- 29 Mar, 2017 36 commits
-
-
David Ahern authored
Refactor inet_netconf_notify_devconf to take the event as an input arg. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Signed-off-by:
-
Prasad Kanneganti authored
Refactor interrupt moderation code for flexibility because parameters are different for 10G and 25G cards. Currently parameters (for 10G only) come from macros compiled-in to the PF and VF drivers; fix it so that parameters suitable for the card (10G or 25G) come from the NIC firmware via response to a command. Also bump up driver version to 1.5.1 to match newer NIC firmware version. Signed-off-by:
Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
-
Vivien Didelot authored
I do not hold the copyright of the DSA core and drivers source files, since these changes have been written as an initiative of my day job. Fix this. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vivien Didelot authored
Set the trunk member of the mv88e6xxx_atu_entry structure regardless its value, so that uninitialized structures gets the correct boolean value. Note that no mainline code is affected by the current behavior. Signed-off-by:
-
Vlad Yasevich authored
This patch adds support for NETDEV_RESEND_IGMP event similar to how it works for IPv4. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: fix chip definitions The definitions of some of the mv88e6xxx_ops and mv88e6xxx_info structures are misordered and erroneous for 88E6191 and 88E6391. This patch series cleans that up. ==================== Signed-off-by: -
Vivien Didelot authored
We don't support 88E6391 anywhere in the code, so remove the unused mv88e6391_ops structure. Signed-off-by:
-
Vivien Didelot authored
The mv88e6xxx_info structure for the 88E6191 chip was pointing the mv88e6391_ops definition instead of mv88e6191_ops. Fix this. Signed-off-by:
-
Vivien Didelot authored
The related mv88e6xxx_ops structure was misplaced. Reorder it correctly to fix this. Signed-off-by:
-
Vivien Didelot authored
The related mv88e6xxx_ops and mv88e6xxx_info structure were misplaced. Reorder them correctly to fix this. Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qed: load/unload mfw series This series correct the unload flow and greatly enhances its initialization flow in regard to interactions between driver and management firmware. Patch #1 makes sure unloading is done under management-firmware's 'criticial section' protection. Patches #2 - #4 move driver into using a newer scheme for loading in regard to the MFW; This newer scheme would help cleaning the device in case a previous instance has dirtied it [preboot, PDA, etc.]. Patches #5 - #6 let driver inform management-firmware on number of resources which are dependent on the non-management firmware used. Patch #7 then uses a new resource [BDQ] instead of some set value. ==================== Signed-off-by: -
Mintz, Yuval authored
Until now, qed used some port-defined value as BDQ index for both iSCSI and FCoE. As management firmware now treats BDQ as a resource and tells each PF its BDQ-range, start using a valure from that range instead. Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Tomer Tayar authored
Management firmware is used as an arbiter between the various PFs in matters of resources, but some of the resources that need to be divided are dependent on the non-management firmware used, so management firmware first needs to be told how many resources there are before trying to divide them. As part of the initialization sequence, driver would first inform the management firmware of the available resources under a dedicated resource lock, and afterwards request for various resources which might be based on the previous set values. Signed-off-by:
Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by:
-
Tomer Tayar authored
Global locking can't properly be used to synchronize between different PFs in all scenarios, as those instances might reside in different logical partitions [e.g., when a PF is assigned via PDA to some VM]. The management firmware provides a generic infrastructure for device locks. For each 'resource', it's guaranteed it could be acquired by at most a single PF at any given time [or by management firmware]. This patch adds the necessary logic in qed for utilizing said infrastructure, implementing lock/unlock internal APIs. Signed-off-by:
-
Mintz, Yuval authored
During HW initialization, driver would set various registers to their needed values - but it assumes all registers start at their reset-value, so there's no need to re-configure a register's default value. This assumption might be incorrect, e.g., in case of preboot driver running and initializing the driver prior to our driver. To overcome this, we now ask management firmware to initiate a PF-flr early during the initialization sequence. That would return everything in the PF's scope back to default and prevent previous configurations from still being applied. Signed-off-by:
-
Tomer Tayar authored
Management firmware is used as an arbiter between the various PFs in regard to loading - it causes the various PFs to load/unload sequentially and informs each of its appropriate rule in the init. But the existing flow is too weak to handle some scenarios where PFs aren't properly cleaned prior to loading. The significant scenarios falling under this criteria: a. Preboot drivers in some environment can't properly unload. b. Unexpected driver replacement [kdump, PDA]. Modern management firmware supports a more intricate loading flow, where the driver has the ability to overcome previous limitations. This moves qed into using this newer scheme. Notice new scheme is backward compatible, so new drivers would still be able to load properly on top of older management firmwares and vice versa. Signed-off-by:
-
Mintz, Yuval authored
We'll soon need additional information, so start by changing the infrastructure to receive the initializing variables via a parameter struct. Signed-off-by:
