- 19 Jun, 2009 40 commits
-
-
Bill Pemberton authored
Signed-off-by:Bill Pemberton <wfp5p@virginia.edu> Cc: Evgeniy Polyakov <zbr@ioremap.net>
-
Bill Pemberton authored
Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Mithlesh Thukral authored
Remove Lindent changes as a TODO item in the wlan-ng directory of staging tree. Signed-off-by:
Mithlesh Thukral <mithlesh@linsyssoft.com> Signed-off-by:
-
Mithlesh Thukral authored
Lindent script cleanups in wlan-ng driver in the staging tree. This is a item in the TODO list. Signed-off-by:
-
Julia Lawall authored
The expression !(ext->alg & IW_ENCODE_ALG_WEP) appears to be incorrect, because there are several possible values for ext->alg that give 1 when bit-anded with IW_ENCODE_ALG_WEP. Therefore Richard Kennedy suggested to rewrite the code with != Added \n at the end of the debug string as well. Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Karl Relton authored
Change uses of KERN_DEBUG over to pr_debug to match original driver where messages are only needed during driver development. Signed-off-by:
Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by:
-
Karl Relton authored
Move prism2 firmware loading from userspace into driver, using linux request_firmware(). Firmware is now loaded (if available) on device probing, before it is registered as a netdevice and advertised to userspace. Signed-off-by:
-
Tim Gardner authored
The commit 'mac80211: unify config_interface and bss_info_changed' from Johannes Berg <johannes@sipsolutions.net> removed the config_interface structure tag from struct ieee80211_ops. The BSSID detection functionality migrated to ieee80211_ops.bss_info_changed. Since wbsoft_config_interface() was largely empty, there wasn't much to do other then to remove the function itself. There is currently no support for BSSID change detection. Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Pekka Enberg authored
Impact: cleanup The remaining functions are local to phy_calibration.c so move them there and remove wbhal.c. Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Pekka Enberg authored
Impact: cleanup It's a trivial wrapper that is used in only one place, so lets inline it. Acked-by:
-
Pekka Enberg authored
Impact: cleanup This patch moves all the functions in wbhal.c that are used only in wbusb.c to the latter file. Acked-by:
-
Pekka Enberg authored
Impact: cleanup In preparation for merging wbhal.c with wbusb.c, use Lindet to reformat the file. Acked-by:
-
Pekka Enberg authored
Impact: cleanup No need to keep read-only data on the stack. Acked-by:
-
Pekka Enberg authored
Impact: cleanup The contact details in MODULE_AUTHOR do not reflect current state of affairs so remove it. Acked-by:
-
Pekka Enberg authored
Impact: cleanup Use scripts/Lindent on the file and clean up the rest by hand. Acked-by:
-
Pekka Enberg authored
Impact: cleanup The hal_set_phy_type() is called in wb35_hw_init() only so inline the function there. Also remove a redundant assignment of ->phy_type to RF_WB_242_1. Acked-by:
-
Pekka Enberg authored
Impact: cleanup Remove some useless comments and clean up others. Acked-by:
-
Pekka Enberg authored
Impact: cleanup Now that hal_halt() is called from wb35_hw_halt() only where ->InitialResource is always set to 4, we can simplify hal_init_hardware() and hal_halt(). Acked-by:
-
Pekka Enberg authored
Impact: fix, cleanup If initialization in hal_init_hardware() fails, we call hal_halt() to clean up and release resource. However, hal_halt() will attempt to call del_timer_sync() on ->LEDTimer on "stage 3" although it's not initialized at that point. Fix that up by simplifying error handling logic in hal_init_hardware() with gotos. Acked-by:
-
Pekka Enberg authored
Impact: cleanup Use gotos to simplify the deep if-statement nesting in hal_init_hardware(). Acked-by:
-
Pekka Enberg authored
Impact: cleanup Change hal_init_hardware() to return an error code rather than a boolean to simplify error handling in wb35_hw_init(). Acked-by:
-
Pekka Enberg authored
Impact: cleanup The hal_init_hardware() and hal_halt() functions are only used in wbusb.c so move them there. Acked-by:
-
Pekka Enberg authored
Impact: cleanup This patch replaces the switch-based error handling in wb35_hw_init() with regular gotos. Acked-by:
-
Pekka Enberg authored
We don't initialize hardware multicast filter in the driver nor do we know how to do that. Therefore, remove some code that isn't actually used from wbsoft_configure_filter(). Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Diego Liziero authored
The semantic patch that makes this change is: (http://www.emn.fr/x-info/coccinelle/) @@ expression E; constant C; @@ ( - !E == C + E != C ) Signed-off-by:
Diego Liziero <diegoliz@gmail.com> Signed-off-by:
-
Roel Kluin authored
Do not go beyond ARRAY_SIZE of wd->ap.wds.encryMode Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Dragoslav Zaric authored
Signed-off-by:
Dragoslav Zaric <dragoslav.zaric.kd@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: Leon Woestenberg <leon@sidebranch.com> Signed-off-by: -
Roel Kluin authored
`!' has a higher precedence than `&' and `|' has a higher precedence than `?' Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Huang Weiyi authored
Remove unused #include <linux/version.h>'s. Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Huang Weiyi authored
Remove dupilcated #include in drivers/staging/rt3070/rt_linux.h. Signed-off-by:
-
Roel Kluin authored
wmm_param[1].ac_aci_acm_aifsn was tested twice, the second should have been wmm_param[3].ac_aci_acm_aifsn. Signed-off-by:
-
Alexander Beregalov authored
Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jean Delvare authored
Use the recently added to_delayed_work() helper function. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Anders Kaseorg authored
The use of sprintf() to append to a buffer, as in sprintf(buf, "%sEntry: %d\n", buf, i) is not valid according to C99 ("If copying takes place between objects that overlap, the behavior is undefined."). It breaks at least in userspace under gcc -D_FORTIFY_SOURCE. Replace this construct with sprintf(buf + strlen(buf), "Entry: %d\n", i) This patch was automatically generated using perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g' perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g' Signed-off-by:Anders Kaseorg <andersk@mit.edu> Signed-off-by:
-
Anders Kaseorg authored
The use of sprintf() to append to a buffer, as in sprintf(buf, "%sEntry: %d\n", buf, i) is not valid according to C99 ("If copying takes place between objects that overlap, the behavior is undefined."). It breaks at least in userspace under gcc -D_FORTIFY_SOURCE. Replace this construct with sprintf(buf + strlen(buf), "Entry: %d\n", i) This patch was automatically generated using perl -0pe 's/(sprintf\s*\(\s*([^,]*))(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3$4/g' perl -0pe 's/(snprintf\s*\(\s*([^,]*))(\s*,[^,]*?)(\s*,\s*")%s((?:[^"\\]|\\.)*"\s*,)\s*\2\s*,/$1 + strlen($2)$3 - strlen($2)$4$5/g' Signed-off-by: -
Alessio Igor Bogani authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
Alessio Igor Bogani <abogani@texware.it> Signed-off-by:
-
Jean Delvare authored
The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by:
-
Alessio Igor Bogani authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
