Kconfig symbols so the camera is supported.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

Merge tag 'imx-defconfig-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig

The i.MX defconfig updates for 4.4:
 - Enable i.MX6UL touchscreen controller support.
 - Remove CONFIG_VMSPLIT_2G option since we already enabled
   CONFIG_HIGHMEM support.

* tag 'imx-defconfig-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: Remove CONFIG_VMSPLIT_2G
  ARM: imx_v6_v7_defconfig: enable imx6ul_tsc
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-defconfig-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig

Allwinner defconfig changes for 4.4

A bunch of defconfig changes to enable support for new drivers.

* tag 'sunxi-defconfig-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi_defconfig: enable MODULE_UNLOAD
  can: Allwinner A10/A20 CAN Controller support - Defconfig
  can: Allwinner A10/A20 CAN Controller support - Defconfig
  ARM: sunxi_defconfig: Enable LRADC keys (KEYBOARD_SUN4I_LRADC)
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu config for 4.4 (part 1)

Update the v7 defconfig witth usefull config for the Seagate NAS

* tag 'mvebu-config-4.4-1' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: enable options for Seagate NAS in mvebu_v7_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_defconfig_for_v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig

SoCFPGA defconfig update for v4.4
- Add the FPGA manager config option

* tag 'socfpga_defconfig_for_v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga_defconfig: enable fpga manager
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-defconfig2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig

Second Round of Renesas ARM Based SoC Defconfig Updates for v4.4

* Enable HDMI output for Renesas RCar

* tag 'renesas-defconfig2-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: multi_v7_defconfig: enable HDMI output for Renesas RCar
  ARM: shmobile: defconfig: enable HDMI output for RCar
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-defconfig-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm into next/defconfig

Qualcomm ARM Based defconfig Updates for v4.4

* Enable QCOM SMD/RPM in multi_v7_defconfig
* Enable QCOM SMD/RPM in qcom_defconfig

* tag 'qcom-defconfig-for-4.4' of git://codeaurora.org/quic/kernel/agross-msm:
  ARM: multi_v7_defconfig: Enable QCOM SMD/RPM
  ARM: qcom_defconfig: Enable SMD-RPM regulators
Signed-off-by: Olof Johansson <olof@lixom.net>

Some drivers used on a Marvell Berlin kernel were missing from
multi_v7_defconfig. This series add them:

  * The pxa168 Ethernet driver is added as a loadable module.
  * The Berlin ADC driver is added as a loadable module.
  * Both the Berlin USB PHY and SATA PHY drivers are added,
    built-in, as they are required for the already available USB
    and SATA functionalities in multi_v7_defconfig.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable some options that have recently been enabled on Tegra platforms:

  * TOUCHSCREEN_WM97XX: touchscreen support on Toradex Colibri
  * SND_SOC_TEGRA_WM9712: audio support on Toradex Colibri
Signed-off-by: Thierry Reding <treding@nvidia.com>

The AT91 SDHCI device has been introduced with Atmel SAMA5D2 SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

The Flexcom device has been introduced with Atmel SAMA5D2 SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add Atmel SAMA5D2 SoC family to multi_v7 image.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Add SAMA5D2 SoC plus Atmel flexcom and Atmel sdhci devices.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Trivial savedefconfig update.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Trivial savedefconfig update.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

CONFIG_FIXED_PHY is needed to have Ethernet working on STi boards.

Select it as built-in since RootFS is accessible from NFS on these boards.
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

- Enable SPIFI Flash and JFFS2 to support rootfs on Flash memory
- Enable USB Phy, mass storage and SCSI to support USB memory
- Enable PCF857x and JC42 I2C devices found on Hitex board
- Enable PL172 to support memory mapped NOR Flash
- New LPC18xx drivers: I2C, Watchdog, SCT PWM and RTC
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable fpga manager framework and low level driver for
socfpga in socfpga_defconfig
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

Actviate HDMI output of the RCar DU (and LVDS while we are here).
Enable the HDMI encoder chip found on Lager/Koelsch boards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch enables the following options needed by the Seagate
Personal Cloud 1 and 2-Bay and the Seagate NAS 2 and 4-Bay:

SATA_AHCI
POWER_RESET_GPIO
RTC_DRV_DS1307
RTC_DRV_PCF8563

Additionnally this patch also enables NEW_LEDS which was missing for
some reasons.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Actviate HDMI output of the RCar DU (and LVDS while we are here).
Enable the HDMI encoder chip found on Lager/Koelsch boards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch enables a number of devices currently supported by the MSM8916
boards.  These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This patch enables all of the options necessary to support the Qualcomm SMD
RPM regulator driver.
Signed-off-by: Andy Gross <agross@codeaurora.org>

This patch enables all of the options required to support SMD RPM based
regulators.
Signed-off-by: Andy Gross <agross@codeaurora.org>

Merge tag 'keystone-config' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig

Merge "Couple of ARM Keystone config patches" from Santosh Shilimkar:
	- Sync up the config with savedefconfig
	- Add basic systemd options

* tag 'keystone-config' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: configs: keystone: Add basic systemd related options
  ARM: configs: keystone: sync to savedefconfig

Similar to the power management situation on Rockchip boards, there are
two common RTC setups. For boards using the RK808 chip as a PMIC that
chip also serves as the RTC, while boards using the ACT8846 typically use
the Haoyu Microelectronics HYM8563 chip as their RTC.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Most Rockchip SoCs have a DesignWare HS OTG USB 2.0 controller, enable
the driver for the Rockchip USB 2.0 PHY to make that functional.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable options needed for HDMI out on rockchip: DRM driver, Rockchip
DesignWare HDMI glue and the rockchip IOMMU (dependency of the DRM
driver).
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Rockchip boards seem to have two common regulator setups. Various board
used the Active Semi act8846 often in combination with Silergy syr82x
regulators (e.g. Radxa Rock Pro/Rock 2, Firefly, and Netxeon R89 etc),
while others use regulator part of the Rockchip RK808 chip (e.g. the
various Veyron based chromebooks, Chipspark Popmetal etc)

Enable all these regulators.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable Rockchip I2C, SPI, PWM, thermal drivers.

Builtin are I2C (as it often required to control the pmic) and Thermal
drivers (to prevent thermal damage). SPI and PWM drivers configured as
modules
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>