- 11 Jun, 2012 4 commits
-
-
-
Jussi Kivilinna authored
rndis_check_bssid_list() originally tried to check if bssid->mac and match_bssid are equal using compare_ether_addr() when it should use !compare_ether_addr(). This check was added by commit b5257c95 as part of workaround for hardware issue. Commit 2e42e474 that replaced compare_ether_addr with ether_addr_equal relieved that this compare to be inverse of what it should be. Compare was added as response to hardware bug, where bssid-list does not contain BSSID and other information of currently connected AP (spec insists that device must provide this information in the list when connected). Lack bssid-data on current connection then causes WARN_ON somewhere in cfg80211. Workaround was to check if bssid-list returns current bssid and if it does not, manually construct bssid information in other ways. And this workaround worked, with inverse check. Which must mean that when hardware is experiencing the problem, it's actually returning empty bssid-list and this check didn't make any difference for workaround. However inverse check causes workaround be activated when bssid-list returns only entry, currently connected BSSID. That does not cause problems in itself, just slightly more inaccurate information in scan-list. Cc: Joe Perches <joe@perches.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
'cfg80211: fix interface combinations' ensures that if an interface type is not advertised by the driver in any of the interface combinations (via ieee80211_iface_combination) then it shall be treated as a single incompatible interface. if there are more than one interfaces present and changing them to incompatible interface type is not possible. These checks will be properly handled by cfg80211_change_iface -> cfg80211_can_change_interface. this patch is dependent on 'cfg80211: fix interface combinations' Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
this patch is dependent on the patch "cfg80211: fix interface combinations" In ath9k currently we have ADHOC interface as a single incompatible interface. when drv_add_interface is called during resume we got to consider number of vifs already present in addition to checking the drivers 'opmode' information about ADHOC. we incorrectly assume an ADHOC interface is already present. Then we may miss some driver specific data for the ADHOC interface after resume. The above mentioned checks can be removed from the driver, as the patch 'cfg80211: fix interface combinations' ensures that if an interface type is not advertised by the driver in any of the interface combinations(via ieee80211_iface_combination) then it shall be treated as a single incompatible interface. Fixes the following warning on suspend/resume with ibss interface. ath: phy0: Cannot create ADHOC interface when other interfaces already exist. WARNING: at net/mac80211/driver-ops.h:12 ieee80211_reconfig+0x1882/0x1ca0 [mac80211]() Hardware name: 2842RK1 wlan2: Failed check-sdata-in-driver check, flags: 0x0 Call Trace: [<c01361b2>] warn_slowpath_common+0x72/0xa0 [<f8aaa7c2>] ? ieee80211_reconfig+0x1882/0x1ca0 [mac80211] [<f8aaa7c2>] ? ieee80211_reconfig+0x1882/0x1ca0 [mac80211] [<c0136283>] warn_slowpath_fmt+0x33/0x40 [<f8aaa7c2>] ieee80211_reconfig+0x1882/0x1ca0 [mac80211] [<c06c1d1a>] ? mutex_lock_nested+0x23a/0x2f0 [<f8a95097>] ieee80211_resume+0x27/0x70 [mac80211] [<fd177edf>] wiphy_resume+0x8f/0xa0 [cfg80211] Cc: stable@vger.kernel.org Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
- 09 Jun, 2012 1 commit
-
-
Johan Hedberg authored
