[ Upstream commit 7b3320e6 ]

Commit 7ee7ef24 ("scsi: arm64: defconfig: enable configs for Hisilicon ufs")
set 'CONFIG_SCSI_UFS_HISI=y', but the configs it depends
on

  (CONFIG_SCSI_HFSHCD_PLATFORM && CONFIG_SCSI_UFSHCD)

were left to being built as modules.

Commit 1f4fa50d ("arm64: defconfig: Regenerate for v4.20") "fixed"
that by reverting to 'CONFIG_SCSI_UFS_HISI=m'.

Thing is, if the rootfs is stored in the on-board flash (which
is the "canonical" way of doing things), we either need these drivers
to be built-in, or we need to fiddle with an initramfs to access that
flash and eventually load the modules installed over there.

The former is the easiest, do that.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b2d3b5ee ]

When removing memory we need to remove the memory from the node
it was added to instead of looking up the node it should be in
in the device tree.

During testing we have seen scenarios where the affinity for a
LMB changes due to a partition migration or PRRN event. In these
cases the node the LMB exists in may not match the node the device
tree indicates it belongs in. This can lead to a system crash
when trying to DLPAR remove the LMB after a migration or PRRN
event. The current code looks up the node in the device tree to
remove the LMB from, the crash occurs when we try to offline this
node and it does not have any data, i.e. node_data[nid] == NULL.

36:mon> e
cpu 0x36: Vector: 300 (Data Access) at [c0000001828b7810]
    pc: c00000000036d08c: try_offline_node+0x2c/0x1b0
    lr: c0000000003a14ec: remove_memory+0xbc/0x110
    sp: c0000001828b7a90
   msr: 800000000280b033
   dar: 9a28
 dsisr: 40000000
  current = 0xc0000006329c4c80
  paca    = 0xc000000007a55200   softe: 0        irq_happened: 0x01
    pid   = 76926, comm = kworker/u320:3

36:mon> t
[link register   ] c0000000003a14ec remove_memory+0xbc/0x110
[c0000001828b7a90] c00000000006a1cc arch_remove_memory+0x9c/0xd0 (unreliable)
[c0000001828b7ad0] c0000000003a14e0 remove_memory+0xb0/0x110
[c0000001828b7b20] c0000000000c7db4 dlpar_remove_lmb+0x94/0x160
[c0000001828b7b60] c0000000000c8ef8 dlpar_memory+0x7e8/0xd10
[c0000001828b7bf0] c0000000000bf828 handle_dlpar_errorlog+0xf8/0x160
[c0000001828b7c60] c0000000000bf8cc pseries_hp_work_fn+0x3c/0xa0
[c0000001828b7c90] c000000000128cd8 process_one_work+0x298/0x5a0
[c0000001828b7d20] c000000000129068 worker_thread+0x88/0x620
[c0000001828b7dc0] c00000000013223c kthread+0x1ac/0x1c0
[c0000001828b7e30] c00000000000b45c ret_from_kernel_thread+0x5c/0x80

To resolve this we need to track the node a LMB belongs to when
it is added to the system so we can remove it from that node instead
of the node that the device tree indicates it should belong to.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f495222e ]

Currently the IRQ handler in HD-audio controller driver is registered
before the chip initialization.  That is, we have some window opened
between the azx_acquire_irq() call and the CORB/RIRB setup.  If an
interrupt is triggered in this small window, the IRQ handler may
access to the uninitialized RIRB buffer, which leads to a NULL
dereference Oops.

This is usually no big problem since most of Intel chips do register
the IRQ via MSI, and we've already fixed the order of the IRQ
enablement and the CORB/RIRB setup in the former commit b61749a8
("sound: enable interrupt after dma buffer initialization"), hence the
IRQ won't be triggered in that room.  However, some platforms use a
shared IRQ, and this may allow the IRQ trigger by another source.

Another possibility is the kdump environment: a stale interrupt might
be present in there, the IRQ handler can be falsely triggered as well.

For covering this small race, let's move the azx_acquire_irq() call
after hda_intel_init_chip() call.  Although this is a bit radical
change, it can cover more widely than checking the CORB/RIRB setup
locally in the callee side.
Reported-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 26a302af ]

flow_offload_alloc() calls nf_route() to get a dst_entry. Internally,
nf_route() calls ip_route_output_key() that allocates a dst_entry and
holds it. So, a dst_entry should be released by dst_release() if
nf_route() is successful.

