- 30 Dec, 2006 40 commits
-
-
Avi Kivity authored
Signed-off-by:
Avi Kivity <avi@qumranet.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Avi Kivity authored
Resolves sourceforge bug 1622229 (guest crashes running benchmark software). Signed-off-by:
-
Yoshimi Ichiyanagi authored
The latest version of kvm doesn't initialize kvm_arch_ops in kvm_init(), which causes an error with the following sequence. 1. Load the supported arch's module. 2. Load the unsupported arch's module.$B!!(B(loading error) 3. Unload the unsupported arch's module. You'll get the following error message after step 3. "BUG: unable to handle to handle kernel paging request at virtual address xxxxxxxx" The problem here is that the unsupported arch's module overwrites kvm_arch_ops of the supported arch's module at step 2. This patch initializes kvm_arch_ops upon loading architecture specific kvm module, and prevents overwriting kvm_arch_ops when kvm_arch_ops is already set correctly. Signed-off-by:
-
Avi Kivity authored
Instead of doing tricky stuff with the arch dependent virtualization registers, take a peek at the guest's efer. This simlifies some code, and fixes some confusion in the mmu branch. Signed-off-by:
-
Avi Kivity authored
current_cpu_data invokes smp_processor_id(), which is inadvisable when preemption is enabled. Switch to boot_cpu_data instead. Resolves sourceforge bug 1621401. Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
Sergei Shtylyov authored
The fallback to PIO mode in the hwif->dma_check() handler doesn't work in the Intel PIIX and SMsC SLC90E66 IDE drivers because: - config_drive_for_dma() calls the hwif->speedproc() handler with a wrong mode number (unbiased by XFER_PIO_0) in case of the PIO fallback; - hwif->tuneproc() handler doesn't really set the drive's own speed (this is not fixed as yet). Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Sergei Shtylyov authored
There's no need to check in piix_config_drive_for_dma() for broken MW DMA mode 0 as this mode is not supported by the driver (it sets hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed(). (Alan sayeth "Probably right but if not you've got a subtle corruptor. Should at least stick a BUG_ON mode 0 setting right close when the mode is set.") Signed-off-by:
-
Andrew Morton authored
kernel/lockdep.c: In function `lookup_chain_cache': kernel/lockdep.c:1339: warning: long long unsigned int format, u64 arg (arg 2) kernel/lockdep.c:1344: warning: long long unsigned int format, u64 arg (arg 2) Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Arnaud Patard (Rtp authored
Russel King recently reminded us that one shouldn't use asm/arch/hardware.h but one should use asm/hardware.h. Unfortunately, the spi_s3c24xx_gpio driver is using the wrong header. This patch is fixing that. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Mike Frysinger authored
The KERNELDOC and DOCPROC variables are relative to the $(srctree)/$(objtree) and expect to be run only from there ... attached patch adds proper srctree/objtree prefixes to both variables. Acked-by:
"Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Andrew Morton authored
fs/proc/base.c:1869: warning: initialization discards qualifiers from pointer target type fs/proc/base.c:2150: warning: initialization discards qualifiers from pointer target type Cc: Paul Jackson <pj@sgi.com> Signed-off-by:
-
Shantanu Goel authored
Fix a rather obvious buglet. Noticed while instrumenting the VM using /proc/vmstat. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by:
-
Kyungmin Park authored
Fix apollon board compiler error Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Kyungmin Park authored
Fix GPMC compiler errors on OMAP2 Signed-off-by:
-
David Brownell authored
Return a fault code if the Dataflash driver runs into a "no device present" error when the MISO line has a pulldown (it currently expects a pullup), so that rmmod won't oops. Signed-off-by:
-
David Brownell authored
Fix build issues that show up with the m25p80 SPI flash driver when building with MTD debug enabled. Signed-off-by:
-
David Brownell authored