With LE/SMP the completion of a security level elavation from medium to high is indicated by a HCI Encryption Key Refresh Complete event. The necessary behavior upon receiving this event is a mix of what's done for auth_complete and encryption_change, which is also where most of the event handling code has been copied from. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
- 08 Jun, 2012 15 commits
-
-
Stanislaw Gruszka authored
commit 24398e39 Author: Johannes Berg <johannes.berg@intel.com> Date: Wed Mar 28 10:58:36 2012 +0200 mac80211: set HT channel before association removed IEEE80211_CONF_CHANGE_CHANNEL argument from ieee80211_hw_config, which is required by iwl4965 driver, otherwise that driver does not configure channel properly and is not able to associate. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Sasha Levin authored
llcp_sock_getname() might get called before the LLCP socket was created. This condition isn't checked, and llcp_sock_getname will simply deref a NULL ptr in that case. This exists starting with d646960f ("NFC: Initial LLCP support"). Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
-
Emmanuel Grumbach authored
This feature has been reported to be buggy and enabled by default. We therefore need to disable it manually. Cc: stable@vger.kernel.org Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
When we remove a key, we put a key index which was supposed to tell the fw that we are actually removing the key. But instead the fw took that index as a valid index and messed up the SRAM of the device. This memory corruption on the device mangled the data of the SCD. The impact on the user is that SCD queue 2 got stuck after having removed keys. The message is the log that was printed is: Queue 2 stuck for 10000ms This doesn't seem to fix the higher queues that get stuck from time to time. Cc: stable@vger.kernel.org [2.6.27+] Reviewed-by:
Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by:
-
Hauke Mehrtens authored
pc could be null if hosttype != BCMA_HOSTTYPE_PCI. If we are on a device without a pci core this function is called with pc = null by b43 and brcmsmac. If the host type is PCI we have a pci core as well and pc can not be null. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Oleksij Rempel authored
this patch fixes kernel Oops on "rmmod b43" if firmware was not loaded: BUG: unable to handle kernel NULL pointer dereference at 0000000000000088 IP: [<ffffffff8104e988>] drain_workqueue+0x25/0x142 PGD 153ac6067 PUD 153b82067 PMD 0 Oops: 0000 [#1] SMP Signed-off-by:
Oleksij Rempel <bug-track@fisher-privat.net> Signed-off-by:
-
Meenakshi Venkataraman authored
My patch iwlwifi: use correct released ucode version did not correctly report supported firmware for the 6035 device. This patch fixes it. The minimum supported firmware version for 6035 is v6. Also correct the minimum supported firmware version for the 6000g2 series of devices. Cc: stable@kernel.org Signed-off-by:
-
Johannes Berg authored
Add my new trees to the MAINTAINERS file for the components that I maintain in the new trees. Signed-off-by:
-
Qasim Javed authored
mac80211_hwsim: Set IEEE80211_STAT_ACK flag when userspace indicates that the frame has been acknowledged. The station fail average is not updated correctly since the IEEE80211_STAT_ACK flag is not set when using wmediumd with mac80211_hwsim. Set this flag when wmediumd indicates that the frame was successfully transmitted (eventually). Signed-off-by:
Qasim Javed <qasimj@gmail.com> Signed-off-by:
Javier Cardona <javier@cozybit.com> Signed-off-by:
-
Stanislaw Gruszka authored