Otherwise, netns exit routine cannot be finished and the following
message is printed:

[  257.490952] unregister_netdevice: waiting for lo to become free. Usage count = 1

Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 33cc3c0c ]

nf_flow_offload_ip_hook() and nf_flow_offload_ipv6_hook() do not check
ttl value. So, ttl value overflow may occur.

Fixes: 97add9f0 ("netfilter: flow table support for IPv4")
Fixes: 09952107 ("netfilter: flow table support for IPv6")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9dc1a38e ]

We do not restart a controller in a deleting state for timeout errors.
When in this state, unblock potential request dispatchers with failed
completions by shutting down the controller on timeout detection.
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c8e9e9b7 ]

Just like IO queues, the admin queue also will not be restarted after a
controller shutdown. Unquiesce this queue so that we do not block
request dispatch on a permanently disabled controller.
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6b733030 ]

Certain platforms like K2G reguires the outbound ATU window to be
aligned. The alignment size is already present in mem->page_size.
Use the alignment size present in mem->page_size to configure an
aligned ATU window. In order to raise an interrupt, CPU has to write
to address offset from the start of the window unlike before where
writes were always to the beginning of the ATU window.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8f220664 ]

commit 834b9051 ("misc: pci_endpoint_test: Add support for
PCI_ENDPOINT_TEST regs to be mapped to any BAR") while adding
test_reg_bar in order to map PCI_ENDPOINT_TEST regs to be mapped to any
BAR failed to update test_reg_bar in pci_endpoint_test, resulting in
test_reg_bar having invalid value when used outside probe.

Fix it.

Fixes: 834b9051 ("misc: pci_endpoint_test: Add support for PCI_ENDPOINT_TEST regs to be mapped to any BAR")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2c85f2bd ]

If vfio_pci_register_dev_region() fails then we should rollback
previous changes, ie. unmap the ATSD registers.

Fixes: 7f928917 ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cf1ec453 ]

The intel_iommu_gfx_mapped flag is exported by the Intel
IOMMU driver to indicate whether an IOMMU is used for the
graphic device. In a virtualized IOMMU environment (e.g.
QEMU), an include-all IOMMU is used for graphic device.
This flag is found to be clear even the IOMMU is used.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Fixes: c0771df8 ("intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fbc2a15e ]

With holding queue's kobject refcount, it is safe for driver
to schedule requeue. However, blk_mq_kick_requeue_list() may
be called after blk_sync_queue() is done because of concurrent
requeue activities, then requeue work may not be completed when
freeing queue, and kernel oops is triggered.

So moving the cancel of requeue_work into blk_mq_release() for
avoiding race between requeue and freeing queue.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a223770b ]

CONFIG_WATCHDOG_PRETIMEOUT_GOV build symbol adds watchdog_pretimeout.o
object to watchdog.o, the latter is compiled only if CONFIG_WATCHDOG_CORE
is selected, so it rightfully makes sense to add it as a dependency.

The change fixes the next compilation errors, if CONFIG_WATCHDOG_CORE=n
and CONFIG_WATCHDOG_PRETIMEOUT_GOV=y are selected:

  drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_register':
  drivers/watchdog/pretimeout_noop.c:35: undefined reference to `watchdog_register_governor'
  drivers/watchdog/pretimeout_noop.o: In function `watchdog_gov_noop_unregister':
  drivers/watchdog/pretimeout_noop.c:40: undefined reference to `watchdog_unregister_governor'

  drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_register':
  drivers/watchdog/pretimeout_panic.c:35: undefined reference to `watchdog_register_governor'
  drivers/watchdog/pretimeout_panic.o: In function `watchdog_gov_panic_unregister':
  drivers/watchdog/pretimeout_panic.c:40: undefined reference to `watchdog_unregister_governor'
Reported-by: Kuo, Hsuan-Chi <hckuo2@illinois.edu>
Fixes: ff84136c ("watchdog: add watchdog pretimeout governor framework")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b07e228e ]

The documentated behavior is: if max_hw_heartbeat_ms is implemented, the
minimum of the set_timeout argument and max_hw_heartbeat_ms should be used.
This patch implements this behavior.
Previously only the first 7bits were used and the input argument was
returned.
Signed-off-by: Georg Hofmann <georg@hofmannsweb.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit edbd82c5 ]

Following splat gets triggered when nfnetlink monitor is running while
xtables-nft selftests are running:

net/netfilter/nf_tables_api.c:1272 suspicious rcu_dereference_check() usage!
other info that might help us debug this:

1 lock held by xtables-nft-mul/27006:
 #0: 00000000e0f85be9 (&net->nft.commit_mutex){+.+.}, at: nf_tables_valid_genid+0x1a/0x50
Call Trace:
 nf_tables_fill_chain_info.isra.45+0x6cc/0x6e0
 nf_tables_chain_notify+0xf8/0x1a0
 nf_tables_commit+0x165c/0x1740

nf_tables_fill_chain_info() can be called both from dumps (rcu read locked)
or from the transaction path if a userspace process subscribed to nftables
notifications.