Some issues were recently turned up with the current specification of what it means for spi_transfer.tx_buf to be null, as part of transfers which are (from the SPI protocol driver perspective) pure reads. Specifically, that it seems better to change the TX behaviour there from "undefined" to "will shift zeroes". This lets protocol drivers (like the ads7846 driver) depend on that behavior. It's what most controller drivers in the tree are already doing (with one exception and one case of driver wanting-to-oops), it's what Microwire hardware will necessarily be doing, and it removes an issue whereby certain security audits would need to define such a value anyway as part of removing covert channels. This patch changes the specification to require shifting zeroes, and updates all currently merged SPI controller drivers to do so. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Al Viro authored
(akpm: macros are wonderful) Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Randy Dunlap authored
RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the CONFIG_PROC_FS block. drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Dimitri Gorokhovik authored
Recent cleanup of slab.h broke SLOB allocator: the routine kmem_cache_init has now the __init attribute for both slab.c and slob.c. This routine cannot be removed after init in the case of slob.c -- it serves as a timer callback. Provide a separate timer callback routine, call it once from kmem_cache_init, keep the __init attribute on the latter. Signed-off-by:
Dimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Dimitri Gorokhovik authored
ramfs doesn't provide the .set_dirty_page a_op, and when the BLOCK layer is not configured in, 'set_page_dirty' makes a call via a NULL pointer. Signed-off-by:
-
Akinobu Mita authored
mod_sysfs_setup() doesn't return error when kobject_add_dir() failed. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andreas Schwab authored
Signed-off-by:
Andreas Schwab <schwab@suse.de> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Ingo Molnar authored
Remove the __resched_legal() check: it is conceptually broken. The biggest problem it had is that it can mask buggy cond_resched() calls. A cond_resched() call is only legal if we are not in an atomic context, with two narrow exceptions: - if the system is booting - a reacquire_kernel_lock() down() done while PREEMPT_ACTIVE is set But __resched_legal() hid this and just silently returned whenever these primitives were called from invalid contexts. (Same goes for cond_resched_locked() and cond_resched_softirq()). Furthermore, the __legal_resched(0) call was buggy in that it caused unnecessarily long softirq latencies via cond_resched_softirq(). (which is only called from softirq-off sections, hence the code did nothing.) The fix is to resurrect the efficiency of the might_sleep checks and to only allow the narrow exceptions. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Mikael Pettersson authored
include/linux/utsrelease.h and include/linux/version.h aren't removed any more by mrproper in kernel 2.6.20-rc2. The patch below fixes this. The definition of MRPROPER_FILES looks weird: generated-headers looks like a misspelling of generated_headers, but that one is a Makefile target, not a variable or a file, so I don't see how including it in MRPROPER_FILES could have any effect. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Signed-off-by:
-
Tilman Schmidt authored
While trying to develop a line discipline I found a couple of things worth mentioning in Documentation/tty.txt which weren't, so I decided to add them. It would be nice if someone more knowledgeable than me in that area would look over them, in case I got something wrong. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jiri Slaby authored
Many spinlock recursion was in the isicom driver. Eliminate it. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Soeren Sonnenburg authored
The apple fn keys don't work anymore with 2.6.20-rc1. The reason is that USB_HID_POWERBOOK appears in several files although USB_HIDINPUT_POWERBOOK is the thing to be used. The patch fixes this. Cc: Greg KH <greg@kroah.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Eric Moore authored
Update to maintainers list. My employer has changed the domain from lsil to lsi. Signed-off-by:
-
Michael S. Tsirkin authored