-
Tomer Tayar authored
Management firmware is used as arbiter between different PFs which are loading/unloading, but in order to use the synchronization it offers the contending configurations need to be applied either between their LOAD_REQ <-> LOAD_DONE or UNLOAD_REQ <-> UNLOAD_DONE management firmware commands. Existing HW stop flow utilizes 2 different functions: qed_hw_stop() and qed_hw_reset() which don't abide this requirement; Most of the closure is doing outside the scope of the unload request. This patch removes qed_hw_reset() and places the relevant stop functionality underneath the management firmware protection. Signed-off-by:
-
David S. Miller authored
Parthasarathy Bhuvaragan says: ==================== tipc: subscription refcount simplifications The first patch makes the subscription refcount cleanup lockless and the second updates the subscription refcount policy. ==================== Signed-off-by: -
Ying Xue authored
When a new subscription object is inserted into name_seq->subscriptions list, it's under name_seq->lock protection; when a subscription is deleted from the list, it's also under the same lock protection; similarly, when accessing a subscription by going through subscriptions list, the entire process is also protected by the name_seq->lock. Therefore, if subscription refcount is increased before it's inserted into subscriptions list, and its refcount is decreased after it's deleted from the list, it will be unnecessary to hold refcount at all before accessing subscription object which is obtained by going through subscriptions list under name_seq->lock protection. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Ying Xue authored
After a subscription object is created, it's inserted into its subscriber subscrp_list list under subscriber lock protection, similarly, before it's destroyed, it should be first removed from its subscriber->subscrp_list. Since the subscription list is accessed with subscriber lock, all the subscriptions are valid during the lock duration. Hence in tipc_subscrb_subscrp_delete(), we remove subscription get/put and the extra subscriber unlock/lock. After this change, the subscriptions refcount cleanup is very simple and does not access any lock. Acked-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Arnd Bergmann authored
A driver must not access the two fields directly but should instead use the helper functions to set the values and keep a consistent internal state: ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe': ethernet/stmicro/stmmac/stmmac_main.c:4083:8: error: 'struct net_device' has no member named 'real_num_rx_queues'; did you mean 'real_num_tx_queues'? Fixes: a8f5102a ("net: stmmac: TX and RX queue priority configuration") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Bjorn Andersson authored
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM driver ontop of GLINK for 8996, without any modifications. Acked-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
Remove the standalone SMD implementation as we have transitioned the client drivers to use the RPMSG based one. Also remove all dependencies on QCOM_SMD from Kconfig files, in order to keep them selectable in the absence of the removed symbol. Acked-by:
-
Bjorn Andersson authored
By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by:
Kalle Valo <kvalo@codeaurora.org> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Roopa Prabhu authored
vxlan driver already implicitly supports installing of external fdb entries with NTF_EXT_LEARNED. This patch just makes sure these entries are not aged by the vxlan driver. An external entity managing these entries will age them out. This is consistent with the use of NTF_EXT_LEARNED in the bridge driver. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== Add support for pipeline debug (dpipe) Arkadi says: While doing the hardware offloading process much of the hardware specifics cannot be presented. An example for such is the routing LPM algorithm which differ in hardware implementation from the kernel software implementation. The only information the user receives is whether specific route is offloaded or not, but he cannot really understand the underlying implementation nor get the specific statistics related to that process. Another example is ACL offload using TC which is commonly implemented using TCAM memory. Currently there is no capability to gain visibility into the TCAM structure and to debug suboptimal resource allocation. This patchset introduces capability for exporting the ASICs pipeline abstraction via devlink infrastructure, which should serve as an complementary tool. This infrastructure allows the user to get visibility into the ASIC by modeling it as a set of match/action tables. The main objects defined: Table - abstraction for a single pipeline stage. Contains the available match/actions and counter availability. Entry - entry in a specific table with specific matches/actions values and dedicated counter. Header/field - tuples which describes the tables behavior. As an example one of the ASIC's L3 blocks will be modeled. The egress rif (router interface) table is the final step in the L3 pipeline processing which does match on the internal rif index which was determined before by the routing logic. The erif table determines whether to forward or drop the packet and updates the corresponding rif L3 statistics. To expose this internal resources a special metadata header will be introduced that describes the internal information gathered by the ASIC's pipeline and contains the following fields: rif_port_index, forward and drop. Some internal hardware resources have direct mapping to kernel objects. For example the rif_port_index is mapped to the net-devices ifindex. By providing this mapping the users gains visibility into the offloading process. Follow-up work will include exporting more L3 tables which will give visibility into the routing process. First stage is adding support for dpipe in devlink. Next add support in spectrum driver. Finally implement egress router interface (erif) table for spectrum ASIC as an example. --- v1->v2: Please see individual patches ==================== Signed-off-by: -