In the 'table dump' case, rcu_access_pointer() cannot be used: We do not
hold transaction mutex so the pointer can be NULLed right after the check.
Just unconditionally fetch the value, then have the helper return
immediately if its NULL.

In the notification case we don't hold the rcu read lock, but updates are
prevented due to transaction mutex. Use rcu_dereference_check() to make lockdep
aware of this.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 93fa5b28 ]

There are situations when memory regions coming from dts may be
too big for the platform physical address space. This especially
concerns XPA-capable systems. Bootloader may determine more than 4GB
memory available and pass it to the kernel over dts memory node, while
kernel is built without XPA/64BIT support. In this case the region
may either simply be truncated by add_memory_region() method
or by u64->phys_addr_t type casting. But in worst case the method
can even drop the memory region if it exceeds PHYS_ADDR_MAX size.
So lets make sure the retrieved from dts memory regions are valid,
and if some of them aren't, just manually truncate them with a warning
printed out.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Serge Semin <Sergey.Semin@t-platforms.ru>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f5e85ce8 ]

Since commit bc7d811a ("netfilter: nf_ct_h323: Convert
CHECK_BOUND macro to function"), NAT traversal for H.323
doesn't work, failing to parse H323-UserInformation.
nf_h323_error_boundary() compares contents of the bitstring,
not the addresses, preventing valid H.323 packets from being
conntrack'd.

This looks like an oversight from when CHECK_BOUND macro was
converted to a function.

To fix it, stop dereferencing bs->cur and bs->end.

Fixes: bc7d811a ("netfilter: nf_ct_h323: Convert CHECK_BOUND macro to function")
Signed-off-by: Jakub Jankowski <shasta@toxcorp.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 43c8f131 ]

rhashtable_insert_fast() may return an error value when memory
allocation fails, but flow_offload_add() does not check for errors.
This patch just adds missing error checking.

Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8520ce1e ]

The IRQ handler, mmci_irq(), loops until all status bits have been cleared.
However, the status bit signaling busy in variant->busy_detect_flag, may be
set even if busy detection isn't monitored for the current request.

This may be the case for the CMD11 when switching the I/O voltage, which
leads to that mmci_irq() busy loops in IRQ context. Fix this problem, by
clearing the status bit for busy, before continuing to validate the
condition for the loop. This is safe, because the busy status detection has
already been taken care of by mmci_cmd_irq().
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d9899030 ]

Overlayfs "fake" path is used for stacked file operations on underlying
files.  Operations on files with "fake" path must not generate fsnotify
events with path data, because those events have already been generated at
overlayfs layer and because the reported event->fd for fanotify marks on
underlying inode/filesystem will have the wrong path (the overlayfs path).

Link: https://lore.kernel.org/linux-fsdevel/20190423065024.12695-1-jencce.kernel@gmail.com/Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Fixes: d1d04ef8 ("ovl: stack file ops")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3c5a1b11 ]

When the logo is currently drawn on a virtual console, and the console
loglevel is reduced to quiet, logo_shown must be left alone, so that it
the scrolling region on that virtual console is properly reset.

Fixes: 10993504 ("fbcon: Silence fbcon logo on 'quiet' boots")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Yisheng Xie <ysxie@foxmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Marko Myllynen <myllynen@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dc69a3d5 ]

To avoid a memory leak, free the page allocated for MSI IRQ in
dw_pcie_free_msi().
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9e2b5de5 ]

If we ever did MSI-related initializations, we need to call
dw_pcie_free_msi() in the error code path.