Fix: BUG: sleeping function called from invalid context at kernel/workqueue.c:2547 in_atomic(): 1, irqs_disabled(): 0, pid: 629, name: wpa_supplicant 2 locks held by wpa_supplicant/629: #0: (rtnl_mutex){+.+.+.}, at: [<c08b2b84>] rtnl_lock+0x14/0x20 #1: (&trigger->leddev_list_lock){.+.?..}, at: [<c0867f41>] led_trigger_event+0x21/0x80 Pid: 629, comm: wpa_supplicant Not tainted 3.3.0-0.rc3.git5.1.fc17.i686 Call Trace: [<c046a9f6>] __might_sleep+0x126/0x1d0 [<c0457d6c>] wait_on_work+0x2c/0x1d0 [<c045a09a>] __cancel_work_timer+0x6a/0x120 [<c045a160>] cancel_delayed_work_sync+0x10/0x20 [<f7dd3c22>] rtl8187_led_brightness_set+0x82/0xf0 [rtl8187] [<c0867f7c>] led_trigger_event+0x5c/0x80 [<f7ff5e6d>] ieee80211_led_radio+0x1d/0x40 [mac80211] [<f7ff3583>] ieee80211_stop_device+0x13/0x230 [mac80211] Removing _sync is ok, because if led_on work is currently running it will be finished before led_off work start to perform, since they are always queued on the same mac80211 local->workqueue. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=795176Signed-off-by:Larry Finger <Larry.Finger@lwfinger.net> Acked-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
-
Stanislav Yakovlev authored
The problem was found by Larry Finger: http://marc.info/?l=linux-wireless&m=133702401700614&w=2 The problem is identical to the one for ipw2200 which is already fixed: http://marc.info/?l=linux-wireless&m=133457257407196&w=2 [ 17.766431] ------------[ cut here ]------------ [ 17.766467] WARNING: at net/wireless/core.c:562 wiphy_register+0x34c/0x3c0 [cfg80211]() [ 17.766471] Hardware name: Latitude D600 [ 17.766474] Modules linked in: ipw2100(+) libipw pcmcia cfg80211 ppdev parport_pc yenta_socket sr_mod pcmcia_rsrc parport iTCO_wdt cdrom sg rfkill pcmcia_ core lib80211 tg3 video button battery ac iTCO_vendor_support joydev shpchp pcspkr pciehp pci_hotplug autofs4 radeon ttm drm_kms_helper uhci_hcd ehci_hcd rtc _cmos thermal drm hwmon i2c_algo_bit i2c_core processor usbcore usb_common ata_generic ata_piix ahci libahci libata [ 17.766525] Pid: 474, comm: modprobe Not tainted 3.4.0-rc7-wl+ #6 [ 17.766528] Call Trace: [ 17.766541] [<c066ad08>] ? printk+0x28/0x2a [ 17.766552] [<c0230edd>] warn_slowpath_common+0x6d/0xa0 [ 17.766563] [<e0b253bc>] ? wiphy_register+0x34c/0x3c0 [cfg80211] [ 17.766573] [<e0b253bc>] ? wiphy_register+0x34c/0x3c0 [cfg80211] [ 17.766578] [<c0230f2d>] warn_slowpath_null+0x1d/0x20 [ 17.766588] [<e0b253bc>] wiphy_register+0x34c/0x3c0 [cfg80211] [ 17.766605] [<e0b5b0d6>] ipw2100_wdev_init+0x196/0x1c0 [ipw2100] [ 17.766616] [<e0b5d962>] ipw2100_pci_init_one+0x2b2/0x694 [ipw2100] [ 17.766632] [<c047ce52>] local_pci_probe+0x42/0xb0 [ 17.766637] [<c047e2b0>] pci_device_probe+0x60/0x90 [ 17.766645] [<c0376de2>] ? sysfs_create_link+0x12/0x20 [ 17.766654] [<c050f1f6>] really_probe+0x56/0x2e0 [ 17.766659] [<c037636d>] ? create_dir+0x5d/0xa0 [ 17.766667] [<c0518c6b>] ? pm_runtime_barrier+0x3b/0xa0 [ 17.766672] [<c050f5e4>] driver_probe_device+0x44/0xa0 [ 17.766677] [<c047e227>] ? pci_match_device+0x97/0xa0 [ 17.766681] [<c050f6c9>] __driver_attach+0x89/0x90 [ 17.766686] [<c050f640>] ? driver_probe_device+0xa0/0xa0 [ 17.766691] [<c050da2a>] bus_for_each_dev+0x3a/0x70 [ 17.766695] [<c050ee6c>] driver_attach+0x1c/0x30 [ 17.766699] [<c050f640>] ? driver_probe_device+0xa0/0xa0 [ 17.766704] [<c050ea77>] bus_add_driver+0x187/0x280 [ 17.766710] [<c045b9cd>] ? kset_find_obj+0x2d/0x60 [ 17.766715] [<c047e2e0>] ? pci_device_probe+0x90/0x90 [ 17.766719] [<c047e2e0>] ? pci_device_probe+0x90/0x90 [ 17.766724] [<c050fb85>] driver_register+0x65/0x110 [ 17.766729] [<c047e09d>] __pci_register_driver+0x3d/0xa0 [ 17.766738] [<e09f705c>] ipw2100_init+0x5c/0x1000 [ipw2100] [ 17.766743] [<c020110f>] do_one_initcall+0x2f/0x170 [ 17.766749] [<e09f7000>] ? 0xe09f6fff [ 17.766757] [<c0287ce8>] sys_init_module+0xa8/0x210 [ 17.766766] [<c067a075>] syscall_call+0x7/0xb [ 17.766769] ---[ end trace 559898c6bb0d1c75 ]--- [ 17.767093] ipw2100: probe of 0000:02:03.0 failed with error -5 This warning appears only if we apply Ben Hutchings' fix http://marc.info/?l=linux-wireless&m=132720204412667&w=2 for the bug reported by Cesare Leonardi http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=656813 with cfg80211 warning during device registration ("cfg80211: failed to add phy80211 symlink to netdev!"). We separate device bring up and registration with network stack to avoid the problem. Signed-off-by:
Stanislav Yakovlev <stas.yakovlev@gmail.com> Tested-by:
-
Johan Hedberg authored
If we have an unauthenticated key it is not sufficient to acheive high security. Therefore, when deciding whether to encrypt the link or request pairing, it is essential to in addition to checking the existence of a key to also check whether it is authenticated or not. Signed-off-by:
-
Johan Hedberg authored
The l2cap_conn_del function tries to cancel_sync the security timer, but when it's called from the timeout function itself a deadlock occurs. Subsequently the "hcon->l2cap_data = NULL" that's supposed to protect multiple calls to l2cap_conn_del never gets cleared and when the connection finally drops we double free's etc which will crash the kernel. This patch fixes the issue by using the HCI_CONN_LE_SMP_PEND for protecting against this. The same flag is also used for the same purpose in other places in the SMP code. Signed-off-by:
-
Vishal Agarwal authored
For BR/EDR pairing is assumed to be finished when connection is done. For LE if connection is successful it did not necessarily mean that pairing is also done but if the connection is unsuccessful it should be assumed that pairing procedure is also finished. This patch registers a new function with connect_cfm_cb callback for LE link which sends the pairing complete signal to user space if connection is unsuccessful. Signed-off-by:
Vishal Agarwal <vishal.agarwal@stericsson.com> Acked-by:
-
Johan Hedberg authored
The tk_request function takes the local IO capability as the second last parameter and the remote IO capability as the last parameter. They were previously swapped: when we receive a pairing response req->io_capability contains the local one and rsp->io_capability the remote one. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
- 06 Jun, 2012 1 commit
-
-
- 05 Jun, 2012 4 commits
-
-
Johannes Berg authored
If a given interface combination doesn't contain a required interface type then we missed checking that and erroneously allowed it even though iface type wasn't there at all. Add a check that makes sure that all interface types are accounted for. Cc: stable@kernel.org Reported-by:
-
Johannes Berg authored
Otherwise the LEDs stick around and cause issues the next time around since they're still there but not really hooked up. Cc: stable@kernel.org Signed-off-by:
-
Johannes Berg authored
Linus reported that due to mac80211 failing to register the device (due to WoWLAN) his machine crashed etc. as we double-freed the vmalloc() firmware area. His patch to fix it was very similar to this one but I noticed that there's another bug in the area: we complete the completion before starting, so since we're running in a work struct context stop() could be called while in the middle of start() which will almost certainly lead to issues. Make a modification similar to his to avoid the double- free but also move the completion to another spot so it is only done after start() either finished or failed so that stop() can have a consistent state. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vinicius Costa Gomes authored
Most probably a typo, the check should have been for BT_SK_DEFER_SETUP instead of BT_DEFER_SETUP (which right now only represents a socket option). Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by:
Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by:
-
- 04 Jun, 2012 15 commits
-
-
Johannes Berg authored
If CONFIG_PM_SLEEP is disabled, then iwlwifi doesn't support suspend/resume handlers and thus mac80211 (correctly) refuses advertising WoWLAN. Disable WoWLAN in the driver in this case. Cc: stable@kernel.org Reported-by:
Sebastian Kemper <sebastian_ml@gmx.net> Signed-off-by:
-
Arik Nemtsov authored
sta_info_cleanup locks the sta_list using rcu_read_lock however the delete operation isn't rcu safe. A race between sta_info_cleanup timer being called and a STA being removed can occur which leads to a panic while traversing sta_list. Fix this by switching to the RCU-safe versions. Cc: stable@vger.kernel.org Reported-by:
Eyal Shapira <eyal@wizery.com> Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
Seth Forshee authored
MacBook Pro models with BCM4331 wireless have been found to have the ext PA lines disabled after resuming from S3 without external power attach. This causes them to be unable to transmit. Add a workaround to ensure that the ext PA lines are enabled on BCM4331. Also extend all handling of ext PA line muxing to BCM43431 as is done in the Broadcom SDK. BugLink: http://bugs.launchpad.net/bugs/925577 Cc: Arend van Spriel <arend@broadcom.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: stable@vger.kernel.org Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Stanislaw Gruszka authored
Remove spinlock as atomic_t can be used instead. Note we use only 16 lower bits, upper bits are changed but we impilcilty cast to u16. This fix possible deadlock on IBSS mode reproted by lockdep: ================================= [ INFO: inconsistent lock state ] 3.4.0-wl+ #4 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/u:2/30374 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&intf->seqlock)->rlock){+.?...}, at: [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] {IN-SOFTIRQ-W} state was registered at: [<c04978ab>] __lock_acquire+0x47b/0x1050 [<c0498504>] lock_acquire+0x84/0xf0 [<c0835733>] _raw_spin_lock+0x33/0x40 [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f9979f2a>] rt2x00queue_write_tx_frame+0x1a/0x300 [rt2x00lib] [<f997834f>] rt2x00mac_tx+0x7f/0x380 [rt2x00lib] [<f98fe363>] __ieee80211_tx+0x1b3/0x300 [mac80211] [<f98ffdf5>] ieee80211_tx+0x105/0x130 [mac80211] [<f99000dd>] ieee80211_xmit+0xad/0x100 [mac80211] [<f9900519>] ieee80211_subif_start_xmit+0x2d9/0x930 [mac80211] [<c0782e87>] dev_hard_start_xmit+0x307/0x660 [<c079bb71>] sch_direct_xmit+0xa1/0x1e0 [<c0784bb3>] dev_queue_xmit+0x183/0x730 [<c078c27a>] neigh_resolve_output+0xfa/0x1e0 [<c07b436a>] ip_finish_output+0x24a/0x460 [<c07b4897>] ip_output+0xb7/0x100 [<c07b2d60>] ip_local_out+0x20/0x60 [<c07e01ff>] igmpv3_sendpack+0x4f/0x60 [<c07e108f>] igmp_ifc_timer_expire+0x29f/0x330 [<c04520fc>] run_timer_softirq+0x15c/0x2f0 [<c0449e3e>] __do_softirq+0xae/0x1e0 irq event stamp: 18380437 hardirqs last enabled at (18380437): [<c0526027>] __slab_alloc.clone.3+0x67/0x5f0 hardirqs last disabled at (18380436): [<c0525ff3>] __slab_alloc.clone.3+0x33/0x5f0 softirqs last enabled at (18377616): [<c0449eb3>] __do_softirq+0x123/0x1e0 softirqs last disabled at (18377611): [<c041278d>] do_softirq+0x9d/0xe0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&intf->seqlock)->rlock); <Interrupt> lock(&(&intf->seqlock)->rlock); *** DEADLOCK *** 4 locks held by kworker/u:2/30374: #0: (wiphy_name(local->hw.wiphy)){++++.+}, at: [<c045cf99>] process_one_work+0x109/0x3f0 #1: ((&sdata->work)){+.+.+.}, at: [<c045cf99>] process_one_work+0x109/0x3f0 #2: (&ifibss->mtx){+.+.+.