Arkadi Sharshevsky authored
Implement dpipe's table ops for erif table which provide: 1. Getting the entries in the table with the associate values. - match on "mlxsw_meta:erif_index" - action on "mlxsw_meta:forwared_out" 2. Synchronize the hardware in case of enabling/disabling counters which mean removing erif counters from all interfaces. Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Arkadi Sharshevsky authored
Add rif helper function to access the rif index and rif devices ifindex. This functions will be used by dpipe in order to dump the rif table. Signed-off-by:
-
Arkadi Sharshevsky authored
Add support for counter allocation on router interfaces. The allocation depends on the counter state of relevant table. In case the counting is disabled or no counters left the counter index will be set as invalid. Also a counter pool for router allocation is added. Signed-off-by:
-
Arkadi Sharshevsky authored
The RICNT register retrieves per port performance counter. It will be used to query the router interfaces statistics. Signed-off-by:
-
Arkadi Sharshevsky authored
Add definition for egress router interface table. This table describes the final part in the routing pipeline. This table matches the egress interface index (rif index, which is set by the previous stages and determine the out port) and makes the decision of forwarding the packet towards the L2 logic or dropping it. The metadata header is added to represent this internal information. The rif index field is mapped logically to netdevice ifindex. Signed-off-by:
-
Arkadi Sharshevsky authored
Add placeholder for dpipe. Support for specific tables and headers will be introduced in following patches. The headers are shared between all mlxsw_sp instances. Signed-off-by:
-
Arkadi Sharshevsky authored
Update RITR for counter support. This allows adding counters for ASIC's router ports. Signed-off-by:
-
Arkadi Sharshevsky authored
The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by:
-
- 28 Mar, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5e-failsafe 27-03-2017 This series provides a fail-safe mechanism to allow safely re-configuring mlx5e netdevice and provides a resiliency against sporadic configuration failures. To enable this we do some refactoring and code reorganizing to allow breaking the drivers open/close flows to stages: open -> activate -> deactivate -> close. In addition we need to allow creating fresh HW ring resources (mlx5e_channels) with their own "new" set of parameters, while keeping the current ones running and active until the new channels are successfully created with the new configuration, and only then we can safly replace (switch) old channels with new ones. For that we introduce mlx5e_channels object and an API to manage it: - channels = open_channels(new_params): open fresh TX/RX channels - activate_channels(channels): redirect traffic to them and attach them to the netdev - deactivate_channes(channels) stop traffic and detach from netdev - close(channels) Free the TX/RX HW resources of those channels With the above strategy it is straightforward to achieve the desired behavior of fail-safe configuration. In pseudo code: make_new_config(new_params) { old_channels = current_active_channels; new_channels = create_channels(new_params); if (!new_channels) return "Failed, but current channels are still active :)" deactivate_channels(old_channels); /* Can't fail */ set_hw_new_state(); /* If needed */ activate_channels(new_channels); /* Can't fail */ close_channels(old_channels); current_active_channels = new_channels; return "SUCCESS"; } At the top of this series, we change the following flows to be fail-safe: ethtool: - ring parameters - coalesce parameters - tx copy break parameters - cqe compressing/moderation mode setting (priv flags) ndos: - tc setup - set features: LRO - change mtu ==================== Signed-off-by: -
David S. Miller authored
Mahesh Bandewar says: ==================== link-status fixes for mii-monitoring The mii monitoring is divided into two phases - inspect and commit. The inspect phase technically should not make any changes to the state and defer it to the commit phase. However detected link state inconsistencies on several machines and discovered that it's the result of some inconsistent update to link states and assumption that you *always* get rtnl-mutex. In reality when trylock() fails to acquire rtnl-mutex, the commit phase is postponed until next mii-mon run. At the next round because of the state change performed in the previous inspect-run, this round does not detect any changes and would skip calling commit phase. This would result in an inconsistent state until next link event happens (if it ever happens). During the the commit phase, it's always assumed that speed and duplex fetch is always successful, but that's always not the case. However the slave state is marked UP irrespective of speed / duplex fetch operation. If the speed / duplex fetch operation results in insane values for either of these two fields, then keeping internal link state UP is not going to provide fruitful results either. Please see into individual patches for more details. ==================== Signed-off-by: -
Mahesh Bandewar authored
Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
bond_miimon_commit() marks the link UP after attempting to get the speed and duplex settings for the link. There is a possibility that bond_update_speed_duplex() could fail. This is another place where it could result into an inconsistent bonding link state. With this patch the link will be marked UP only if the speed and duplex values retrieved have sane values and processed further. Signed-off-by:
-