Remove the IS_ENABLED(CONFIG_PCI_MSI) check for MSI init because
pci_msi_enabled() already has a stub for !CONFIG_PCI_MSI.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 689a5860 ]

Memory: 509108K/542612K available (3835K kernel code, 919K rwdata, 1028K rodata, 129K init, 211K bss, 33504K reserved, 0K cma-reserved)
NR_IRQS: 15
clocksource: timer: mask: 0xffffffffffffffff max_cycles: 0x1cd42e205, max_idle_ns: 881590404426 ns
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:458 clockevents_register_device+0x72/0x140
posix-timer cpumask == cpu_all_mask, using cpu_possible_mask instead
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc4-00048-ged79cc87 #4
Stack:
 604ebda0 603c5370 604ebe20 6046fd17
 00000000 6006fcbb 604ebdb0 603c53b5
 604ebe10 6003bfc4 604ebdd0 9000001ca
Call Trace:
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] ? clockevents_register_device+0x72/0x140
 [<6001f16e>] show_stack+0x13b/0x155
 [<603c5370>] ? dump_stack_print_info+0xe2/0xeb
 [<6006fcbb>] ? printk+0x0/0x94
 [<603c53b5>] dump_stack+0x2a/0x2c
 [<6003bfc4>] __warn+0x10e/0x13e
 [<60070320>] ? vprintk_func+0xc8/0xcf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6003c08b>] warn_slowpath_fmt+0x97/0x99
 [<600311a1>] ? set_signals+0x0/0x3f
 [<6003bff4>] ? warn_slowpath_fmt+0x0/0x99
 [<600842cb>] ? tick_oneshot_mode_active+0x44/0x4f
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6007d2d5>] ? __clocksource_select+0x20/0x1b1
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] clockevents_register_device+0x72/0x140
 [<60031192>] ? get_signals+0x0/0xf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60002eec>] um_timer_setup+0xc8/0xca
 [<60001b59>] start_kernel+0x47f/0x57e
 [<600035bc>] start_kernel_proc+0x49/0x4d
 [<6006c483>] ? kmsg_dump_register+0x82/0x8a
 [<6001de62>] new_thread_handler+0x81/0xb2
 [<60003571>] ? kmsg_dumper_stdout_init+0x1a/0x1c
 [<60020c75>] uml_finishsetup+0x54/0x59

random: get_random_bytes called from init_oops_id+0x27/0x34 with crng_init=0
---[ end trace 00173d0117a88acb ]---
Calibrating delay loop... 6941.90 BogoMIPS (lpj=34709504)
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 35399f87 ]

In configfs_register_group(), if create_default_group() failed, we
forget to unlink the group. It will left a invalid item in the parent list,
which may trigger the use-after-free issue seen below:

BUG: KASAN: use-after-free in __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
Read of size 8 at addr ffff8881ef61ae20 by task syz-executor.0/5996

CPU: 1 PID: 5996 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 __list_add_valid+0xd4/0xe0 lib/list_debug.c:26
 __list_add include/linux/list.h:60 [inline]
 list_add_tail include/linux/list.h:93 [inline]
 link_obj+0xb0/0x190 fs/configfs/dir.c:759
 link_group+0x1c/0x130 fs/configfs/dir.c:784
 configfs_register_group+0x56/0x1e0 fs/configfs/dir.c:1751
 configfs_register_default_group+0x72/0xc0 fs/configfs/dir.c:1834
 ? 0xffffffffc1be0000
 iio_sw_trigger_init+0x23/0x1000 [industrialio_sw_trigger]
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f494ecbcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f494ecbcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f494ecbd6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004

Allocated by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 configfs_register_default_group+0x4c/0xc0 fs/configfs/dir.c:1829
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 5987:
 set_track mm/kasan/common.c:87 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459
 slab_free_hook mm/slub.c:1429 [inline]
 slab_free_freelist_hook mm/slub.c:1456 [inline]
 slab_free mm/slub.c:3003 [inline]
 kfree+0xe1/0x270 mm/slub.c:3955
 configfs_register_default_group+0x9a/0xc0 fs/configfs/dir.c:1836
 0xffffffffc1bd0023
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881ef61ae00
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 32 bytes inside of
 192-byte region [ffff8881ef61ae00, ffff8881ef61aec0)
The buggy address belongs to the page:
page:ffffea0007bd8680 count:1 mapcount:0 mapping:ffff8881f6c03000 index:0xffff8881ef61a700
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0007ca4740 0000000500000005 ffff8881f6c03000
raw: ffff8881ef61a700 000000008010000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881ef61ad00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8881ef61ad80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
>ffff8881ef61ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                               ^
 ffff8881ef61ae80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8881ef61af00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 5cf6a51e ("configfs: allow dynamic group creation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 198790d9 ]

In free_percpu() we sometimes call pcpu_schedule_balance_work() to
queue a work item (which does a wakeup) while holding pcpu_lock.
This creates an unnecessary lock dependency between pcpu_lock and
the scheduler's pi_lock.  There are other places where we call
pcpu_schedule_balance_work() without hold pcpu_lock, and this case
doesn't need to be different.