}, at: [<f98f005b>] ieee80211_ibss_work+0x1b/0x470 [mac80211] #3: (&intf->beacon_skb_mutex){+.+...}, at: [<f997a644>] rt2x00queue_update_beacon+0x24/0x50 [rt2x00lib] stack backtrace: Pid: 30374, comm: kworker/u:2 Not tainted 3.4.0-wl+ #4 Call Trace: [<c04962a6>] print_usage_bug+0x1f6/0x220 [<c0496a12>] mark_lock+0x2c2/0x300 [<c0495ff0>] ? check_usage_forwards+0xc0/0xc0 [<c04978ec>] __lock_acquire+0x4bc/0x1050 [<c0527890>] ? __kmalloc_track_caller+0x1c0/0x1d0 [<c0777fb6>] ? copy_skb_header+0x26/0x90 [<c0498504>] lock_acquire+0x84/0xf0 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<c0835733>] _raw_spin_lock+0x33/0x40 [<f9979a20>] ? rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f9979a20>] rt2x00queue_create_tx_descriptor+0x380/0x490 [rt2x00lib] [<f997a5cf>] rt2x00queue_update_beacon_locked+0x5f/0xb0 [rt2x00lib] [<f997a64d>] rt2x00queue_update_beacon+0x2d/0x50 [rt2x00lib] [<f9977e3a>] rt2x00mac_bss_info_changed+0x1ca/0x200 [rt2x00lib] [<f9977c70>] ? rt2x00mac_remove_interface+0x70/0x70 [rt2x00lib] [<f98e4dd0>] ieee80211_bss_info_change_notify+0xe0/0x1d0 [mac80211] [<f98ef7b8>] __ieee80211_sta_join_ibss+0x3b8/0x610 [mac80211] [<c0496ab4>] ? mark_held_locks+0x64/0xc0 [<c0440012>] ? virt_efi_query_capsule_caps+0x12/0x50 [<f98efb09>] ieee80211_sta_join_ibss+0xf9/0x140 [mac80211] [<f98f0456>] ieee80211_ibss_work+0x416/0x470 [mac80211] [<c0496d8b>] ? trace_hardirqs_on+0xb/0x10 [<c077683b>] ? skb_dequeue+0x4b/0x70 [<f98f207f>] ieee80211_iface_work+0x13f/0x230 [mac80211] [<c045cf99>] ? process_one_work+0x109/0x3f0 [<c045d015>] process_one_work+0x185/0x3f0 [<c045cf99>] ? process_one_work+0x109/0x3f0 [<f98f1f40>] ? ieee80211_teardown_sdata+0xa0/0xa0 [mac80211] [<c045ed86>] worker_thread+0x116/0x270 [<c045ec70>] ? manage_workers+0x1e0/0x1e0 [<c0462f64>] kthread+0x84/0x90 [<c0462ee0>] ? __init_kthread_worker+0x60/0x60 [<c083d382>] kernel_thread_helper+0x6/0x10 Cc: stable@vger.kernel.org Signed-off-by:Helmut Schaa <helmut.schaa@googlemail.com> Acked-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Joe Perches authored
Using | with a constant is always true. Likely this should have be &. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Joe Perches authored
Using | with a constant is always true. Likely this should have be &. cc: Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Felix Fietkau authored
Fixes a lockdep warning: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/mac80211/agg-rx.c:148 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 1 lock held by arecord/11226: #0: (&tid_agg_rx->session_timer){+.-...}, at: [<ffffffff81066bb0>] call_timer_fn+0x0/0x360 stack backtrace: Pid: 11226, comm: arecord Not tainted 3.1.0-kml #16 Call Trace: <IRQ> [<ffffffff81093454>] lockdep_rcu_dereference+0xa4/0xc0 [<ffffffffa02778c9>] sta_rx_agg_session_timer_expired+0xc9/0x110 [mac80211] [<ffffffffa0277800>] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211] [<ffffffff81066c3a>] call_timer_fn+0x8a/0x360 [<ffffffff81066bb0>] ? init_timer_deferrable_key+0x30/0x30 [<ffffffff81477bb0>] ? _raw_spin_unlock_irq+0x30/0x70 [<ffffffff81067049>] run_timer_softirq+0x139/0x310 [<ffffffff81091d5e>] ? put_lock_stats.isra.25+0xe/0x40 [<ffffffff810922ac>] ? lock_release_holdtime.part.26+0xdc/0x160 [<ffffffffa0277800>] ? ieee80211_process_addba_resp+0x220/0x220 [mac80211] [<ffffffff8105cb78>] __do_softirq+0xc8/0x3c0 [<ffffffff8108f088>] ? tick_dev_program_event+0x48/0x110 [<ffffffff8108f16f>] ? tick_program_event+0x1f/0x30 [<ffffffff81153b15>] ? putname+0x35/0x50 [<ffffffff8147a43c>] call_softirq+0x1c/0x30 [<ffffffff81004c55>] do_softirq+0xa5/0xe0 [<ffffffff8105d1ee>] irq_exit+0xae/0xe0 [<ffffffff8147ac6b>] smp_apic_timer_interrupt+0x6b/0x98 [<ffffffff81479ab3>] apic_timer_interrupt+0x73/0x80 <EOI> [<ffffffff8146aac6>] ? free_debug_processing+0x1a1/0x1d5 [<ffffffff81153b15>] ? putname+0x35/0x50 [<ffffffff8146ab2b>] __slab_free+0x31/0x2ca [<ffffffff81477c3a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90 [<ffffffff81253b8f>] ? __debug_check_no_obj_freed+0x15f/0x210 [<ffffffff81097054>] ? lock_release_nested+0x84/0xc0 [<ffffffff8113ec55>] ? kmem_cache_free+0x105/0x250 [<ffffffff81153b15>] ? putname+0x35/0x50 [<ffffffff81153b15>] ? putname+0x35/0x50 [<ffffffff8113ed8f>] kmem_cache_free+0x23f/0x250 [<ffffffff81153b15>] putname+0x35/0x50 [<ffffffff81146d8d>] do_sys_open+0x16d/0x1d0 [<ffffffff81146e10>] sys_open+0x20/0x30 [<ffffffff81478f42>] system_call_fastpath+0x16/0x1b Reported-by:Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Johannes Berg authored
When any interface goes down, it could be the one that we were doing a remain-on-channel with. We therefore need to cancel the remain-on-channel and flush the related work structs so they don't run after the interface has been removed or even destroyed. It's also possible in this case that an off-channel SKB was never transmitted, so free it if this is the case. Note that this can also happen if the driver finishes the off-channel period without ever starting it. Cc: stable@kernel.org Reported-by:
Nirav Shah <nirav.j2.shah@intel.com> Signed-off-by:
-
Johannes Berg authored
Enforcing interface combinations broke uses of hwsim with multiple virtual interfaces. Advertise that all combinations are possible to fix this. Reported-by:
-
Meenakshi Venkataraman authored
As part of hardware reconfig mac80211 tries to restore the station state to its values before the hardware reconfig, but it only goes to the last-state - 1. Fix this off-by-one error. Cc: stable@kernel.org [3.4] Signed-off-by:
-
Johannes Berg authored
Since my commit iwlwifi: use valid TX/RX antenna from hw_params the config values are pure overrides, not the real values for all hardware. Therefore, the EEPROM TX power reading code checks the wrong values, it should check the hw_params values. Cc: stable@kernel.org [3.4] Reviewed-by:
-
Chun-Yeow Yeoh authored
Mesh station that joins an MBSS is reachable using mesh portal with 6 address frame by mesh stations from another MBSS if these two different MBSSes are bridged. However, if the mesh station later moves into the same MBSS of those mesh stations, it is unreachable by mesh stations in the MBSS due to the mpp_paths table is not deleted. A quick fix is to perform mesh_path_lookup, if it is available for the target destination, mpp_path_lookup is not performed. When the mesh station moves back to its original MBSS, the mesh_paths will be deleted once expired. So, it will be reachable using mpp_path_lookup again. Signed-off-by:
Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by:
-
Amitkumar Karwar authored
CFG80211_DEV_WARN_ON() at "net/wireless/ibss.c line 63" is unnecessarily triggered even after successful connection, when cfg80211_ibss_joined() is called by driver inside .join_ibss handler. This patch fixes the problem by changing 'sme_state' in ibss path and having WARN_ON() check for 'sme_state' similar to infra association. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Avinash Patil authored
mwifiex uAP supports NL80211_HIDDEN_SSID_ZERO_LEN type of hidden SSID only. NL80211_HIDDEN_SSID_ZERO_CONTENTS is not supported. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Kiran Divekar <dkiran@marvell.com> Signed-off-by:
-
Avinash Patil authored
Mark bss_config parameters as invalid before setting AP channel. This prevents from setting invalid parameters while setting AP channel to FW. Signed-off-by:
-