Commit bed8bdfd ("IB: kmemdup() cleanup") introduced one bad conversion to kmemdup() in mthca_alloc_fmr(), where the structure allocated and the structure copied are not the same size. Revert this back to the original kmalloc()/memcpy() code. Reported-by: Dotan Barak <dotanb@mellanox.co.il>. Signed-off-by:
Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by:
Roland Dreier <roland@digitalvampire.org> Signed-off-by:
-
Jiri Slaby authored
tty_driver->owner is not set, so if somebody remove mxser_module, it might oops (and doesn't tell the user: no way, it's in use). Set the .owner value. Cc: <osv@javad.com> Signed-off-by:
-
Randy Dunlap authored
Don't have macros between a function's kernel-doc block and the function definition. This is not valid for kernel-doc. Warning(/var/linsrc/linux-2.6.20-rc1-git8//drivers/pci/probe.c:653): No description found for parameter 'IORESOURCE_PCI_FIXED' Signed-off-by:
-
Thomas Meyer authored
Due to the changes to make the kernel relocateable a new file is created during the build process. [jirislaby@gmail.com: The .gitigonre was intended to be in arch/ subtree] Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
constrained_alloc(), which is called to detect where oom is from, checks passed zone_list(). If zone_list doesn't include all nodes, it thinks oom is from mempolicy. But there is memory-less-node. memory-less-node's zones are never included in zonelist[]. contstrained_alloc() should get memory_less_node into count. Otherwise, it always thinks 'oom is from mempolicy'. This means that current process dies at any time. This patch fix it. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
-
Ingo Molnar authored
Fix suspend hang: rcutorture threads need to be nofreeze. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Ingo Molnar authored
WARN_ON() ever triggering is a kernel bug. Do not try to paper over this fact by suggesting to the user that this is 'only' a warning, as the following recent commit does: commit 30e25b71 Author: Jeremy Fitzhardinge <jeremy@goop.org> Date: Fri Dec 8 02:36:24 2006 -0800 [PATCH] Fix generic WARN_ON message A warning is a warning, not a BUG. ( it might make sense to rename BUG() to CRASH() and BUG_ON() to CRASH_ON(), but that does not change the fact that WARN_ON() signals a kernel bug. ) i and others objected to this change during lkml review: http://marc.theaimsgroup.com/?l=linux-kernel&m=116115160710533&w=2 still the change slipped upstream - grumble :) Also, use the standard "BUG: " format to make it easier to grep logs and to make it easier to google for kernel bugs. Signed-off-by:
-
Judith Lebzelter authored
Choose rpa_vscsi.c over iseries_vscsi.c when building both pseries and iseries. This fixes a link error. Signed-off-by:
Judith Lebzelter <judith@osdl.org> Acked-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Zach Brown authored
lockdep found a AB BC CA lock inversion in retry-based AIO: 1) The task struct's alloc_lock (A) is acquired in process context with interrupts enabled. An interrupt might arrive and call wake_up() which grabs the wait queue's q->lock (B). 2) When performing retry-based AIO the AIO core registers aio_wake_function() as the wake funtion for iocb->ki_wait. It is called with the wait queue's q->lock (B) held and then tries to add the iocb to the run list after acquiring the ctx_lock (C). 3) aio_kick_handler() holds the ctx_lock (C) while acquiring the alloc_lock (A) via lock_task() and unuse_mm(). Lockdep emits a warning saying that we're trying to connect the irq-safe q->lock to the irq-unsafe alloc_lock via ctx_lock. This fixes the inversion by calling unuse_mm() in the AIO kick handing path after we've released the ctx_lock. As Ben LaHaise pointed out __put_ioctx could set ctx->mm to NULL, so we must only access ctx->mm while we have the lock. Signed-off-by:
Zach Brown <zach.brown@oracle.com> Signed-off-by:
Suparna Bhattacharya <suparna@in.ibm.com> Acked-by:
Benjamin LaHaise <bcrl@kvack.org> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Signed-off-by:
-
Sebastien Dugué authored
set_param_str() cannot use kstrdup() to duplicate the parameter. That's fine when the driver is compiled as a module but it sure is not when built into the kernel as the kernel parameters are parsed before the kmalloc slabs are setup. Signed-off-by:
Sebastien Dugué <sebastien.dugue@bull.net> Acked-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