Moving the call outside the lock prevents the following lockdep splat
when running tools/testing/selftests/bpf/{test_maps,test_progs} in
sequence with lockdep enabled:

======================================================
WARNING: possible circular locking dependency detected
5.1.0-dbg-DEV #1 Not tainted
------------------------------------------------------
kworker/23:255/18872 is trying to acquire lock:
000000000bc79290 (&(&pool->lock)->rlock){-.-.}, at: __queue_work+0xb2/0x520

but task is already holding lock:
00000000e3e7a6aa (pcpu_lock){..-.}, at: free_percpu+0x36/0x260

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #4 (pcpu_lock){..-.}:
       lock_acquire+0x9e/0x180
       _raw_spin_lock_irqsave+0x3a/0x50
       pcpu_alloc+0xfa/0x780
       __alloc_percpu_gfp+0x12/0x20
       alloc_htab_elem+0x184/0x2b0
       __htab_percpu_map_update_elem+0x252/0x290
       bpf_percpu_hash_update+0x7c/0x130
       __do_sys_bpf+0x1912/0x1be0
       __x64_sys_bpf+0x1a/0x20
       do_syscall_64+0x59/0x400
       entry_SYSCALL_64_after_hwframe+0x49/0xbe

-> #3 (&htab->buckets[i].lock){....}:
       lock_acquire+0x9e/0x180
       _raw_spin_lock_irqsave+0x3a/0x50
       htab_map_update_elem+0x1af/0x3a0

-> #2 (&rq->lock){-.-.}:
       lock_acquire+0x9e/0x180
       _raw_spin_lock+0x2f/0x40
       task_fork_fair+0x37/0x160
       sched_fork+0x211/0x310
       copy_process.part.43+0x7b1/0x2160
       _do_fork+0xda/0x6b0
       kernel_thread+0x29/0x30
       rest_init+0x22/0x260
       arch_call_rest_init+0xe/0x10
       start_kernel+0x4fd/0x520
       x86_64_start_reservations+0x24/0x26
       x86_64_start_kernel+0x6f/0x72
       secondary_startup_64+0xa4/0xb0

-> #1 (&p->pi_lock){-.-.}:
       lock_acquire+0x9e/0x180
       _raw_spin_lock_irqsave+0x3a/0x50
       try_to_wake_up+0x41/0x600
       wake_up_process+0x15/0x20
       create_worker+0x16b/0x1e0
       workqueue_init+0x279/0x2ee
       kernel_init_freeable+0xf7/0x288
       kernel_init+0xf/0x180
       ret_from_fork+0x24/0x30

-> #0 (&(&pool->lock)->rlock){-.-.}:
       __lock_acquire+0x101f/0x12a0
       lock_acquire+0x9e/0x180
       _raw_spin_lock+0x2f/0x40
       __queue_work+0xb2/0x520
       queue_work_on+0x38/0x80
       free_percpu+0x221/0x260
       pcpu_freelist_destroy+0x11/0x20
       stack_map_free+0x2a/0x40
       bpf_map_free_deferred+0x3c/0x50
       process_one_work+0x1f7/0x580
       worker_thread+0x54/0x410
       kthread+0x10f/0x150
       ret_from_fork+0x24/0x30

other info that might help us debug this:

Chain exists of:
  &(&pool->lock)->rlock --> &htab->buckets[i].lock --> pcpu_lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(pcpu_lock);
                               lock(&htab->buckets[i].lock);
                               lock(pcpu_lock);
  lock(&(&pool->lock)->rlock);

 *** DEADLOCK ***

3 locks held by kworker/23:255/18872:
 #0: 00000000b36a6e16 ((wq_completion)events){+.+.},
     at: process_one_work+0x17a/0x580
 #1: 00000000dfd966f0 ((work_completion)(&map->work)){+.+.},
     at: process_one_work+0x17a/0x580
 #2: 00000000e3e7a6aa (pcpu_lock){..-.},
     at: free_percpu+0x36/0x260

stack backtrace:
CPU: 23 PID: 18872 Comm: kworker/23:255 Not tainted 5.1.0-dbg-DEV #1
Hardware name: ...
Workqueue: events bpf_map_free_deferred
Call Trace:
 dump_stack+0x67/0x95
 print_circular_bug.isra.38+0x1c6/0x220
 check_prev_add.constprop.50+0x9f6/0xd20
 __lock_acquire+0x101f/0x12a0
 lock_acquire+0x9e/0x180
 _raw_spin_lock+0x2f/0x40
 __queue_work+0xb2/0x520
 queue_work_on+0x38/0x80
 free_percpu+0x221/0x260
 pcpu_freelist_destroy+0x11/0x20
 stack_map_free+0x2a/0x40
 bpf_map_free_deferred+0x3c/0x50
 process_one_work+0x1f7/0x580
 worker_thread+0x54/0x410
 kthread+0x10f/0x150
 ret_from_fork+0x24/0x30
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1e4e25c4 ]

The subsystem will free the asd memory on notifier cleanup, if the asd is
added to the notifier.
However the memory is freed using kfree.
Thus, we cannot allocate the asd using devm_*
This can lead to crashes and problems.
To test this issue, just return an error at probe, but cleanup the
notifier beforehand.

Fixes: 10626744 ("[media] atmel-isc: add the Image Sensor Controller code")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b42b179b ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203221

- Overview
When mounting the attached crafted image and running program, this error is reported.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_07.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out

- Messages
 kernel BUG at fs/f2fs/node.c:1279!
 RIP: 0010:read_node_page+0xcf/0xf0
 Call Trace:
  __get_node_page+0x6b/0x2f0
  f2fs_iget+0x8f/0xdf0
  f2fs_lookup+0x136/0x320
  __lookup_slow+0x92/0x140
  lookup_slow+0x30/0x50
  walk_component+0x1c1/0x350
  path_lookupat+0x62/0x200
  filename_lookup+0xb3/0x1a0
  do_fchmodat+0x3e/0xa0
  __x64_sys_chmod+0x12/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

On below paths, we can have opportunity to readahead inode page
- gc_node_segment -> f2fs_ra_node_page
- gc_data_segment -> f2fs_ra_node_page
- f2fs_fill_dentries -> f2fs_ra_node_page

Unlike synchronized read, on readahead path, we can set page uptodate
before verifying page's checksum, then read_node_page() will trigger
kernel panic once it encounters a uptodated page w/ incorrect checksum.

So considering readahead scenario, we have to do checksum each time
when loading inode page even if it is uptodated.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 45a74688 ]

With below mkfs and mount option, generic/339 of fstest will report that
scratch image becomes corrupted.

MKFS_OPTIONS  -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f /dev/zram1
MOUNT_OPTIONS -- -o acl,user_xattr -o discard,noinline_xattr /dev/zram1 /mnt/scratch_f2fs

[ASSERT] (f2fs_check_dirent_position:1315)  --> Wrong position of dirent pino:1970, name: (...)
level:8, dir_level:0, pgofs:951, correct range:[900, 901]

In old kernel, inline data and directory always reserved 200 bytes in
inode layout, even if inline_xattr is disabled, then new kernel tries
to retrieve that space for non-inline xattr inode, but for inline dentry,
its layout size should be fixed, so we just keep that reserved space.

But the problem here is that, after inline dentry conversion, inline
dentry layout no longer exists, if we still reserve inline xattr space,
after dents updates, there will be a hole in inline xattr space, which
can break hierarchy hash directory structure.

This patch fixes this issue by retrieving inline xattr space after
inline dentry conversion.

Fixes: 6afc662e ("f2fs: support flexible inline xattr size")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 793ab1c8 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203211

- Overview
When mounting the attached crafted image and making a new file, I got this error and the error messages keep repeating.

The image is intentionally fuzzed from a normal f2fs image for testing and I run with option CONFIG_F2FS_CHECK_FS on.

- Reproduces
mkdir test
mount -t f2fs tmp.img test
cd test
touch t

- Messages
[   58.820451] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.821485] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.822530] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.823571] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.824616] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.825640] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.826663] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.827698] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.828719] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.829759] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.830783] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.831828] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.832869] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.833888] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.834945] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.835996] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.837028] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.838051] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.839072] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.840100] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.841147] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.842186] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.843214] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.844267] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.845282] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.846305] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[   58.847341] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
... (repeating)

During GC, if segment type stored in SSA and SIT is inconsistent, we just
skip migrating current segment directly, since we need to know the exact
type to decide the migration function we use.

So in foreground GC, we will easily run into a infinite loop as we may
select the same victim segment which has inconsistent type due to greedy
policy. In order to end up this, we choose to shutdown filesystem. For
backgrond GC, we need to do that as well, so that we can avoid latter
potential infinite looped foreground GC.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e95bcdb2 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203233

- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
cc poc_13.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync

- Kernel messages
 F2FS-fs (sdb): Bitmap was wrongly set, blk:4608
 kernel BUG at fs/f2fs/segment.c:2102!
 RIP: 0010:update_sit_entry+0x394/0x410
 Call Trace:
  f2fs_allocate_data_block+0x16f/0x660
  do_write_page+0x62/0x170
  f2fs_do_write_node_page+0x33/0xa0
  __write_node_page+0x270/0x4e0
  f2fs_sync_node_pages+0x5df/0x670
  f2fs_write_checkpoint+0x372/0x1400
  f2fs_sync_fs+0xa3/0x130
  f2fs_do_sync_file+0x1a6/0x810
  do_fsync+0x33/0x60
  __x64_sys_fsync+0xb/0x10
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

sit.vblocks and sum valid block count in sit.valid_map may be
inconsistent, segment w/ zero vblocks will be treated as free
segment, while allocating in free segment, we may allocate a
free block, if its bitmap is valid previously, it can cause
kernel crash due to bitmap verification failure.

Anyway, to avoid further serious metadata inconsistence and
corruption, it is necessary and worth to detect SIT
inconsistence. So let's enable check_block_count() to verify
vblocks and valid_map all the time rather than do it only
CONFIG_F2FS_CHECK_FS is enabled.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ea6d7e72 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203213

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the this script.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync

 kernel BUG at fs/f2fs/f2fs.h:2012!
 RIP: 0010:truncate_node+0x2c9/0x2e0
 Call Trace:
  f2fs_truncate_xattr_node+0xa1/0x130
  f2fs_remove_inode_page+0x82/0x2d0
  f2fs_evict_inode+0x2a3/0x3a0
  evict+0xba/0x180
  __dentry_kill+0xbe/0x160
  dentry_kill+0x46/0x180
  dput+0xbb/0x100
  do_renameat2+0x3c9/0x550
  __x64_sys_rename+0x17/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is dec_valid_node_count() will trigger kernel panic due to
inconsistent count in between inode.i_blocks and actual block.

To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 622927f3 ]

With below mkfs and mount option:

MKFS_OPTIONS  -- -O extra_attr -O project_quota -O inode_checksum -O flexible_inline_xattr -O inode_crtime -f
MOUNT_OPTIONS -- -o noinline_xattr

We may miss xattr data with below testcase:
- mkdir dir
- setfattr -n "user.name" -v 0 dir
- for ((i = 0; i < 190; i++)) do touch dir/$i; done
- umount
- mount
- getfattr -n "user.name" dir

user.name: No such attribute

The root cause is that we persist xattr data into reserved inline xattr
space, even if inline_xattr is not enable in inline directory inode, after
inline dentry conversion, reserved space no longer exists, so that xattr
data missed.

Let's use inline xattr space only if inline_xattr flag is set on inode
to fix this iusse.

Fixes: 6afc662e ("f2fs: support flexible inline xattr size")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5e159cd3 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203209

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after the this script.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_01.c
./run.sh f2fs
sync

 kernel BUG at fs/f2fs/f2fs.h:1788!
 RIP: 0010:f2fs_truncate_data_blocks_range+0x342/0x350
 Call Trace:
  f2fs_truncate_blocks+0x36d/0x3c0
  f2fs_truncate+0x88/0x110
  f2fs_setattr+0x3e1/0x460
  notify_change+0x2da/0x400
  do_truncate+0x6d/0xb0
  do_sys_ftruncate+0xf1/0x160
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is dec_valid_block_count() will trigger kernel panic due to
inconsistent count in between inode.i_blocks and actual block.

To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 546d22f0 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203217

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_test_05.c
mkdir test
mount -t f2fs tmp.img test
sudo ./a.out
sync

- Messages
 kernel BUG at fs/f2fs/inode.c:707!
 RIP: 0010:f2fs_evict_inode+0x33f/0x3a0
 Call Trace:
  evict+0xba/0x180
  f2fs_iget+0x598/0xdf0
  f2fs_lookup+0x136/0x320
  __lookup_slow+0x92/0x140
  lookup_slow+0x30/0x50
  walk_component+0x1c1/0x350
  path_lookupat+0x62/0x200
  filename_lookup+0xb3/0x1a0
  do_readlinkat+0x56/0x110
  __x64_sys_readlink+0x16/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

During inode loading, __recover_inline_status() can recovery inode status
and set inode dirty, once we failed in following process, it will fail
the check in f2fs_evict_inode, result in trigger BUG_ON().

Let's clear dirty inode in error path of f2fs_iget() to avoid panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 626bcf2b ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203225

- Overview
When mounting the attached crafted image and unmounting it, following errors are reported.
Additionally, it hangs on sync after unmounting.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
mkdir test
mount -t f2fs tmp.img test
touch test/t
umount test
sync

- Messages
 kernel BUG at fs/f2fs/node.c:3073!
 RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300
 Call Trace:
  f2fs_put_super+0xf4/0x270
  generic_shutdown_super+0x62/0x110
  kill_block_super+0x1c/0x50
  kill_f2fs_super+0xad/0xd0
  deactivate_locked_super+0x35/0x60
  cleanup_mnt+0x36/0x70
  task_work_run+0x75/0x90
  exit_to_usermode_loop+0x93/0xa0
  do_syscall_64+0xba/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0010:f2fs_destroy_node_manager+0x2f0/0x300

NAT table is corrupted, so reserved meta/node inode ids were added into
free list incorrectly, during file creation, since reserved id has cached
in inode hash, so it fails the creation and preallocated nid can not be
released later, result in kernel panic.

To fix this issue, let's do nid boundary check during free nid loading.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8b6810f8 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203219

- Overview
When mounting the attached crafted image and running program, I got this error.
Additionally, it hangs on sync after running the program.

The image is intentionally fuzzed from a normal f2fs image for testing and I enabled option CONFIG_F2FS_CHECK_FS on.

- Reproduces
cc poc_06.c
mkdir test
mount -t f2fs tmp.img test
cp a.out test
cd test
sudo ./a.out
sync

- Messages
 kernel BUG at fs/f2fs/node.c:1183!
 RIP: 0010:f2fs_remove_inode_page+0x294/0x2d0
 Call Trace:
  f2fs_evict_inode+0x2a3/0x3a0
  evict+0xba/0x180
  __dentry_kill+0xbe/0x160
  dentry_kill+0x46/0x180
  dput+0xbb/0x100
  do_renameat2+0x3c9/0x550
  __x64_sys_rename+0x17/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is f2fs_remove_inode_page() will trigger kernel panic due to
inconsistent i_blocks value of inode.

To avoid panic, let's just print debug message and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing of potential image corruption.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix build warning and add unlikely]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 98838579 ]

There are some places in where we missed to unlock page or unlock page
incorrectly, fix them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05573d6c ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203239

- Overview
When mounting the attached crafted image and running program, following errors are reported.
Additionally, it hangs on sync after running program.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
cc poc_15.c
./run.sh f2fs
sync

- Kernel messages
 ------------[ cut here ]------------
 kernel BUG at fs/f2fs/segment.c:3162!
 RIP: 0010:f2fs_inplace_write_data+0x12d/0x160
 Call Trace:
  f2fs_do_write_data_page+0x3c1/0x820
  __write_data_page+0x156/0x720
  f2fs_write_cache_pages+0x20d/0x460
  f2fs_write_data_pages+0x1b4/0x300
  do_writepages+0x15/0x60
  __filemap_fdatawrite_range+0x7c/0xb0
  file_write_and_wait_range+0x2c/0x80
  f2fs_do_sync_file+0x102/0x810
  do_fsync+0x33/0x60
  __x64_sys_fsync+0xb/0x10
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is f2fs_inplace_write_data() will trigger kernel panic due
to data block locates in node type segment.

To avoid panic, let's just return error code and set SBI_NEED_FSCK to
give a hint to fsck for latter repairing.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 22d61e28 ]

As Jungyeon reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=203227

- Overview
When mounting the attached crafted image, following errors are reported.
Additionally, it hangs on sync after trying to mount it.

The image is intentionally fuzzed from a normal f2fs image for testing.
Compile options for F2FS are as follows.
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_CHECK_FS=y

- Reproduces
mkdir test
mount -t f2fs tmp.img test
sync

- Messages
 kernel BUG at fs/f2fs/recovery.c:549!
 RIP: 0010:recover_data+0x167a/0x1780
 Call Trace:
  f2fs_recover_fsync_data+0x613/0x710
  f2fs_fill_super+0x1043/0x1aa0
  mount_bdev+0x16d/0x1a0
  mount_fs+0x4a/0x170
  vfs_kern_mount+0x5d/0x100
  do_mount+0x200/0xcf0
  ksys_mount+0x79/0xc0
  __x64_sys_mount+0x1c/0x20
  do_syscall_64+0x43/0xf0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

During recovery, if ofs_of_node is inconsistent in between recovered
node page and original checkpointed node page, let's just fail recovery
instead of making kernel panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>